EA6300 Cannot get web server to work

Hi,
I have a Linksys AE6300 router.
I have a webserver set up with IIS to use port 780 for an HTTP site.
It works when I use the internal IP http://192.168.1.150:780
But, not when I use the external one. 
This is a new router so, I never had this working on this particular router before. (but, my old router worked fine - was able to view website using external IP).
I tried using both the Single and Port Range forwarding. (My old router used port range).
Here is my Single Port forwarding setup...
And my Basic Firewall settings
I also re-booted the router. But, still cannot view website. (unavailable).
What more should I be doing? Or what am I doing wrong?

Thank you for the information.
1 - I unchecked 'Filter Anonymous Internet Requests'
2 - I did the following in port range forwarding.
3 - I did a full powercycle 
4 - I tried to access the external IP address using port 780 --  xxxx.xxxx.xxxx.xxxx:780
Still got 'Webpage is not available'
Error code: ERR_CONNECTION_ABORTED
I went to the site http://www.whatsmyip.org/port-scanner/server/
And noticed that port 80 is closed. (as apposed to 'Timeout (Blocked)'
Port 780 is open.
after trying access the webpage (using port 780) ... this is all that was in my linksys log : 
Incoming log
Source IP address | Destination port number
Outgoing log
LAN IP address | Destination URL or IP address | Service or port number
192.168.1.108         66.161.xx.xx                                     www
192.168.1.108        173.255.xx.xx                                    https
192.168.1.108        66.161.xx.xx                                      www
192.168.1.108        54.249.xx.xx                                      https
192.168.1.108        216.219.xx.xx                                    https
192.168.1.108        67.217.xx.xx                                      https
192.168.1.108        216.115.xx.xx                                    https
Security log
LAN IP address | MAC address | Timestamp |                       Authentication result
192.168.1.108     74:2F:68:79:.... 2013-09-30T22:39:19Z    Successful
192.168.1.108     74:2F:68:79:.... 2013-09-30T22:38:42Z    Successful
DHCP client log
LAN IP address | MAC address | Timestamp | Message type
The external IP address I have is not listed at all anywhere.
Any advice would be appreciated.
NOTE: My isp is Road Runner (Through Time Warner). 
Thank you again for your attention.

Similar Messages

  • Cannot get OSX Server to work properly

    I've followed various tutorials online in a bid to set up a home server.
    I thought I'd got everything right until I tried to login to a 'new user account' via the 'other selection' on the login screen of my mac mini.
    I don't know where I've gone wrong. Has anyone had this problem?
    Users can screen share the server or remotely connect to folders but they can't log into the mac mini server or via other devices

    I'm not sure what it is you're trying to do. Can you explain what Server services you're running and what you're trying to do with them?
    For example, I could describe how to access FTP and Wiki services, but that wouldn't help if you aren't running those services.
    I had to revise my initial Server install to properly configure my LAN. The best advice received was from MrHoffman, and that was to get DNS service properly configured on the LAN.
    I had been pointing to DNS servers outside my LAN. The proper way was to first choose a subnet (MrHoffman advised against using the ubiquitous 192.168.x.x and use 172.16.xx or 10.x.x.x instead), then configure forward and reverse lookups manually. (I had to delete those initially configured by Server and reconfigure my own.)
    This link should help: Hoffman Labs. The description for DNS configuration is for an earlier version of Server, but it works with Mountain Lion Server as well.
    Essentially, each client should be configured to point to your Server's LAN IP for DNS service. The Server should be configured to point to itself for DNS service, specifically 127.0.0.1 instead of its LAN IP address. Make sure you run the tests to make sure DNS is configure and working properly.
    If that doesn't help, you'll have to provide more detail on what it is you're trying to do.

  • Cannot get Search Server to work

    I am installing plumtree corporate portal. Everything seems to work except for the Search server. Any ideas?

    Probably will need more information about your ability to search. But...
    1) You will need to ensure the Plumtree Search Service is running2) Items are not indexed until the Search update 1 job runs, this means you will have to STart the job Server. The Search Agent should run immediately upon starting the job server.

