EA6500 getting 10mbs, cable router is getting 60mbs how to fix?

Ok, I have tried everthing i can thing of.
switched cables, all cat5E
tested modem on different computer wired getting 55-60mbs
speed test on router is only 10mbs as is on computers when connected to router.
reset rounter many many times.
updated frrmware.
tested with and with out media Prio.
bought another router, same results.
At a loss. Help

I recommend:
If IPv6 isn't required by your ISP; Connectivity => Internet Settings => IPv6 => Edit => Uncheck Enable
Media Prioritization => Enable => Check
Media Prioritization => Settings and apply accurate Downstream and if available Upstream values; Initially keep all devices and Apps normal prioritiy
Enable WMM Support
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

Migration assistant ALWAYS gets stuck, how to fix?

I have been having perpetual troubles with the migration assistant. It always gets stuck on the final stage of transferring. This has happened with my previous transfer attempts and now is happening again as I try to transfer from 17 inch 2.3 ghz MBP to a 17 inch 2.4 ghz mbp.
When I first tried to transfer everything over, it got stuck on "transferring network and other settings". The progress bar looks about 99% done. But it sits there FOR-E-VER and NEVER finishes. So I erased and reinstalled os x fresh on the destination computer, and tried all over again without selecting network settings to transfer. Now it has been having less than 1 minute remaining "transferring files to support applications" for over an hour now.
The same thing happened last time I migrated from a powerbook G4 to a mbp 17 inch. What is going on?????
The migration assistant seems to be a piece of junk.

The Migration Assistant is known (by users of this board) to be problematic between PowerPC and Intel. If you succeeded the first time, it may be the problems the second go around even though they are between Intel Macs, is from any Rosetta applications and plugins installed on your older Intel Mac.
Here's the user tip Kappy and I wrote about migrating between platforms:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1872713

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

HT1498 Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

Issues are usually network related
What is your internet speed? www.speedtest.net
6mbps is required for instant HD (you can switch to SD in the settings)
If on wifi try ethernet and www.istumbler.net to rule out interference
Make sure you're using your ISP's DNS

Recommend Wireless Cable ROUTER Recommendations

Can anyone recommend a good wireless Cable router for use in California?
I've given up trying to get a new LINKSYS Wireless-G WRT544 (and new LINKSYS Cable Modem BEFCMU10) to work here.
The specific problem: My 20MB-100MB .mov Quicktime movies consistantly stall while viewing them on the internet.
I have very tediously ruled out all cables, browsers, workstations.
The problem duplicates: Mac>LinksysModem (no router).
The problem clears using Mac>BestModem (no router).
The problem returns Mac>BestModem>LinksysRouter (reset to default with new firmware).
I have given up on the Linksys brand.
My Asante wireless router used to work right, but I think it has began failing and I am trying to replace it.
Comments appreciated...

Interesting recommendation...
I typoed my original post.
The Linksys router I returned today was a WRT54G v5 with new firmware: 1.00.2
(I was not bold enough to add on "Alchemy Firmware" but thanks for the tip).
UPDATE:
I returned the Linksys Router and Linksys cabel modem.
I hooked up a new Motorola cable modem SURFboard® model SB5120 and instantly got my movie speed back (same as with my old BestData CMX110).
I have deduced that:
1) The Linksys modem was the problem (since I had the problem plugged directly into it), and
2) The Linksys router was the problem (since the problem returned when I plugged the router into a properly-functioning BestData modem).
Again, I should add I did all the hardware, software resetting to default, including turning everything off and back on in proper sequence.
I am currently running off my old Asante router, looking into the new routers (Apple router seems pretty expensive at $200).
The http://www.jerrykindall.com/2005/06/23the_routerking.asp was especially useful (the D-Link DGL-4300 GamerLounge sound impressive, but at $300 may more than I need).

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

I keep getting the message "no volume available" when I hook my iPad up to my TV to watch netflix, does anyone know how to fix this?

I am trying to hook my iPad up to my TV so I can watch netflix on it, however, when i hook the AV cable up i get a message that says "no volume available." my iPad is not muted, does anyone know how to fix this problem?

Read this link and it may provide some help: https://discussions.apple.com/message/15460209#15460209

My iphone 5c get an unknown error(1).how to fix it?

my iphone 5c get an unknown error(1).how to fix it?

See this support document regarding update errors, Get help with iOS update and restore errors - Apple Support however, generally an error 1 is a hardware error, and you may have to make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple Service provider.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

TS1702 I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?

I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?

I am not familiar with Citrix Reciever but is it possible it is open or being used in another open app?
Try quitting all apps then try again.
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer. Does anyone have any advice on how to fix this issue?

After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?

Welcome to the Apple Community.
Which OS are you using.

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

When I try to download the latest version of iTunes on my iPod Classic I get the message that "iTunes has an invalid signature" and that "Content was blocked because it was not signed by a valid security certificate. Anyone know how to fix this?

When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature. The download has been removed." I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc." This problem has never occurred with earlier versions of ITunes. Anyone know how to fix this problem?

Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
Let us know what happens.

EA6500 getting 10mbs, cable router is getting 60mbs how to fix?

Similar Messages

Maybe you are looking for