EA6300 Speed limit of MAX 40Mbps at 2.4GHz
Hi to all,
Yesterday I bought new Linksys EA6300 Router for my home. But I'm a bit disappointed.
My ISP provides me Internet speed up to 85Mbps, but the devices connected at 2.4GHz band can achieve maximum of 40Mbps (download and upload).
I've tried everything, switched ON and OFF WMM, No Acknowledgment, etc. Even updated the WiFi adapter drivers on my two laptops, but still no joy.
No matter what I do, I cannot achieve full speed at 2.4GHz. The 5.0GHz devices at my home have no problems though.
Any suggestions?
Thanks in advance!
Its not recommended to speed test on wireless as there are many factors and variables that can cause inaccurate speed test results on wireless. Wired is preferred and recommended to test with. Also not all wireless devices can't perform the same way and maybe designed differently. 2.4Ghz is best with mode N, WMM enabled, WPA2 only and Auto channel Width for best performance.
Media Prioritization should be disabled to test or if you had it enabled, you need to set up the Advanced/Downlink option under media prioritization for you ISP speed package you pay for, so if you pay for 20Mb down, you need to input 85000 into the downlink box. Save settings and reboot the router.
You may have interferences from other sources as well.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-esse...
Similar Messages
-
A browser with download speed limit?
It sounds weird but on Linux I can't find a browser that allows to set a download speed limit.
I found an extension for Firefox but it works only on Windows.
I know the existence of download managers like d4x, wget, jdownloader, etc... but some downloads can only be done by browser.
I know trickle too but if I want to change the speed limit I have to 'restart' the command (interrupting the current download).
Then I didn't find an extension for Chromium.I was able to implement [global] throttling with wondershaper. You will need to modprobe sch_cbq if you use the CBQ script (not sure about the HTB one). I use the CBQ version.
-
Whats the limit of max no of concurrent sessions in oracle9i database
Hi,
pls let me know whats the limit of max no of concurrent sessions in oracle9i database .
Thanks.Hi,
Oracle no longer offers licensing by the number of concurrent sessions.
There used to be 2 initialization parameters : - LICENSE_MAX_SESSIONS and LICENSE_SESSIONS_WARNING . these have been deprecated.
Therefore Jaffer's statements stands.....
Cheers...rCube. -
Hi!
My turn to ask a question. I read some- and everywhere the Athlon XP has a MHz limit of 2500. It seems to be so, but is it? I tried on my own to find an answer, and below is a result of that, but...
Why I don't ask AMD?! Before asking well-paid and intelligent people, I thought I should try the forum.
Speed limit
Athlon XP and Sempron reached a speed limit
The main difference between the socket A processor nowadays seems to be in the architecture of the cache memories. The speed does not pass 2500 MHz. Why is that?
The first Athlons came in 1999. Their advantages compared to their competitor are/were the number of pipelines and calculation units:
- Three decoders for translating the complex but fundamental CISC-instructions into RISC-instructions. The processor has no problem working with the short and simple RISC-instructions.
- Athlon can have 72 instructions simultaneously, (Pentium III 40, and the earlier K6 only 24).
- Very competent FPU:s, three of them, and as FPU is better at calculating decimal numbers than the main ALU, it makes Athlons good at 3D graphics – where there are lots of that kind of mathematics when producing polygons.
In the beginning Athlons had external Level 2 cache. The cache sat on a slot beside the processor, and the architecture was called slot 1. With XP this changed, both Level 1 and Level 2 cache were built into the processor, and we got the socket A kind. Athlon XP was also built with thinner lines connecting the transistors, and got the ability to handle new instructions, got a better data pre-fetch technology, and an overheating protection.
So what’s the problem? Speed it up!
Well, one bottleneck lies between the processor and the RAM memory, the Front Side Bus (FSB). The processor is much faster than the RAM and process data as they come by. To keep the processor busy mainly Intel invented a sort of pipeline, or ladder. The processor is working on every step.