  • Help! I cannot get a server to work on my one game!

    On Garry's Mod, and Counter Strike: Source, i cannot make servers. I also am not very good with routers. Can someone please help me?

    Hi,
    First of all you have to assign a static ip address on computer on which you have to host games, like
    ip: 192.168.1.10
    subnet mask:255.255.255.0
    Default gateway:192.168.1.1
    Then need to forward ports used by the mentioned games on your routers firewall, to this static ip address.
    Ports used by Counter Strike:
    1200 set as UDP. 
    27000 - 27015 set as UDP.
    27020 - 27050 set as TCP.
    Ports used by Garry's Mod:
    27015 UDP
    27015 TCP
    27020 UDP

  • I cannot get airport extreme to work. Can you help me?

    I have a G5 Power PC. I recently purchased a macbook and an Airport Extreme. I cannot get the airport to work. Can somebody help me please??
    G5 Power PC and macbook   Mac OS X (10.3.9)   new OS X on Macbook

    I plug the ethernet from the airport to the back of the modem (a Webstar unit) from my cable provider. Then I plug the other cable from the back of the airport into my G5. Then plug in the power cord. I get lots of flashing lights - "thinkin & blinkin", but then I get a message that it cannot locate the server. Even rebooted. I've been waiting for the IT guy to call/email me back me back but no response yet. I'm guessing I may just need a new location, but I'm not wired to think IT-like (I'm a very right brained graphic designer), I I don't want to screw anything up.
    Do I need to just go through a new internet setup?
    G5 Power PC and macbook   Mac OS X (10.3.9)   new OS X on Macbook

  • Cannot get iTunes DJ to work

    No doubt it is something really obvious that I'm missing, but I cannot get iTunes Dj to work. If I click on iTunes DJ in the left column, right section of the window says "iTunes DJ" and explains that I can make a continuous mix, but there is no list of music. The play button is greyed out.
    The help file says "To select a specific playlist (instead of your library) for the live mix, choose an option from the Source pop-up menu at the bottom of the iTunes window."
    but there is no Source pop-up menu at the bottom of the iTunes window.
    Any ideas?

    Do you see the grey bar at the bottom of the screen when you select iTunes DJ, the one with the Settings and Refresh button, as seen in the picture on this web page? If not, then the bottom of the window may just be off the screen on your system so you don't see the Source selector. If that does seem to be the problem, try changing the resolution of your Mac's screen (Displays system preference) to the highest resolution. If it already is, try changing it to a lower resolution, then back. That may get the iTunes window to reappear..
    If not, open the Script Editor application, paste in the following text (up to and including the line that says "end tell") and click the "Run" button:
    tell application "Finder"
    set {d1, d2, d3, d4} to (get bounds of window of desktop)
    end tell
    tell application "iTunes"
    set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
    set bounds of window 1 to margins
    end tell
    If the iTunes window is running off the screen, that should restore it.
    Hope this helps.

  • Can't get Web Sharing to Work

    I can't seem to get Web Sharing to work internally or externally with the AE. ON the G5 with MacOS 10.5.6, I have Web Sharing turned on under Sharing, Security > Firewall allows all incoming, Network configured as DHCP with IP 10.1.4.
    On the AE, under Internet > Internet Connection I have Using DHCP, Connection Sharing = Share a public IP address. Under DHCP I have a DHCP reservation for my G5 10 10.1.4. Under NAT, I have enable default host at 10.1.4. I currently have NAT Port Mapping Protocol on and have Web Sharing configured (though I have tried with it off).
    Under System Preferences > Sharing and Web Sharing selected, when I select my computer's website I get Safari can't connect to server. Same when I try to access a web page hosted here via dyndns.
    So, there must be something I'm doing to cause this but I sure can't figure it out.
    Any ideas?
    Ed

    Solved. Just did created /var/log/apache2 directory and a chmod 755 on the directory.
    Had to keep digging through discussions to find it.

  • Send for shared review - What type of Web server folder works?

