EA6500 support for Wi-Fi devices on WPA (TKIP)

Although EA6500 states support for WPA devices it appears that some B devices (like HP Wi-Fi printer PSC 2510) are not supported. The lack of support seems due to the lack of WPA with TKIP encryption, only the newer EAS encryption appears to be available.

pompekw,
You should consider cascading your WRT54G to a new router. That way you can keep your legacy devices.
I have legacy devices too. And that's what I do. If your WRT54G is broken, you can pick up a refurb wireless router that supports WEP and WPA TKIP and B/G for $20. And then you just cascade it to your new router. Use Lan-to-Lan cascade (or bridge mode instructions depending on whether or not the secondary router supports bridge mode). If your WRT54G still works, you can use it as the secondary router (which is what I do).
Cascade link
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3733
Fix #3 in the article below explains it better than I can.
http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
http://www.metageek.net/products/inssider/

Similar Messages

Support for ShopBlackBerry purchased devices?

I am on ATT and purchased a BBZ10 STL100-3 from shopblackberry.blackberry.com and am having problems. The support webpage located at: https://store.shopblackberry.com/DRHM/store?Action=DisplayContactFormPage&SiteID=bbrryus&Locale=en_U... says --------- (snip some) Technical Support Get expert phone support for your BlackBerry smartphone purchased through ShopBlackBerry. Call us at 1-866-957-0761* * Telephone numbers and hours of operation are subject to change. Any applicable local and national telephone rates may apply. Toll free support phone numbers may not be accessible by mobile phones in all countries. Please check with your carrier for availability and / or charge rates. --------- Sounds simple enough. However when calling at 5:20pm CST I spoke with a female named "Charlie" so stated: "I'm sorry sir. You must go through your provider for support. They will give us a "Validation" code so that we can help you and you won't be charged..." So which is it? Is the webpage wrong and I have must use ATT support for a Z10 I purchased via the BlackBerry website, or is the CSR incorrect? My problem: I've changed my security question and reset my password on the bbid.blackberry.com website but can't login via my Z10 anymore. The Z10 keeps saying "incorrect password" and the security question it asks is one that I've changed. Thanks. -- James

aracoma481 wrote:
In regards to your comment that I would probably have to get support from my provider, I'm unsure why the service provider would be involved. BBID is a service, but a service provided by BlackBerry. Isn't the carrier (ATT) just be a transportation method for the BBID sign in data? IE if one takes the ATT sim out of the Z10 shouldn't one be able to still sign in one's device to a BBID via the wireless connectivity of the device? (I don't know BlackBerry's relationship or interdependence (or co-dependence) with carriers but I'm willing to learn.)
In which case, please see this "sticky" post, along with the threads to which it links (especially the formal support one), for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
aracoma481 wrote:
1. I have successfully reset my BBID password and security question on the BlackBerry website. (I believe I was required to delete the BBID on BlackBerry's site to accomplish. As a side note I find it strange I have to sign in via a BBID just to back up my device via a USB cable to my Mac but that's another message.)
If the red part is indeed true (you say only that you "believe" you had to do it...I cannot therefore know if indeed it is accurate), then you must WIPE your device. It has been reported here that destruction and recreation of the BBID causes it to not be recognized when re-integrated to the device unless a device WIPE is done, even if it was recreated with the exact same credentials. My guess is that there is some sort of hidden "token" that is changed in the process, and that token no longer matches, and the only way to clear it from the device is a device WIPE.
Also, I didn't know that there is such an option to do that...the method I've known is via a link that came in the original BBID registration email, but it may have changed as I've never actually had to do what you are doing.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Support for Windows CE devices with StrongArm

Will there be support for the Windows CE devices with the StrongArm processor (like the Compaq iPaq) in Oracle Lite?
Peter Bakker

