EA6900 Device List - Update cycle time frame?

I have owned EA6900 router for 2 weeks. Works great. Using the device list feature to see which devices are online and which are not.
See devices that are no longer on my network as "online". How can this be?
When does the router ping the network for real-time device status?
I am using the Device Monitr app and it just mimics what the firmware shows.
How do I make the device list real-time or re-ping every 15 minutes at a minimum?
Thanks

What I discovered is that the Linksys Smart WiFi page is getting some time to refresh the device list.There is nothing on the page also that we can change to refresh it. However, this will not affect your internet connection. What we can try is to reboot the router on the Linksys Smart WiFi page or just manually do it.

Similar Messages

Mobile Device List updates

Hi
With all the Heartbleed troubles of lately, we're trying to block Android devices which are still vulnerable using the Active Sync Device Acces rules in Exchange 2010.
However, the list of devices (family, type) seems incomplete. With new devices being released almost weekly these days, I was wondering how this list is kept up to date ? Is there a procedure to get more/newer devices in this list to choose from ? Or does
it get updated in the regular Roll-up or SP's for Exchange 2010.
Greetings
Richard

You will need to run the script to get the list of all ActiveSync Device and from thee you can figure out the new devices.
check this out
http://port25guy.com/2013/03/25/how-to-get-a-report-of-active-sync-devices-in-exchange-2010exchange-2013/
Where Technology Meets Talent

Linksys EA6500 Device List Connection Status - update process

I have the Linksys EA6500 with the latest firmware and have a question regarding the device list connection status.
Currently, I am seeing devices in the list that have a connection status of live, but they are not even within my home network.
What is the update/cycle time for the device list actually checking connection status of a device?
In my situation, it has been 3 days (72 hours) since the two device showing as connected have not been connected to my home network/router.
Noticed that this inaccurate connection status for these devices is also contributing to the Device Monitr app not showing correct device connection status info.
Would like to have real-time device connection status if possible. This device list is great way to know when device get connected or disconnected which helps me know when my kids get home from school or using game console when should be doing homework.
Thanks for your help.
Solved!
Go to Solution.

When you go to Troubleshooting > Diagnostics > Router configuration and clicked on Backup it is actually letting you save a backup of your configuration. It should prompt you where to save the file for you to use it later to reconfigure the router settings by loading it back on the router itself. I suggest that you do a hard reset on the router itself – push and hold the reset button using a pin or paper clip for 10-15 seconds then wait for the cisco light to go solid. Once the cisco light will turn solid access the router page again by typing in 192.168.1.1 in the address bar and load the backup that you have saved. Just go back to Troubleshooting > Diagnostics > Router configuration and click on Restore option. It will ask you to look for the backup config file that you have save and open it and the settings should be restored on the router. Check then if the same problem (device list) will be experienced.

Windows Installer SourceList Update Cycle : How it works?

Windows Installer SourceList Update Cycle : How it works?
Regards, Firoz Ahmad (Cheeeeeerrrrssssss)

Hello,
Windows Installer Source List Update Cycle causes the Product Source Update Manager to complete a full update cycle. When you install an application using Windows Installer, those Windows Installer applications try to return to the path
they were installed from when they need to install new components, repair the application, or update the application. This location is called the Windows Installer source location. Windows Installer Source Location Manager can automatically search Configuration
Manager 2007 distribution points for the source files, even if the application was not originally installed from a distribution point.
Is very nice to use this features. The agent on the local computer will scan the registry. When he found a MSI product code that is define in SCCM, it will update the source for the MSI.
You can find some usefull information here : http://technet.microsoft.com/en-us/library/bb892810.aspx

Finder DEVICES list shows multiple Macintosh HDs

I've come across and interesting Finder bug where the DEVICES list shows multiple Macintosh HDs all linking to the single Macintosh HD on my MacBook:
http://pukupi.com/files/finder_bug.png
At the time I did have an old G4 connected in target mode and was zeroing it's Macintosh HD but this wasn't (and shouldn't be) in the DEVICES list at the time since zeroing was still in progress. Disk Utility doesn't suffer the same bug and shows a correct list of devices.
Relaunching the Finder doesn't fix the problem.

I've seen this error a few times.
THE SOLUTION (believe it or not): Drag the extra drive out of the list.
: )

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

How to update device list in MAX ?