Data is sent from hardware, like sound data or network data over the PCI-bus, graphics data over the AGP-bus, hard-disk data over the IDE (PCI-/SATA) bus, etc. The data comes in ones and zeroes in little packages, which make up complex instructions. For the processor to be able to efficiently perform the instructions they need to be sized down to simpler instructions, from CISC to RISC. (CISC codes is such a fundamental part of the PC history they must remain.) The sizing down is done in the very beginning of each pipeline. In later steps of the pipeline, the instructions are interpreted further and performed.
Early processors needed one clock-cycle per step in the pipeline, but Athlons can manage 2,5 steps, as can for example Pentium 4. With the pipelines, as said, Athlon XP can do 72 instructions at the same time. Pentium 4 however has longer pipelines – with 20 steps – and can process 126 instructions. But the efficiency of a Pentium 4 is lower, which is why Athlons are quicker at the same MHz. Apple’s (Motorola’s) G4 processor is yet more efficient.
Athlon XP has 10 steps in each pipeline for the “main” ALU processor and 15 for the FPU. The reason why there are not more pipelines is that the processor is not kept busy with the slower RAM, and a lot of clock-cycles would be wasted. What is more, there will be too many erroneous instructions, when the processor has to start over, filling the pipelines with correct instructions.
RAM is slower
This was not the case in the beginning. All ran at the same speed, say 20 MHz: Processor, FSB, RAM-memory, PCI-bus etc. By separating the PCI-bus, which had hardware connected that couldn’t work at higher frequencies, things could start moving.
In 1989 came a Pentium with clock doubling. To compensate for the not ‘doubled RAM, L1 cache was invented. But processors kept getting faster. Next thing to be pushed forward was the FSB, which for socket A boards now is increased to 200 MHz x 2 (DDR). Intel increased it even further, but as the efficiency rate isn’t increasing at the same rats, Intel has backed down from the megahertz spiral, and has followed AMD in other ways of thinking.
So is this the simple basic calculation?
Athlon XP:s can do 2,5 instruction per clock-cycle in 10 steps per pipeline x the number of pipelines. The number of pipelines is limited by the number of instructions sent and their quality, 72 instructions at the same time. Can this be the reason for 2500 MHz limit?Ok, reality check people...
Sharp, nice explanation, but you are wrong.
the x86 instruction set (including those nice MUL, ADD and other instructions) is a CISC instruction set.
The difference? A MUL takes 12 cycles, a DIV 40 or something...
RISC was a new computing architecture. Each instruction is simpler to allow higher execution frequency.
The efficiency of a computer is judge by the work done. W= IPC x Freq
Frequency is the well known number that we can find on our beloved processors. IPC is the instructions per clock. Why is the athlon more efficient than a P4 at the same frequency? higher IPC.
How do the chip manufacturer choose those factors?
Well, the problem is that the instruction set is FIXED. x86 (or i386), the instruction set, has been defined years ago as CISC and to maintain compatibility, you have to keep it. They then included internal decoders to change those instructions to streams of RISC instructions, each simpler. Those are the ones really implemented.
How does that influence the speed of the processor? Each instruction is executed by a unit (integer unit, floating point, MMX...), the more that unit has to do for that imstruction, the more time it takes (and the more transistor). This has 2 problems:
- one is that it will limit the overall speed as the more complex the unit, the less speedy.
- The second is that it ties down the unit. If you do a div in 40+ clocks, your integer unit is tied during this time.
The answer to this problem? Pipelines.
Pipelines are splitting the tasks in simpler tasks and executing each as independant as possible.
Example: laundry. You need washer and dryer. However, some of your clothes cannot go to the dryer.
Now, you have 2 loads. If you have a combined unit that takes 1.5h for wash + dry, it will take 3h total.