Which version of Oracle Lite are you on ?
You must be talking about a Windows Mobile 5.0
device. If yes, then Oracle Lite 10.2.0.2.0 and later
should work on that.I appreciate your help Vino on my issue.
You're right, i meant a windows mobile 5.0 device. What i'm confused about is that, i have oracle lite 10g Release 2 installed on my machine however i don't find in the cabinet packages an installer for windows mobile 5.0 device. Should i use the cab file for SDK420? or there is a specific cab file for windows mobile 5.0?
One last question. Do we have two version of Oracle lite 10g Release 2 (one is 10.2.0.1.0 and the other is 10.2.0.2.0)?
Again thanks a lot Vino :)

No support for USB 3 devices on MBA 2013

When I bought the first MacBook Air (mid-2013) I was disappointed to discover that none of my USB 3 devices (external HD and flash card readers) worked with it. Then even USB 2 devices stopped working. I brought it back to the Apple store and was given a new unit. USB 2 devices work with it, but not USB 3 ones. Now, reading this forum and other discussions made me realize that Apple, in a typical Applesque fashion, released a faulty product and will not admit that it created a problem for its gullible consumers – the USB 3 ports on Mac Book Air are underpowered and thus unable to support many USB 3 devices. It is likely that much later Apple will release a firmware update that addresses this issue, once the complaints from user reach a certain critical threshold. But until then we, the Apple suckers, must wait and hope.

Ive got 96 hard drives, of various brands. Ive had no less than 50 of them hooked to the Macbook Air.
If you have a western digital drive (likely), try a different Hard Drive.
There are no USB 3 issues with the Macbook Air.
Again, you didnt mention what USB3 device you have an issue with.
*That link you posted is a year old and the OP hooked the HD to several other Macs and it still didnt work..., meaning he had a faulty HD.
Other mentions were oddball OWC enclosures with power issues, not related to the Mac at all, and Verbatim memory sticks
So, the post you make a link to isnt at all relavent to any issue with the Macbook Air, current 2013 or 2012

Corus360 releases Remote360 support for new Blackberry devices

Atlanta, Friday 13th, 2010 - Corus360, a RIM Select Alliance Partner based in Norcross, has released an update to their Remote360 software which allows it to be now used for support of the new BlackBerry 6 OS and the new BlackBerry Torch smartphones being released by AT&T later this week.
Remote360 is an award winning software that was created by a team of developers at Corus360 and is currently in use by several companies in the United States and other countries to support their BlackBerry® users.
“Corus360’s investment in developing Remote360, an application that can greatly reduce the time to resolution for mobile device issues, results in both time and cost savings for our clients,” said Ted Chappell, EVP, Professional Services of Corus360.
Remote360 allows Help Desk and administrators to remotely control BlackBerry® devices out in the field to troubleshoot and resolve issues, train users and even locate lost devices. Remote360, similar to remote desktop for laptop/PC support, allows support personnel to operate the devices as if they have them in their hands. BlackBerry® 6 is the latest OS released by RIM (Research in Motion, the makers of BlackBerry) and Remote360 has the capability of supporting this OS. The BlackBerry® Torch, their new device, which comes pre-installed with BlackBerry® 6 will go on sale this Thursday by AT&T. AT&T has an exclusive to carry the new Torch and it was announced this past week in a press conference with RIM.
About Corus360
Corus360 is a technology consulting and solutions company with more than 10 years of success helping clients to better leverage their technology investments to satisfy strategic and tactical business requirements. We specialize in best of breed infrastructure solutions, IT management consulting, Data Center technologies, disaster recovery, managed services and enterprise applications.
Corus360 helps organizations solve business problems, reduce costs and enhance efficiency by devising, recommending and deploying business-aligned technology solutions. We apply proven methodologies that help organizations reduce risk, respond more quickly to business challenges and better utilize assets through the full technology lifecycle.

