EA6900 Review Please
Some one please do a review of this router and we all know it is made by Belkin now. So far the reviews on Amazon have been bad.
Reviews posted on their own company site are usually made up. Need to go to an independent site which is unbiased.
Similar Messages
-
i am not able to sign in with my exisiting Apple id, every time it is asking for review, please help me
Use this link to Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
Money under review please help
hello, the 17th june i sold 3 digital items for 25usd , 25usd and 15usd. everything went well and he got what he wanted. the thing is the money has been under review for a while and i really need to buy something before august 1st. about 2 weeks before i sold these items, i sold one to another guy who sent me 10usd and the money was put under review for only 4 days but now this one has been under review for a while. Also, i am a very new seller so thats why all my transactions are put under review. i verified my paypal today with my bank account linked but i still didnt get the money. is there a way i could get it faster? please help and sorry for bad spelling im french canadian.
Hello everyone, I have Business Account at PayPal and i was accepting payments for our business. Before 2 months my accounts was gone for limited and PayPal asked to provide documents to restore. I had provided all required documents to restore account. After 7 days i got mail from PayPal at 6/9/2015 4:34 PM that Dear (name), Important information: We regret to inform you that we're initiating the closure of your PayPal account. This measure is necessary to protect us from potential financial losses. Your right to appeal: We always perform a thorough investigation before deciding to initiate the closure of an account. We appreciate that from time to time misunderstandings can happen. To appeal our decision log in to your PayPal account at www.paypal.co.uk and click 'Contact' at the bottom of any PayPal page. This decision means we need to oversee the appropriate movement of any money currently in your account. A gradual approach to account closure allows us to part ways, while considering any liabilities that may arise. Our aim is to review any valid buyer claims lodged against you. We need to allow enough time for claims to be filed as these can take several months to be reported and resolved. How and when will my account balance be released? 1. We'll hold any money currently in your account in accordance with section 2 below. We do this because it provides sufficient time for most claims, such as chargebacks, to be filed by other parties. These claims can result in financial loss. If your account balance is below zero, you'll have to settle the amount owing on your account to avoid further action. 2. Our first review at 30 days from the date of this email will calculate our exposure and we'll release any excess funds to you at that time for withdrawal. We'll communicate this to you at the time. This review can result in 3 different outcomes as detailed in subsections 2(1)-(3) below. We'll always communicate the outcome of our reviews to you. 2.1. We'll release your entire remaining balance to you for withdrawal. Note: If you choose not to withdraw the money at that point we reserve the right to recoup any money at the next review; or 2.2. We'll release a part of your remaining balance to you. If so we'll inform you about how much money can be withdrawn. We'll then conduct another review 30 days later that will repeat the process detailed under section 2; or 2.3. We won't release any funds to you if we deem our exposure to be greater than or equal to your available balance. Your account may be reviewed up to 5 times; at 30 day intervals until day 180 from the date of this email. If any money remains in your account at day 180, it will be made available for withdrawal at that point. When we part ways with merchants, where insolvency or administration is in place, or in some specific business models, we will usually hold funds up to 180 days. Accounts with a balance owing to PayPal: If your account shows an amount owing to us, you need to add funds to make sure that the balance returns to zero. Note: We reserve the right to recover the amount by legal means. A copy of our User Agreement can be found by clicking 'Legal' at the bottom of any PayPal page and then click 'User Agreement for PayPal Service'. Our right to close your PayPal account, and the retention of funds, are covered in our User Agreement under sections 10.2 and 10.3. Yours sincerely, David PayPal Now this is near to complete 2nd month and PayPal had not released any balance even in the last mail they said they will release a part of my money every month. Here now PayPal held my 126400.00 USD. My complete business has been down. I had mail to PayPal that Please release at least 10% of my money every month so i can continue our business. But no reply. Please let us any way with we can get a small part of our money every month. Best Regards
-
"Hot Folder to FTP" script review please
I'm trying to make a folder on my Mac that is a "Hot Folder." I want this folder to have an action/script that as soon as it sees a new file added it will open Fetch and upload via mirror to an FTP folder.
I was able to make the Fetch portion of the script without issue, but making the folder "Hot" is a bit more difficult for me. I tried to use some script from the sample script "add - new item alert" but have been unsuccessful. I'm hoping some of you Applescript pros can review this and tell me how to correct. Or perhaps you know of a better way to make this work with automator.
