EA6500 stopped being recognized by wireless printer

Last week, my EA6500 stopped being recognized by my wireless Canon printer. The laptops and ipad can still see the router. How do I fix this? I have tried router power off, and, complete reconfigure as if new. Has not fixed the wireless printer issue. THe printer can see other networks
Also, one suggestion was to do a 'reconnection' to the printer by first pressing a wps button. Does the EA6500 have this button?

Hi jjohnsen8!
In my case, what I did was disable the Simple Tap feature on the router. It's also running on 2.4 GHz so it may have interferred to the network. On the Linksys Smart WiFi, click on Wireless >> Simple Tap >> the select OFF.

Similar Messages

Do I need to reinstall Lion because my iPhone stopped being recognized by...

Do I REALLY need to reinstall Lion because my iPhone stopped being recognized by Image Capture, Aperture and iPhoto but still shows up in iTunes?
I was on the phone with Apple Support with 5 different Advisors for more than 3 hrs today and we were not able to resolve the problem (yet). Although the problem is frustrating, it's always kind of a pleasure chatting with the Advisors. (I said kinda)
Approx 2 weeks ago, iPhoto, Aperture and Image Capture all stopped recognizing my iPhone. Oddly, iTunes has no problem recognizing the iPhone. Here are just a few of the things we tried but didn't get the apps to see the iPhone again:
- Removed and deleted all photos on camera roll using a windows machine
- Removed all other photos synced between my iMac and iPhone
- Made sure an image existed on the camera roll
- Recorded some video on iPhone and then tried to get iMovie to recognize device
- Restored (gulp) the device followed by a restore from back-up
- Restored again (double gulp) but this time to factory settings and kept the device as a "new iPhone"
- Logged on as different users
and on and on.
Also, after noting that my machine refused to send a systems report to my Sr Advisor (Jimmy) at Apple, he suggests we re-install Lion (ack). But when we went to access the Recovery Partition we realized it wasn't there.
No recovery partition?
Not sending system reports to Apple?
Several Apps not seeing iPhone while others are recognizing the device?
So now I wait for Lion to arrive on one of those nifty Apple thumb drives for me to try re-installing ;-(
The following screen grab shows my iPhone in iTunes but not recognized by Image Capture. URGH!

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Ipod video stopped being recognized by computer or itunes

My shuffles and nano still work fine on itunes but my video stopped being recognized and a box will come on the screen that says autoplay with a flashlight going back and forth. I tried all the tips on apples website but nothing has worked.HELP!!!

Head over to the "Connecting Fifth Generation iPod to Windows" forum.
You'll get better help there.
~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM (Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

My ipod nano has stopped being recognized by my mac computer

My ipod nano has stopped being recognized by my mac computer, it used to work and all of a sudden it isn't, please advise...

Hi there,
You may find the troubleshooting steps found in the article below helpful.
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
-Griff W.

Verbatim USB Flash Drive Stops Being Recognized

All of a sudden the other day, my Verbatim USB flash drive just stopped being recognized... it had been mounted, a TM backup made to it when all of a sudden I got an error stating that it had been improperly removed... it was like I had yanked it from the USB port...
I tried unplugging it, reconnecting, rebooting, moving it to another computer... no luck... it doesn't even show up in Disk Utility
Verbatim has agreed to replace it under warranty but I'm wondering if there's anyway that I can mount it again to retrieve the TM backups...
Any thoughts?
Many thanks!
-Justin

My Verbatim 32G flash drive appears on the left, but it will not allow me to repair it, mount, or eject it. It will not show up in Computer like it normally does. I have tried restarting it, turning it off, and doing Command+Option+r+p, which did not work. I believe I caused this problem by accidenlty ejecting the flash drive before safely removing it. How could I make it appear on the Computer again?

My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

HP Officejet Pro 8500 Wireless that has stopped being recognized as powered on

I have an HP Officejet Pro 8500 Wireless that has stopped printing. Troubleshooter identifies that the printer is not powered on, when indeed it actually is powered on. I have tried unplugging the printer and resetting the network information as well as rebooting my computer all to no avail. The printer is being recognized by the network without any issues, just for some reason it doesn't think it is powered up. I very much appreciate and thank you in advance for any information and advice.

Hello there! Welcome to the forums @margarethpayne
I read about the scanning troubles you are running into with your Officejet 8500 Wireless, on 10.6.8. I have some ideas that could help.
In order, try this:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Re-add the printer, this is the direct link for you: HP Officejet Pro Full feature Software and Drivers - Mac OS X v10.6
Try scanning again now.
Let me know the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

IPhone 4S stopped being recognized by my PC. I've tried the other Apple Forum guide, nada.