Hi all,
I'm running MAX 4.0.3 and trying to declare cFP module (that I still haven't received).
I'm expecting :
2 RLY 421 modules,
1 AI 111,
1 DO 401,
they'll be connected to a cFP 2020.
The thing is when I try to add a device I have to select from a list but RLY 421 is not in that list..
How can I update MAX's device list ??
Message Edité par TiTou le 07-19-2006 04:21 PM
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
cFP.jpg ‏21 KB

Hello,
I've just installed FieldPoint Driver 5.0 downloaded from NI website but the RLY 421 is still not in the device list ...
Before starting to develop I thought I should update my drivers so I got the latest FP Driver version, but since I'm still using LV 7.1 maybe I shall unistall FP Driver 5.0 and re-install 4.1 and see if it works ?
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Printer shows up multiple times in my device list

I have an EA4500 router running firmware version 2.1.39.145204. A device, which I assume is my HP printer, shows up on my device list multiple times (11). This is illustrated below with the devices status report from the "Troubleshooting" tab of my Smart Wi-Fi interface. The device listed as "Photosmart Premium C309g-m" is indeed my printer. The MAC address listed agrees with the set-up information in my printer and it is correctly listed as connected via wi-fi. There is no hard wire connection from the printer to the network.. As you can see, there is a bunch of other devices listed all with the same name. These devices have the same IP address as my printer but different MAC addresses. My questions are:
1. What causes this situation?
2. How do I fix it? By this I mean, how do I remove the multiple listings?
Thank you in advance for your help.
Name MAC address IPv4 address Connection
PKs-iPad
FC:25:3F:9B:5B:66
192.168.1.118
Wireless
HP0026550FA2B0
DC:E0:00:00:B8:C5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:20
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:10:9F
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:109
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:38:A5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:20:74
192.168.1.128
LAN
Owner-PC
00:23:08:CC:F6:00
192.168.1.130
LAN
PETER-LAPTOP-WiFi
00:1D9:68:F2:E0
192.168.1.122
Wireless
David Cohen’s MacBook Pro
00:23:6C:92:CE:22
192.168.1.104
Wireless
Photosmart Premium C309g-m
00:26:55:0F:A2:B0
192.168.1.128
Wireless
HP0026550FA2B0
DC:E0:00:00:20:AA
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:B4
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:98:81
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:18:A9
192.168.1.128
LAN
Name MAC address IPv6 address Connection

Hi sgtpepperlhcb2! Duplicate MAC and IP addresses in the DHCP list can be an indication of a possible firmware problem. I suggest you upgrade the router's firmware. Reset and reconfigure the router if the firmware upgrade will not work.
Here's an article that may help.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d2d5c9da8e68439883b85a9cf72bf7e5_How_to_upgrade_th...

HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time

my device was updated and now is not working anymore, it is in recovery mode all the time.
what can i do???

Delete the shortcut you have at the moment and then create a new one as follows: 
#Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox. 
#Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)''' 
Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future.

HT201250 Time Machine: The devices listed on the left; are they the backup devices?

Time Machine window: The devices listed on the left; are they the devices that have received the TM backups?

try highlighting one of the drives, click on the timemachine icon in the task bar open preferences iin that drop down menu and see if time machine is turned on.

Incorrect Device List AC1900 EA6900

When I look at my Device List, the list is either incomplete, it lists devices that are off-line and it lists several devices multiple times; quite annoying.
Why is that? Any suggestions?
(I do have a none-linksys extender)

mine does that occasionally too. just hit the x to delete the offline ones. I dont find that map very accurate but usually the ones that show online are truly online.

Loading Reporting data: "time frame" "frequency" "update times"

In a requirements package from which I am to design and build BW reporting, information has been provided on "time frame" "frequency" "update times"
Can you share your thoughts on these and how to consider them during the design/build? Examples will be very helpful. Also, how does time basis fit in here?
For example what is the implication when on a particular requested report, the frequency= "on demand".
If time frame = quarterly what effect will that be on update time?
Which of these speak to when data needs to be loaded into the BW? Which refers to when reports need to be generated? And is there a link between the two?
How is the determination on the frequency and specific time to load data for reporting purposes made?
In general, what influences the decisions on "time frame" "frequency" "update times" during the reuirements gathering phase?