    Hello all,
    Can someone please explain to me what type of web server folder works with "Send for shared review"?
    I have created a folder on my GoDaddy server account with full permissions... http://webservername.com/Adobe_Test but after clicking Next, I see the error, "The Shared Folder Location is not valid. Click OK and check the Status field for more information."
    1) It isn't valid? What are the valid server requirements?
    2) "...check the Status field for more information."? What Status field?
    It would have been great if I could use a Google Docs folder but that failed as well.
    What must I do to unlock this neat feature?
    Thank you

    Thanks CtDave.
    I ended up building a WebDAV server and I am now encountering a bunch of new issues. Such as:
    From my workstation, working with Acrobat.
    - After making comments. I click the top button "Publish Comments" - this works well - no errors. But when I attempt to exit the PDF, Acrobat wants to save the document. Attempting to Save results in a read-only error. After trying this, Acrobat gets into a loop where there doesn't appear to be a way to exit Acrobat (other than by Save As new file name):
    Even worse... I understood that reviewers only required the Adobe Reader in order to comment. This doesn't seem to be the case.
    When I emailed a test document for review, this is the message that pops up:
    All that is available is the original content (none of the review comments are available).
    Any ideas?

  • Getting Web Server Path

    I am trying to get web server path (currently it has been hard coded)
    in ASP we have something like,
    Server.Mappath()
    do we have any command in Java to do that?
    Thanks in advance

    thanks.
    but getRealPath() will work only with servlets.
    i have a case where i shud get the path in applets,
    and individual classes.
    i know, we can pass params from Servlet to this individual classes, but
    is there any other way to get the server path directly?

  • Cannot Get Animated Buttons to Work in DPS (InDesign 6.0) Help Please!!

    In DPS tips, using the iPad app, some of the navigational buttons appear like SWF buttons, but, I cannot get SWF buttons to work in DPS. I have been trying with Multi-States, but, cannot get that to work either. Can you tell me how to get a SWF like button to work in DPS - I'm working with ID 6.0.
    Do you have an eaasy answer? Is there a tutorial out there I can view? Is their a step-by-step I can read?
    BTW, I do understand how buttons work and the types of events that work in DPS.
    Thank you
    Lain Kennedy

    Hi Uwe,
    First, let me say "I cannot even believe all the wonderful information I have recieved from my original post," and, I want to thank you for your understanding.
    I have been a designer for many years, working before the computer, and, since the mid 80's working with a variety of software to produce both print and web projects. I must say, I am biased on the Adobe Creative Suite, and, have had amazing success with these tools.
    Nonetheless, I have been working with DPS for about a month now (and a month does not make a career), and, have to admit, I am looking at DSP as a Hybrid between Print and Web. Yet, it is neither print or wed, it is it's own element, and, I'm just having growing pains learning, especially the terminology.
    Yes, I am trying to explain SWF Buttons, when in reality, it is DPS Buttons, and, my thinking is based on print and web. Now, it is - in some ways - like going back to school learning DPS and DSP terminology. It is a bit frustrating, but, I know I will get it.
    Now that I have looked at my first MSO test, I followed the instructions in DPS Tips, I realize that the Button is in the "Normal State" as I (interact, this is my terminology) touch or hover to make the button work. It is in the "Click" state that the Button triggers the MSO to work, and, I finally get that now - okay, I'm slow to learn. And, I will be building a complex MSO to prove the point to myself.
    I was wondering, besides DPS Tips, are there any books, apps, specific sites that are very specific on "ALL" the things one can do with DSP? 
    Again, thank you and, all the folks who have taken their time to respond to my post. All the information is truly appreciated.
    Sincerely,
    Lain Kennedy

  • Cannot Get U460 Webcam To Work!!! Help Please!!!

