EA6700 bridge mode does not work - error 2218

I've just bought WiFi router EA6700-EE and now trying to configure it.
After connecting to Internet I upgraded its firmware to the latest version.
I want it to be just a bridge but when I select this option and press OK I get a message (translated from Russian):
"Unexpected error 2218
An unexpected error occurred. If this problem persists, please visit our web site technical support.
Details
/jnap/ui/SetRemoteSetting"
Is it possible to fix it?

What Hardware version is your router?
What Firmware version is currently loaded?
What region are you located?
Was a Factory Reset performed before and after any firmware updates then set up from scratch?
I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
PC Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the Admin account on the router.
Try this as a test and see if cascading method works:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=169333b784cf4c78b8db5490f85c518a_Setting_.xml&pid=...
morales2k wrote:
I am also having this issue (with the exact same error details), the ip is indeed ipv4.
My current setup is that this router is connected to another router.
The router giving out the error was previously set up to use automatic dhcp, but then it had dhcp disabled on another screen, instead of setting it up in bridge mode in the first place.
I went in and tried to set it up in bridge mode, but then it gave out this error.

Similar Messages

I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck.

In the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

in the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

Also, I probably should have added that I am with Vodafone, and I'm currently using the Blackberry Curve 3G (9300) on the version 5 software. I also have no access to the Internet, which is telling me I have no signal. I have full 3G signal, so there is no issue whatsoever with my signal. I don't use the BBM on the phone, so I'm not sure if the issue is affecting that also, but I assume it would.

Clamshell mode does not work with Mountain Lion.

Installed Mountain Lion on 11" MacBook Air last Friday night. Now system does not appear to work in Clamshell mode, as it won't wake or connect to external monitor.

Apple Tech Support was very helpful. The MBA works in clamshell mode next to my monitor now -- but does not work in the Henge Dock. Henge Dock has been contacted.

Digital ICE epson scan (professional mode) does not work

Hello,
I am running the latest Mountian Lion OS on my IMAC and have recently started running some test scans with my Epson Perfection V700 scanner. The supplied Epson software , Epson Scan offers a variety of operating modes, "professional mode" offering the most features. Professional mode offers Digital ICE as an option, however when selected, the Digital ICE does not work.I have compared scans with and without digital ICE and they are exactly the same. Scratches and dirt are not removed by the scan.
If I select a more basic mode ("Home Mode") Digital ICE does work. But this other mode does not offer the range of options offered in porfessional mode.
Has anyone out there used Epson Scan software? Has anyone else experienced this problem? Is there other scanning software out there which could fully exploit the features of the Epson scanner I have? I tried Vuescn and it does not seem to be compatible with my scanner, so that is off the table.
Dean

You should first read the user manual that came w/your scanner and/or contact Epson tech support.
How is the scanner connected to your iMac? USB cable? Wireless? Firewire?
Has anyone out there used Epson Scan software?
I have an Epson scanner. It only work when it's connected directly to my iMac via USB cable.
Has anyone else experienced this problem?
Initially.
Is there other scanning software out there which could fully exploit the features of the Epson scanner I have?
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print/scan
Sometimes, installing the GIMP drivers help with printing/scanning issues: http://gimp-print.sourceforge.net/MacOSX.php

Antares autotune 4 graphic mode does not work in Logic

Has anyone found a workaround for the following issue:
Using Antares autotune 4 or 5 in Logic pro 8, I cannot use the graphical mode how it was intended. Using Cubase, I was able to launch the plugin, switch to graphic mode, and track the pitch vs time. This was useful to manually correct the pitch for each syllable. For some reason, this function does not work in Logic Pro 8. Any thoughts as to why? Am I doing something wrong? Please advise.

I haven't used AT in years, but I do still have AT 4.
Graphic mode works just fine here in Logic 8, and I'm still on Tiger as well, albeit 10.4.11
Not that you asked, but seriously, look into Melodyne. AT is so archaic as far as it's graphic mode is concerned. 30 seconds back with it and I can't seriously see why anyone would use that plug-in, other than maybe manual mode, for a quick "run a comb through it" fix.
Sorry I couldn't give you an answer as to why this is happening. have you contacted Antares?

