EA6350 AC1200+ Unable to make connection with Internet

Hi! Just wanted to ask if you could help with this issue I just bought the EA6350 AC1200+ Wifi Router. I tried to set up the router in the same manner, step by step as the instructions tell me to and the Wifi is still telling me that it doesnt detect any internet connection.Whenever i login to the Smart Wifi Menu, the screen tells me that there is a connection between the computer and the router, but no connection with the internet. I have tried to check if its my internet's fault, by just simply connecting the cable to my laptop and the internet works just fine. My internet connection via LAN cable doenst require any login/password. Please let me know if anyone can help! Thank you so much! nting007

@nting007 Reset the router to factory defaults. Press and hold the reset button on the back panel of your router for about 10 seconds then release. Once accomplished, follow the steps on this link.

Similar Messages

Airport doesn't make connection with internet (dsl-modem ST 780 WL)

Hi,
I 've connected two airports (extreme) with ethernetcables at a dsl-modem (older model Speedtouch). The connection with internet is okay.
But: when I connect the same airports (on the same way: with cables) at a Speedtouch 780 WL, they have no connection with internet. Everything seems to be allright, in the airport assistent I see IP-adresses and so on.
What 's wrong..?

It's more likely a software problem that something wrong with the PowerBook, so posting an additional question in the Leo forums' "Getting Online and Networking" sub-section is a good idea. Leave this one here in case it sounds familiar to other PB owners.

Do I have to disable DHCP in router and configure DHCP role in essential server to make connection with internet

hi,
'do I have to enable DHCP role on essential server just like sbs server to configure internet and domain name , or that is not really necessary , the router dhcp is enough toconfigure essential server!
thanks
johan
h.david

The router DHCP is enough to use Essentials server. Essentials is designed to work with router dhcp out of the box, but you can choose to install DHCP role on server if you like. If you decide to do that, check the blog post from
here: http://blogs.technet.com/b/sbs/archive/2013/04/22/running-dhcp-server-on-windows-server-2012-essentials.aspx
Also check the Essentials documentation for more details from here:
http://technet.microsoft.com/en-us/library/cc514417.aspx

Can't make connection with internet

Help, I can't order book or anything anymore with Iphoto which I just bought. I had ordered a book a week ago and that worked. But now it says: 'Please ensure your network connection is active and try again'. I've already tried deleting the preferences. But still And I've checked my connection over and over again!! Pleas help... I've got a deadline for this book! grtz, C

McAfee Security Center it has a firewall and if you have active Windows Firewall maybe you have a conflict. If you have active McAfee you can disable Windows Firewall in security center ''' or''' if you don't have supported McAfee disable it, and keep Windows Firewall & install a free trusted antivirus.
from microsoft win 7 forum:
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/can-we-use-more-than-one-firewall-on-win-7/31a45fd3-7d69-e011-8dfc-68b599b31bf5?msgId=8fe9a9b7-436a-e011-8dfc-68b599b31bf5
see also:
[http://www.techtalkz.com/windows-7/515977-how-configure-windows-firewall-windows-7-a.html How to Configure Windows Firewall in Windows 7]
[http://service.mcafee.com/FAQDocument.aspx?id=TS100887 How to configure McAfee Personal Firewall to allow inbound connections on specific ports]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Unable To Make Connection With FreeTalk Website

I have tried to reactivate my Freetalk unit (wall plugin). There used to be an area on the freetalk site that would reset the device and always worked when I had a problem. Now I don't see that option.
I've tried doing a reset on the unit and all I'm getting is a solid red light. I'm hoping I can get the website up and try a reset from there to start.
I've had over a year of steady service, but, I'll go with another option for VOIP if this is an indication or MS's takeover.
Thanks in advance for any help with this or an update if they are down.

The only reset page I'm aware of would be the reset page available locally. Generally that would be something along the lines of this address:
http://192.168.1.X/administration/popup-factory-reset.php
This address link is found on the system settings page.
What I have found is the device tends to grab an IP then go offline and reset itself. In my mind, that is indicative of at least one of two things:
1. The device does a pre-boot (bootloader/POST) and fails to load a valid image due to corruption in memory (ROM/RAM/NVRAM).
2. During POST one of the pieces of hardware is failing. A defective part or a cracked trace due to overheating/device shock.
The factory reset procedure available externally on the device should be near equivalent to the factory reset webpage link. My biggest complaint with the device is no procedure openly exists to the general public that addresses condition 1.
As far as something getting certified. It usually means that it met the minimum requirements and passed a barrage of tests thrown at it by the certifier. If a device passes a series of tests and works flawlessly how is anyone to know how long the device will hold up in the real world for 1 month, 1 year or 10 years in varying environments?
In the dinosaur age of computers, things seemed to last forever. Nowadays with the increased speed of devices, mass production, lead-less solder (for our "safety"), accuracy and failure rates seem to go up. The sad thing is having a warranty on a device is a guarantee by the manufacturer that is will last at least that long. If it doesn't, it gets replaced under warranty. If it lasts longer, you're on borrowed time. There is an expected lifetime for everything but consider it like a car warranty (Ex. 10 year/100,000 miles). In the computer world you're more than likely going to hit the year mark before you get the mileage out of it.
If I run across what I deem a lemon, I'm more than likely to chose another product or just continue to look elsewhere.

