EA6500 Issue With Running HTTP Server

I use Windows Home Server 2011 to host media and all sorts of things. One of the features is remote access over the web to files through a Dynamic DNS Service Homeserver.com. Currently whenever I try to connect even though my ports are forwarded properly, I get forwarded to the login page of the router to change router settings. Is there a setting I need to change that I'm missing? I've waiting over an hour for live chat and never got connected.

Wanted to check where your NAT is. IF the ISP modems is bridged fully then single NAT should be on the router. Having double NAT can cause problems. 
I presume the configuration of the ports maybe the issue on the router. How are the ports configured? Try using Port Triggering instead of PF. Disable uPnP if your using PF. 

Similar Messages

  • Problems with running HTTP-Server (opmn) on RHEL4 x86_64

    I have installed Oracle 10g DB R2 on RHEL4 x86_64 and HTTP-Server from Companion CD
    After running opmn appears problems:
    1. The system message: "ip_conntrack: table full, dropping packet"
    2. I have thousands established TCP-session on 127.0.0.1 to port 6100
    And the network on my server more died than alive :-(
    What is it?

    Hi Hema,
    There could be various things that explain this, but from your symptoms it looks like the engine is hung processing this report. This could be as simple as a PL/SQL trigger that is in an infinite loop. Anyway, a simple thing to do is to add TRACEFILE=filename&TRACEMODE=append&TRACEOPTS=TRACE_ALL onto your URL. This will create the specified file and dump information into it about what Reports is doing as it is processing your report. If it is hung in an infinite loop, you should be able to see how far it got when you kill it.
    Also, you can see the status of the reports job queue by using the http://.../rwcgi60?showjobs command. If the report is executing forever, you'll see it sitting there in the job queue.
    regards,
    Stewart

  • Installing Apex 4 on Oracle 11.2.0.3 with Oracle HTTP Server on WINDOWS

    Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
    TIA!

    Vorlon1 wrote:
    Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
    TIA!After a database re-install on my Windows 7 laptop 2 months ago I tried to install the HTTP server but had trouble getting it to work. After a day or two I gave up and used the EPG which works with some performance issues - pages can take many seconds to render. I think there is a conflict between the EPG and security software on the laptop but have not been able to pin down the exact problem. Anyway, the EPG is not an option for you and even Oracle does not reccommend it for production implementations. The EPG is okay for quick-and-dirty R & D but real implentation should have something better. I prefer the EPG on my laptop because the Apex listener required an extra window to be open that I was likely to close by mistake (my error yes. Reality is sometimes stupid).
    I have had several sucessful installs on older versions of Apex on Oracle 9 and 10 on Windows XP using the HTTP server but always struggle with the configuration; getting the settings in the .conf file (whatever it is called now) correct remains difficult (at least for me). I keep installation notes on problems encountered and their solutions. Typical issues I encounter are
    1. Incorrect configuration file settings
    2. Improper loading of images
    3. Missing installation steps (unlocking ANONYMOUS, for instance, or not updating the PL/SQL version).
    4. Make sure the correct URL is being used
    5. When using the HTTP Server making sure it is running by using its URL is very heplful
    Follow the installation instructions for your platform and listener. If something does not work first review the installtion instructions very carefully, then perform web searches for answers to the problem. Except for last time when I lost patience with the HTTP server the installations have always worked.
    I also find Windows 7 painful - the added security prevents me from editing needed files without jumping through hoops. I don't even want to think about Windows 8 ...

  • Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

    Hi,
    I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
    In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
    During the process, I faced some issue with the output server in printing the labels.
    When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
    The file is move to the error folder and an error file is getting generated which contains the error message as given below:
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
    2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
    The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
    I also verified the license and it is a valid licence.
    Kindly help me out in solving this issue.
    Thanks
    Senthil

    I assume this is too late to help you, but other might need a hint.  I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
    It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
    Hope this helps anyone....
    Vegard

  • How to isolate web applications at URL level with Oracle HTTP Server?

