EA6400 firmware update does not update

Just got my new EA6400 router and after installation I saw there is a firmware update.
current firmware 1.1.40 (build 153731)
new firmware 1.1.40 (build 160989)
After updating the firmware what seems to be successful, no errors and a message box at the end that the firmware update was successful, the firmware still is on the old version!
I tried a number of things to make sure I did nothing wrong:
- reset modem
- manual firmware update
- factory reset
- tried with differen browsers (chrome, IE) and from different machines and operating systems wired and wireless

Take a look at the change log on the support site and see if there is anything worth while in the new version. If not then I wouldn't even try to update. Usually there isn't much if any change to a build number difference on the same release number. And I would advise you to uncheck the autoupdates if they're are checked. Bettrr to do it manually where you can control what and when on your own.

Similar Messages

  • WRT54G v8 firmware that does not block ports?

    Hello everyone! Is there a 3rd party firmware for the WRT54G v8 router that does not block ports or has the option to disable port blocking? I would like all ports to be open on all devices in my network. Thank you!

    This setting is not recommended because it opens your entire network to attack.  Instead, you should selectively open only the ports you need to play your Internet games.
    People who open all their ports often get their computers infected with viruses which send out spam.  When your ISP sees you sending spam, they will turn off your email, IM, or even disconnect you.

  • Creative Zen Sleek Photo Firmware Download does not recognize my pla

    My Creative Zen Sleek Photo recently froze up. After restarting it, the "firmware problem" screen popped up. After reading up on it a bit, I decided to first clean, then reformat, and then reload the firmware. Everything went smoothly until I went to load the firmware back onto my Zen.
    For whatever reason a screen pops up that says that my device is not connected to the computer, when it, in fact, is. I have tried several things including uninstalling Windows Media Player and repeatedly cleaning and reformatting in hopes that it would recognize it.
    I have had no prior problems with the computer recognizing the device and I have loaded quite a bit of music onto it through this computer. Can anyone please help? Any more ideas? Anything will be helpful and appreciated. Thanks?

    HelloHave a look at this thread http://www.anythingbutipod.com/forum...ead.php?t=6328?I had a similar problem with a Zen Sleek Photo and I am sure that this was the thread I used to recover the player when a firmware upgrade failed. Regards?

  • No longer able to access Web Management after Firmware Update [SF200]

    Hello!
    Today I was attempting to set up SNMP on our SF200-48 switch. I realized we were running old firmware which does not support SNMP and that the most current version (1.4.0.88) does support it. I attempted to upgrade the firmware but it failed, so I decided to install the 1.1.2.0 firmware because I read that the firmware flash process has changed before 1.4
    Unfortunately, after rebooting I was no longer able to access web management on the switch. Unfortunately SF200 switches do not support CLI.
    The switch is functional and responds to ping, but I cannot get into management to do anything, is there any steps we can try or will I need to reset the switch? After resetting the switch, will I lose any configuration but still not be able to access management? We do not have any other switches to drop in place of this one, and I'd like to minimize downtime as much as possible.
    thanks,
    Graham Rounds

    Hi Graham,
    if you are sure that the ping response is coming from the switch then I guess the only thing you could try is the factory reset but you will loose all the configuration. You might call also Small Business Team and open a ticket so they will proceed with RMA if necessary: 
    http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
    Regards,
    Aleksandra

  • N97 camera does not work when i open the len cover

    I think the camera softeware has bug. Tthe camera software shows up when all the menu, and when i click i can see the zoom in/out slider but nothing there is no image showing up on the screen. The screen is dark and it looks like the camera sensor does not receive any image from outside. This can be fixed by restarting the phone but it's very annoying. I had to reset like 10 times a day. If i leave the software on it's fine but if i turn off the software (close the lens cover) and turn back on the bug occurs. Anyone has the same issue like me? Do i need to update the firmware? Im on the original firmware.

    it does not happen all the time to me, but sometimes if I open and close it to often, it would happen.
    but I don't need to reset the phone, just close and open the len cover again, and it works. 
    Message Edited by walkmancat on 05-Jul-2009 05:52 PM

  • HP laserjet p1102w does not work with Mac computer version 10.8

    since i upgraded my Mac to 10.8 operating system, I am not able to use the ePrint function from my HP Laserjet P1102W printer. I was told that the current version of the firmware 20130213 does not support this function. Does anyone know when the new version of the firmware will be available to support this function? thanks much.
    This question was solved.
    View Solution.

    Manual, Please let me know the outcome.

  • Ap 3700 PoE with PSE that does not support CDP/LLDP power Negotiation

    We run into a problem when AP 3700 is connected to an 802.3at PSE
    that only supports physical event classification as compliant to 802.3at standard for PSE,
    but does not support CDP/LLDP power negotiation.
    AP 3700 (I believe the firmware version does not matter much) cannot get enough power after not receiving any CDP/LLDP power negotiation packet. (get no more than 15W power although PSE supports 30W.)