VideoError: 1000: Unable to make connection to server

VideoError: 1000: Unable to make connection to server or to
find FLV on server
I've spent a lot of time in the past couple of weeks trying
to figure out what could be the problem.
I developed a Live Streaming Flash (swf) that play fine in my
local host with my Labtop with FMS3 Installed.I can see my live
video in internet only when i use my laptop. What puzzled me is
that even when i connected to Internet my Live stream and the
dynamic playlist work perfect on my laptop but never in any other
computer. I have tested it on several computers in different
places, the only thing i get always is this code;
VideoError: 1000: Unable to make connection to server or to
find FLV on server
at fl.video::VideoPlayer/play()
at fl.video::FLVPlayback/
http://www.adobe.com/2007/flash/flvplayback/internal::showFirstStream()
at fl.video::FLVPlayback/
http://www.adobe.com/2007/flash/flvplayback/internal::handleVideoEvent()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunctio
n()
at flash.events::EventDispatcher/dispatchEvent()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::setState()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::httpNetStatus()
Does anybody know what can cause this error and how to fix
it?
Thanks in advance,
Delluchi

I can't answer your question but it sounds like you have a similar problem to me, I can make the connection fine from my laptop but no other pc can connect or see the stream. Why can't someone just tell you in plain english how to .... better still why can't Adobe actually tell you in plain english! Hope you work it out, if you do let me know please!

MapiExceptionMdbOffline: Unable to make connection to the server. (hr=0x80004005, ec=1142)

Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server      : CLI-SRV01
Database    : CLI-MDB01
Mailbox     : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive   :
Result      : *FAILURE*
Latency     : 00:00:00
Error       : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
              Organization/ou=Exchange Administrative Group
              (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
              [Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
              server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/Patrice

Hi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks，
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

After having downloaded my e-book ADE gives the information that there is not a connection with internet. What is the problem? Liejaat.

After having downloaded my e-book, Adobe Digital Edition gives me the information that there is no connection with internet.Who can help me with this problem? Liejaa.Adobe Digital Editions

I've never seen this error in the context of trying to connect via ODP.NET or ODT.
If you have Oracle Dev Tools for Visual Studio installed, you can try to create a connection to the database using Server Explorer. If this works, that means your ODP.NET connection is just fine.
If you don't have VS or the tools, another thing you can try is connecting through ODP.NET using a simple OracleConnection.Open. Make sure you have your client set up to connect to the DB server.
Here's some info about connecting to the DB:
http://download.oracle.com/docs/html/B28089_01/featConnecting.htm#sthref101

1000: unable to make connection to server or to find FLV

Hi,
this is driving me crazy. This is so simple, I can't believe
there is a problem. I placed and FLVPlayback component in my flash
file, and named it "my_playback".
I created an actions layer and in it I do:
my_playback.contentPath("moviename.flv") ;
and the stupid flash gives me the error when I run it :
1000:unable to make connection to server or to find FLV.
Now the damn "moviename.flv" is in he same directory as the
flash file, so what is going on?
I just can't believe that the simplest things are are so hard
with Flash, I am getting so annoyed by it, I am almost ready to
give up on Flash.
Does someone have an idea of what is going on?
thanks
-Malena

no idea..
what version of flash?
what is in the contentPath parameter for that component
instance?
I cant reproduce your problem, can I have your fla
file?