SCRIPT:
on adding folder items to this_folder after receiving added_items
try
tell application "Finder"
--get the name of the folder
set the folder_name to the name of this_folder
end tell
-- find out how many new items have been placed in the folder
set the item_count to the number of items in the added_items
--create the alert string
if the item_count is greater than 1 then
tell application "Fetch"
activate
make new transfer window at beginning with properties {hostname:"ftp.hostname.here", username:"myusername", password:"mypassword", initial folder:"/pub/pao/images/"}
mirror alias "Macintosh HD:Users:Bill:Desktop:test:" to url "ftp://myusername:@ftp.hostname.here/pub/pao/images/" format Automatic without delete strays
end tell
end if
end try
end adding folder items to
Thank you all!Well, the most obvious problem is:
if the item_count is greater than 1 then
If you drop a single file into the folder, nothing will happen. That's because item_count will be 1, not greater than 1.
If you don't care about how many files were dropped (because Transmit's mirror function will just synchronize the differences, then omit this line altogether - the script won't fire unless at least one file was added. -
Database DAO - JDBC Query Class - Code review please
I use the following class (Database.java) as a DAO for handling all database calls. The class works. You can use this if you're looking for a DAO solution (i.e. a way to query databases using connection pools / JNDI). I am looking for some suggestions on improving this class. Can you help? I.e. suggestions for improving SELECT speed, logic? The class is used by a moderately heavily used Web application (ca. 2000 - 3000 queries a day - so not too much) on a Sun Web Server system.
This class had the following interfaces:
getErrors() // for retrieving any errors that occurred during an query
setSql() // one way to set the SQL that must be run
setDbName() // one way to set the JNDI name of the database resource
getInsertDelete() // run the INSERT/DELETE statement that was provided with setSql
getInsertDelete(String givenSql, String givenDb) // run with provided sql and db
getClobInsert(String givenSql, String givenDb, Hashtable clobHash, String identifierSql) // clobHash contains the column name and the value (which is a string over 4000 chars). Identifier SQL is the SQL for identifying the row, into which the Clob must be inserted. This interface is specific to Oracle.
getSelect() // Query database with set SQL. Return as a vector of hashes so I can close connection.
getSelect(String givenSql, String givenDb) // select with given sqlAnd here is the full class. I know, this is a weird post, but we don't really have a code review process here at work, and I don't have a specific problem. Just want some feedback concerning the way I query our databases. So, any tips or comments are welcome.
package melib.network;
import java.io.Writer;
import java.io.StringReader;
import java.io.IOException;
import java.util.Vector;
import java.util.Hashtable;
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.ResultSetMetaData;
import java.sql.Clob;
import javax.sql.DataSource;
import javax.naming.InitialContext;
import melib.system.PropertiesReader; // This is just a simple class for pulling values from a .properties file
* Manages database connections.
* @author jetcat33
* @version 2.0, 2006-07-09
public class Database {
protected String sql = "";
protected String dbName = "";
private StringBuffer errors = new StringBuffer();
/** Creates a new instance of Database */
public Database() {
* Check completeness of data
* for example to check if dbname given or
* sql given or to make sure that yikes
* used instead of sccweb in test conditions
protected boolean checkData(){
if(dbName.equals("") || sql.equals("")){
Email.sendMail(PropertiesReader.getValue("statusEmail"),null,"MelibLibraryError","melib error: [Database]","No database selected for query (db: "+dbName+" or sql not included (sql: "+sql+")");
setErrors("No database selected for query (db: "+dbName+" or sql not included (sql: "+sql+")");
return false;
}else{
return true;
* Sets and gets errors resulting from
* exceptions - otherwise would have to
* somehow include errors in the results
* that are returned but that would include
* other more complicated stuff.
private void setErrors(String e){
errors.append("\n"+e);
public StringBuffer getErrors(){
return errors;
* Setter for the sql variable.
* @param givenSql The sql required to process
public void setSql(java.lang.String givenSql) {
sql = givenSql;
* Sets the dbName needed to commect
* to the correct database.
* @param givenDbName Name of the database - name and connections specified within this class
public void setDbName(java.lang.String givenDbName) {
dbName = givenDbName;
* Processes Insert and Delete requests with given SQL and DB Name.
* @param givenSql
* @param givenDbName
* @return String Number of rows affected
public String getInsertDelete(String givenSql, String givenDbName){
sql = givenSql;
dbName = givenDbName;
return getInsertDelete();
* Takes care of insert, update and delete requests.
* Must have set both dbName as well as the sql String.
* Will return number of rows affected as String.
