EA4500 would not allow web GUI mgmt session any longer?

Hi everyone,
The strangest thing -- EA4500 would not allow web GUI mgmt session any longer?
It worked just fine for 6 moths; now if I try to manage it using the web gui it would authenticate fine but right after correct password is entered it will sit with the little spinning wheel forever:
Remedies that did NOT work:
1. Rebooted several times
2. Flashed firmware using the tool FW_EA4500_2.1.39.145204.SSA.zip
3. Tried several different browsers
4. Same as number 3 above but from another laptop
Otherwise the router's functions are 100% operational; both wireless and hard-wired; works; performance is as expected in terms of speed; port forwarding works; lights work as expected.
So what's left? I really would like to avoid reset to factury configuration as I have ton of settings which I didn't ducoment back in the day when it was installed.
Thanks everyone for your suggestions!

Hi bbiandov,
You may disconnect your modem from the router and try to access the user interface again. If you can't access the page still, you may need to reset the router and reconfigure it.
Help, learn and share

Similar Messages

  • Pages will not allow me to retrieve documents any longer.  No update available, but the message tells me to update in the App Store!

    I'm completely updated, except for two unimportant apps that seem to have some sort of glitch, and no new update is showing up for Pages, yet when I try to retrieve my documents, the message says, "You need a newer version of Pages to open this document".   The only thing that I see when I go into the App Store is a new version for $19.99.   How can I update without paying?  I just want to print my documents for safety and then never use Pages again.

    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has not only managed to confuse all its users, but also itself.
    Note: Apple has removed over 90 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • I received an Iphone 5 as a gift two days ago. The first thing I did was set up ICloud for photos. Itunes would not allow me to add songs to my new phone without restoring it, yet when I did this, it deleted all photos. And I cannot find them anywhere.

    I received an Iphone 5 as a gift two days ago. The first thing I did was set up ICloud for photos. Itunes would not allow me to add songs to my new phone without restoring it, yet when I did this, it deleted all 129 photos of my graduation and friends from the past two days. And I cannot find them anywhere, photo stream, ICloud, nothing. Where can I get back my memories?

    Were the photos taken by your new iPhone?  If so, did you not import them off your phone to your computer (as you would any other digital camera) before the restore?  If not, restoring wiped the data off the phone and your pictures are gone.
    Sounds like a good time to (re)read the User Guide.

  • TS1440 I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to.button to repair/verify is there but cant be

    I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to. The buttons to repair and modify we're there but they were grey and couldn't be pressed.

    Were you trying to repair the disk you were booted from? You can't do that - you need to boot from your install disk, and choose 'Disk Utility' from the 'install' menu.

  • My daughter has somehow figured out how to register for her own Apple ID but is very underage. She is not giving me the correct info for me to get into her email. She has downloaded some apps that I would not allow. How can I recover her Apple ID info?

    My daughter has somehow figured out how to register for her own Apple ID but she is very underage. She is not giving me the correct info for me to get into her email. She has downloaded some apps that I would not allow. How can I recover her Apple ID info?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • HT1369 i have a old i pod that i use to used and i stop useing it for a few years and now i have a i phone and i want to put all my music on my i pod in to my iphone and it would not allow me to do so what can i do

    i have a old i pod that i use to used and i stop useing it for a few years and now i have a i phone and i want to put all my music on my i pod in to my iphone and it would not allow me to do so what can i do

    You need to move the music from the iPod to your iTunes library on your computer then sync with the iPhone.
    Assuming you have a PC you can use this: http://www.yamipod.com/main/modules/home/

  • HT4847 I have been trying to pay £7.99 for my icloud storage but the online would not allow me to enter new card details as the one you have has expired ?

    I have been trying to pay £7.99 for my icloud storage upgrade but the online would not allow me to enter new debit card details as the one you have has expired ?
    How can I entre new card details to do so?

    You have to change the card in the 'Account' section of the iTunes Store, in 'Payment details'.