Hello and Welcome to the Forums!
You have some excellent points and suggestions. I would like that those don't miss the mark in reception by RIM. You see, these forums aren't a vehicle to communicate to/from RIM. Rather, these are user-to-user forums where kind souls volunteer to help out other kind souls as best they can. But, I have heard that RIM accepts constructive suggestions at [email protected]
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Email profile support for Samsung Android (KNOX) devices in integrated environment of SCCM 2012 R2 and Microsoft Intune

Hi,
I could see that lot of TechNet articles are being updated recently with the information on Samsung Knox.
Tried to check the email profile configurations in the SCCM console, could not find Android platform in the supported platforms.
I could see this option available when I login to the admin portal of Intune. Can any one confirm if the extension for enabling email profile support for Samsung Kiosk devices id released or planned to be released.
Regards
Leela

Configuring email profiles on Andriod devices is not yet supported via ConfigMgr integrated with Intune, see also:
https://technet.microsoft.com/en-us/library/dn554226.aspx
It probably will be in the future, but there are no dates available yet.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Why is Adobe dropping support for pre 3GS phones?!

I think it's a bad decision to drop support for pre 3GS devices. There are still many out there and if support is dropped we're forced to still use the old PFI to reach the complete audience.
It's clear that OpenGL ES 2 offers a lot more fancy stuff than OpenGL ES 1.5 does, but still, things like GPU_VECTOR or sophisticated blending are perfectly doable with OpenGL ES 1.5.
And if a clean implementation is really not possible, Adobe should at least allow to publish for old devices even if this means that not all optimization techniques can be used.
I develop iPhone apps using different technologies and AIR is attractive for me because I can target with one project a big range of different plattforms. If Adobe drops support for old phones, this advantage is heavily shortened!
What is your opinion on the this development?

Apple have dropped support for pre-3GS because to pull of the features and performance in iOS 4.3 they had to develop just for the ARM7 chip, and not for the ARM6. They probably have a good sense of the number of people that have the older devices, and think it's ok to not update the software on those devices.
The same may be true for Adobe.
I am trying to find out how to make AIR 2.6 and AIR 2.0 live together in Flash CS5. If I work it out I'll let you know.

Nokia 5800 - No Support for TV out-mode?

I just recently realised that that is true for my set... That there is no support for TV out-mode... I've tried, audio comes out from my TV speakers but there is no visual. Is there anything at all that I can do to utilise this feature? I have after all been supplied with the wires and all...