    We have 2 machines each for oracle web cache, oracle http server and oracle application server (oc4j). We would like to host many web applications on this infrastructure. We have an issue with application/web site isolation for maintenance purposes.
    We have several oc4j containers for different web sites/applications but they all use one instance of Oracle Http Server. When we need to make changes to an application/web site or introduce a new web site (URL), we change the OHS configuration and restart OHS on each of the machines.
    As we have many URLs hosted on this OHS and plan to host a lot more (may be around 300), we need a way to slice and dice the URLs so that every change or any change should not need to go through a regression cycle or testing cycle for all the applications each weekend (our change window). When we used Apache earlier, we used to be able to create multiple httpd.conf (process level isolation) to cater to different applications.
    We could do this with Oracle Http Server too but Oracle will not support us. I appreciate any advice or suggestion with this issue.
    Thank you
    Ramana

    Hi Joey,
    A great idea! I recently presented at a local user group meeting about my WebSockets API (see the links in my signature). I've uploaded the presentation and the demo code I gave to our UG here.
    I think the barrier to entry is with needing to know the web languages (e.g. html/css/js) as well as writing your LabVIEW code. I have joined the group and look forward to seeing some interesting content on there! Certainly some demos of using AJAX to make requests to Web Services and do something with the data (e.g. display on a graph) would be a good place to start.
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • Having trouble with the HTTP Server vi

    I'm having trouble using the HTTP Server program to view the front panel of my program remotely.
    When I initially start the server program everything works fine. However, the program hasn't been able to run for more than one or two days at a time before it freezes and won't display the front panel.
    The only clue I can see as to what is going on is that there are always several pending connections and active connections listed in the HTTP Server front panel when it isn't working properly. Stopping the server and starting it again fixes the problem temporarily and it works fine for another day or two.
    Any ideas about what might be causing this problem?

    Which OS do you have? Win95 and 98 are not very stable systems, so you might want to try with WinNT. You should be able to run the HTTP server for few days on WinNT.
    Since restarting the server solves the problem, maybe you can try to programmatically restart the server every 24 hours. This can be done within LabVIEW with the HTTP Server Control.vi. Be aware that this will close all the connections, not just the pending ones.
    Does this problem happen every couple of days, or are you able to run it sometimes for a longer period time? Is it related to how many clients request control?
    Also, take a look at the Access Log, and see if you notice anything strange at the time when the problem happens.
    I hope this helps.
    Have a pleasant day.
    Zvezdana S.
    Nat
    ional Instruments

  • HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?

    Are there any ventilation issues with running a macbook air in clamshell mode?

    ...that makes sense to me. 
    but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard?  Is this claim based on an old macbook design?
    for example, here's a related discussion (although fairly old): 
    11-08-2010, 12:16 PM
      #6 (permalink)
    SP Forsythe 
    Notebook Evangelist
    Join Date: Jul 2007 
    Location: California
    Posts: 660
    Rep Power: 14
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    Quote: 
    Originally Posted by tHE j0KER
    Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
    A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.) 
    Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port.. 
    Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
    Currently using:
    Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
    MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
    11-08-2010, 02:34 PM
      #7 (permalink)
    ajreynol 
    Notebook Virtuoso
    Join Date: Mar 2009 
    Location: Ann Arbor, MI
    Posts: 2,542
    Rep Power: 18
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
    17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
    Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
    HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
    Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
    Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
    Disable Vaio beep when pressing volume or special keys
    11-08-2010, 03:34 PM
      #8 (permalink)
    doh123 
    Without ME its just AWESO
    Join Date: Feb 2009 
    Posts: 3,282
    Rep Power: 22
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
    2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
    Mac OS X Gamer/Porter
    (We do exist!)
    Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
    11-08-2010, 03:38 PM
      #9 (permalink)
    Wolfpup 
    Notebook Virtuoso
    Join Date: Jun 2007 
    Posts: 3,871
    Rep Power: 28
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
    As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
    11-08-2010, 03:45 PM
      #10 (permalink)
    SP Forsythe 
    Notebook Evangelist
    Join Date: Jul 2007 
    Location: California
    Posts: 660
    Rep Power: 14
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    Quote: 
    Originally Posted by doh123
    1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
    Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
    Currently using:
    Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
    MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion

  • Error when I try to run HTTP Server

    Hi there,
    I am trying to start HTTP server so that I may setup and use WorkFlow (Process Flows). I am using OWB 9.2 and Workflow 2.6.2 on Windows XP. Here is what I get when I start the HTTP Server:
    -------------------- in a DOS Window ----------------
    Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf:
    FastCgiServer: redefinition of a previously defined FastCGI server "c:/oracle/ora92/bin/isqlplus"
    Note the errors or messages above, and press <ESC> key to exit. ...
    I tried reinstalling HTTP server but it did not help. I am not sure what is wrong and hot fix it. I think without HTTP server, I may not be able to run my "Process Flows".
    Please advise!
    TIA,
    Muhammad Amer

    Thanks Igor!
    I understand that in order to run Process Flows from within OWB, I do not need HTTP server. But I want to be able to schedule the "Process Flows" and some of the documentation I have read suggests that I need to configure and run HTTP Server. I am not quite sure if OEM fits into this process, too?
    Could you kindly let me know if I'd need to schedule the jobs through OWM or OWF Manager is enough?
    Also, whether we can run non-OWB jobs using OWF - for example, a PL/SQL Package and/or a Unix script? If the answer is yes, what is required to accomplish this? My organization does not have a job-scheduling tool and I want to find out if OWF can do this for us.
    Thank you once again and I look to hearing from you soon.
    Best regards,
    Amer

  • Working with IBM HTTP Server 2.0.47.Planning to upgrade.

    Hi,
    My webgate is configured with IBM HTTP Server 2.0.47 and now i would like to upgrade the Server and add a new webgate to it.
    Now i am planning to upgrade to a higher version of IBM HTTP Server.
    But i am not able to find any version of IBM HTTP Server compatible with Apache 2.2.0
    So can anyone help me in this.
    Is IBM HTTP Server 6.1 equivalent to Apache 2.2.0

    Hi,
    You'll have to compile yourself for different PHP API versions.
    Regards,
    George

  • Having issues with getting SQL Server Express to start services and run.