  • COMMIT is not allowed in a subordinate session

    In My Servlet, I am using JTA transaction which is not a CMT.
    I am running this on Oracle XADatasource.
    When I'm trying to perform the DB operation, I'm getting the
    Exception saying "COMMIT is not allowed in a subordinate session "
    My Servlet code is :
    public class BatchServlet extends javax.servlet.http.HttpServlet implements
              javax.servlet.Servlet {
         PrintWriter out = null;
         @PersistenceUnit(unitName="PERUNIT")
         EntityManagerFactory emf;
         EntityManager em;
         @Resource
         UserTransaction utx;
         protected void doGet(HttpServletRequest request,
                   HttpServletResponse response) throws ServletException, IOException {
              out = response.getWriter();
              try {
                   initEM();
                   utx.begin();
                   updateDB();
                   utx.commit();
              } catch (Exception ex) {
                   ex.printStackTrace(out);
                   utx.rollback();
              } finally {
                   closeEM();
         public void initEM() throws Exception {
              em = emf.createEntityManager();
         public void closeEM() {
              if (em != null) {
                   em.close();
         private void updateDB() throws Exception {
              Address address = em.find(Address.class, 50030L);
              out.println("County :: " + address.getCounty());
              address.setBuildingNumber("Building # ABC");
              em.persist(address);
              out.println("Before Flush");
              em.flush();
              out.println("After Flush");
         public BatchServlet() {
              super();
    }My Persistence.xml is
    <?xml version="1.0" encoding="UTF-8"?>
    <persistence version="1.0"
         xmlns="http://java.sun.com/xml/ns/persistence"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
         <persistence-unit name="PERUNIT" transaction-type="JTA">
                  <provider> org.eclipse.persistence.jpa.PersistenceProvider</provider>
                  <jta-data-source>MYXADS</jta-data-source>
                  <class> com.test.Address</class>
                <properties>
                     <property name="eclipselink.logging.level" value="CONFIG"/>
                     <property name="javax.persistence.jtaDataSource" value="jdbc/MYXADS"/>
                     <property name="eclipselink.logging.level" value="FINE"/>
                </properties>
         </persistence-unit>
    </persistence>

    What if, in stead of using the UserTransaction, you simply use em.getTransaction().begin() and em.getTransaction().commit() to start / end the transaction? It seems to me the UserTransaction object represents a completely different transaction environment than your entity manager wants to use.

  • Ora-02089-COMMIT is not allowed in a subordinate session - V'urgent pls

    All,
    BPEL version: 11.1.1
    I have to invoke a pl/sql procedure which inserts a data to a table. After insert, I used commit. When BPEL try to invoke this procedure, I got ora-02089-COMMIT is not allowed in a subordinate session+. I know without commit in pl/sql, BPEL does the commit. But for a requirement, I've to explicitly use COMMIT inside the procedure. How do I go about in this case?
    Please advise.
    Thanks,
    Sen

    IMHO.... I personally do not like using XA data sources most of the time. I can only think of a few scenarios in all my implementation where I had to undo all the 50 steps (in which case they should be a single call anyway). Mixing and matching "pragma autonomous transaction" calls with DBAdapter updates on a XA data source in a single process have gotten me into tremendous trouble and data corruption.
    Also if you really have a case where you dont want to commit, I believe you can use the idempotent flag on partnerlinks to avoid the commit. There also might be cases where the PL/SQL defined as "pragma.." might be used by other non-BPEL stuff and you are just opening DB connections even when you dont need to.

  • How to disable Refresh,Reload in browser and user should not allow to multiple browser sessions ?

    Dear All,
    How to disable Refresh,Reload in browser and end user should not allow to multiple browser sessions in portal.Where we need to configure the settings or any code in masthead or any other component. My server version is 7.4 - SP5 .Please help us.
    Thanks for advance,
    BR,
    Durga Rao.

    Dear all,
    i am able to logoff the click refresh button on keyboard.I am using this code to log off the user into the portal.
    document.onkeydown = function(e)
      var key;
      if (window.event) key = event.keyCode
      else
      var unicode = e.keyCode ? e.keyCode : e.charCode
      key = unicode
      switch (key)
      { //event.keyCode
      case 116: //F5 button
        LSAPI.sessionPlugin.logoff();
      event.returnValue = false;
      key = 0; //event.keyCode = 0;
      return false;
      case 82: //R button
      if (event.ctrlKey)
    LSAPI.sessionPlugin.logoff();
      event.returnValue = false;
      key = 0; //event.keyCode = 0;
      return false;
      case 91: // ctrl + R Button
    LSAPI.sessionPlugin.logoff();
      event.returnValue= false;
      key=0;
      return false;
    Thanks.
    But i am unable to control the multiple windows opening the browser.So any one can tell me the how to block the new window and new tab/duplicate tab option.
    BR,
    Durga Rao.