The Whole Story As Below, Anyone Can Help?
[THREAD ID:1-3T7CFIN]
SR 1-8296203408
Dear Mr. Xh,
Thank you for emailing Nokia Careline.
In response to your email, your concern has been noted. We know that our supplier is doing everything in their power to remedy the situation. We suggest to check with your dealer if they have a policy regarding exchanges. We do apologize for the inconvenience caused.
You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
Kind regards,
Ana V.
Nokia Careline
Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
-----Original Message-----
From:
Sent: 03/10/2009 11:02:40 PM
To: [email protected]
Subject: Re: Nokia -Nokia 5800 Xpress Music - Tv- Out Inquiry
Dear Nokia Careline,
The "No Return Policy" already be used here. Seem that I have no choice to go for other alternatives. Maybe I have to file the case to our local authority i.e. Tribunal Court Claim to exercise my consumer right here.
Perhaps, further blogs at Nokia discussion column, facebook, twitter might help to let others understand more about so-called Nokia Careline entertain their loyal customer.
If you insist your stand there, then I am always ready to go for my alternatives.
I won't let go unless you could satisfy me.
--- On Thu, 10/1/09, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]>
Subject: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
To:
Date: Thursday, October 1, 2009, 3:39 AM
Reference No.: SR# 1-8296203408
Dear Mr. X,
We appreciate your prompt reply.
We will be noting for concern as a feedback. However, please be informed Mr. Tan that Nokia has noted in the box regarding the said case.
The outage experienced by our sub-supplier was quite unexpected. Typically, the lead time for components such as this one is fairly long, and one cannot react to sudden changes at short notice. We value our relationship with our suppliers and sub-suppliers, and know that our sub-supplier is doing everything in their power to remedy the situation and return to regular supply.
The lack of TV out should not affect any other device functionalities besides that you will not be able to show/transmit pictures or video to external monitor/screen.
As Nokia does not have a replacement policy, we suggest to check with your dealer if they have a policy regarding exchanges.
Apologies for any inconvenience.
You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
Kind regards,
Nicky E.
Nokia Careline
Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
[THREAD ID:1-3T7CFIN]
-----Original Message-----
From:
Sent: 30/09/2009 10:32:05 PM
To: [email protected]
Subject: Re: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
Dear NOKIA CARELINE,
Yap, you can tell me leaflet included & a tiny label on the pack box. But who will really check every single area of the pack box & read the whole manual or leaflet when they decided to buy the phone. What normally customer will check is the handphone and the accessories. Now you are telling me that customer have to check everything even they buy something from a reputable company like Nokia. If I going in a shop that sell a China like Nokia 5800 handphone and I bought it then I won't have a say here at all.
I have checked with my retailer they allow me to return the unit but I can't get full refund from them. They are going deduct a couple of hundred cause they said the unit is considered used unit now. According to them instead of asking customer to wait they prefer to refund the customer. So who is going to bear for the cost now.
I certainly frustrated by getting a unit that without TV out function. If you are telling me that once manufactured the feature could not be added in, then I would say if you do have a unit with TV-out feature now you could exchange directly to your customer. Why still ask your loyal customer like me to refer to dealer or retailer. Is that what you mean after sales service or NOKIA CARELINE. You don't even care in the first place.
Your apologies certainly couldn't be accepted with reason of Nokia did include leaflet to inform and tiny sticker at the bottom of the pack box. Sound irresponsible to me at all.
What I wanna your care now, that is pls exchange a unit with TV-out feature with mine in which without such feature. Do I really put the CARELINE into difficulty position. Your reply to me is highly appreciated and also to show that you care or don't care.
Regards,
XX
--- On Wed, 9/30/09, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]>
Subject: Nokia - Nokia 5800 Xpress Music - Tv- Out Inquiry
To:
Date: Wednesday, September 30, 2009, 5:14 AM
Reference No.: SR# 1-8296203408
Dear Mr. X,
Thank you for emailing Nokia Careline.
Greetings!
In response to your inquiry, please be informed Mr. Tan that due to a component shortage, a limited number of Nokia 5800 Xpress Music has been manufactured without the TV-out functionality. It is possible that you have one of these devices. In that case, the sales package should have a sticker on the package and a leaflet inside the package that inform about the lack of TV-out functionality. Also, the TV-out cable has been removed from the affected sales packages.
Kindly take note Mr. Tan that it is not possible to add the feature after the device has been manufactured. Therefore we have labeled the affected sales packages with a sticker and included a leflet that inform about the lack of TV-out functionality. Those individuals who wish to have the TV-out functionality should wait for a sales package that that has it again.
The new batch of phones should have the feature back. As this matter is clearly stated in the sales package, it is not possible to return to Nokia. However, you may check with your dealer if they have a policy regarding the return of the unit in exchange for a version that has the TV-out feature. Those individuals who wish to have the TV-out functionality should wait for a sales package that that has it again.
Apologies for any inconvenience.
You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
Kind regards,
Nicky E.
Nokia Careline
Do you know you can now update your phone software at your own convenience? Visit www.nokia.com.my/support to check if your phone model is supported and download the "Nokia Software Updater".
[THREAD ID:1-3T7CFIN]
-----Original Message-----
From:
Sent: 30/09/2009 09:04:38 AM
To: [email protected]
Subject: WebForm Automated Email
[Message:I bought a unit of Nokia 5800 last week for my wife. I discovered that the unit I bought is without TV support because when I tried to connect the TV cable that I bought. I tried to check the manual & pack box then only noticed a small label on the pack box stated no TV out supported. The retailer informed me that they only aware about this when I complained to them. I checked the discussion blogs, some stated because of worldwide component shortage so such function being omitted. I can't accept such explanation because I feel like I was being cheated by Nokia. Am I buying a pirated product now. Oh come on, how could Nokia so irresponsible to deliver the product with imcomplete function since TV out in general or ealier batch was included. Could you imagine if next time the product is delivered without GPS function, camera support, wifi & etc. by giving excuses of worldwide component shortage. What's the different buying a China Imitaion Product
now. I certainly wanna to return my unit if such function was omitted. Please reply your loyal customer ASAP.]

