EA6900 Bridge mode setup - not getting proper DNS addresse

I have an EA6900 that I am trying to use just as an access point (have an existing sonicwall as my internet connection / router device)
Here are the steps I have completed
I have logged in to the modem, and created a modem password - can log into modem wirelessly with modem password
I went into the connectivity settings and selec ted bridge mode - with auto IPv4 settings
I get the right IP address segment on my laptop, but the DNS addresses are not from my network (not even the settings from my sonicwall)
I then set the IPv4 settings manually, and enterred a static IPv4 address, as well as the gateway (as my sonicwall), and the DNS addresses of 2 of my servers as well as an external DNS server address
When I connect to the EA6900 with a laptop, I still do not get the DNS addresses I have enterred in the fields on the EA6900 connectivity setup screen
I even tried to enter my server as a gateway - not the sonicwall, and that does not work either (laptop gets the same DNS server addresses)
Any way to do this?
Briudge mode, Get DHCP from my server (works), get DNS server addresses as are enterred in connectivity settings (not working)

salasidis wrote:
I have an EA6900 that I am trying to use just as an access point (have an existing sonicwall as my internet connection / router device)
Here are the steps I have completed
I have logged in to the modem, and created a modem password - can log into modem wirelessly with modem password
I went into the connectivity settings and selec ted bridge mode - with auto IPv4 settings
I get the right IP address segment on my laptop, but the DNS addresses are not from my network (not even the settings from my sonicwall)
I then set the IPv4 settings manually, and enterred a static IPv4 address, as well as the gateway (as my sonicwall), and the DNS addresses of 2 of my servers as well as an external DNS server address
When I connect to the EA6900 with a laptop, I still do not get the DNS addresses I have enterred in the fields on the EA6900 connectivity setup screen
I even tried to enter my server as a gateway - not the sonicwall, and that does not work either (laptop gets the same DNS server addresses)
Any way to do this?
Briudge mode, Get DHCP from my server (works), get DNS server addresses as are enterred in connectivity settings (not working)
"I have logged in to the modem, and created a modem password - can log into modem wirelessly with modem password" Modem? or do you mean the Router? Modem and router are two different things.
That DNS are you seeing on the devices?

Similar Messages

IPhone connects to network but do not get router,DNS address

I can connect to wireless networks no problem, however DHCP does not work properly at all. I get a an IP address and netmask address but this does not correspond to computers already on the network and I cannot connect to the internet.
i do not receive any DNS or router address on any network (checked a friends iPhone and they have the same problem).
Only if I go to static and manually enter a correct ip address, netmask,router and DNS can i actually surf the web!
I cant see any settings to tweak or change to fix this. anyone else experiencing this or know of a fix?

Works for us using pptp-vpn by propagation the nameserver through radius.

HT4910 i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

You can't view your back up files at icloud.com.
You can't view your camera roll and you can't view your Photo Stream files at icloud.com.
The icloud back up plan allows you to "restore" your iOS device from the files you backed up at icloud.com.

Not getting proper payment advice

Hi,
When we are runing F110, we are not getting proper payment advice.
Vendor getting information on payment advice total of amount paid no invoice details are printing, if vendor having less than 4 line items in payment run.
If vendor having more than 4 line items in payment run vendor getting correct details.
In this every time we have to inform vendor what invoices paid if vendor having less than 4 invoices.
Can anyone help us to resolve this and get correct details of payment advice.
Thanks,
Sridhar

Hello Sridhar,
Please check the Payment Advice output control settings for the particular Payment Method and Company Code in FBZP.
I assume that your current configuration reflects "Payment Advice after 4 lines"...which needs to be de-activated and change the setting to "Always Pyt Adv."
Reward if this resolves your problem.
With Regards
Vijay Gajavalli

Lost newly purchased Iphone5, Reported complain in police station but not getting proper responce. Can apple help me out for this?

Lost newly purchased Iphone5, Reported complain in police station but not getting proper responce. Can apple help me out for this?

Oh, don't worry. I know exactly. I'm a retired law enforcement officer after 30 years. I didn't mean for them to allow you to use the Internet, I meant for them to assign an officer to try and track the device for the victim. Again, that would require the victim to provide their Apple ID and password, which most would not want to provide.
Pinging the phone as you mention is only when there is probable cause and that is done through the carrier.
I'm glad to see someone also understand that a stolen cell phone is not as important to law enforcement as it is to the victim. It is unfortunate as smartphones get more expensive. Hopefully as iOS 7 makes it debut later this year, the work Apple has done will have some impact on smartphone theft. Other manufactures and carriers are starting to improve here in the states. It never was something carriers worryed about with blacklisting. This is where they were a step ahead in Europe.

HT5484 Hi, I am using "Avenir Heavy" font in my iOS 6 app but when I run it on iOS5 the label on which I am placing Avenir fonts changes lot and I am not getting proper look n feel. How can I solve this issue ?

