EA6500 Parental controls error code 2183

When I try to change the allowable user times for my kids itouch I get error code 2183.
I have EA6500 V1 running firmware 1.1.29.16235 I have reset by router from scratch. I have uninstalled and then downloaded and reinstalled the latest lynksys smart wifi setup. Time zones of control computer and router are same.
The error code has following details:
/jnzp/parentalcontrol/SetparentalcontrolsSetting - Status: 200 OK Date SUN. 28 Sep 21014 01:55:29 GMT Server:
lightpd/1:4.34 Connection: close Content-Length: 39 Content-Type: application/json: charset-utf-8
I'm ready to trash the router and get something non-cisco.
Any help?

To safely update FW, I recommend doing the following:
Log into the LOCAL LOGIN at 192.168.1.1 bottom right link, not LinksysSmartWiFi!
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file.
PC 3rd Party Security Software Configurations
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired LAN PC while testing.
Disable any downloading client software managers, i.e. Torrents or similar.
PC Web Browser Configurations What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches. Be sure to log into the Admin account on the router.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings. Uncheck these: Use a web service to help resolve navigation errors Use a prediction service to help complete searches and URLs typed in the address bar Predict network actions to improve page load performance Enable phishing and malware protection

Similar Messages

EA6500 Parental Control or Access Restrictions question

I have been looking into this router, I woujld like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?
Instead of Midnight to 6:00 am.
My E4200 works just fine, Just would like to know if the EA6500 Can do that ?
Thanks
Chris
Solved!
Go to Solution.

Yes, you can block a device on the network from accessing the internet from 3 AM to 6 AM.
Screen snippet I just took from my EA6500:
As for blocking it by IP address or MAC Address directly, no you can't, you have to select it from the device list, but from what I've seen, you have to do that on the E4200 as well, so that's nothing different.
There have been people expierencing issues with their device lists on the EA6500, but I've rarely had any since a few fimeware updates ago, and usually refreshing the page or clicking the in-page refresh button, fixes those when they do happen to occur. (In my case.)
And in response the the second post, although it's only apart of the wireless and unrelated to parental controls, the EA6500 does have MAC Filtering:

ITunes Parental Control error

I have a problem. For some reason, I had locked the parental control for my copy of iTunes. Now, I want to open it up and change my settings. I use my password (I'm one of two people who have Admin access on this computer) and I get an "unknown error (1909)" after I enter my username and password, and then it won't unlock.
Is there a way to reset the parental control so it's unlocked?

To isolate the concern, use another browser or computer to configure parental control. If that is not going to work, restart the computer and power-cycle the router and try the setup again. Also make sure the router’s firmware is up to date.

I forgot my parental controls pass code on my kids iphone 5

I forgot my parental control pass word on my kids iPhone 5s

You will have to restore the iPhone as new (and erase everything on it) to reset it.
-> iOS: Understanding Restrictions (parental controls)
"3. Tap Enable Restrictions and enter a passcode. The passcode will be required to make changes to these settings or to disable Restrictions. Note: If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it."

Customize the parental control error message page for Linksys E45000

Is there I can customize the error page which is shown when someone visits a blocked site

I'm afraid it doesn't have that feature. This router was not designed to have that feature.

HT201304 How do I disable parental controls?

I forgot the parental controls pass code, and I need to unlock it. I do not have a computer with me (I use a computer at work only). Is there a way to disable it without a computer? I'm asking this question on his ipad. Thank you for your help!

Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

After Mavericks upgrade, Parental Controls shows error

When trying to change settings in Parental Controls for a user, it shows "error occurred in Parental Controls pane". The prevous OS was Lion and I was using Parental Controls to limit the hours for the user.