    Good afternoon everyone,
    I have been working on a 2012 R2 server getting ready to move databases to new hardware.  I had SQL Server Express 2008 R2 running on this server with no issues.  I was handed another software package that ran SQL Express 2012 and had to for compatibility
    reasons.  I have had multiple versions run on Server 2012 before with no issues.  This time, not so lucky.  When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
    would not allow me to run software.  I then tried the db that I had installed on 2008 R2 and it also gave the  same error as the 2012 version.  IN basic terms the required services attempted to start and shut back down again.  I have received
    Error 1068 about database handles and error %%945.   I know this db has plenty of space and the permissions were added for the Admin account to access both db's.  I then uninstalled both versions and tried again, with the same errors listed when
    I tried to start the services.     I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified.  I have researched all the errors I can find, however I am very
    new with SQL anything so I know I am missing something.   I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here. 
    Thanks,
    Matt
    Error Log follows, server and domain names have been blacked out with ****.
    2015-04-15 11:57:55.16 Server      Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64) 
    Dec 28 2012 20:23:12 
    Copyright (c) Microsoft Corporation
    Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    2015-04-15 11:57:55.16 Server      (c) Microsoft Corporation.
    2015-04-15 11:57:55.16 Server      All rights reserved.
    2015-04-15 11:57:55.16 Server      Server process ID is 4104.
    2015-04-15 11:57:55.16 Server      System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
    2015-04-15 11:57:55.16 Server      Authentication mode is WINDOWS-ONLY.
    2015-04-15 11:57:55.16 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
    2015-04-15 11:57:55.17 Server      The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
    2015-04-15 11:57:55.17 Server      Registry startup parameters: 
    -d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
    2015-04-15 11:57:55.17 Server      Command Line Startup Parameters:
    -s "SQLEXPRESS"
    2015-04-15 11:57:55.48 Server      SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
    no user action is required.
    2015-04-15 11:57:55.48 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2015-04-15 11:57:55.48 Server      Detected 8157 MB of RAM. This is an informational message; no user action is required.
    2015-04-15 11:57:55.48 Server      Using conventional memory in the memory manager.
    2015-04-15 11:57:55.68 Server      This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
    2015-04-15 11:57:55.68 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
    only. No user action is required.
    2015-04-15 11:57:55.69 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2015-04-15 11:57:55.72 Server      Software Usage Metrics is disabled.
    2015-04-15 11:57:55.73 spid5s      Starting up database 'master'.
    2015-04-15 11:57:55.79 spid5s      20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-04-15 11:57:55.79 spid5s      0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-04-15 11:57:55.80 Server      CLR version v4.0.30319 loaded.
    2015-04-15 11:57:55.86 spid5s      Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
    2015-04-15 11:57:55.89 Server      Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
    2015-04-15 11:57:55.91 spid5s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
    2015-04-15 11:57:55.91 spid5s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
    2015-04-15 11:57:55.94 spid5s      SQL Trace ID 1 was started by login "sa".
    2015-04-15 11:57:55.94 spid5s      Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
    2015-04-15 11:57:55.96 spid5s      Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
    2015-04-15 11:57:55.96 spid5s      Starting up database 'msdb'.
    2015-04-15 11:57:55.96 spid9s      Starting up database 'mssqlsystemresource'.
    2015-04-15 11:57:55.96 spid5s      Error: 17204, Severity: 16, State: 1.
    2015-04-15 11:57:55.96 spid5s      FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1.  OS error: 3(The system cannot find the path specified.).
    2015-04-15 11:57:55.96 spid5s      Error: 5120, Severity: 16, State: 101.
    2015-04-15 11:57:55.96 spid5s      Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
    2015-04-15 11:57:55.96 spid5s      Error: 17207, Severity: 16, State: 1.
    2015-04-15 11:57:55.96 spid5s      FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
    Diagnose and correct the operating system error, and retry the operation.
    2015-04-15 11:57:55.96 spid5s      File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
    2015-04-15 11:57:55.99 spid9s      The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
    2015-04-15 11:57:56.02 spid12s     A self-generated certificate was successfully loaded for encryption.
    2015-04-15 11:57:56.03 spid12s     Server is listening on [ 'any' <ipv6> 53345].
    2015-04-15 11:57:56.03 spid12s     Server is listening on [ 'any' <ipv4> 53345].
    2015-04-15 11:57:56.03 spid12s     Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
    2015-04-15 11:57:56.03 spid12s     Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
    2015-04-15 11:57:56.04 spid12s     Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
    This is an informational message only. No user action is required.
    2015-04-15 11:57:56.04 Server      SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
    message. No user action is required.
    2015-04-15 11:57:56.04 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
    Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
    manually registered.
    2015-04-15 11:57:56.04 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
    to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
    registered.
    2015-04-15 11:57:56.09 spid9s      Starting up database 'model'.
    2015-04-15 11:57:56.10 spid9s      Error: 17204, Severity: 16, State: 1.
    2015-04-15 11:57:56.10 spid9s      FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1.  OS error: 3(The system cannot find the path specified.).
    2015-04-15 11:57:56.10 spid9s      Error: 5120, Severity: 16, State: 101.
    2015-04-15 11:57:56.10 spid9s      Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
    2015-04-15 11:57:56.10 spid9s      Error: 17207, Severity: 16, State: 1.
    2015-04-15 11:57:56.10 spid9s      FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
    Diagnose and correct the operating system error, and retry the operation.
    2015-04-15 11:57:56.10 spid9s      File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
    2015-04-15 11:57:56.10 spid9s      Error: 945, Severity: 14, State: 2.
    2015-04-15 11:57:56.10 spid9s      Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space.  See the SQL Server errorlog for details.
    2015-04-15 11:57:56.10 spid9s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
    