NT Adapter unable to make connection

Hi,
I am trying to create a java application using the
Data Form component. I keep getting the error message
TN adapter unable to make connection when I use the data form
wizard. Can I use JDeveloper 2.0 Beta with Oracle 8.0.4?
TIA,
Phil
null

Hi,
I still can't get a JDeveloper 2.0 Beta to access a local
database.
Here is my configuration:
Oracle 8.0.5 Enterprise Edition for Windows NT 4.0 (SP3)
JDeveloper 2.0 Beta (Build 184)
Oracle Developer 2.1 and Oracle Designer 2.1.1 (installed
in the same Oracle home directory as the RDBMS)
All of the above are installed on a STAND ALONE machine with
NO network card installed. I am NOT connected to a network
either.
I have tried using the Oracle Thin driver, the OCI-8 driver, and
the Sun JDBC driver and still unable to make a connection to
the local RDBMS 8.0.5. I have tried every combination in the
Data Form Wizard. I even tried to access the RDBMS with the
Microsoft Loopback adapter. Does JDeveloper use SQL*Net or Net8?
Thanks in advance for your help.
Phil
JDeveloper Team (guest) wrote:
: Hi Phil,
: I posted some DB connect info a few weeks back, but it looks
: like it's faded off of the list. Here it is again (basically,
: to connect to an 8.0.4 DB, you need to use the 8.0.5 drivers):
: There have been quite a few postings on problems with
connections
: using JDBC in the JDeveloper 2.0 Beta release. This may help
: answer some of the common questions that arise. Please note
that
: the connection issues listed here are specific to the Beta
: release of JDeveloper. The production release of JDeveloper
will
: include Oracle 815 JDBC drivers, which should fix some of the
: limitations listed below.
: If this message does not help you fix your connection problem,
: please be sure to provide the following information in your
: posting to help us troubleshoot your problem:
: * version of the database you are trying to connect to
: * platform the database is installed on
: * is the database local or remote
: * what driver(s) you have tried connecting with
: The JDBC 8.1.4 THIN driver is provided as the default driver
with
: JDeveloper 2.0Beta. This driver can connect to 8.1.4 and
: 8.0.5 databases.
: If you are connecting to an 8.1.4 database and want to use the
: thin driver, you should be OK.
: If you are connecting to an 8.1.4 database and want to use the
: OCI driver, see
: the instructions below for switching your driver version. No
: 8.1.4 OCI
: drivers were available at the time of our Beta release. If you
: want to use
: OCI, you need to use the 8.0.5 drivers.
: If you are connecting to an 8.0.5 database and want to use the
: thin driver, you should be OK.
: If you are connecting to an 8.0.5 database and want to use the
: OCI driver, see the instructions below for switching driver
: versions.
: If you are connecting to an 8.0.5 database on Linux, there is a
: bug which does not currently allow this connection.
: If you are connecting to an 8.0.4 or earlier database (back to
: 7.2) and want to use the JDBC thin or OCI drivers, see the
: instructions below for switching driver versions.
: If you are connecting to a Personal Oracle database, use the
OCI
: bequeath method to connect.
: If you are connecting to an Oracle Lite 3.5 database, you will
: need to upgrade the drivers that came with JDeveloper 2.0
Beta.
: See the instructions below.
: Instructions for Switching Driver Versions (regular Oracle):
: 1. Exit from JDeveloper.
: 2. Open the jdeveloper.ini file in a text editor. This file is
: located in the JDeveloper bin directory.
: 3. Edit the IDE Classpath so one of the following appears
before
: ..\aurora\classes111.zip:
: ..\jdbc\lib\oci8\classes111.zip (to use the 8.0.5 thin or
OCI8
: driver)
: ..\jdbc\lib\oci7\classes111.zip (to use the OCI7 driver)
: 4. Save and close the jdeveloper.ini file.
: 5. Restart JDeveloper
: Optional steps to use the right driver at runtime within the
IDE
: - must be performed for each project that you will use the
: non-814 JDBC driver with:
: 1. Select Project Properties from the Project menu for the
: project you are working on.
: 2. Make sure the library for the non-814 JDBC driver you want
to
: use appears in the
: libraries list (if not, click Add to add it).
: 3. Select the non-814 JDBC driver you want to use and drag it
to
: the top of the list. It must appear BEFORE BOTH of the
following
: libraries:
: a. Oracle 814 JDBC
: b. Enterprise Java Beans (this library also pulls in the 814
: JDBC driver)
: Notes on using the 8.0.5 drivers:
: 1. If you are using the 8.0.5 thin driver to connect to a local
: database, type the name of your host, or the IP address. Do
not
: use 'localhost' for the host name.
: Instructions for upgrading to Oracle Lite 3.5 drivers:
: 1.Install Oracle Lite 3.5
: 2.Find the following files in <ORACLE_HOME>:
: olad2035.dll
: olite35.msb
: oljac35.dll
: oljdbc35.dll
: olobj35.dll
: olod2035.dll
: olodmg35.dll
: olrep835.dll
: olsql35.dll
: (these files will be refered as olite35-dlls from now on)
: 3.Copy olite35-dlls into <JDeveloper_Home>\bin
: 4.Create directory <JDeveloper_Home>\jdbc\lib\olite35
: 5.Copy <ORACLE_HOME>\Lite\Classes\olite35.jar into
: <JDeveloper_Home>\jdbc\lib\olite35
: 6.Open <JDeveloper_Home>\bin\JDeveloper.ini, replace
: "olite30\olite.jar" with "olite35\olite35.jar" in the
: IDE_CLASSPATH.
: 7.Launch JDeveloper 2.0
: 8.Create a Oracle Lite 3.5 Library:
: a. Select Tools | Default Project Properties from the menu.
: b. Click the Libraries button.
: c. Click the New button to create a new library.
: d. Name: Oracle Lite 3.5 JDBC
: e. Classpath:<JDeveloper_Home>\jdbc\lib\olite35\Olite35.jar
: f. Click OKto create the library
: 9.Select the Oracle Lite 3.0 JDBC library in the Library list
: and
: click the Remove button.
: 10. Click Add and select your newly created Oracle Lite 3.5
JDBC
: library from the list. Click OK to add it.
: If you already have a project defined and opened in the IDE,
: select Project Properties from the Project menu, and make sure
: your new Oracle Lite 3.5 library is listed in the libraries
: list.
: If not, use steps 9 and 10 above to add it to your project.
: phil (guest) wrote:
: : Hi,
: : I am trying to create a java application using the
: : Data Form component. I keep getting the error message
: : TN adapter unable to make connection when I use the data form
: : wizard. Can I use JDeveloper 2.0 Beta with Oracle 8.0.4?
: : TIA,
: : Phil
null