Hi, I am using "Avenir Heavy" font in my iOS 6 app but when I run it on iOS5 the label on which I am placing Avenir fonts changes lot and I am not getting proper look n feel. How can I solve this issue ?

Post your question on the Developer forums: http://devforums.apple..com

I am not getting proper guidelines from apple regarding the querry

I am not getting proper guidelines from apple regarding the querry, really iPhone is headache for me as I am unable to use the same from last 10 days

If you would like help from here, you'll have to say what the problem is. "Unable to use" and "not getting proper guidelines... regarding the query" tells nothing about your problem other than your phone isn't working.
Also, judging by your other post where you are looking for an alternative to the iPhone, do you want a non-Apple phone or do you want your problem fixed. No sense having people waste their time helping you fix this one if are going to get another phone.

I'm not getting proper output as per the Program

Hi Experts,
         As i'm executing my ALV report regarding Customer Invoice on Production client I'm not getting proper output as per the program but when i execute the same report on Development client i'm getting proper output.
      Can anybody tell me how can i resolve this problem on production client?
      Actually i've updated my report on my old report but still i'm getting old output of my report on production client, Program is showing updated code but at execution i'm getting old output.

FORM Z_CREATE_FIELD_CATALOG.
I_FCAT-FIELDNAME = 'BUKRS'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '00006'.
I_FCAT-SELTEXT_L = 'Comp.Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'BELNR'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Document No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'KUNNR'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Customer Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'NAME'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Customer Name'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'GJAHR'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000005'.
I_FCAT-SELTEXT_L = 'Fscl.Yr'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'KOSTL'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000008'.
I_FCAT-SELTEXT_L = 'Cost Center'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'XBLNR'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000016'.
I_FCAT-SELTEXT_L = 'Invoice No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
   I_FCAT-FIELDNAME = 'SGTXT'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Item Text'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'BUDAT'.
I_FCAT-OUTPUTLEN = '000015'.
I_FCAT-SELTEXT_L = 'Posting Date'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'MWSKZ'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '0000010'.
I_FCAT-SELTEXT_L = 'Tax Code'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'TAXTXT'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '0000015'.
I_FCAT-SELTEXT_L = 'Tax Description'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'G/L Account'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Net Amount'.
   I_FCAT-cfieldname    = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT2'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Tax G/L No.'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR2'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Tax Amount'.
   I_FCAT-cfieldname    = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'HKONT1'.
I_FCAT-HOTSPOT   = 'X'.
I_FCAT-OUTPUTLEN = '000013'.
I_FCAT-SELTEXT_L = 'Freight G/L No'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'WRBTR1'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Freight Amount'.
   I_FCAT-cfieldname    = 'PSWSL'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'GROSS'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-SELTEXT_L = 'Gross Amount'.
I_FCAT-DO_SUM = 'X'.
   I_FCAT-cfieldname    = 'PSWSL'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
I_FCAT-FIELDNAME = 'PSWSL'.
I_FCAT-OUTPUTLEN = '000018'.
I_FCAT-OUTPUTLEN = '000004'.
I_FCAT-SELTEXT_L = 'Curr.'.
I_FCAT-DO_SUM = 'X'.
I_FCAT-FIX_COLUMN = 'X'.
APPEND I_FCAT.
CLEAR I_FCAT.
LS_SORT-UP = 'X'.
LS_SORT-FIELDNAME = 'BELNR'.
    APPEND LS_SORT TO I_SORT.
    CLEAR LS_SORT.
LAYOUT-ZEBRA = 'X'.
ENDFORM.

OS X 10.6.7 not getting reserved DHCP address from router.

I have a MacBook Pro running OS X 10.6.7
My router is NetGear WGT624v3. I have the router setup to assign out reserved DHCP address for my Macs.
I am not getting the reserved address, but rather "any" address in the pool.
Other types of devices are getting the reserved address. For example, old windows computers, and my Android phone. Only the Mac computers seem to be getting the incorrect addresses.
Any ideas please?
Duane

As long as it shows up in the Windows Boot Camp control panel I'd say fine, happened to a lot of people - I have not had Windows 7 show in Mac Startup Disk control panel for years in my Mac Pro.

Using TImed Access mode on Airport Extreme with other routers in bridge mode. Not working as expected.

I am trying to setup timed access mode on my airport extreme in order to limit the times devices can connect to my network, but I am having some trouble.
My setup is as follows Cable Modem ---> Airport Extreme ---> Netgear router
The Airport is running DHCP and the Netgear is in bridge mode. The only purpose of the Netgear is to provide a wireless access point for older b/g wifi devices. The Netgear is connected to the Airport by an ethernet cable from one of its LAN ports. All ip addresses are supplied by the Airport.
When I list a device mac number in the Airport extreme's timed access table it does seem to block the device if the device trys to connect to the airport's wireless service, but the device is still able to obtain service through the Netgear wireless service. I want the device to be blocked on both wireless networks. I thought this would work since all DHCP is on the airport. Why is the Airport allowing the device to connect when it comes in through the Netgear?
In this example the device I am trying to block is 5c:59:48:ba:28:d2.
Looking at the log on the airport I see the following entry when the device (when permitted) connects to the airport wireless
Nov 30 22:43:12
Severity:5
Associated with station 5c:59:48:ba:28:d2
If instead the device connects to the Netgear wireless I see the following log entry on the airport (this connection gets through even if the mac address above is listed as blocked on the airport)
Dec 01 10:46:29
Severity:5
Connection accepted from [fe80::223:12ff:fe29:acfe%bridge0]:54774.
It appears that the Netgear router (while bridging the network) is somehow modifying the mac address format in a way that the airport does not recognise it as the device to block.
What can I do to fix this?
Thanks.

The Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

EA6700 bridge mode does not work - error 2218

I've just bought WiFi router EA6700-EE and now trying to configure it.
After connecting to Internet I upgraded its firmware to the latest version.
I want it to be just a bridge but when I select this option and press OK I get a message (translated from Russian):
"Unexpected error 2218
An unexpected error occurred. If this problem persists, please visit our web site technical support.
Details
/jnap/ui/SetRemoteSetting"
Is it possible to fix it?

What Hardware version is your router?
What Firmware version is currently loaded?
What region are you located?
Was a Factory Reset performed before and after any firmware updates then set up from scratch?
I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
PC Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the Admin account on the router.
Try this as a test and see if cascading method works:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=169333b784cf4c78b8db5490f85c518a_Setting_.xml&pid=...
morales2k wrote:
I am also having this issue (with the exact same error details), the ip is indeed ipv4.
My current setup is that this router is connected to another router.
The router giving out the error was previously set up to use automatic dhcp, but then it had dhcp disabled on another screen, instead of setting it up in bridge mode in the first place.
I went in and tried to set it up in bridge mode, but then it gave out this error.

Bridge Mode - Could not join 'network '. A timeout error occurred

Have my airport express in bridge mode with a home hub 3 (that has its wireless network disabled). When i go to join the new wireless network i created on the airport express , it gives me the error in my title.
What causes the timeout and how can it be fixed?

As I read the network you should be extend wireless network.. not join. And you need to setup the Express to allow it to be extended.. at least on v5 utility.. on v6 it could work automagically.

Airport extreme in bridge mode or not?

Hello
I have an Thomson TG789vn non-apple router and a AirPort Extreme. The Thomson-router is connected to the Airport Extreme with a ethernet-cabel and the thomson is set in DHCP/NAT and the Airport Extreme is set in bridge mode.
Is this the best setup for my Airport Extreme, or is it better to set the non-apple router in bridge mode and the Airport Extreme in DHCP/NAT-mode?
Regards
Morten Joki Haukeberg

I think if you are using Back To My Mac you need your A.E. in DHCP/NAT-mode
That is correct.
Also, if you want to create a guest network, i think the A.E needs to be in DHCP/NAT-mode.
That is also correct.
Its just a bit tricky to set the non-apple router in brigde mode, thats why I would like to know first,
Is is usually more than a bit tricky to try to completely reconfigure a modem/router or gateway to act as a simple modem. Sometimes, it is not possible, other times very difficult to easy. It all depends on the device.
In most cases, it would be much, much simpler.....if you want to run the AirPort in DHCP and NAT mode, to use a simple bridge mode modem.....rather than try to reconfigure a modem/router.
If possible, ask your service provider if they might be able to furnish you with a simple, bridge mode modem.....if you want to use the AirPort as the main router providing DHCP and NAT functions for the network.

EA6900 Bridge Mode

Trying to put the EA6900 into bridge mode and loose wireless broadcast. Plus, once in bridge mode can no longer access the router. The EA6900 workds fine if you don't use bridge mode and just deselect assign DHCP server and plug into the LAN port. Anyone else having issues with the bridge mode?
Solved!
Go to Solution.

It sounds like the same bug that affects the EA4500 and EA3500. Read the thread/link below to manually configure bridge mode.
http://community.linksys.com/t5/Wireless-Routers/EA3500-router-in-bridge-mode/m-p/669972#M260021

Extreme running in bridge mode, can't get out past router or firewall

Hello
I have my Laptop, Mini and an older PC connected to my wireless network via my new airport extreme. I had teh system connected and got the solid green light but no internet. After putting the extreme into bridge mode everything works fine. The problem I have now is that I can't activate my web cam it says that i am blocked behind a firewall or router. I have been told that to get out from behind the router of firewall I need to be out of the bridge mode, but when I try this I loose my internet connection??? Anybody have a suggestion???

Warnercj7, Welcome to the discussion area!
I guess the AirPort Extreme base station (AEBS) is connected to a modem of some type. It appears that the modem is operating as a router.
You will need to configure the modem/router so that the appropriate ports are forwarded through the modem/router to the web cam.

EA6900 Bridge mode setup - not getting proper DNS addresse

Similar Messages

Maybe you are looking for