Hi All,
I've read the other guides and the Apple 101 regarding PC not recognizing the iphone.
It's missing from Device Manager. Uninstalling USB drivers does not help. No other phone works, my phone works on other PC's though.
Syn
I ejected the phone - downloaded some songs on PC itune, updated my library and then tried to plug my phone back in (USB). Nada. It does not show up as a device in explorer.
I've tried it on another computer and it works fine. Nothing is wrong with the chords. Other devices are not being recognized on my PC.
I've tried this forum's solutions: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/iphone-4s-is -not-recognized-and-no-driver/a8232b2f-5f88-4820-b81e-5d7f9c9691f5 --- it was no help
I've tried this link: http://support.apple.com/kb/ts1538 -- nothing worked.
Chords are in working order . I've tested on other computers.
As you can see - drivers missing and not displaying as a device. Software installed numerous times - I even deleted the library files and related in other folders for other software. I've pushed autoplay back to default, and reset all it's settings for recognized devices.
Please help!

Windows Vista or Windows 7
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.

Cannot stop a HP6500A Plus wireless print.

I cannot stop a document printing on my hp 6500A Plus wireless printer once it has started to print. I have to wait till each page tries to print, then press the red X to the right of the printer display window multiple times to kill that page print. I have to do this procedure 75 times to stop a document print of a 75 page document.. It acts like the wireless prints every page separately, so I have to kill each and every page untill all pages have been 'killed'. Stoping a print can take 15 to 20 minutes of such effort. HELP!

I forgot to add the HP 6500 was installed for wireless printing from a Windows 7 64 bit computer. My prints are usually from PowerPoint presentations.

Help! my ipod stopped being recognized by itunes

I plugged my ipod in (i have a pc). it updated, and had finished updating (stopped saying do not unplug)...
then, out of boredom, i changed the name on my ipod icon in itunes, and then i looked at my ipod and everything was gone, all songs, all everything. so i unplugged it and plugged it back in again and it said this:
"cannot recognize ipod. use ipod updater application to restore ipod to factory settings."
according to the support website, there is nothing wrong with me changing the name on my ipod, and it shouldn't have caused everything to be erased. so, after poking around on the help website, it suggested i reset my ipod, so i did, and that didn't work. i looked up instructions on how to do restore it to the factory settings, and it had me download the software updater, but that didn't do anything, and it still doesn't register.
also, i just looked in the "about" option on my ipod, and it says that somewhere all of my songs are on there, because i have 3.7 free gb, and 18.5 used. which sounds about right, except that all my songs are gone.
help, please!!!!

oh also. i forgot a few things. first, itunes completely stopped recognizing my ipod, so i can't change my name back to what it used to be.. every time i try to plug it in, the same error message comes up.
and, also, when i said "it had me download the software updater, but that didn't do anything and it still doesn't register" i mean that its still not being recognized by itunes.
when i looked at the link for restoring factory settings, it didn't make sense to me. i couldnt do the first steps because itunes isn't recognzing anything... i downloaded the updater it told me to, but it wouldn't let me do the whole "start" "run" thing, and i'm not really sure how to do that or how its relevant to what i downloaded, so if whoever helps me out on this could either clarify those instructions or give me different ones, i'd appreciate it.
sorry this is so long-winded.
I just got this last week, i'm kinda sad/annoyed that i'm having problems already.
thanks for any help in advance.

My Canon Pixma 620 suddenly stopped being recognized by my iMac

For the past year I have had no problems printing with my wireless printer. But as of just two days ago I am no longer able to print.
Each time I try to print to my Canon Pixma MP620 printer I get a popup that says The printer is not connected, under which there is a grey moving line, beneath which it says Printing - the printer is offline.
When this first happened I decided to delete and reinstall the printer from my computer, and I reinstalled the driver. The reinstallation worked perfectly and I don't think there is anything wrong with the printer itself. However, when I tried to print again I had the same problem.
I have an iMac OSX 10.8.5. As I mentioned, this only started happening suddenly about two days ago; before that there was never a problem.
Does anyone have any idea what I can do to have my computer and printer communicate again? Do you think there is an update that happened behind-the-scenes that messed this up? Any other suggestions?
Thank you.

