EA6900 has internet connection but the networksatus gives a sign no connection

I have manually set up my EA6900. It does work fine but on the UI screen by networkstatus it signs with a red dot that there is no internet connection but i can normal use the internet. Is there is something wrong with the firmware?

What Firmware version is currently loaded?
What region are you located?
Has a Factory Reset been performed?
Was a Factory Reset performed before and after any firmware updates then set up from scratch?
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://cognitiveanomalies.com/cisco-nat-how-nat-works/. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.

Similar Messages

Can I connect a PS3 wirelessly using internet sharing from my ethernet-wired iMac. It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac? It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac? It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's. My computer has internet connection thru router and my ATV has internet connection thru same router. My iPad can see the ATV but it can't see iT

My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!

Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.

HT1688 My husband's iphone can't connect to the App store after he updated to ios.7. He updated it yesterday and he has had problems since. He gets a message that the iphone can't connect to the app store and he has internet connection. Please help.

My husband's iphone can't connect to the app store after updated his phone to ios.7. and has internet connection.

Any update will cause problems for a few users. And those users will rush here and post "the sky is falling" stories about their experience. The 99.99% of people who have no problems after an update won't bother to post here; indeed, most of them don't even know ASC exists. FWIW, I had no problems with iOS 7 on my 4S. Your problem is most likely not related to iOS 6, but you should probably update anyway. For addressing the battery issue see this outstanding article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

HT4628 My macbook pro doesn't connect to the Wi-Fi at home while my iPad connects to the same Wi-Fi. When I try connecting my macbook to my iPhone's personal hotspot, the internet works but the issue is connecting my macbook to the Wi-Fi. Please help!!

My macbook doesn't connect to the Wi-Fi at home while my iPad connects to the same Wi-Fi. When I try connecting my macbook to my iPhone's personal hotspot, the internet works but the issue is connecting my macbook to the Wi-Fi. Please help!!
I don't understand how to fix this and I don't seem to understand where the problem is coming from.

Let's try the simple approach first. Restart your router. Any change?

HT6010 I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

Try this support document http://support.apple.com/kb/TS3694 and look at this section.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

"Linux has internet connectivity built in"

Can any one please tell me what does it mean "Linux has internet connectivity built in".
Information that I have is
Linux has built in internet connectivity : Internet connectivity is part of Linux's Unix heritage. Every major distribution of Linux comes with tools that can immediately get you up and running on the internet. Most even include Netscape Navigator as their browser of choice.
How I can make use of this in my e-business application? Help would be appriciated.
Thanks in advance.

Well, the sentence you quoted sounds a lot like some basic marketing babble.
All this says is: Linux can be used to access the Internet in some way, straight from the box. So what they're saying is that you can browse the web and probably send some e-mail as well.
The point is that just about any UNIX can do this out of the box.
The nice thing about Linux is the fact that a number of its distributions come packaged with other nice tools, like web servers, DNS server software, mail server software, IRC server software, database server software... Stuff like that. But the same thing goes for these: a lot of UNIX flavors (chocolat's my favourite!) come with stuff like this!
Solaris comes with BIND for DNS, Apache for Web serving and Sendmail for mail serving.
Maybe you could tell us a little bit more about your situation and what you're trying to do. That way we can give you some more interesting info!
Cheers!
Thomas
P.S.
I have to wonder though which article you got your quote from! Because I'm curious which Linux distro would be proud to call Netscape Navigator it's "browser of choice" these days!

Registry name and value to check if server has internet connection

Hi
I want to check that if server has internet connection though registry value. Can any one help me the path of registry to check if server has an internet connection or not

> Martin Can I get the script to check the server has an internet
> connection ?
Sorry, I don't have one - we never had the need to check this... Short
VBS snippet:
strURL = "https://www.grumpfasdklfhsdf.comm"
Set objExplorer = WScript.CreateObject("InternetExplorer.Application",
"IEWindow_")
objExplorer.Navigate strURL
Do While objExplorer.ReadyState <> 4
WScript.Sleep 100
Loop
Sub IEWindow_NavigateError( pDisp, sURL, sFrame, sStatus, sCancel )
WScript.Echo sStatus
End Sub
sStatus in the Sub will contain HTTP error codes. 502 for "Host not found".
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed

Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed

I have factory reset my phone twice.. I have disabled iCloud settings.. I looked up possible downgrading options.. which isn't possible. I feel as if my iPhone 4 was offered the update so I was forced to get another phone

Is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

It the same phone but you don't have to have data on it if you don't want since they are older phones. We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone. Mary

My iphone 4 screen has gone blank but the thone is still on.

My iphone 4 screen has gone blank but the thone is still on.