* @return String Number of rows affected
* @exception Exception
public String getInsertDelete() {
int returnValue = 0;
if(checkData()){
Connection conn = null;
InitialContext initContext = null;
DataSource source = null;
Statement stmt = null;
try{
// Get connection from configured pool
initContext = new InitialContext();
source = (DataSource) initContext.lookup("java:comp/env/jdbc/" + dbName);
conn = source.getConnection();
if(conn != null){
stmt = conn.createStatement();
returnValue = stmt.executeUpdate(sql);
}catch (Exception e){
Email.sendMail(PropertiesReader.getValue("statusEmail"),null,"MelibLibraryError","melib error: [Database.getInsertDelete]","getInsertDelete Exception: "+e.toString()+"\nWith: "+sql);
setErrors(e.toString());
}finally{
try{
stmt.close();
}catch(Exception e){
e.printStackTrace();
try{
conn.close();
}catch(Exception e){
e.printStackTrace();
try{
initContext.close();
}catch(Exception e){
e.printStackTrace();
return returnValue+"";
* Processes Insert requests for SQL containing CLOBS
* @param givenSql
* @param givenDbName
* @param clobHash Contains column name of clob and clob text
* @param identifierSql Contains SQL to identify the just entered SQL so the clobs can be filled in.
* @return String Number of rows affected
public String getClobInsert(String givenSql, String givenDbName, Hashtable clobHash, String identifierSql){
sql = givenSql;
dbName = givenDbName;
String returnValue="";
int rv = 0;
if(checkData()){
Connection conn = null;
InitialContext initContext = null;
DataSource source = null;
Statement stmt = null;
try{
// Get connection from configured pool
initContext = new InitialContext();
source = (DataSource) initContext.lookup("java:comp/env/jdbc/" + dbName);
conn = source.getConnection();
if(conn != null){
conn.setAutoCommit(false);
stmt = conn.createStatement();
rv = stmt.executeUpdate(sql); // write first time
// Now get and overwrite "EMPTY_CLOB()"
ResultSet lobDetails = stmt.executeQuery(identifierSql);
ResultSetMetaData rsmd = lobDetails.getMetaData();
if(lobDetails.next()){
for(int i = 1; i <= rsmd.getColumnCount(); i++){
if(clobHash.get(rsmd.getColumnName(i))!=null && !clobHash.get(rsmd.getColumnName(i)).equals("")){
Clob theClob = lobDetails.getClob(i);
Writer clobWriter = ((oracle.sql.CLOB)theClob).getCharacterOutputStream();
StringReader clobReader = new StringReader((String) clobHash.get(rsmd.getColumnName(i)));
char[] cbuffer = new char[30* 1024]; // Buffer to hold chunks of data to be written to Clob, the slob
int nread = 0;
try{
while((nread=clobReader.read(cbuffer)) != -1){
clobWriter.write(cbuffer,0,nread);
}catch(IOException ioe){
//System.out.println("E: clobWriter exception - " + ioe.toString());
}finally{
try{
returnValue+=" Writing: "+rsmd.getColumnName(i);
clobReader.close();
clobWriter.close();
}catch(IOException ioe2){
//System.out.println("E: clobWriter close exception - " + ioe2.toString());
conn.commit();
}catch (Exception e){
Email.sendMail(PropertiesReader.getValue("statusEmail"),null,"MelibLibraryError","melib error: [Database.getClobInsert]","getClobInsert Exception: "+e.toString()+"\nWith: "+sql+"\nAND\n"+identifierSql);
setErrors(e.toString());
}finally{
try{
stmt.close();
}catch(Exception e){
e.printStackTrace();
try{
conn.close();
}catch(Exception e){
e.printStackTrace();
try{
initContext.close();
}catch(Exception e){
e.printStackTrace();
returnValue=rv+" "+returnValue;
return returnValue;
* Takes care of Select statements.
* Must have set both dbName as well as the sql String.
* Will return a vector.
* @return Vector of Hashes containing the Results of the query
* @exception SQLException
* @exception Exception
public Vector getSelect(){
Vector returnValue = new Vector();
if(checkData()){
Connection conn = null;
InitialContext initContext = null;
DataSource source = null;
ResultSet result = null;
ResultSetMetaData rsmd = null;
Statement stmt = null;
try{
// Get connection from configured pool
initContext = new InitialContext();
source = (DataSource) initContext.lookup("java:comp/env/jdbc/" + dbName);
conn = source.getConnection();
if(conn != null){
stmt = conn.createStatement();
result = stmt.executeQuery(sql);
rsmd = result.getMetaData();
while(result.next()){
Hashtable hash = new Hashtable();
for(int i = 1; i <= rsmd.getColumnCount(); i++){
if(result.getString(i) != null){
hash.put(rsmd.getColumnName(i),result.getString(i));
}else{
hash.put(rsmd.getColumnName(i),"");
returnValue.addElement(hash);
}catch (Exception e){
Email.sendMail(PropertiesReader.getValue("statusEmail"),null,"MelibLibraryError","melib error: [Database.getSelect]","getSelect Exception: "+e.toString()+"\nWith: "+sql);
setErrors(e.toString());
}finally{
try{
result.close();
}catch(Exception e){
e.printStackTrace();
setErrors(e.toString());
try{
stmt.close();
}catch(Exception e){
e.printStackTrace();
setErrors(e.toString());
try{
conn.close();
}catch(Exception e){
e.printStackTrace();
setErrors(e.toString());
try{
initContext.close();
}catch(Exception e){
e.printStackTrace();
setErrors(e.toString());
return returnValue;
* Takes care of Select statements with given SQL.
