EA4500 with manually updated firmware and wireless IOS devices DROP CONNECTIONS

i immediatly manually updated the firmware on my ea4500 to the newest version.
to get my ipad2 and/or iphone to work with my router after they have been sitting idle for a long time, say overnight i must turn them off and turn them back on or restart the router.
i have time warner cable<ooma telo<ea4500.
i never had this problem with this setup with my ea3000.
any help would be appeciated.

I think the easier "Factory Defaults" will be sufficient in most cases (as long as you stay with Cisco factory firmware, which sofar will be true for the E4200v2 and EA Series).
Step 1: Write down (or make screen copies) of all the setting changes you made compared to "default".
Step 2: Use a wired connection from Router to PC, with the PC set to DHCP or an IP address within the Routers range.
Step 3: Administration>Factory Defaults>Restore Factory Defaults
Step 4: Wait 5 minutes.
Step 5: Login to 192.168.1.1 with the default Username: admin and Password: admin
Step 6: Manually bring all your required settings back in, as noted in step 1.

Similar Messages

For those of you with a Windows computer and the iOS device is not syncing or showing up in iTunes. here is a known solution that has been working for tech support!

I know this seems to be an emerging issue ever since the update to iTunes 11.1.4, some iPhones or other iOS devices are not showing up in iTunes or syncing. I'm not sure if Apple really knowns of this issue, but tech support has a (mostly) sure fire way of resolcing this issue. It's only for Windows computers though.
Go to the article http://support.apple.com/kb/ts1538 and follow the Section 5 Verify Apple Mobile Device USB driver is installed. When you clik on that section, go to your version of Windows (it seems to be happening mostly across Windows 8) . And then to the section: If Apple iPod, Aple iPhone, or Apple iPad is listed.
The gist of what you need to do:
Windows 8 (since it seems to be the most affected) move your cursor to the upper ight corner of your screen) and click on the Magnifying glass. Type in devmgmt.msc and this should bring up the Device Manager. Onc eyou are in the device manager, look for the "Portable device" or "Universial Serial bus Controller" list, and you should see the "Apple iPhone/iPad/iPod" listed. Onc eyou see it, right click it, choose "Update software driver." Now, IT WILL SAY THE DRIVER IS UPDATED. I CANNOT STRESS THIS ENOUGH. Select "Browse my computer for driver software." Onc eyou choose that, select "Let me pick from a lsit of drivers on my computer." You should see the option "Have Disk." Choose that. Again, I KNOW you do not have a physical disk, but the file we need is already on your computer. After Hard Disk, choose Browse again. Follow this file path to the file we need: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.. In the Driver's folder, you should see the "usbaaple" or "usbappl64" (if you have the 64 bit for Windows). Double click on that file, and hit OK. The file should install, and once it's finished check your iTunes!!! You may want to unplug your device and plug it back it before doing all of this. I REALLY hope this works for you all as well!

How can I change my file extension from m4p to something else? I have had no success being able to play or burn my purchased music. I keep getting error 2122. If I can change the format I should be able to move it to another player or at least burn it in Nero. Thanks.
Angie

I just updated firmware and it dosen't work.

I bought my router EA6500 and just updated firmware and it became a brick.The logo light keeps blingking and I can't even go into the setup.I downloaded the latest firmware and manually updated.It seemed went ok everything and said it's going to reboot but it went into this blingking mode.Is it because I did something wrong or it's because I bought a refurbished product.

Where was the firmware downloaded? Was it from the Linksys website? Resetting the router may straighten this up. Press and hold the reset button for 10 to 15 seconds. Then, reboot and reconfigure it. I'm not sure which version do you have but you may check it on the system label that is found underneath the device. Select the correct hardware version and download the firmware from this link. Once accomplished, reset again the router and configure it. If the same thing will happen, it's best to contact Linksys and have it replaced.

I can not update or restore any ios device with my iTunes in my macbook but I can with my pc, why?

I can not update or restore any ios device with my iTunes in my macbook but I can with my pc, why?

WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PM

I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John

Problems between HP network printer, WRT55AG, and wireless-G devices...help!

I'm having a weird problem that I just can't figure out. If I connect my HP LaserJet 2605dn printer via Ethernet to my WRT55AG router, all of the devices on my network (wireless-A, Ethernet) can see/access the printer except for the wireless-G devices. However, if I connect the printer via Ethernet to a wireless-G bridge, and then use the bridge to connect wirelessly to my router, my wireless-G devices can access the printer without any problems.
Here's a little more info. If I reset the router, the wireless-G devices are able to access the printer (connected to the routher via Eithernet) up until the point when I enable WEP...then the printer is inaccessible from the wireless-G devices. I've made sure that all of my WEP keys are correct; besides, the wireless-A devices can access the printer with WEP enabled and the wireless-G devices can connect to all the other devices on the network.
I suspect that something is screwy between the printer and the router. Using the wireless bridge is an acceptable work-around, but it bugs me that I can't get this working the "right" way.
Oh yeah...the firmware on both the printer and the router is up-to-date.

Have you tried reinstalling the drivers for the printer?

Lightroom Mobile allows you to share collections between your computer and your iOS devices. How about computer to computer?

If I edit on my computer, the edit shows up on my iPad and edits I make on my iPad show up on my computer. Do they allow you to share the same between two computers? I have used the work around of exporting as a catalog, but that is a pain and must be done each time I move from one computer to the other. I usually don't know when I am going to be using one or the other. My collections are rather large and it takes a long time to export them as a catalog and more time to transfer them and more time still to import them. I wish they would allow a shared catalog or collection, so multiple computers, such as a desktop and notebook could work seamlessly together on the same images. I would like to be able to edit on one and have the changes reflected on the other. My desktop is far more powerful than my notebook and has 4 times the screen to work on. I prefer to use it for editing, but as a landscape photographer, I travel all over for weeks at a time and so I have plenty of time to work on the road. If they have a way for me to do it back and forth with a computer and an iOS device, I don't see why they can't make it happen for computer to computer. The export collection as a catalog really is not a solution. If they don't allow computer to computer, has anyone tried going from one computer to an iOS device and then to a different computer? In other words, using the iPad as a middle man between desktop and notebook?