Try resetting the printing system http://support.apple.com/kb/ht1341

Microsoft Lifecam Studio stops being recognized while connected

Good day,
We are using Microsoft Lifecam Studuio webcams with Windows 7 PCs to faciliate desktop VTC with Polycom's CMA Desktop. The PCs are multi-user. We are finding that, without touching the webcam, it is stopping to be recognized by the O/S for some unknown reason,
requiring the user to unplug and reconnect the webcam for it to be recognized once again. This is inconvenient as the users do not have easy access to their PCs, nor do we expect that this should be a regular requirement for a peripheral device, once connected
it should remain active.
Are there maybe firmware updates for the Lifecam or a driver update that should be used to correct? (Currently using 6.1.7601.18208) Is the webcam being affected because of multi-user sessions?
Thanks for any advice.

Hi SA Stewart ,
"We are finding that, without touching the webcam, it is stopping to be recognized by the O/S for some unknown reason, requiring the user to unplug and reconnect the webcam for it to be recognized once again"
Do you mean this device will stop working when we try to switch the user or it just stopped suddently ?Will the issue occur regularly ?
We can download the latest fireware update and software for the device here .
LifeCam Studio
http://www.microsoft.com/hardware/en-us/p/lifecam-studio/Q2F-00013#support
If the issue occured when we try to switch the user ,I suggest you to stop the process which is occupying this device from the task manager before we switch the user.
If it is possible ,we can try to connect the device to another machine to verify whether this issue only occurred with this specific machine .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Icc profiles are not being recognized by epson printer from LR 5 in Mac OS 10.10 yosemite

After switching to Mac OS 10.10 (Yosemite) my epson 3880 is no longer recognizing the icc profiles. Is anyone else having this issue?
I've already reinstalled all epson drivers and printer options to no avail. I'm thinking that lightroom and the printer are not communicating the icc profile info?

Striebig wrote:
I'm thinking that lightroom and the printer are not communicating the icc profile info?
That's not how it works. If LR does the color management, it converts the image from its working space (linear ProPhoto RGB) to the space defined by the ICC printer profile that you have designated in the Print module and sends to the printer that (converted) data. The printer driver should be set to "No Color Management" and therefore has no need to know the ICC profile. If you set LR to "Color Management: Managed by Printer", no profile is designated in LR, the data is sent unconverted, and you have to set the driver interface to the appropriate ICC profile - again no communication of the printer profile, although LR does send data that describes the working space so that the driver can make the conversion.

MY IPOD SUDDENLY STOPPED BEING RECOGNIZED BY MY COMPUTER AND WOULDNT CHARGE

I have a weird problem, when I plug my IPOD into my computer, it wouldnt be recognized at all (just lik if I had not plugged anything in). The Ipod would work play songs and work fine, but all of a sudden it would not trigger its detection on my Windows XP. It happened all of a sudden.
It wont even charge, or appear in the list of devices... does anyone here have any idea of what could be the problem?
Thanks a lot
David.

I had this problem before. It ended up that I called
Apple and had to purchase an AppleCare Protection
Plan for $50, only for them to tell me to reset my
iPod. Here is how to do it:
Put your iPod on a flat surface.
Toggle the "hold" switch on and then off, to turn
your iPod on.
Press and hold the MENU and SELECT buttons
simultaneously, until the Apple logo appears on the
screen.
Then try to connect your iPod to your comptuer
again.
I hope this helps!
Wond3rlust, what kind iPod are you refering to? Im having the exact same problem with mine; it justs tarted doing this like alst week, but mine's an iPod shuffle, so it doesn't have "menu" and "select" buttons.
But I'm having the same issue with my shuffle. I don't knwo why its doing this. If i knew it was going to cost problems when it isn't even a year odl yet I wouldn't of gotten the shuffle; I would've gotten the mini or something, but I thought, the shuffle being small and not very high tech and everything, that it would cause no problems at all...obviously i was wrong. I NEED HELP TOO!! IM NOTHING WITHOUT MY MUSIC!

Keyboard stops being recognized

When I turn on my computer, the keyboard is recognized, enough for me to enter my password. After that, the system does not recognize the keyboard. My system does recognize the mouse. So it can read but not write email. (This message was composed on a borrowed PC.) Unfortunately, this somewhat urgent matter.

Thanks for your reply. Before seeing your message, I managed to solve this problem. I was playing with cables. My printer had become unconnected from the system while there were a two jobs in the printer queue. I deleted the jobs As you can see from my ability to type this message, the keyboard is recognized!
There has got to be an OSX bug here. How does one report it? I only "report bugs to Apple" in safari.

EA6500 stopped being recognized by wireless printer

Similar Messages

Maybe you are looking for