Using TImed Access mode on Airport Extreme with other routers in bridge mode. Not working as expected.

I am trying to setup timed access mode on my airport extreme in order to limit the times devices can connect to my network, but I am having some trouble.
My setup is as follows Cable Modem ---> Airport Extreme ---> Netgear router
The Airport is running DHCP and the Netgear is in bridge mode. The only purpose of the Netgear is to provide a wireless access point for older b/g wifi devices. The Netgear is connected to the Airport by an ethernet cable from one of its LAN ports. All ip addresses are supplied by the Airport.
When I list a device mac number in the Airport extreme's timed access table it does seem to block the device if the device trys to connect to the airport's wireless service, but the device is still able to obtain service through the Netgear wireless service. I want the device to be blocked on both wireless networks. I thought this would work since all DHCP is on the airport. Why is the Airport allowing the device to connect when it comes in through the Netgear?
In this example the device I am trying to block is 5c:59:48:ba:28:d2.
Looking at the log on the airport I see the following entry when the device (when permitted) connects to the airport wireless
Nov 30 22:43:12
Severity:5
Associated with station 5c:59:48:ba:28:d2
If instead the device connects to the Netgear wireless I see the following log entry on the airport (this connection gets through even if the mac address above is listed as blocked on the airport)
Dec 01 10:46:29
Severity:5
Connection accepted from [fe80::223:12ff:fe29:acfe%bridge0]:54774.
It appears that the Netgear router (while bridging the network) is somehow modifying the mac address format in a way that the airport does not recognise it as the device to block.
What can I do to fix this?
Thanks.

The Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

Upgrade from Bootcamp 3.0 to 3.1 does not work - error 2229

Hi,
I´m running Snow Leopard and Win7 on my MBP 2008, each at 250GB HDD space. I installed both together. Before, I had Win Vista and Mac OSX Tiger installed and hardware worked in both OS´s. But I had to exchange my HDD and install everything from scratch. Ever since, I can´t use right click on Trackpad or Bluetooth properly in Win 7. In Snow Leopard, everything works fine.
I found out a couple of different ways trying to fix this, but nothing worked. Now I found the hint to install this here http://trackpad.powerplan7.com/ but this requires the previous installation of Bootcamp 3.1. Problem is that I have Bootcamp 3.0 installed (with bugs, as said before - meaning trackpad etc. is not working properly).
Anything I try fails - I can´t install single drivers from Bootcamp CD (it says it worked, but nothing happens), I can´t upgrade to Bootcamp 3.1 (still the error "2229")...
So I´m lost at the moment and try to always have an external mouse with me, that´s USB connected.
Does anyone here know better ?
Thx,
Simon

I dontknow if this will help you or not, ut back when the BootCamp v3.1 update came out, there were a number of people who could not get it to install. For many of them it was that they had a third-party software installed which added a display-adapter to their system (LogMeIn, etc.) If you have anything like that installed, try un-installing it first, then reboot, and try the bootcamp install. If that works, then you can easily re-install the other software again (although you may need to uninstall it again fr the next bootcamp update).

In printing a document my preview mode does not work??

in printing a mail recieved message my preview mode sends a message stating Preview is not supported???

I have paid the full extended version, but it is not working. See my screenshots.

Bridge CC does not work it did work before

I have Bridge on my machine (Mac) it worked, then I got a message suggesting to purge the cache that did not work so I uninstalled the Bridge CC and reinstalled no different I have to force quit to stop Bridge.

I uninstalled the Bridge CC and reinstalled no different
That is normal because a simple reinstall never solves problems due to a lot of files that stay put on your system without any changes. Quit Bridge, find your user library (by default hidden, use option with menu Go in Finder) and inhere go to the folder Caches/ Adobe/ BridgeCC and inhere you find a folder called caches and a plugin. Delete both files manual to the trash, Restart Bridge and let it takes it time to cache the files again (your central cache has been corrupted or grown to large or both) because your new cache folder is empty and needs to be filled again.