This would be great but it isn't possible at the moment. You can't use the iOS device as the middle man as you propose. As soon as you uncouple one desktop you lose the cloud images and it will only sync with one Mac or Windows machine at a time. Undoubtedly this has to do with the use of the lossy dng for the files. On the desktop machine you are going to expect full resolution images which would take exponentially more storage on the cloud servers than the heavily downsized lossy compression dng files that are used now. 30MB raw originals are scaled down to a 1MB smart preview dng which is what is uploaded to the "cloud." On the iPad it doesn't matter much that you get very low resolution and lossy compression as you can still do some minor editing, but on your desktop you don't want to only have files like that. Syncing full res files over the cloud is going to be quite slow and is going to be quite expensive for Adobe, which is likely why we don't have it yet.

HT201210 you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues th

you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do? Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone. I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address. I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

Hi, my iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there eny way I can get rid of this?

Hi,
My iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there any way I can get rid of this annoying problem? The bottom line is that I'll stay away from apple, because they basically make it so the devices control you, and you don't control the devices. I've even jail broken to try and fix this. I need my USB drives to work as they have many folders. Formatting doesn't work, so it is definetly down to the software and it's restrictions.
Please help.

The camera connection kit is to be used to connect a camera or an SD card and transfer photos/video. You can't fault them for something that happened to work and doesn't any longer. There are drives like the seagate available if you need access to extra storage
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/goflex -satellite/

I want to hard line time capsule to imac so uverse router, modem, and wireless is the primary connection?

i want to hard wire time capsule to imac, so att uverse's modem, router, and wireless is the primary connection. i don't think the competing wireless features will play nice together.

If your goal is to provide Internet access to the iMac via an Ethernet connection to the TC ... and, in turn, have the TC connected by wireless to the Uverse gateway, then as you have already guessed, this combination won't work as the two routers are not WDS compatible. Your only option with this set of networking gear would be to connect the TC to the Uverse gateway by Ethernet.

ICloud does not automatically update apps across my iOS devices

I have observed that NEW app downloads are synched through my iPhone / iPad / iMac without problem, but when I UPDATE an app in one device those updates are not sent to the others, even after (wireless) synching the device. So, I need to manually update the apps in every device I own.
Is this the normal behaviour of iCloud update? If it is, it really diminishes the value of app management through iCloud, in my opinion.

It won't force you to do anything.
We will find out more when it is actually released.

Why iPhone And Other iOS Devices Dont Have Kannada Language Keyboard...?

All Over The World There Are 7+ Crore Kannada Speaking Knowing People Is There.Millions Kannada Of People Using iPhone And Other iOS Devices.In Indian Language There Is Only 2 Laguage Keyboards Are Installed.What About Other Languges??? We Are Requesting To Add Kannada Language Keyboard On iOS Devices.Hope You'll Accept My Request...Thank You...:-)

Guru,
I have been requesting the Kannada keyboard for ios devices for last 5 years. I have made several phone calls, but for ios the only way to request feature is to fill the form
http://www.apple.com/feedback/
but the good news is that ios 8, they have mentioned support for Indian languages in the keynote. I have installed the ios 8 beta-1 on iphone 5s to check the same. Kannada is listed under the language setting for the first time, where as earlier versions had Kannada listed only under region setting. So Kannada keyboard could be added in subsequent betas. Mac OS already has Kannada keyboards in 2 styles. So, its not off the radar of apple.
Worst case scernario, if apple doesn't add it, never mind. ios 8 will have the ability to install third party keyboard with system wide support for the first time. Somebody will develop the keyboard and sell it for a dollar or two. I use "Kannada Keyboard for iOS" by Todd Kramer. Right now, it works only within its app. But once iso 8 is released, one of these guys with create the keyboard system wide, if apple doesn't add it.
Thanks for the interesting question.
Rajanna
Jai Karnataka Mathe

With itunes match live on my iOS devices, can I now remove all local music files from my PC to free up space? There's no need to keep it if it will always be in the cloud. Right?

With itunes match live on my iOS devices, can I now remove all local music files from my PC to free up space? There's no need to keep it if it will always be in the cloud. Right?

With itunes match live on my iOS devices, can I now remove all local music files from my PC to free up space? There's no need to keep it if it will always be in the cloud. Right?

All my mail have disappeared From my mac and my iOS devices. Seemingly from the iCloud server as well. How can I recover them?

All my mail have disappeared from my mac and my iOS devices. Seemingly from the iCloud server as well. How can I recover them?

Well, you can't since the emails are stored on icloud's mail server. Try this test, using a computer's browser, log into icloud.com and check the mail page. If they are gone, then they are really gone.
Now, I thought I could go into a Time Machine backup and view old emails from a day ago. Unfortunately, Time Machine doesn't seem to save icloud based email, since regardless of the past date I go to, only the current emails show up, not older ones. My conclusion is that I wouldn 't be able to recover them from a TM backup.
What had you been doing on the mac or device that causes emails to be deleted? (I hope you don't have a family member or friend using the same icloud account - they may have deleted all emails by mistake.)

EA4500 with manually updated firmware and wireless IOS devices DROP CONNECTIONS

Similar Messages

Maybe you are looking for