    Hi Leo,
    Thanks for the information, and do you know if Phihong power injector supports 802.3at LLDP power negotiation or not?
    And is there any special configuration on AP3700 side like disabling CDP/LLDP power negotiation to make it to work with such power injector,  and what is the command if there is any?
    Thanks again, Leo.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • "The updater does not have a firmware image"

    My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

    Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

  • Ive been trying to update my macbook pro 8,2 firmware from the apple website but first the smc update gives me an error saying that my software does not support that update and belive me i checked and iam downloading the correct one

    so basically i was wanting to update my smc firmware and the EFI Boot ROM version but for the EFI Boot Rom when i click on it says page no found and for the smc firmware, when i do download it says that the my software does not support it, even though it is completely compatible, i checked the system requirements given by the page.
    iam trying to do this because i have issues with the chargin, it keeps giving me a "not charging" messege.
    Help please...

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

  • Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

    pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

    Dear Valued Pioneer Customer:
    We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device.  If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
    This firmware update may be used only with the following 2012 Pioneer products:
    CD Receivers
    DVD Receivers
    DEH-P8400BH
    DEH-P9400BH
    DEH-80PRS
    AVH-P2400BT
    AVH-P3400BH
    AVH-P4400BH
    AVH-P8400BH
    In order to perform this update, the following items are needed:
    A Pioneer CD or DVD Receiver above with built-in Bluetooth
    Laptop with built-in Bluetooth running Windows® 7
    Bluetooth firmware update (HW05-SW01.27.20)
    How to Obtain the Free Firmware Update
    1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
    2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
    You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
    How to Determine if the Firware Update has Already been Installed
    CD Receivers:
    • With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
    DVD Receivers:
    • With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
    If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
    Questions
    If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
    Sincerely,
    Pioneer Electronics (USA) Inc.

  • Intel SSD Firmware Update Tool ISO does not boot

    Hello everyone
    Yesterday I tried to install Mavericks on my MacBook Pro 13" 8,1 but I got stuck because I have an Intel SSD inside and it seems that MacOSX 10.8 doesn't have the right driver on board. So I downloaded the Intel SSD Firmware Update Tool 2.0.6 ISO, burned it on a CD with DiscUtility and tried to boot from it.
    The problem is that it doesn't boot from the CD. It just ends with the blinking/flashing question mark folder.
    Luckily I have a second MacBook Pro 13" 8,1 from work. Just out of couriosity I inserted the disk inside this MacBook and tried to boot from it.
    Everything went fine. I saw the Intel Firmware Updater etc.
    So now my question: What is going on with my first mac? Why does it NOT boot the CD?
    What I need to say at this point: I burned the CD with the MacBook from work. Could this be the reason?
    hope someone can help me
    Best Regards
    krebbl

    yes that's right. Unfortunatly I don't have a Windows PC.
    But like I said, my second MacBook Pro boots from this CD and shows me the firmware updater. My first MacBook with the Intel SSD does not.
    And like in the post here http://reviews.cnet.com/8301-13727_7-57575091-263/intel-x25-ssd-incompatible-wit h-os-x-10.8.3/ it should be no problem.
    Are there other ways to boot an ISO file?

  • HT201210 my i phone will not update because the firmware file is not compatible what does that mean?

    I am trying to run an update on my iphone and I received an error saying the firmware file is not compatible. What does that mean?

    Navigate to this folder and delete any and all .ipsw files you find. You will have to turn on "show all hidden files & folders" to see them:
    OSX:
    ~/Library/iTunes/iPhone Software Updates
    XP:
    C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
    Vista & 7:
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
    Turn off or disable ALL security software & any firewalls. Make sure you're using a high powered USB port directly on your computer...no hubs, if a desktop use a port on the back of your computer. Disconnect ALL other USB devices.
    Try again.

  • HT2128 I need to open a firmware update to my rinter and Photoshop 'does not recognize this firle' is what I get. what can I do?  J. dunn

    I need to download some firware  update from the internet.  Photoshop says it does not recognize this file and will not open it.  what should I do??? thanks, Judi

    I downloaded a Lexmark firmware update file for a color laser printer, just to see what it contained.
    It downloaded as a .zip file.
    I double-clicked the .zip file to un-zip it. (Sorry, I'm not sure which program actually did the unzipping.)
    Once unzipped, it contained several files for multiple operating systems, including Windows and OS X.
    Double-clicking on the PrinterFileLoader.dmg should start the installation on your Mac.
    Opening the README Updating firmware.pdf file and selecting the Mac section revealed:
    *There were additional images on this page that I couldn't capture with a screenshot.
    Your firmware update README file should contain similar information.
    Message was edited by: kostby

  • I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

    I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

    I'd say your sister messed up and your iPod is toasted.
    Think about it...  She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer... 
    Also take into consideration how old is your sister, and how much does she know about electronics?

Maybe you are looking for