    Hi HMLunger,
    Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
    However, if you fail to start SQL Server Express service after successfully installing SQL Server,
    you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
    thread.
    NET START MSSQL$SQLEXPRESS /f /T3608
    SQLCMD -S .\SQLEXPRESS
    ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    go
    exit;
    ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
    NET STOP MSSQL$SQLEXPRESS
    In addition, you can follow the steps in this KB article to uninstall SQL Server.
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Issues with running Server 2012R2 Essentials as an Offline Standalone Root CA?

    Hi everyone,
       I've searched this forum as well as Google and have not been able to find any concrete answers so I am hoping one of you experts will be able to assist me.  
       I have an all Windows 2008 server/domain enviroment.   I was looking at implementing a two-tier PKI with an offline, standalone root CA and an enterprise issuing CA (2008 member server).   Budgets are tight so I was hoping
    I could get away with using Server 2012R2 Essentials as the offline standalone root.  
       It is my understanding that 2012 Essentials is configured as a DC by default and needs to remain that way per licensing.   I know the recommended configuration for an offline root would be to have the server be in a workgroup and not
    on a domain.
       So question 1 is will 2012 Essentials work as an offline standalone root?
       Question 2 is will there be any issues with it running as described?   In other words will the fact that it is the sole DC in its own domain cause issues with its use as an offline root?  
       Thank you in advance for your help!

    The essentials experience role runs on server standard and is very different from the essentials product in both licensing and pricing. While you can indeed buy standard and deploy the essentials experience role as a "standalone" server, there
    would be ZERO benefit in a PKI offline root scenario the essentials role has no automation or configuration options in the dashboard for that use case, and pricing, you'd still be paying for server standard.
     The essentials product (or SKU) has the benefit of reduced cost, but cannot be deployed standalone and has enough other restrictions that it is not well suited for the given desired use.
    So either way, my answer stands. Essentials (prodct it role) is not the right tool for the job in this case.

  • Stuffit issues with an SMB server? Running 10.7.3

    I use a MBP running 10.7.3. I need to use Stuffit to stuff things to an SMB server. Whenever I try, it gives me error #17527 (insufficient access privileges). Any idea how this could be resolved?
    We used to use an AFP version of the same server, but due to the Adobe Creative Suite issues with Lion, we had to switch to SMB to get any work done.
    Any help would be great.