Issue getting Motorola 9060G scanner to work with 5508 WPA-TKIP

All,
We have a new 5508 controller that we are trying to get setup to use our Motorola 9060G handheld scanners. This device uses WPA-TKIP and has been working with a Symbol controller without issue. I need to retire this controller so started re-creating the SSID on the Cisco controller. I am having issues getting the scanner to connect with the new SSID. It looks like everything works fine with no security but once I start to enable WPA+WAP2 I get no connectivity. Laptops work fine just not the handheld. I have tried every combination I can think of for AES and TKIP under the WPA and WPA2 policies. I have also gone through the Cisco Best Practices guide for Motorola/Symbol Wireless Handheld Scanners and so far unless I have no security I cannot get things to work properly. I tried doing a debug client to see what or how the two are talking but I can only get results with security set to open. Just looking for other suggestions as to something that I might be missing. My controller is running 7.6.100
Thanks ...
Brent Berry

We have a new 5508 controller that we are trying to get setup to use our Motorola 9060G handheld scanners. This device uses WPA-TKIP and has been working with a Symbol controller without issue. I need to retire this controller so started re-creating the SSID on the Cisco controller.
Just be aware that the Wi-Fi Alliance has scheduled the "elimination" of TKIP. What you are about to do is a "temporary" solution. You can get the scanner to work now because you are using WLC firmwares that still support TKIP. However, if (in the future) you need to upgrade your controller's firmware to support newer wireless access points, your scanners may not work any more.
Read HERE.

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

[SOLVED For Lack of Device/Driver Support]USB webcam

When I connect my web cam to the computer, /var/log/everything.log gives me this :
Apr 22 17:44:41 arch kernel: usb 1-1: new full speed USB device using uhci_hcd and address 4
Apr 22 17:44:41 arch kernel: usb 1-1: configuration #1 chosen from 1 choice
Apr 22 17:44:42 arch load-modules.sh: 'usb:v041Ep4055d0102dc00dsc00dp00icFFiscFFipFF' is not a valid module or alias name
How do I find out which module is it trying to load?
My webcam : Creative Labs Inc.
Model number: VF0230
This is how it looks in case anyone was wondering
I have tried the ov51x-jpeg drivers and the linux-uvc drivers, but they both didn't work. Maybe I am missing something.
Here's my lspci and lsusb with the camera connected
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801BAM IDE U100 Controller (rev 03)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2)
02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
02:06.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus [Cyclone] (rev 10)
02:06.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 10)
02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller
Bus 002 Device 004: ID 041e:4055 Creative Technology, Ltd
Bus 001 Device 003: ID 04b3:310b IBM Corp. Red Wheel Mouse
Bus 001 Device 002: ID 0409:005a NEC Corp.
Bus 001 Device 001: ID 1d6b:0001
Last edited by Inxsible (2009-04-28 18:57:02)