  • HT204266 if i purchase an app today  can i download it on my ipad next week when i buy the ipad.....also i noticed on another purchase attempt  the site would not allow me to type in my 3 digit security code?  what next??

    if i purchase an app today  can i download it on my ipad next week when i buy the ipad.....also i noticed on another purchase attempt  the site would not allow me to type in my 3 digit security code?  what next??

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Windows 7 would not allow me to uninstall itunes, and now will not let me reinstall?

    Windows 7 would not allow me to uninstall itunes, so I tried installing Windows Installer Clean Up and couldn't find it anywhere on my programs. After that I then decided to delete everything related to itunes and tried to re-install, however it didn't let me and said I need to contact technical support? What do I do from here? Anyone?!?!

    Hi braddyloopy,
    Thanks for visiting Apple Support Communities.
    If you need to uninstall and reinstall iTunes,  your music files should not be erased or affected in any way. It is always a good idea to back up your data before making any changes to your computer, though.
    If you'd like to locate your music, this article explains how to find the files:
    Where are my iTunes files located?
    http://support.apple.com/kb/HT1391
    When you reinstall iTunes, I'd recommend using the method in this article to make sure it's reinstalled completely:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Cheers,
    Jeremy

  • ITunes Store would not allow me to purchase an album. The store said that I needed to answer a security question.  I had not sent answers to ant security questions previous

    I have been using iTunes for almost two years.  I went to purchase an album and the store would not allow me to purchase until I had answered security questions.  I had never given answered to any questions previously.  So i didn't know the correct answer.  What do I need to do?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • I want to cancel my subscription, it is not user friendly, when I to convert a scanned document it would not allow me to.  I would like a refund and cancel my annual subscription.

    I purchased this because I could scan a document and be able to fill out anything with my computer instead of writing everything in.  It would not allow me to do this, stating the program I purchased was not capable.  I would like a refund and cancel my annual subscription.
    Thank you

    Dear Sara,
    I feel you are selling a product that does not work.  Seeing all the msgs stating this, I feel you should pull the product.  I got taken - you should refund - knowing you have a product that is defective.  I learned - word of mouth is the best advertising you will get and I will post on my Facebook - do not buy from Adobe!
    Not mad just disappointed in the product and customer service.
    Thanks

  • I tried to install an app from Channel 4 in the UK and got a message that my account would not allow that. Now I appear to be permanently connected to the UK ITunes Store. How to get back to the USA store?

    I tried to install an app from Channel 4 in the UK and got a message that my account would not allow that. Now I appear to be permanently connected to the UK ITunes Store. How to get back to the USA store?

    Never mind, after about 20 minutes it switched back by itself.

Maybe you are looking for

  • How do I get my MacBook Pro to recognize my Toshiba external hard drive?

    How do I get my MacBook Pro to recognize my Toshiba external hard drive? I'm working on transferring my music from our home computer to my new laptop and I already got all my music onto the hard drive but now, when I plug it into my MacBook Pro, it d

  • Error while saving or submitting the page

    I have an application with sharepoint2010 and in the code behind visual studio 2012,Innitially evry module was working,but now when i am saving or submitting any page its giving me UNEXPECTED error with a co-relation id. I went through the error log,

  • I have version 10.0 and this week the vertical lines in tables stopped showing up, they appear and then disappear, does not happen in any other browser.

    When I have a table with columns, the vertical lines show up and then disappear. The right side and bottom lines show up and the top and left side lines are very light with no vertical lines showing to separate the columns. This just happened this we

  • Restarting of SQL services

    Hi having a problem to restart my SQL services and its give me this error- FCB::Open failed: Could not open file E:\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER2\MSSQL\DATA\mastlog.ldf for file number 2.  OS error: 5(failed to retrieve text for this e

  • Tranformation

    Hello My Requirement is that I have a source table with columns A1, A2, A3, A4 with values 0 or 1, and the target table has column A. If any rows of source table has columns A1, A2, A3 or A4 with 1, then target table's column A should get populated w