Hey NJF7,
Thanks for the question. After reviewing your post, it sounds like the screen is black. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been

G'day:
I am reposting this from my blog ("ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been") at the suggestion of Adobe support:
@dacCfml@ColdFusionCan you post your queries athttp://t.co/8UF4uCajTCfor all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85)April 29, 2014
This particular question is not regarding <cfclient>, hence posting it on the regular forum, not on the mobile-specific one as Anit suggested. I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
G'day:
Remember this one: "ColdFusion 11: preventing files from being included? [WTH], Adobe?". I can confirm this verymoderatelyslightly contentious feature has been changed in ColdFusion 11, but the docs have not been updated to reflect the change.
The issue is summarised thus (from the article linked-to above):
[...]out of the box ColdFusion 11 will only allow the inclusion of CFML and HTML files. Why? They cite "for security reasons". Here's a quote (posted in the bugtracker, originally from the pre-release forums):
"Vamseekrishna Manneboina: Yes, this was done as part of a security measure. You can now only include CFM/CFML files by default. You can specify additional extensions via a property called allowedextforinclude in neo-runtime.xml. By default, HTM and HTML file extensions are already added to this list/property, thereby allowing for inclusion of HTM and HTML files too by default."
OK, I disagree there's merit in this, some others agree, others disagree. But... so be it. I actually thought - if I was in a charitable mood - that the people that were "for" this change made a reasonable case for its inclusion, so - whilst not agreeing with them - I was content to just shrug and go "yeah, oh well".
Now this feature is still in the docs: "New in ColdFusion 11 - Restrictions", but this is not the way it now works. Initially I thought it had been removed completely (and I am now in the midst of retooling this article from saying that... as I only worked out what was going on 2/3rds of the way through writing it).
I did a secure install the other day, and one of the first things I tested was this:
 <cfset message = "before"> <cfoutput> #message# <cfinclude template="code.inc"> <cfset message = "after"> #message# </cfoutput>
 <cfset message="within"> <cfoutput> #message# </cfoutput>
And this all runs fine, as one would expect:
before
within
after
Next I checked neo-runtime.xml to see if the settings had been augmented to switch this off by default: but I'm buggered if I can see any reference to it anywhere.
So I then checked ColdFusion Administrator to see if there was any hint of it there, as this was one of the things Adobe said they were going to do in their solution to this. And there it is:
So by default now, anything is allowed. I figured I must have missed the setting in neo-runtime.xml, so changed the setting to "FOOBAR" so I could easily spot it, and there it is down @ /wddxPacket/data/array/*[16]/var[@name="compileextforinclude"] in neo-runtime.xml:
<var name="compileextforinclude"> <string>FOOBAR</string> </var>
And - having changed it back to something sensible: CFM, then the feature now "works":
before
#message#
after
However this is probably a worse security hole than the one they were trying to fix! It looks OK when looking at the render in the browser, but look at the actual raw mark-up:
before <cfset message="within"> <cfoutput> #message# </cfoutput> after 
We have unparsed CFML source code sent to the browser. This is awful. What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it? It's now publicly accessible. Adobe have created a feature which has the possibility to leak source code to the outside world. How is that a security feature?
Also interesting is that with the super-secure profile installed, this is still off by default? I would have thought it'd be on in this case?
I still don't think this feature has been implemented properly, and it all still points even more to the fact the Adobe ColdFusion bods don't really know what they're doing.
Anyway, I'll nudge Adobe to at least get the docs sorted out.
Time for work (3min ago)...
Adam

Hi Adam,
Regarding "What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it?", yeah I agree that'd be a problem. Hmm, maybe both this.allowedextforinclude *and* this.compileextforinclude should've been supported (instead of replacing the former w/ the latter as was done)? Example:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="cfm,cfml,inc,txt";
That way an exception could be thrown if cf|included file's extension wasn't in the this.allowedextforinclude list.
Perhaps the above could be shortened to:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="txt";//implicitly includes * from this.compileextforinclude (since -compile- implies -allowed-)
Dunno if that'd be confusing.
Anyhow, just some thoughts..
Thanks!,
-Aaron

The pdf file that i am converting has multiple pages but the conversion only exports the 1st page into excel. How do i get the product to include all pages on multiple sheets?

Hi,
The pdf file that I am converting has multiple pages but the conversion only exports the 1st page into excel. How do i get the product to include all pages on multiple sheets?

Hi christinek,
Can you please tell me how the PDF that you're converting was created? Sometimes, PDF files created by third-party PDF generators (that is non-Adobe applications), don't contain all the tags and file information necessary to ensure a proper conversion to Excel. There are no settings that you can change in ExportPDF to adjust how the file is imported.
You can tell how the PDF was created by choosing File > Properties in Reader and looking for the PDF Producer on the Description tab. If the PDF was created by a third-party, it just may not be written to spec. Please see Support Policy for PDF Files created by non Adobe applications.
Best,
Sara

I just reinstalled firefox, when I open new tabs it opens internet explorer, but the firefox ICON is in the top left

I just reinstalled firefox, when I open new tabs it opens internet explorer, but the firefox ICON is in the top left

Do you have an extension like IE View or IE Tab that opens pages in Firefox sing IE as the rendering engine?

I tried to buy the WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.

I tried to buy the WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.

Downloading past purchases from the App Store, iBookstore, and iTunes Store
To see which iOS version is installed, tap Settings > General > About

EA6900 has internet connection but the networksatus gives a sign no connection

Similar Messages

Maybe you are looking for