EA6300 - Cascading the Linksys router to another router (LAN-LAN) - Does not Bridge built in Wifi AP

Regarding:
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3733#
Cascading the Linksys router to another router (LAN-LAN)
The Bridge mode function on the EA6300 does not bridge the Wifi AP radio to the network.
The ethernet ports are bridged, and the router can see network devices and wifi devices connected to itand ping devices in both directions , but Wifi clients connecting to the unit running in bridge mode are not "bridged" to the network.
~
Using the built in webpage of the router, all devices can be pinged.
Ethernet RJ-45 devices plugged into it can ping the unit and pull up the units config webpage, but not ping wifi clients connected to it.
Wfii devices connected to its access point radio, can pull up the units config webpage, but not ping ethernet RJ-45 devices connected to it.
If there is a bridge, then the bridge is broken in half and not functional.
~
All devices are set with IPs on the same subnet, 192.168.2.x
~
I have a Netgear router in Bridge mode, and it works fine, connecting the wifi access point and RJ-45 ethernet clients together like it should be, so I know how Bridge mode... should work...
But it doesn't on this unit, it is not working completely out the factory door. It will bridge one Router to another via the RJ-45 ethernet ports, but its own AP radio is no longer bridged and connected (like when running in NAT
Note that doing cascading using NAT as described under "Cascading the Linksys router to another router (LAN-WAN)" works fine.

Hi,
There's no WLAN bridge feature on the new Linksys Smart Wifi routers. You might also like to check and review these articles about Bridge Mode:
Article ID: 24583 - Setting up your Linksys Wi-Fi or Smart Wi-Fi Router to Bridge Mode
Article ID: 25714 - Setting up your Linksys Smart Wi-Fi Router to Bridge Mode using your Linksys Smart Wi-Fi Account
Hope this helps!
If everyone needs to believe in something, I believe I'll have another beer..

Similar Messages

Kindly Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN ?

Kindly
Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
Thanks,

Linksys/Cisco E4200 are compatible with DHCP. Second, these Wireless-N routers are only capable of enabling the VPN traffic to pass through the device. You will need a VPN router and software to create the actual network to connect with your VPN client.

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

I can only open one Firefox browser window. When I click the firefox icon from desktop or taskbar to open up another browser window it does not open. I am ablt to open up new tabs within the one window.

I can only open one Firefox browser window. When I click the firefox icon from desktop or taskbar to open up another browser window it does not open. I am ablt to open up new tabs within the one window.

Have you tried: click Firefox button > New Tab > New Window '''''OR''''' CTRL+N '''''OR''''' File > New Window (if using the Menu Bar)
Once open, Firefox locks the Profile that is in use and you can not open another window with that Firefox version and Profile combination using the Windows Desktop icon or the Windows Programs list.

TS3274 My iPad has intermittent wifi connection but another ipadin same room does not

My iPad has intermittent wifi connection but another ipadin same room does not

Andreahinchco wrote:
My iPad has intermittent wifi connection but another ipadin same room does not
Which means exactly what? One iPad can connect intermittently and one doesn't connect at all? This makes it sound to me like you are having WiFi issues with both of them. At least that's how I interpret your statement.
Start by rebooting your router. Unplug it for about 30 seconds and then plug it in again.

(ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly. Wifi sync hasn't worked yet.

(ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly. Wifi sync hasn't worked yet.
I mostly use technology for education and professional audiovisuals and lights.
I don't sync music because I use music from at least 4 different computers. (manually mange music)
I use my iPad to play performance tracks for church and a local gospel group out of our church, Won4Christ.
I chose to buy the iPad because the laptop of one of the group members (dellxps running iTunes) was randomly losing and mixing up music and I wanted a more stable option that was bigger than my iPod touch.
I tried to add some data to music libraries that I previously added to my iPad, but the data only shows up when looking at the device in iTunes.
Wifi sync has not worked on either my laptop or desktop ( both running windows 7 enterprise 64 and newest iTunes) not really a big issue, but very annoying
When browsing through library playlist albums on the iPad, random artwork shows up on playlists with no artwork that you touch while dragging, and it does not go away until you change to another navigation tab and back.
Random songs out of hundreds that I added showed up in iTunes grayed out with a sync circle beside them. Those songs would play back okay on the iPad but were unplayable through the iTunes device view. I had to delete the songs manually through the library along with the playlist and add them again.
These seem to be major stability bugs in the "new" music app and iTunes. My only option right now seems to be to delete the songs that I want to change and re-add them with the changes already applied rather than changing the id3 tags and artwork on the existing music. I hope apple will release updates to resolve these issues.
Thank you for actually making it to the end of this manuscript of annoyances.

Just wondered if anyone had any other suggestions.

I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank you

See this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

HT1848 I downloaded a book on itunes on one computer and it is not listed on a seconded computer. Same account. I have tried updating purchases and transferring recent purchases, transferring purchases from another devices. Still does not appear.

I purchased a book on one macbook in my itunes account. I tried to open it on another account while logging into itunes account. The book does not appear.
I have tried updating purchases, the bottom at the bottom-update purchases from another device. Still does not appear.

If it's an audiobook then you will need to copy it over from the first computer to the second computer - audiobooks are currently one-time only downloads, so they won't appear under the Purchased link for re-downloading. If you copied it onto a device from the first computer then you should be able to copy it off that device to the second computer's iTunes via File > Transfer Purchases. If it's not on a device and both computers are on the same wifi network then you should be able to copy it over via home sharing (there are instructions on this page), or you can copy it to, for example, a flash drive (you can find it's location on the first computer by control-clicking it in your iTunes library and selecting 'Show In Finder') and then add it to the second computer's iTunes (File > Add To Library).
If it's an ibook then you should be able to re-download it from the store : re-downloading.

When the screen saver turns off my front panel does not refresh.

when the screen saver turns off my front panel does not refresh. If I use the show desktop button sometimes I can not maximize my vi by just clicking on it from the start bar.

I utilize both a screen saver and the show desktop feature but have never seen this problem in the past. You might play around with your screen saver settings to see if they have any affect. You might also try another computer just to make sure something larger scale isn't going on. Also, testing with other programs to make sure it isn't a general OS issue is always a good idea. Other possibilities include changing your Video Driver settings, updating your video driver, and uninstalling - reinstalling.

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again.

Error 'The application id or shortname (-1) you entered does not exist.'

Hello,
When I run the OA page it opens without any errors,but I delegate to Other page for insert record it showing following Error
, Please help me to resolve this error.
oracle.apps.fnd.framework.OAException: The application id or shortname (-1) you entered does not exist.
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
     at OA.jspService(_OA.java:87)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:392)
     at OA.jspService(_OA.java:80)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Regards,
Kapil

Helllo Friends,
Issue get resolved. On page, there was one field with Item Style 'MessageLOVInput' and I had not given a source for 'External LOV' to that field.
Thanks,
Kapil

EA6300 - Cascading the Linksys router to another router (LAN-LAN) - Does not Bridge built in Wifi AP

Similar Messages

Maybe you are looking for