If you have a washer (.5h) and a dryer (1h), you load the first load (.5h) then transfer it to the dryer (1h). While the drier works, you load the next washer (0.5h). If you need it to perform also the drier, total time is 2.5h instead of 3h. If you dont need it, it is even faster 1.5h.
This is the way intel followed. Prescott has a 25+ pipeline. The problem comes from branches. If you misspredict your branch, you have to flush the pipe.
All that to say that with its manufacturing and its architecture, AMD could not release a AXP even close to 2.5GHz. Can you overclock a good unit over that limit? Sure. Intel did not release a 4GHz and yet you can overclock some P4 up to 5GHz (with appropriate cooling).
Oh, and the technology used is 90nm or 0.09um. Athlon XP is not even that small, it was still on 130nm.
This is the smallest critical dimention (smallest trace. Usually smallest transistor width). -
Hello all!
I have connected my 2 computers to E1000 with cables and looks like router is setting up some speed limits. Does anybody knows how I can remove speed limit? Did not found any setting in Cisco Connect and Advanced settings
Before: speed ~100Mbps
After: speed ~72Mbps (never goes higher, very strong feeling that it is limited)before - without connecting through router
after - after connecting through router
moment ago I tried both options
directly to my ISP - ~100Mbps
through router - ~ 72 Mbps
three times switched cable between both options and results are same -
Getting European Speed Limit Signs in US
Is anyone else in the US getting a Euro Speed limit sign? Not a big deal I guess.
Hope that you have used the in app feedback form as detailed here: http://conversations.nokia.com/2013/05/28/the-here-team-is-listening-to-you/
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Hi there,
Trying to figure out why my upload speed is so slow using FTP. I'm working on a 10/10 link full duplex and my speed tests are pretty good overall. My question is why my upload speed using FTP with my browser/explorer is around 150Kbps while the same
file on the same host using FileZilla goes aroung 900Kbps ?! While testing, I disable my AV just to be sure.
Did some research and found a buffer/speed limit on ftp command (ftp.exe /?). Could that be the explanation or am I missing something ?
Thank youJust to clarify, some questions please:
Are you on a network?
By "Upload", you mean uploading a file over the internet, not within a LAN or WAN, right?
When you say the same file goes 900 kbps using FileZilla, you mean upload, not download, correct?
Also, what kind of internet connection do you have?
One possibility, based on what you've mentioned, is that the server you're uploading to has a maximum speed per connection. This is fairly common. Apps like FileZilla typically use multiple connections to increase download speeds; I haven't used
one in awhile but it's possible they can do this for uploads as well. So if the server you're uploading to has a speed limit of 150 kbps per connection, you'll never be able to get higher speeds unless you use a multithreaded client (like FileZilla). -
Hello fellows!
I was asked to build a program that calculates the Fine when you exceed the speed limit.
When you exceed 120miles/h the fine is 100$ plus 10$ for every additional mile/h.
I wrote a code,but something is wrong with it. When you drive at the legal speed which is less than 120miles/h it still gives a fine of 100$.
import javax.swing.JOptionPane;
public class radar
public static void main(String args[])
String si,so="";
int s,q,f;
si=JOptionPane.showInputDialog("Enter the speed");
s=Integer.parseInt(si);
q=s-120;
if ( q>0 )
f=100+10*q;
so+="The speeding fine is"+" "+f+"$";
JOptionPane.showMessageDialog(null,so);
if ( q<=0 )
so+="You are in the legal speed.There is no fine to pay";
JOptionPane.showMessageDialog(null,so);
System.exit(0);
}This is the first time i'm using the (if) condition. So please tell me if there is something wrong with it.Melechesh wrote:
When you exceed 120miles/h the fine is 100$ plus 10$ for every additional mile/h.Wow, where do you live? That's a pretty low fine.