One more with the same problem - here is the log file that the issue generated I hope this helpsAfter Mavericks upgrade, Parental Controls shows error
3/25/14 9:48:24.372 PM com.apple.preferences.parentalcontrols.remoteservice[733]: Parental Controls Pref Remote Service launching
3/25/14 9:48:24.404 PM com.apple.preferences.parentalcontrols.remoteservice[733]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
3/25/14 9:48:24.422 PM com.apple.preferences.parentalcontrols.remoteservice[733]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
3/25/14 9:48:24.556 PM com.apple.preferences.parentalcontrols.remoteservice[733]: GetICUWeekdayWeekendInfo [773] -- *** ICU lookup failed, using default values
3/25/14 9:48:25.219 PM com.apple.preferences.parentalcontrols.remoteservice[733]: Bogus event received by listener connection:
<error: 0x7fff749e1b50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff749e1e60> { length = 18, contents = "Connection invalid" }
3/25/14 9:48:33.854 PM launchservicesd[53]: Application App:"System Preferences" asn:0x0-72072 pid:700 refs=8 @ 0x7fec18425960 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x79079 pid=735 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100005/0x186a5 queue
3/25/14 9:48:33.854 PM WindowServer[128]: [cps/setfront] Failed setting the front application to System Preferences, psn 0x0-0x72072, securitySessionID=0x186a5, err=-13066
3/25/14 9:48:54.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1099c8000): p=733[com.apple.prefer] final status 0x1000a00, denying page sending SIGKILL
3/25/14 9:48:54.000 PM kernel[0]: CODE SIGNING: process 733[com.apple.prefer]: rejecting invalid page at address 0x1099c8000 from offset 0x1000 in file "/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/Contents/MacO S/ksadmin" (cs_mtime:1337806864.0 == mtime:1337806864.0) (signed:1 validated:1 tainted:1 wpmapped:0 slid:0)
3/25/14 9:48:54.829 PM System Preferences[700]: view service marshal for <NSRemoteView: 0x7fd42853b640> failed to order out windows in service window group for which service is presenter due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from the other process or the connection name was invalid.) UserInfo=0x600000664b80 {NSDebugDescription=The connection was invalidated from the other process or the connection name was invalid.}
timestamp: 21:48:54.829 Tuesday 25 March 2014
process/thread/queue: System Preferences (700) / 0x101a64000 / com.apple.NSXPCConnection.user.endpoint
code: line 2972 of /SourceCache/ViewBridge/ViewBridge-46.2/NSRemoteView.m in __57-[NSRemoteView viewServiceMarshalProxy:withErrorHandler:]_block_invoke
domain: communications-failure
3/25/14 9:48:54.845 PM com.apple.launchd[1]: (com.apple.preferences.parentalcontrols.remoteservice[733]) Exited: Killed: 9
3/25/14 9:48:55.111 PM ReportCrash[737]: Saved crash report for com.apple.preferences.parentalcontrols.remoteservice[733] version 1.0 (1.0) to /Users/robert/Library/Logs/DiagnosticReports/com.apple.preferences.parentalcont rols.remoteservice_2014-03-25-214855_Primo-Mac-5.crash
3/25/14 9:50:55.479 PM com.apple.preferences.parentalcontrols.remoteservice[743]: Parental Controls Pref Remote Service launching
3/25/14 9:50:55.510 PM com.apple.preferences.parentalcontrols.remoteservice[743]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
3/25/14 9:50:55.526 PM com.apple.preferences.parentalcontrols.remoteservice[743]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
3/25/14 9:50:55.720 PM com.apple.preferences.parentalcontrols.remoteservice[743]: GetICUWeekdayWeekendInfo [773] -- *** ICU lookup failed, using default values
3/25/14 9:50:56.339 PM com.apple.preferences.parentalcontrols.remoteservice[743]: Bogus event received by listener connection:
<error: 0x7fff749e1b50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff749e1e60> { length = 18, contents = "Connection invalid" }

Smart Wi-Fi error 2178 while editing parental controls - EA2700 router

Hi, I am seeing an "unexpected error 2178" while trying to edit the parental controls in Linksys Smart Wi-Fi. I have been editing the parental controls without any issues previously and wondering why this happened? My EA2700 router has the latest firmware 1.1.39.145204. I have tried other computers and get the same error code. I have also tried to disable the firewall, reboot the PC, router and modem. Linksys defines the troubleshooting error 2178 as "Only one edit pane can be opened at a time. The existing pane will be displayed" which makes little sense as there is only one standard pane anyway, and i don't open Smart Wi-Fi in other computers simultaneously. I think this error has something to do with the Linksys server. The expanded detail of the error message says: /jnap/parentalcontrol/SetParentalControlSettings -- Status: 200 OK Content-Type: application/json; charset=utf-8 Connection: close Content-Length: 38 Date: Sat, 29 Jun 2013 02:31:02 GMT Server: lighttpd/1.4.28
Other editing functions in Smart Wi-Fi works normally, only the parental controls. The router also works fine. Help on this is much appreciated!