* Must have set both dbName as well as the sql String.
* Will return a vector.
* @return Vector with Results of the query
* @exception SQLException
* @exception Exception
public Vector getSelect(String givenSql, String givenDbName){
sql = givenSql;
dbName = givenDbName;
return getSelect();
}Thank you,
dailysuntoo much code that's repeated. refactor all the code you have for closing resources into a utility class and simply call its methods.
your dao creates the connection, so it can't participate in a transaction. if there are several daos that should be one unit of work, you can't manage it with this framework.
transactions are under the control of a service layer. I think it's better to have the service object get the connection, pass it to all the DAOs needed for that unit of work, and then have the service close it.
e-mailing errors? I don't like it. if you have 2-3K queries a day failing because the database you'll have 2-3K e-mails to delete. better to log messages. if you really want e-mail, you can have Log4J add an e-mail appender. at least that way it's configurable outside the code.
CRUD operations without an UPDATE? You're missing something important.
What if I don't want to get the database from a JNDI datasource? Now you can't use this DAO without an app server.
Your error messages are less informative than a stack trace. Why not throw an exception with detailed info?
have a look at Spring and how it handles persistence. if you insist on writing your own, might want to look at Spring. Rod Johnson has developed a much better, more general way to handle persistence.
http://www.springframework.org
You return a Vector of Hashtables for queries? Two old-school data structures. You understand the implication of choosing those, right? I'd recommend that you change that to a List of Maps. Let the concrete types be ArrayList and HashMap. Interfaces are preferred, because they let you change the implementation without affecting clients. Vector and Hashtable are synchronized by default; ArrayList and HashMap are not. Synchronization is thread safe but slower.
I understand why you chose to return Vector, because you wanted something general that wouldn't force you to deal with object-relational mapping. This way you can just worry about ResultSetMetaData.
A Vector of Hashtables is a row-based view of the ResultSet (one Hashtable per row). Sometimes a column based view can be more convenient. Then it's a Map of Lists.
You gave it a good try, but I think there's a lot of room for improvement.
% -
Hi I already have program developed for charging of a electrical vehicle prototype using charger controller and communicating between the hardware and the PC through ethernet via cRIO and NI I/O modules. I want the program to be available on a remote handheld device (tablet/mobile). What is the best option among the three?
1) LabVIEW Webpager
2) RTI DDS Toolkit with RTI Connext or
3) Data Dashboard
I have 2 specific queries:
a) Since Webpager seems to be the simplest solution, I want some reviews or feedback of it before I make a choice.
b) In the online tutorials for Data Dashboard, they tell us how to create a fresh program and implement of Dashboard. However my program doesn't have any shared variables except the already existing ones for the NI I/O modules, how do I deploy the indicators and controls on dashboard?What is the future of this application? You say this application supports a "prototype" electric vehicle. Will this application be evolving into a long term permanent solution for a production electric vehicle? The correct solution will vary significantly based on that answer.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Carmenu problems/mini review - Please Nokia read!
I have wrote a small (missing features/bugs) review of Carmenu here.
I wish Nokia could comment; if we pay, can we ask for improvements?Hi there, the thread is back again.
Updating some info for the developersfrom the other new thread, I have asked the moderator to delete if he/se wishes.
My the tested configuration is:
- Nokia N96: firmware 30.033
- Carmenu (phone app) version 2.6
- Car Kit (Ck-300) unit HF-21W: firmware v1.40
Summary of current defects/bugs:
- Slow load time: should be lowered to less than 2/3 seconds
- bluetooth phone pairing needs shaping
- Improve user interface design
- Landscape version doesn’t work on “landscaped” phones
- Portrait version clips the display when phone is “landscaped”
- Add music playlists
- Add album covers while playing music. Would be nice to have an track artwork browser
- Phone ringtones appear in the music track list - possible to filter them out?