>
I wrote a code,but something is wrong with it. When you drive at the legal speed which is less than 120miles/h it still gives a fine of 100$.What do q, f, si, so, s mean? Perhaps you could use more meaningful variable names.
perhaps you forgot to add { } to your if statements, otherwise only the first statement is conditional regardless of your indentation. -
Hi all.
I have 2 PCs connected to the net via my wrt54gs router, one through a cabale and the other one wirelessly. Is there any way to set the speed limit for the wirless or both PCs? Like make it 50/50 all the time.
Thanks.
Regards.If you didn't prioritize any device, the router should already work that way. The wired connection is always going to be faster because it's wired.
The box said windows xp or better... So I installed Linux! -
Ovi Maps 3.04 - Speed limit warner settings
Hi,
Can someone explain how to correctly set the options for the Speed Limit Warner on Ovi Maps 3.04? I'm kind of confused here...
Also, I would like to know how these options differ from the Safety Spot Warner option?
Thanks in advance!Firstly select imperial or metric, then decide what speed over the limit you wish to activate the warning. Mine is set at 2mph up to 50mph and 3mph over 50mph. In drive mode the speed indicator (bottom left) shows green, but when exceeding 32mph in a 30mph area turns red and emits a warning. Subsequently in a 60mph limit, exceeding 63mph produces a warning. The map software detects the road speed limits, and this is an excellent safety feature. In respect of police safety cameras and mobile speeding units the general concensus is that a tolerance of 10% + 2mph is used to counter inaccurate speedometers. Also note that the speed displayed by the map is by GPS (more accurate than a speedometer). Hope this helps!
-
I am using an iMac7.1 with 1GB DDR2 SDRAM of speed 667 MHz on board memory. I would like to know what is my best option to upgrade to 4GB on board memory so that I can run Lion OS. Is there a speed limit of the DRAM use? Please recommend or suggest as soon as possible.
You can install 2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs. The maximum amount of RAM is 6 GBs. Visit DataMem or OWC to get the proper RAM at reasonable prices.
-
Set speed limit to network interface
Hi
I want build a program to set limit speed to my network interface
for example max download speed for wlan connection 10Kb
how must edit network interface for this work
i searched but can't found anything
thanksWhy would you want to do this?
It sounds quite suspicious to me.
Still lost in code, just at a little higher level.
i want save my monthly traffic
That doesn't make much sense. How will limiting the network speed do that?
If you limit the network speed to 20% of what it was then it will just take 5 times longer (more really due to the amount of overhead in data packets) in order to upload or download anything.
If you are on a plan which limits the amount of data via the plans network which can be uploaded and or downloaded during the plans payment time period then perhaps you should monitor the data transceived over the link during that time period.
Then write an app that turns off a NIC and will monitor the NIC so if it is enabled it is turned off again whenever some daily allowance of bandwidth is exceeded. Or perhaps write a service for that. Of course the app or service would need to know the pay
period to monitor, the amount of bandwidth provided for the pay period, constantly store bandwidth used (either sent, received or both) while the NIC is up and be designed to know for each day when to disable the NIC if necessary. And allow the NIC to be re-enabled
or re-enable the NIC when some time occurs following the previous disable of a NIC.
However you don't provide what the requirement would be other than you just want to limit bandwidth via some NIC. Which really means nothing unless multiple PC's are vying for bandwidth and you want on specific PC to be allocated more bandwidth than
any other PC or something.
Group Policy Editor has a setting that can apparently
limit reserveable bandwidth. I don't know if setting that to %95 would only provide applications %5 of the available bandwidth. I've installed GPE on my Win 7 Home Premium PC which it does not come
with and I had to find an installer from an untrusted source in order to do that.
Recently I had a friend using a Verizon WIFI device which provides local WIFI for PC's via Verizons cell service I suppose. Apparently if the PC was left on and nobody was using it then bandwidth was used. I believe in about one 6 hour time period over %15
of the entire pay periods bandwidth allowance was used when his girlfriend let the PC on unattended. So I could see where some type of monitor app would be nice for a situation like that.
