(EA4500). With static IP assigned, how to tell of devices are connected?

I've assigned static IPs to all of my network devices.
Logging onto the router, there does not appear to be any way to tell whether any device is connected or not.  Is this normal?

Static IP assignments are only done on the device itself. You switch the device from DHCP to static IP and configure everything on the device itself.
DHCP reservation is not a static IP assignment. It's telling the DHCP server to assign a specific IP address to a specific device. The device still runs on DHCP and cannot tell whether the IP address received is the IP address reserved or not. That's something entirely different and not to be confused with static IP.
Linksys routers never showed a complete list of connected devices. As mentioned before, you can only see the list of wireless devices associated. You won't see wired devices with static IP nor DHCP reservation and even the DHCP client list is often incomplete...

Similar Messages

  • How can I tell what devices are connected to my e2000

    I have a cisco e2000.  I just turned off guest access, but 'cisco connect' says I still have 4 devices conneted to my router.  Is there a way I can tell what those devices are?
    Also, even thoug the setup said my guest access had a password, I found out it did not.  Any concerns about nosy neighbors?

    Try to install Network Magic. It will show you what are the devices connected to your router. You can download it from here.

  • How do I see what devices are connected to my iTunes

    How do I tell what devices are connected to my iTunes

    You can't see what devices and/or computers that your account is logged into, all you can do is see which (if any) are associated to your account : iTunes Store: Associating a device or computer to your Apple ID.

  • How can I tell the device is connected to itunes 12?

    how can I tell the device is connected to itunes 12?  I have Windows 8.  I hear that the device is connected, but don't see the device to manage.  Only thing that happens is on the phone it says Trust the computer..   I say Trust and nothing happens.

    in ituens at the top where you see the small icons for Music, Movies, TV etc when your device is connected you will see a small icon representing your phone or ipad etc popup click that and it will show you the usual interface for backup and syncing.
    if that doesnt happen, like it didint for me initially, you should close itunes fully via task manager if you know how to do this and start it again with the device unplugged then plug it in after itunes has finished loading.
    Worst case scenario you nee to resatrt

  • How can I tell how many devices are connected my itunes account via icloud?

    How can I tell how many devices are connected my itunes account via icloud?

    I only know what it says in the article.  There it specifically says "iOS device" and it says. "You can view which devices or computers are  currently associated," and, "Next to each device or computer name, you will be able to see when each was associated to your Apple ID."  However, this is all in the context of, "When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID."  I guess if somebody simply logs in it won't show.

  • I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime.  All of these devices are connected to itunes through the one account.  How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

    I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime.  All of these devices are connected to itunes through the one account.  How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

    I started to do that then it said that this will become their apple I.D or similar and then I thought that will disconnect them from the same iTunes?  I want them still on my iTunes as they are only young (8 and 10)?  Or have I got this all wrong and even if I do set them up with a different e-mail will they still be on my itunes?  For example if they want to purchase an App will it still go through my account even if they use their ipod?

  • How can i tell what devices are accessing my iMessages?

    I suspect someone has set up an iPad to download my iMessages without my authorization. How can I tell what devices are linked to my phone's iMessaging?

    Thank you both. I am changing my password...I was just hoping there was some way I could tell if this other person had been reading my iMessages up to this point. It seems like there is not. How about this scenerio: I turn off the iMessaging on my phone. I have someone who has iMessaging send me an iMessage. We see if their device registers their message as "delivered" even if it doesn't come through to my phone. Would that indicate then that it had been delivered to another device?

  • When I send emails with photos from iPhoto recipients often tell me images are upside down.  What would cause that?

    When I send emails with photos from iPhoto recipients often tell me images are upside down.  What would cause that?

    Found this :
    https://discussions.apple.com/thread/3431867?start=0&tstart=0
    by doing this :
    http://www.google.com/search?q=images+are+upside+down+ios

  • Help!!! How can I see what devices are connected to my icloud

    How do I know what devices and computers are linked to my icloud? Used it once at my ex boyfriends house on his computer and I think my photo stream is going to his desktop??? How can I tell and if so disconnect from it?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    Depending on whether a device is connecting using Ethernet or wireless, you need to know the Ethernet ID or AirPort ID of the device. That is the number that is associated with the IP address that is displayed in AirPort Utility.
    For example, if you have a Mac....
    Open System Preferences (gear icon on the dock) and open Network
    Click on AirPort , then click Advanced at the lower right
    The AirPort ID of the Mac is displayed at the bottom of the window
    For the Ethernet ID, click on Ethernet, then click Advanced, then click the Ethernet tab
    The Ethernet ID is displayed at the top of the window
    On an iPhone.....
    Tap the Settings icon, tap General, tap About, then scan down to locate Wi-Fi Address, also known as the AirPort ID.

  • How can i see which devices are connected to my wireless network?

    how can i see which devices are connected to my wireless network?

    Login to your router and view the DHCP clients.

  • How can i see what devices are connected to my icloud?

    I want to know if pictues from my mac are on any other devices. How can i see what other devices i have connected to my icloud?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How ABAP and JAVA stacks are connecting

    Hi Experts,
    I have a doubt in pi. We are developing Message Mapping in IR, it means it is running on JAVA STACK. But we are checking any mapping error in SXMB_MONI which will run on ABAP STACK.
    Now My doubt is " How JAVA and ABAP stacks are connecting to each other and How we are able to see Mapping error in Integration Engine which resides on ABAP stack even though we create Mapping in IR which runs on Java".
    Thanks&Regards ,
    Gajapathi.

    Hi Gajapathi,
    How JAVA and ABAP stacks are connecting to each other
    PI manages using single database for both JAVA and ABAP servers. But both access them using different schema. They connect using RFC protocol via SAP Java Connector (JCo Connector).
    How we are able to see Mapping error in Integration Engine
    which resides on ABAP stack even though we create Mapping in IR which runs on Java".
    So when you create a object be it mapping or interface or any XI objects, it is stored in Single Database. When you use ABAP sxmb_moni for monitoring the message, it uses ABAP related schema to access the message.
    I hope it answers you query.
    Regards
    Ramesh

  • How to identify which server are connected in a switch?

    Hi,
    Many servers are connected to a switch?
    How to identify what server are connected to which port remotely?
    Thanks!
    Samuel

    Hi Sam,
    just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
    Protocol Address Age (min) Hardware Addr Type Interface
    Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
    to know on which port it is connected, just issue the command as mentioned below
    sh mac-address-table address 0800.6913.710e
    Mac Address Table
    Vlan Mac Address Type Ports
    2 0800.6913.710e DYNAMIC Po1
    hpe this will help you to identify your servers.
    rate this post.

  • Why cant i sync my devices with this new version of iTunes? my devices are suddenly not being recognized.

    why cant i sync my devices with this new version of iTunes? my devices are suddenly not being recognized. HELP!

    Connect your iPod, iPhone, or iPad to your computer and select your device.

Maybe you are looking for