- Missing fast forward/rewind functionality in music player
- Doesn’t work with Maps 3 - Remote control commands are ignored in Maps 3
- Missing Car Kit remote control input in Carmenu->Maps->address search; should be something like the method used to select contacts/tracks, to help input while driving
- Add TV and radio control inside Carmenu
- Remote control doesn’t allow phone interaction outside of Carmenu, apart from phone call functions.
- Music player should “remember” last played track, helping when entering/exiting car often. It could be within a reasonable timeout, say 30 minutes.
- When exiting track playback, navigate back to the top menu accordingly, instead of jumping back to the top menu
- Fair too long delay for total music track count; cache data somewhere?
- Voice alerts are being clipped, particularly when the audio to be muted is not being played on car stereo's AUX input; big improvements needed here
I also suggest Nokia developers to include, when releasing updates, a list that shows what defects have been fixed and the "known defects/bugs" in current release; this would help users to know exactly what to expect, before installing the update. -
I'm in the process of updating this site and would appreciate
some reviews.
http://www.westlight.net/
I seem to have problems with the buttons which were set up
as a "library item". Occasionally they seem to load slowly or one
might not load at all or long after the others. Was using the
"library item" feature a mistake? I've thought about creating the
buttons in Flash, but my skills there are limited and not sure if
there's an advantage to using Flash.
Yes, the home page was made from a template which I revised.
ThanksDavid,
I agree with joe's suggestion about checking with
websiteoptimization.com, because it saves lot of trouble, time and
"money". If you want to make more money or your online gallery
become more highly profitable, which means fastest loading on any
browsers across all kinds of online access, including fastest
broadband cable/wireless networks/corporate networks, and painfully
slow as snail modems.
We, as designers, have some luxury of having access to
broadband service. But we need to remember the other side of
broadband service on our end, we have to act like other Internet
users and use like very slow, old computer with slow modems.
You might want to check at public libraries' public
computers, they usually be a bit out of dated computers or old
networks. Very few public libraries can afford to upgrade their
system to current.
On other hand, of course, we have no control over what is
going to happen to other Internet users, particularly who enjoy
photography subject, and if they find your site is painfully slow
as snail loading... I am sorry to say, but they'd stop and go
elsewhere. Unless if some of them use faster broadband access, then
it might not be an issue.
Also, there is other factor that we don't have control over
-- web server feeding information from its servers to clients' web
browsers over Internet depending on time of the day or night... if
there is heavy traffic associated with that web server, then it is
a good chance that it will be slow loading/feeding the information
from system to other. That, we don't have control over with.
Ideally, try to keep files small as much as possible. I know
it is bit of tweaking, some kind of brilliant technique applied and
willing to experiment and learn more and go for the best possible
solution all the way.
Just some thought and suggestion.
BTW, I especially am impressed with the quality of
professional photos you took. I am being blown away with ices being
so bright blue... that is so brilliant capture and nice compostion
in those pictures.
Cheers, DWD (Brian) -
It's me again asking for some feedback. Please take a look and give me your thoughts. I hope to go live with this before Monday.
That said, I know there is a huge hole at the bottom of the resource page and I am missing about 8 bios. They are trickling in though and the site isn't going to wait for them.
http://web.mac.com/dsburton/BruderCounselingCenter/Home.html
Thanks a bunchlooks really good and professional. I think you should put less shadow on the BLACK Bruder Counseling in those 3 pages.
also the pictures are really good (did you take them), but the rest of the pages look dull compared to them. try using more colors not just white black and gray, also try some clean-cut shapes and effects. -
I need a site review. This web site was redesigned recently,
what do you think?
http://www.peoplesearchnews.com/
And for those of you "music haters" (you know who you are)
the music only plays for the first few seconds and then
stops.I'm talking about the code on the site itself.
Template Monster used to spam this and other forums. I will
never encourage
anyone to support them.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Shane H" <[email protected]> wrote in
message
news:[email protected]...
> Are you talking about the code of templatemonster.com?
If so, that is no
> room for comparison, as all the templates are submitted
by different web
> designers.
>
> If you're referring to that template on the
templatemonster website,
> correct me if I'm wrong, but I see no way/place to view
the source code of
> that template without purchasing it...
>
> --
> Shane H
> [email protected]
>
http://www.avenuedesigners.com
>
> =============================================
> Back for 2007, close-up magic:
>
http://deceptivemagic.com
>
> Web dev articles, photography, and more:
>
http://sourtea.com
> =============================================
> Proud GAWDS member
>
http://www.gawds.org/showmember.php?memberid=1495
>
> Delivering accessible websites to all ...
> =============================================
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> Go look at the code on the template monster site
first....