There is not really a set answer for that, basically you have to listen to what your users need, and what you can offer them based on your installed base.
"Time basis" I'm not sure about, could refer to the type of timefield you are using. Transaction date, ...
Let me give you an example
Eg. Users here want there reports on wednesday morning, this is the only time that they will look at the reports.
Frequency: You can get away with loading once a week
Time frame: Because all my users will be in the system as of 5 am, I need to make sure data is ready by then. But I can't load before 1am because that is when FICO data is loading already...
Update times: we could do some updates of new plan version during the rest of the week, since they are relatively small. (although I'm not really sure what they mean with update time, sounds the same like loading frequency)

HT1535 My iphone shows up in the upper right. there is no devices list on the left with the newest version. How can I update playlist? I cant drag and drop where it is appearing

The newest versions do not post a devices list on the left anymore. My iphone appears in the upper right. You can't drag the playlists to the phone. Cannot figure out how I am suppossed to add content to phone from the computer.

I think it's edit - view - show left sidebar.

How I fixed my Apple TV dissappearing from my iTunes Device List

For those looking for a magic cureall you won't find it here.
The long and short of the matter, the problem was on my end. Specifically an element of my ethernet's driver configuration utility wasn't loading properly. So, the AppleTV would show up in my device list and then dissappear after about 5 minutes and the only way to get it to show back up in my itunes device list is to cycle the power on the AppleTV. Unfortunately doing this would cause the same dissappearing AppleTV out of my iTunes device list.
I'm one of those fools that bought that KillerNIC overpriced ethernet card and I had disabled the killernic tray application. As I recall I had some issues with my initial windows install and had to disable it to keep the computer from rebooting constantly. When I fired up msconfig and had teh tray application launch when windows boots up then the AppleTV showed up in my device list and everything was fine and is still fine.
I spent about 2 hours on the phone with Apple tech support, who were as helpful as they could be when the problem was on my end. They even transfered me to one of their product specialists and he had some suggestions, but we soon realized the problem wasn't with the AppleTV, but something on my end.
A few things to try, that the Apple tech reccomended:
-If you are connected with a wired ethernet, then plug the AppleTV directly into your computer (PC or Mac) with the ethernet cables. The ethernet jack on the AppleTV is autonegotiating so you don't need a crossover cable. We tried this on my PC and the AppleTV didn't show up in my device list. But when we tried doing this on my Macbook the AppleTV showed up just fine. Which showed both myself and the Apple tech that all is well with the AppleTV, but something in my configuration was amiss.
Don't waste your time on port mapping or port forwarding or any of that business, since the AppleTV is behind the firewall those sorts of things are not going to affect the AppleTV. Now the tech did say that some routers are flakier then others and a setting change or two might cause the AppleTV to stop working. His suggestion was to save my current setting and reset the router to default settings. Do not revert the firmware to an earlier version, but put the router settings for the current firmware into a default state. I know this is tedious, but if you are as frustrated as I was a few hours ago, then any suggestion to try is helpful.
For the record here is my system and network stuff:
router: Dlink DGL-4300 (V1.8)
ethernet: Bigfoot Networks KillerNIC (v3.1.2.3)
OS: WinXP (but the tech didn't think that the OS was the issue)
I guess the moral of the story is why did it work and what changed to make it stop working? I was 100% convinced that an iTunes update caused teh problem to fail, because heck it was working once and now it doesn't work and I forgot that one bit that made my setup nonstandard (the missing tray application).
Now this might not help anyone but me, but just on the off chance that someone else out there has more money then sense, bought an overpriced ethernet adapter, disabled the tray application, and is now having problems with dissappearing devices. Well, do I have a solution to your problems.
ds

It's not a matter of unpairing it from the iMac. You need to pair your iMacs remote to it and the ATV remote to the ATV. If you don't pair you iMac to it's remote, then the ATV remote will always be able to activate it, even if the ATV's remote is paired to the ATV (and vice versa).
In case you don't know how to pair the remote. Hold the remote aout 3" from the iMac and hold the menu and next buttons down for about 5 seconds. You will see a linked chain on your screen once there are paired.
Glor

EA6900 Device List - Update cycle time frame?

Similar Messages

Maybe you are looking for