    Support - Smith Micro

  • Issue with Integrated Weblogic Server in JDeveloper

    Hi
    I'm using JDeveloper version: 11.1.1.7
    I'm facing issue with the Integrated Weblogic server in JDeveloper.
    When I run the server, the log says as follows:
    *** Using port 7101 ***
    D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar
    PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ADE\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin;C:\Program Files (x86)\Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8
    *  To start WebLogic Server, use a username and   *
    *  password assigned to an admin-level user.  For *
    *  server administration, use the WebLogic Server *
    *  console at http:\\hostname:port\console        *
    starting weblogic with Java version:
    java version "1.6.0_51"
    Java(TM) SE Runtime Environment (build 1.6.0_51-b31)
    Java HotSpot(TM) 64-Bit Server VM (build 20.51-b02, mixed mode)
    Starting WLS with line:
    D:\Java\JDK16~1.0_5\bin\java -client   -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy -agentlib:jdwp=transport=dt_socket,server=y,address=49879 -Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=www-proxy.idc.oracle.com -Dhttp.proxyPort=80 "-Dhttp.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Dhttps.proxyHost=www-proxy.idc.oracle.com -Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true  -Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM -Dweblogic.log.Log4jLoggingEnabled_uim=true -Dlog4j.configuration_uim=loggingconfig.xml -Duim.logging.watchdog.timer=5000 -Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp -Dweblogic.management.discover.retries=6 -DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig -Dsun.lang.ClassLoader.allowArraySyntax=true  -XX:-UseSSE42Intrinsics -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.authz=ACC -Xverify:none  -da -Dplatform.home=D:\fmwps6\WLSERV~1.3 -Dwls.home=D:\fmwps6\WLSERV~1.3\server -Dweblogic.home=D:\fmwps6\WLSERV~1.3\server  -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=D:\fmwps6\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1 -Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1  -Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml  -Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol  -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true  -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath  weblogic.Server
    Listening for transport dt_socket at address: 49879
    Debugger connected to local process.
    <Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Aug 16, 2013 7:19:44 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.51-b02 from Sun Microsystems Inc.>
    <Aug 16, 2013 7:19:44 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for BUG13114768 Sat Jan 21 16:14:44 IST 2012
    WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638 >
    <Aug 16, 2013 7:19:47 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Aug 16, 2013 7:19:47 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
    <Aug 16, 2013 7:19:47 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
    <Aug 16, 2013 7:19:56 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log.>
    Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
    INFO: Notification sent for Mapping config object reloaded
    Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
    INFO: Notification sent for Mapping config object reloaded
    <Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Aug 16, 2013 7:20:20 PM IST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source InventoryTxDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
    <Aug 16, 2013 7:20:22 PM IST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "mds-commsRepository". Connections will not be tested.>
    <Aug 16, 2013 7:20:39 PM IST> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
    <Aug 16, 2013 7:20:58 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application UIMCMWSAdapter is not versioned.>
    <Aug 16, 2013 7:21:11 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application oracle.communications.inventory is not versioned.>
    <TableBuilder> <_buildSchema> Metric table "webcache:request_filter_denied_stats" has no key column.  It will not be collected.
    <TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Information" has no key column.  It will not be collected.
    <TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Performance" has no key column.  It will not be collected.
    <TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Response" has no key column.  It will not be collected.
    <TableBuilder> <_buildSchema> Metric table "reports:Reports_Servlet_Response" has no key column.  It will not be collected.
    <TableBuilder> <_buildSchema> Metric table "reports:Remote_Bridge_Elements" has no key column.  It will not be collected.
    <ConfigurationUtil> <getProperties> Could not load runtime-poms.properties
    <Aug 16, 2013 7:21:52 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection www.terracotta.org/80 now.
    java.net.UnknownHostException: www-proxy.idc.oracle.com
      at java.net.Inet6AddressImpl.lookupAllHostAddr(Native Method)
      at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:876)
      at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)
      at java.net.InetAddress.getAllByName0(InetAddress.java:1180)
      at java.net.InetAddress.getAllByName(InetAddress.java:1110)
      Truncated. see log file for complete stacktrace
    >
    <Aug 16, 2013 7:21:53 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection svn.terracotta.org/80 now.
    java.net.UnknownHostException: www-proxy.idc.oracle.com
      at java.net.InetAddress.getAllByName0(InetAddress.java:1184)
      at java.net.InetAddress.getAllByName(InetAddress.java:1110)
      at java.net.InetAddress.getAllByName(InetAddress.java:1046)
      at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)
      at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)
      Truncated. see log file for complete stacktrace
    >
    <LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.
    <AdfDiagnosticsJarsVersionDumpImpl> <dumpVersionInfo> Path of the jars version dump :D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv
    <FeatureUtils> <_resolveFeatures> Ignoring feature-dependency on feature "AdfDvtCommon".  No such feature exists.
    Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
    Started: ADF Library non-ADFJspResourceProvider post-deployment
    Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 223
    <Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
    <Aug 16, 2013 7:22:08 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Aug 16, 2013 7:22:09 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 14.96.8.250:7101 for protocols iiop, t3, ldap, snmp, http.>
    <Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
    <Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    But it doesn't list the server while deploying the application.
    I don't see the issue in my office network. But I encounter this problem when I work at my home.
    Ideally it should show the following lines after server is started:
    DefaultServer startup time: 195467 ms.
    DefaultServer started.
    This is not happening if i run the server without network.
    How can I fix this problem?
    Thanks
    Ravi