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Shane H" <[email protected]>
wrote in message
>> news:[email protected]...
>>> Nadia,
>>>
>>> I doubt the template had any errors to begin
with. He added his own
>>> content, so what? That's hardly any room for him
to say he "redesigned"
>>> the website. IMO, a redesign of a website would
be a brand-new design
>>> from the designer. In this case, that wasn't so.
>>>
>>> Maybe I interpreted his statement differently,
that's all.
>>>
>>> Take care,
>>>
>>> --
>>> Shane H
>>> [email protected]
>>>
http://www.avenuedesigners.com
>>>
>>> =============================================
>>> Back for 2007, close-up magic:
>>>
http://deceptivemagic.com
>>>
>>> Web dev articles, photography, and more:
>>>
http://sourtea.com
>>> =============================================
>>> Proud GAWDS member
>>>
http://www.gawds.org/showmember.php?memberid=1495
>>>
>>> Delivering accessible websites to all ...
>>> =============================================
>>>
>>>
>>> "Nadia : *Adobe Community Expert*"
<[email protected]>
>>> wrote in message
news:[email protected]...
>>>> "Shane H"
<[email protected]> wrote in message
>>>>> It's a template?! That's not cool,
Michael.
>>>>
>>>> Why? isn't it cool.
>>>>
>>>>> I just lost all respect for you.
>>>>
>>>> What a thing to say :\
>>>>
>>>> Shane, you yourself said the page validated
and that's no mean feat
>>>> with a templatemonster creation !!
>>>>
>>>> He didn't design the layout from scratch so
what. I didn't see him say
>>>> that he designed the layout - he said '
redesigned'... that's probably
>>>> where the 'cleanup' comes in. at least the
the effort was made to
>>>> clean up the code and that's pretty
important in my opinion.
>>>>
>>>>
>>>> --
>>>> Nadia
>>>> Adobe® Community Expert : Dreamweaver
>>>> ----------------------------------------
>>>> CSS Templates |Tutorials |SEO Articles
>>>>
http://www.DreamweaverResources.com
>>>> ~ Customisation Service Available ~
>>>>
http://www.csstemplates.com.au
>>>> ----------------------------------------
>>>> CSS Tutorials for Dreamweaver
>>>>
http://www.adobe.com/devnet/dreamweaver/css.html
>>>>
>>>
>>>
>>
>>
>
> -
I am a first time builder and have been studying this forum (great contributors here) for guidance on building a CS5 Premiere compatible system. The components (my proposed system below) are familiar as much has been gleaned from proposed systems from others.
I initially ran eXtreme Power Supply Calculator Pro v 2.5 using a 750W power supply but was right up against the limit. I wanted to leave a bit of room for an additional hard drive or two in the future as well as another 12Gb of memory so it put me up to an 850W PSU.
In addition to the advice given on this board I read “Building the Perfect PC” (O’Reilly) 2011 edition and their editing system build is similar to suggested builds on this board. It seems like a good resource – especially for a first timer like me.
A couple questions – it looks like the i7 comes with a heat sink and fan, yet builders are including aftermarket CPU fans in their builds – are the included fans inadequate/noisy/problematic? Also, I see several competing brands for the video card, is MSI a better build than others?
Please look over the list below and advise if you see any incompatibilities (like does the PSU fit in the case).
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Computer Case With Side Panel Window
CORSAIR CMPSU-850TX 850W Power Supply
ASUS Sabertooth X58 ATX Intel Motherboard
Intel Core i7-950 3.06GHz LGA 1366 130W Quad-Core Processor
Noctua NF-P12-1300 CPU Cooler and Case Fan
(3) CORSAIR Vengeance 4GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory
MSI GeForce GTX 470 (Fermi) N470GTX Twin Frozr II Video Card
Boot - SAMSUNG Spinpoint F4 320GB 3.5" SATA 3.0Gb/s Internal Hard Drive -Bare Drive
(3) SAMSUNG Spinpoint F3 1TB 3.5" SATA 3.0Gb/s Internal Hard Drive -Bare Drive
SAMSUNG Black Blu-ray Drive SATA Model SH-B123L LightScribe Support
Microsoft Windows 7 Professional 64-bit 1-Pack for System Builders
Comments are appreciated, Thanks!Almost finished - need some help!
I bought the components, put it all together and it works. I ran it through a burn in using BurnIn Test and all seemed well. I did clean installations of all my application software (all programs run perfectly). I then began to transfer the data from my old PC using a USB External hard drive. I was able to transfer part of my data.
I am able to connect the USB External hard drive to my old Vista PC - it sees the drive and all contents. I can add to it , delete, whathever (full functionality).