When you use few words to describe anything the result is everybody having to guess. And with regard to what you think you want to do it makes the entire thread a guess.
La vida loca -
Daq with PocketPC any speed limit ??
Hi ! HELP NEEDED !!!
i need to sample 12 chanels with 16ksamples/s ....
so its something like ... 200,000 ksamles/s ...
and make some Min/Max calculations ...
i want to use it with the PocketPC and the Daq 6024E .. and ofcourse LabView 7 ...
the speet limit of daq .. is 200,000 ks/s .. so its ok ..
but what PocketPC speed i need ??? (200Mhz, 300Mhz, 400Mhz) ... and if its actually possible to sample this speed on the PocketPC aplication ....
anybody tried ???
any body worked near the limits ???
what amount of memory needed ??? 64 mb enought ??
anybody ?? plz ??? :-)
its too pity to buy and to find that its not working ...
u can answere also to [email protected]200KS/s on the 6024E should work fine on 200Mhz StrongARM and 400Mhz XScale CPUs. 200/300Mhz XScales will probably not be fast enough. You will need to download the 7.0f1 patch for LabVIEW and the PDA module to get this level of performance (and to support multichannel).
Due to various factors from both Windows CE and LabVIEW PDA, using the high-level multichannel acquisition VIs in a default PDA install you should expect to be able to acquire somewhere around 10s of contiguous data at 200KS/s. This can be improved to 50s by various means including a lower-level usage of the DAQ driver code. If you require continuous acquisition, this is achievable but more difficult to program, and may not be able to operate stably at 200KS/s.
If you need more information a
bout said lower-level programming please msg me privately. -
Database Adapters - Limit on max records read/written to a DB table
Hi,
I would like to know if there is a limit to the number of rows/records that a DB Adapter can fetch at one go? We need this information to fine tune the performance.
ThanksMarc,
I think I was not able to convey what I wanted very clearly. What I needed to know is whether there is an upper limit for the number of records that a DB Adapter can read at a time. For ex. does it say anywhere that I can read a max of 1 million(any such number) rows using my db adapter. Put otherwise, if I try to read more than the max allowed records (1 million in my example) from a table my db adapter might throw an error. -
[solved] speed limit for pacman?
Is there a way in the configuration to limit the download speed of pacman?
Been reading the wiki but nothing relevant on that part
Last edited by akurashy (2009-08-19 22:03:29)invictus51: welcome to the boards, please read the Forum Etiquette, particularly around:
* don't necro-bump http://wiki.archlinux.org/index.php/For … Bumping.27
* ...and if you do feel compelled to, at least avoid power posting http://wiki.archlinux.org/index.php/For … mpty_Posts
Closing
Maybe you are looking for
-
I am getting really ******, been working on this for a couple of hours and appletv tells me to turn on the homesharing on the computers i want to share with. Never recognizing them. Apple is on the network thru ethernet, antd the others through wifi.
-
Checking entire array for collision? How? AS 2.0
Hi! I am doing a flash game with Actionscript 2.0 and have encountered a problem. I have this statement _root.bulletArray = [] that is storing all my movieclips that have been created with attachMovieClip. I was able to store all bullets in the array
-
Use .cs & .vb files in teststand
Hi I have lot of code in C# and VB i can use with this code in TestStand ? please send me information and example how i can doit Thank you Ran s
-
Hello! I'm a begginer in SAP and I really need help. I saw a lot of threads about this subject and, apparently, the solution is to use one of the following BAPIs (I'm not sure which one): BAPI_OBJCL_CREATE BAPI_OBJCL_CREATE_KEY BAPI_OBJCL_CHANGE BAPI
-
Firefox was operating normally until I ran a virus scan. I have tried everything I can think of. The computer is connected to the internet because other applications are working and even updated from Microsoft are downloading. I am running XP. Everyt