Upgrade of PS CC and Bridge CC does not work

For both I get the same message :
When I click Retry (Réessyer) the same message appears again.
When I clidk on Infos, I get the following message :
Which means error of downloading.
Apparently the download does not start anew.
Reynold Jaquet

Reynold Jaquet please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve download error 49.

Powersave mode does not work

Hi,
This is my first post. I have a new HP Laserjet CP2025dn. The printer is connected to a home network via an ethernet cable (the printer has a built-in connector for this). It is not connected wireless.
The powersave mode kicks in intermittently. The printer should go into powersave 15 minutes after it's been idle, as long as I do not print to it or touch the control panel. But when it goes into powersave mode, it comes out of it by itself into the "ready" mode, without any print job having been sent to it or anyone physically touching the printer. It later goes into powersave mode, but the time it takes to do this varies. I have tried installing the latest firmware but it makes no difference.
Now if I disconnect the network cable, it works properly, that is that it will go into powersave by itself and stay there (since I cannot send any print jobs to it with the cable disconnected). So I must assume that some network activity is causing the printer to come out of powersave mode, but I would assume the printer is designed to do this only when a print job is sent to it, regardless of any network traffic or PCs on the network turning on or off.
Is this printer behaving as it should? If not, is there a solution? HP tech support seems at a loss to fix this.
Thanks.

hello its not firmware 9.42 causing....
Powersaver - Automaticaly KeyPad will Off by seconds
Sleepmode - it will be Stand by ---> you see its normal to see your wallpaper/screensaver when the screen light was off but in your screen its Stand by and nothing else ....
Also Tip...
Try to on your Automatic Keypad Lock Standby its a Combination of SLEEPMODE of your Phone
You can set the timer of Keypad
menu-->Setting-->Phone-->Automatic keyguard
and try to update your firmware ver9.42 into new ver10.10
i change my firmware 9.42 into 10.10 it will be fix your fullscreen als.
Message Edited by neverwinter on 08-Jun-2009 11:37 AM
Message Edited by neverwinter on 08-Jun-2009 11:38 AM
My Phones
Nokia 3210,3310,8250,2610
Nokia (ExpressMusic) 3250,5310
Nokia (Nseries) N70 N73
[IMG]http://i121.photobucket.com/albums/o220/holodeck3/untitled-3.jpg[/IMG]

Ever since updating my LG G2 to VS98026A the Quiet mode does not work properly and is not controllable.

My LG G2 started to have problems since the latest system update. Previously, the phone worked perfectly!
I now cannot control the Quiet mode settings and the vibrate and silent modes are no longer selectable. This is not acceptable. I have no way of silencing the phone if I need to.
Is there a way to return the phone to the previous state?

http://www.verizonwireless.com/support/knowledge-base-87344/
No can't go back but if you reset you g2 make sure you use cloud storage ahead of time on WiFi to backup data or connect to a computer and know your Google account. If on more everything plan you can use the free 25gb of vcloud storage

My iphone 4 is disabled for 22 million minutes and the recovery mode does not work? How can I fix this?

I have tried to do the standard recovery mode where you hold down the home button and plug in the USB but Itunes is not recoginizing the phone. How can I fix this issue?

Hello there, Itraziel.
Thanks for providing further clarification on your issue. The following Knowledge Base articles offer up some assistance depending on which Operating System your computer is running:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
If you are still unable to restore the iPhone, this article may provide some more information:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.
Thanks again for reaching out to Apple Support Communities.
-Pedro

Bridge browser does not work to browse intranet sites

I can browser our company intranet sites with my blackberry phone but unable to browse the same sites via the blackberry bridge on my playbook.. Can surf other external sites but unable to surf our intranet sites via the bridge browser.
Am I missing a setting? Or is this feature not supported yet?

According to KB26548, it should be able to connect to the intranet sites via the bridge browser. If it's not, I would suggest checking with your IT department to see if they have any suggestions.
I hope that info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

EA6700 bridge mode does not work - error 2218

Similar Messages

Maybe you are looking for