Is there any representative from Cisco that reads this forum? I certainly would like Cisco to check their server for any bug that is causing this error! This is getting really frustating with no support from Cisco at all. Big regret buying this router!!

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

Transport control program tp ended with error code 0208

Hello
I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
System   NSP              Command TMS_MGR_READ_TRANSPORT_QUEUE
Client   000              Service Transport Service
User     TMSADM           Start    Online
Date     12.10.2006       Function TMS_TP_SHOW_BUFFER
Time     07:13:13         Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing
unknown,.
Any Idea? Thanks for your help.
Regards, George

Hi
You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
Hope that helps.

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

Transport control program tp ended with error code 0247

Hi,
Our landscape is such that any transport request once released, gets imported to Q system immediately. However there is another system (another box REG - regression testing) to which I would like to import a request but the transport queue of REG system does not show the request. So I tried to explicitly add it to the queue but I get the following error message, 'Transport control program tp ended with error code 0247.
There doesn't seem to be a problem with data & CO files as the same request is in Q system and the changes are all transported successfully.
This request is a transport of copy that contains some ABAP code. (changes to the relevant package can be saved only in local requests therefore transport of copy is recommended to transport the changes).
The changes appear correctly in Q system but for REG system the request neither appears in the queue nor be added to it.
Can someone advise where the problem is.
Cheers,
KC

Hi
When the REG system is not in the system landscape, probably you may not have Data & Co files in that system & you need to have those files separately in the REG system path & then import it.
Do consult Basis team on this issue.
Thanks,
Murali.

STMS: Transport control program tp ended with error code 0232

Dear ERP Gurus,
I just encountered problem with STMS in my PRD system. The import is just stuck up on "tp connecting to database". It won't continue unitl the system gives me this error message:
Transport control program tp ended with error code 0232
Errors: connect failed
The tp System log says:
ERROR: Connect to PRD failed (20090227135454, probably wrong environment)
I have verified that the suggestion in SAP Note 165708 has already been implemented in our DEV, QAS, and PRD instances.
Any idea why I am having this problem? Imports were running fine yesterday. Please help.
Your prompt response is highly appreciated.
Thanks a lot.
Best Regards,
Albert

Hi Albert,
First check import monitor and delete all requests from queue, which are still getting imported.
And go to /usr/sap/trans/tmp and mv all those tmp files to other location.
Then kill all OS jobs which are getting execute with tp.
Check all jobs are runnig fine, related to transportation. If not reschedule the same.
Then start importing.
Before doing this just check whether your stms related RFCs are working fine.
I think One of your RFC is getting struck. just try to change ip or hostname accordingly and try.
Regards
Nick Loy

Transport control program tp ended with error code 0232

Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
Della

I've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect            Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc     ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc     ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc     ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc     ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc     ,00000]    >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc     ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc     ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc     ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc     ,00000] Client NLS setting (OCINlsGetInf

Transport Controll Program tp ended with error code 0012

we have 3 instances 1 DEV 2 TEST 3 PROD.
in TCODE:STMS by clicking 'system overview' icon
all systems are showing and domain controller is PROD,
and <u>Test System also defined as Transport Domain Cotroller.</u>
earlier STMS scenario: Transport Route is from DEV to PROD system not to the TEST system.
what I have done:
deleted the Transpor Domain Controller of the TEST system and kept as test system.
create routes from DEV to TEST to PROD.
present STMS problem:
when I am sending Request from the DEV to TEST Request going smootly. but at TEST sytem while importing the Request it is giving the ERROR as "<b>Transport control program tp ended with error code 0012</b>"
please help out me....as soon as possible.

This is definitely the wrong forum for your post. Please repost properly.
Regards, Klaus

EA6500 Parental controls error code 2183

Similar Messages

Maybe you are looking for