I don't think that model has support, but that is just based on a few minutes of googling.
This thread:
http://ubuntuforums.org/archive/index.php/t-607309.html
discusses that particular webcam, and points to a sourceforge project that may implement support for your chipset at some point, but that was a few years ago and the project is dead.
UVC lists similar chipsets (in that they are one or two numbers off) but not your exact one.
For example, 041e:4057 is supported, but yours (041e:4055) is not listed. You could try UVC, but I am not sure it would work. If it were me, I would give UVC a shot and hope they simply overlooked your particular camera when making the compatibility list.
You could also look here
http://mxhaard.free.fr/spca5xx.html
and see if you can get the spca5xx module to work. I saw a note somewhere that a similar camera to yours was working under it, but once again, a different chipset.
If all else fails, look at the cams listed on these pages and try to get one of those!
Good Luck
JTS

Itunes update wont install --error is "run prescript for apple mobile device support"

I am running 10.5.8 and trying to update Itunes to 10.6. It hangs on the install and says "run prescript for apple mobile device support"....I've tried numerous times and it always reverts to this message. Ideas?

Sidenote--Itunes compatibility is my curent version of OS. I have an IPAD 3 that wont sync because of old verison of itunes

HAL mounts USB flash devices without support for non-latin characters

Hey folks!
How can I make HAL mount USB flash devices with support for German characters such as ä, ö, ü, ß, etc? At the moment there's only a silly question mark instead: http://www12.file-upload.net/20.08.08/3cpcpx.png .
Can anyone help me?
Thanks.
Henrik

I think it's a bug in KDE4, because no other window manager or desktop environment has such problems. I had it as well, when I used KDE4.0.* for testing and seems like this remained. Do you have a completely german KDE4? Check the system settings!
A thing comes to my mind, did you check it with konqueror? I guess this bug appears in dolphin, richtig? I schätz mal schon Try it with konqueror, if it doesn't appear there, it's a dolphin thing

Mobile Operating systems and Devices support for Dashboards 4.0

HI ,
Need Help on Mobile Operating systems and Devices support for Dashboards 4.0 from sp5 or higher.
According to below link ,some of the mobile devices are not supported.
Steps to view SAP BO Dashboards (Xcelsius) on Ipad
Note: Dashboards are currently not supported on IPhone devices even with latest version of mobile app.
Note: Dashboard Support to Android(Only Tab not Android phone) is available from SAP BO 4.1
Checked the PAM but ,couldn't get the info regarding devices.
Need Help!!!!!
Regards
Sushma

Hi Sushma,
Please check the below link & let me know for any assistance.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10e77da7-14a8-3010-6d98-e4aea55e7e56?QuickLink=index&…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0134dbb-8f10-3010-5084-cf90dbb35284?QuickLink=index&…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
Dashboards on Mobile/ IPAD
--SumanT

Are any alternate input devices supported for turning pages?

I am working on iBooks versions of my print music books and am disappointed to see a lack of support for external devices to change pages. It seems with all the sheet music apps out there that support foot pedals that iBooks would add support for this - if not for music, at least for people with disabilities. I would not really look forward to building my books as one-off applications just to support this kind of feature as I really like iBooks Author and the resulting ebooks are great.
Is anyone aware of a way to get iBooks to accept input other than touching the screen for turning pages? Does anyone know if Apple is looking into enabling this kind of feature in iBooks?

It's an interesting question, but Apple's platform is predicated on touch....and now voice, with SIRI.
If you wanted it enough, you'd go for an app (I think what you want would be near trivial there - you're just talking about a teleprompter, after all), so it seems more like you simply have a yearn, in which case you may need to be (very) patient if you insist on relying on iBA, as it just came out of the box, so to speak.
I think we can look forward to eye-motion detection as one example....but for now, the page turn interaction as it exists, seems to be more indicative of a 'book' and Apple seems happy to stick to that path - for now.
Keep in mind that WWDC 2012 is coming up - as developers, we're all waiting to see what Apple let's us work with next.
Apple doesn't discuss future plans, but as always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

EA6500 support for Wi-Fi devices on WPA (TKIP)

Similar Messages

Maybe you are looking for