Unable to make purchases with my new Mac in iTunes Store.

I am unable to make purchases with my new Mac in iTunes Store.
I can buy with my iPhone or my company lap-top (Windows) without any problems. Only with my brand new MacBook Pro it is impossible.
When I try to authorize my Mac, sure dialog window appears and I give my ID and password. Then I get error message: "There was an error storing your authorization information on this computer. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." The same message I get, when I try to deauthorize.
If I try to buy anything (pushing button "Buy"), then I get following error message:
"iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads".
But I have such a permission!!! I can see it!!!
I have even made so, that "everyone" and "staff" also have permission "read and write" in folder iTunes and all subfolders.! :))
When I ask for "available downloads" immediately I get the same answer: " iTunes couldn`t download your purchase. You don`t have write access for your iTunes Media folder or a folder within it. Change permissions (in the Finder) and then choose Store--Check for available downloads"
I have done:
1. I have used the Terminal to correct the permissions (in Finder it looked correct anyway).                    -          NO Result.
2. With Disk Utility I have verified and repaired Disk permissions. (There were approx. 10-12 incorrect values and 3 of them concerned iTunes and other - Jawa ).           -           NO Result.
3. I have moved all iTunes files in Thrash and installed iTunes again (previously downloaded from App Store ).                    -          No Result.
4. I have verified Disk permissions with Disk Utility again. There was nothing wrong, but in spite of this I have pushed the button "Repair Disc Permissions".          -          NO Result.
5. New installation of iTunes again.           -          No Result.
Can it be, that the reason of a problem are not correct transferred data from my old MacBook?

with my new Mac
You have a warranty. Take advantage of it! Call tech support or call the iTunes store.

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 56945
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 59505   StoreEc: 0x3F2
    Lid: 52465   StoreEc: 0x3F2
    Lid: 60065
    Lid: 33777   StoreEc: 0x3F2
    Lid: 59805
    Lid: 52209   StoreEc: 0x3F2
    Lid: 19778
    Lid: 27970   StoreEc: 0x3F2
    Lid: 17730
    Lid: 25922   StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

How can I find the number of megabytes per seconde of mij connection with internet

In a tuning program is asked the number of MB per second of mij lan-connection with internet.
I should like to know how I can find that number.

Hey Tongo,
This isn't really a Firefox question. I would suggest doing a quick Google search for "Internet Speed Test" or something of that nature. I know a very popular one is located here: http://www.speakeasy.net/speedtest/
Hopefully this helps!

I am unable to make MIGO with the Purchase order

Hi Guys,
I am unable to Make MIGO with purchase order .I am getting the below error message.
The posting only in periods 2009/09 and 2009/08in company code .
I have checked with OB52 and MMRV .Kindly let me know wht need to be done .
Regards
Aravind

Dear,
Use transaction MMPV and enter following,
From Ccode     XXXX (your company code)
To Ccode         XXXX (your company code)
Period              09
Fiscal Year     2009
select Close period only and execute.
It will be done.
Regards,
Chintan Joshi.

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

EA6350 AC1200+ Unable to make connection with Internet

Similar Messages

Maybe you are looking for