    I see some message about a proxy. Have you checked that you can use the proxy from you network?
    If not you should turn the proxy off.
    Timo

  • Using php with oracle http server

    Hello folks
    This question might have been answered on this forum, but i haven't found it yet.
    Is it possible to integrate php into the apache server that is supplied with the oracle (9.2) database, the so called Oracle HTTP Server?
    What technical issues are to consider and how do you do it on linux in that case? (SLES8)
    Is there any support issues to consider if somebody modifies this oracle supplied http server?
    Looking very much forward to some help...
    Regards,
    Christian

    Well it was a spelling mistake in the beginning. I get the following output now:
    ./configure --with-oci8=$ORACLE_HOME \
    --with-apxs=/opt/oracle/product/9ir2/Apache/Apache/bin/apxs \
    --enable-sigchildcreating cache ./config.cache
    checking host system type... i686-pc-linux-gnu
    checking for gcc... gcc
    checking whether the C compiler (gcc ) works... yes
    checking whether the C compiler (gcc ) is a cross-compiler... no
    checking whether we are using GNU C... yes
    checking whether gcc accepts -g... yes
    checking whether gcc and cc understand -c and -o together... yes
    checking how to run the C preprocessor... gcc -E
    checking for AIX... no
    checking if compiler supports -R... no
    checking if compiler supports -Wl,-rpath,... yes
    checking for re2c... exit 0;
    checking for ranlib... ranlib
    checking whether ln -s works... yes
    checking for gawk... gawk
    checking for bison... bison -y
    checking for bison version... 1.35 (ok)
    checking for flex... lex
    checking for yywrap in -ll... no
    checking lex output file root... ./configure: line 2425: lex: command not found
    configure: error: cannot find output from lex; giving up

  • ISSUES WHILE STARTING HTTP SERVER FOR A NEW INSTALLATION OF 10G AS

    I installed 10g AS version 10.1.3.1. I am having this issue while running the installation:
    The Configuration assistants are failing with the following error:
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=621769602,pid=30999)
    failed to start a managed process after the maximum retry limit
    Log:
    /opt/dba/oracle/product/10.1.3.1/OracleAS_1/opmn/logs//HTTP_Server~1.log
    Configuration assistant "Oracle Process Management and Notification Configuration Assistant" failed
    I am using a staticports.ini file with the following values
    Oracle HTTP Server port =81
    Oracle HTTP Server Listen port = 81
    Oracle HTTP Server SSL port = 444
    Oracle HTTP Server Listen (SSL) port = 444
    I am not sure what the following are for and what values i should for them so i commented them
    #Oracle Notification Server Request port = port_num
    #Oracle Notification Server Local port = port_num
    #Oracle Notification Server Remote port = port_num
    #ASG port = port_num
    Has anyone encountered this issue ??

    Port numbers less than 1024 are privileged ports on Unix/Linux. In order for OHS to run on one of the privileged port (e.g. 81 and 441 in your case) you must enable OHS to run as root. By default OHS runs a non-root user, the user that installed Oracle Application Server.
    So to start with installer do not specify custom (static) ports and complete the installation. OHS will be assigned some non-privileged port by installer. Post installation follow the instructions here to change the ports to 81 and 441:
    http://download.oracle.com/docs/cd/B32110_01/core.1013/b32196/ports.htm#CIHJEEJH
    Thanks
    Shail

Maybe you are looking for