The problem is when I plug the USB External hard drive into the USB port on the the Win 7 Pro build, Win 7 does not see it (initially, I it did and I was able to transfer files). At first, when I plugged in the USB Ext HD, autoplay detected it, it opened in windows Explorer and I was able to drag and drop files to my new system.
Now when I plug in the USB Ext HD, I see the indicator light go on that it is being accessed but autoplay does not start. If I wait a 10 minutes or so, then start windows Explorer, the drive letter appears but when I click on it, windows Explorer stops responding. the only way out is to disconnect the USB Ext HD - this frees windows explorer and I get a message that the drive (now no longer connected) needs to be formatted (when I check it on my Vista system, it reads fine, all files intact).
I experimented with a 1Gb USB thumb drive, same thing happened - not visible, hangs windows explorer.
I tried to unistalling the "mass storage device" USB drive (successfully) then reconnecting the USB Ext HD. Win 7 re-installed the driver and indicated the device was ready for use. However, when trying to access it, I have the problem described above.
So it seems I have some kind of USB problem - not sure if it is hardware or Windows 7 related. It worked for a while but now it does not. I could really use some help diagnosing my problem.
Thanks -
Universal Audio 2-610, Reviews Please :)
This is the stereo pre I have my eye on. I have liked the sound quality I've heard on samples that are out there as well as the pro audio reviews I've seen. It's the general budget I expect to shell out when I've saved it up.
Anyone here liking or disliking it?
My primary usages will be stereo keyboard recording, live percussion, vocals, and electric bass. I produce soulful house music and want my analog recordings to compliment (in warmth) the electronic programming in the tracks. The stereo pre will feed into an Apogee Rosetta AD for conversion.
Ideas for alternatives, specifically stereo pres or ones that will cost around $2k or less in a pair, would be greatly appreciated.
Thanks,
ewell I have used it on percussion quite often, but the tubes make it a bit "slow" in picking up transients so you lose some of the crispness. a solid state pre will have a faster response and pick up more of the attack of things.....of course the trade off is warmth......so most of the time I use a solid state pre for percussion, drums, overheads......but I'll use the UA on room mics to give drum tracks some more warmth and bottom end.
for vocals, electric guitars, basses, the smoothing out of transients is usually a very desirable quality.......sort of like adding a slight bit of limiting to the tracks as they are recorded. but if you record everything for a song through the UA, you have to be careful or the overall track can sometimes get a bit "mushy"...... -
Hi all. I am considering buying an iPhone 3G, as I really want one, but not with all the bugs. Based on your experiences, can you tell me if the 2.1 update fixed most of the major issues, and explain what it did and didn't fix.
Thanks a lot. Appreciate it.
-MacWiz1220Ok... Now for the negative... sorry - it's a rave... I live in the middle of Sydney (Darlinghurst) and I have had terrible problems with 3G reception... no matter where I am... or in what capital city for that matter... it flicks from edge to basic and back again - only occasionally getting 3G... I took it o the genius bar at the apple store in Sydney and we couldn't get a 3G signal there... so it obviously has a problem... my wife's Nokia N95 has no problems at all on the 3G network... it's embarrassing... The genius at the Apple store told me they would swap the phone for me - as clearly it does not work as it is supposed to work.... although I was reluctant to swap - as it is a major hassle - and I am convinced it is a hardware issue... he advised me to wait and see what the 2.1 firmware would fix... well, it fixes nothing... I have installed it this morning and I have gone around town to test it - and I am experiencing the same problem... So what do I do Mr Jobs?.. what do I do?
Do I swap it for another handset that will give me the same problem? Or are you going to be secretly shipping new phones out over coming weeks with a different chipset... one that works?... do I wait for that? or do I just get a Nokia?... I just want it to work as it supposed to... once again early adopters are being used and abused... the brand damage over this issue is incalculable... I have advised NO-ONE to get an iphone since purchasing it... ordinarily all we Mac users say is "Get a Mac"... I've been saying that for 12 years... I'm somewhat saddened to have been forced to change my tune... I would say wait... wait for them to turn this lovely device into one that works...