    I received my U460 a couple of days ago and I cannot get the webcam to work, at the bottom is the error I keep receiving in Youcam, I have gone in Settings and selected Lenovo Easy Camera, and no I don't have any other programs opened using The webcam. I have tried  pushing function + esc, camera is on. Mic works fine. I have tried reinstalling the Web Cam Driver, YouCam Software, then eventually did a System Restore. Then tried it in Skype, MSN Messenger. No Luck. I have wasted so much time on this. Any help would be appreciated.
    Warning
    YouCam cannot connect to your webcam ( Lenovo EasyCamera ). Try selecting another capture device within settings, or close any applications that may be using this webcam and then restart YouCam.

    When i am trying to open ciberlink youcam it shows one warning message like.......
    Warning
    Youcam cannot connect to your webcam(Lenovo Easycamera). Try selecting another capturing device within settings, or close any applications that may be using this webcam and restart youcam.
    Please any one help me to resolve this problem.
    I did this following things but no use.
    ->uninstalled easycam drivers.
    ->restarted my laptop.
    ->os automatically detected the drivers and reinstalled.
    My OS is Win 7 Home premium 64-bit.

  • Cannot get mail server failed

    Message keeps saying Cannot get mail, server failed.

    i had to manually put in the correct email. I wanted to register a hotmail account but since it was giving me that response, I researched this issue. Finally, I found out some specifics and gave it a try. The post said to Go to Add email and Click Other. My email is a live account... I needed to type::
    host name: outlook.com
    SMTP (Outgoing mail server): stmp.live.com
    Server port as 995
    When I put all of that in, it worked. Hope that helps!

  • Cannot get mail, server unavailable error message n my Yahoo account only, but not on others

    Although I have no problem getting hotmail and other yahoo account messages, my PRIMARY email account has been returning an error message "Cannot get mail, server unavailable".  But my server is working just fine for everything else except my main yahoo account.  Could anyone shed some light on this for me?  Thank you all!!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I cannot get any TAGLIBS to work

    I cannot get any taglib to work on my install of TOMCAT 4.0.1. I have even downloaded WAR files that from the jakarta taglibs project for their examples and they fail as well. Can anyone help me? I am receiving the following error:
    org.apache.jasper.JasperException: This absolute uri (http://jakarta.apache.org/taglibs/dbtags) cannot be resolved in either web.xml or the jar files deployed with this application
         at org.apache.jasper.compiler.TagLibraryInfoImpl.(TagLibraryInfoImpl.java:194)
         at org.apache.jasper.compiler.TagLibraryInfoImpl.(TagLibraryInfoImpl.java:174)
         at org.apache.jasper.compiler.JspParseEventListener.processTaglibDirective(JspParseEventListener.java:1159)
         at org.apache.jasper.compiler.JspParseEventListener.handleDirective(JspParseEventListener.java:755)
         at org.apache.jasper.compiler.DelegatingListener.handleDirective(DelegatingListener.java:121)
         at org.apache.jasper.compiler.Parser$Directive.accept(Parser.java:243)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:1133)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:1091)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:1087)
         at org.apache.jasper.compiler.ParserController.parse(ParserController.java:213)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:210)
         at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:546)
         at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:177)
         at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:189)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:382)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:474)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:201)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2344)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:164)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:462)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:163)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1011)
         at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1106)
         at java.lang.Thread.run(Unknown Source)

    to wainstead ( I saw your post at the JTL forum, who knows when the authors will be around)
    I tried using the <taglib-uri> and it works for me(I am using Tomcat 4.0).
    In fact I can use just http://www.man as long as it matchs what I put in the uri attribute of the taglib directive of my JSP.
    But the situation is confusing because according to the Servlet2.3 specification
    "taglib-uri element describes a URI relative to the location of the web.xml document,
    identifing a Tag Library used in the Web Application." Perhaps someone with more experience
    can explain.

  • I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    You can go to the Apple online store and purcahse a copy of Mountain Lion.  This will give you a redemption code, which you can use to download Mountain Lion from the App Store.  Unfortuantely, I'm not aware of any other way to legally purchase it.  I have never seen Apple release Muontain Lion on DVD.
    In terms of Apple Service, they just need the serial number of the machine to check the purcahse date.  It is usually correct, to within a few weeks.  A quick Google search should give you the correct number to dial.
    I hope this helps.

Maybe you are looking for