It is meant to be a work tool... imagine if we bought a shovel from the hardware store and when we got it home and attempted to dig a hole with it... and it suddenly turned to rubber and went wobbly during the dig... we'd be furious... but no... what happens?... after months of denying there is an issue, the hardware store releases a statement that says that soon they will be releasing an update to fix the known wobbly shovel issue... but in the meantime - when you experience the wobbly shovel issue - the workaround is to just stop digging, put the shovel back in the shed for 5 minutes - and then get it out again...
shame apple shame. -
Nodejs-unstable - review please
Hi, I'm the maintainer of nodejs, and I inherited the PKGBUILD from the previous maintainers. With nodejs-unstable, I'm starting from scratch. Here's what I came up with:
# Maintainer: James Campos <[email protected]>
pkgname=nodejs-unstable
pkgver=0.3.1
pkgrel=1
pkgdesc="Evented I/O for V8 javascript"
arch=('i686' 'x86_64')
url="http://nodejs.org/"
license=('MIT')
depends=('python2')
optdepends=('openssl: TLS support')
provides=('nodejs')
source=("http://nodejs.org/dist/node-v$pkgver.tar.gz")
sha256sums=('19c4c6144af143fbe37f80ec5d2843c4e19b5b6054fb10225bec314b60d2d012')
build() {
cd "node-v$pkgver"
# python2 fix
for file in $(find . -name '*.py' -print) wscript tools/waf-light tools/node-waf; do
sed -i 's_^#!.*/usr/bin/python_#!/usr/bin/python2_' "$file"
sed -i 's_^#!.*/usr/bin/env.*python_#!/usr/bin/env python2_' "$file"
done
sed -i "s|cmd_R = 'python |cmd_R = 'python2 |" wscript
sed -i "s|python |python2 |" Makefile
./configure --prefix=/usr
make
package() {
cd "node-v$pkgver"
make DESTDIR="$pkgdir/" install
install -D -m644 LICENSE $pkgdir/usr/share/licenses/${pkgname}/LICENSE
# vim:set ts=2 sw=2 et:
a couple questions / comments:
since md5 / sha1 sums have known weaknesses, instead of merely recommending sha2 sums in the wiki, shouldn't one of the sha2 sums be used by default in /etc/makepkg.conf and the PKGBUILD.proto files in /usr/share/pacman ?
I keep getting warnings about using $srcdir, even though I really don't refer to it in my PKGBUILD. Bug? Also this is confusing / inconsistent, since the wiki uses it, but apparently makepkg doesn't like it.
did I do the license bit right? the wiki says "The license file(s) should be included in /usr/share/licenses/$pkgname/ e.g. /usr/share/licenses/dibfoo/COPYING.", so would I be ok with just `cp`-ing the file, or do I have to use `install -D -m644` (which I just copied from the nodejs PKGBUILD). Explicit instructions / code in the wiki would be helpful for a noob like me .
any questions / comments from you guys would be welcome.aeosynth wrote:since md5 / sha1 sums have known weaknesses, instead of merely recommending sha2 sums in the wiki, shouldn't one of the sha2 sums be used by default in /etc/makepkg.conf and the PKGBUILD.proto files in /usr/share/pacman ?
It is just a download integrity check. You can put whatever value you like in the PKGBUILD.
aeosynth wrote:I keep getting warnings about using $srcdir, even though I really don't refer to it in my PKGBUILD. Bug? Also this is confusing / inconsistent, since the wiki uses it, but apparently makepkg doesn't like it.
Grep you package files for references to the directory you built the package in. Sometimes packages like hardcoding references to it into their files... Or it could be a false positive on makepkg's behalf.
aeosynth wrote:did I do the license bit right? the wiki says "The license file(s) should be included in /usr/share/licenses/$pkgname/ e.g. /usr/share/licenses/dibfoo/COPYING.", so would I be ok with just `cp`-ing the file, or do I have to use `install -D -m644` (which I just copied from the nodejs PKGBUILD). Explicit instructions / code in the wiki would be helpful for a noob like me .
The license looks fine to me. -
I have a working project (attached), but I'd like any suggestions on how I might do it better.
I have tried to keep to good object-oriented design principles such as 'Single Responsibility' and 'Encapsulation', but I'm always keen to do better.
Thanks
Mark
N.B. Doesn't allow Zip files, so you'll need to rename the attached '.doc' file to '.zip' before unzippingHi Mark,
I think I have 3 improvements for you:
1. The time you print,is a calculated time, not the actual time when the printing occurs. I mean: You create a Calendar instance when you start your program, and then add 300000 ms (= 5 minutes in ms precision) every time the loop is executed. If for some reason, there is some delay somewhere, you will not easily notice, because your program prints what it calculated as the current time, which is not necessarily the current time.
What I did in my solution, was creating a new Calendar instance every time I need to print the current time, and then get the time from this instance.
When I made my 1st solution to this homework, using Threads, I used a sleep for 5 minutes, expecting that I would receive a printout every 5 minutes. Running this program for an entire night, I noticed that my printouts showed a few seconds past the 5 minutes. I guess this was caused by the time the statements were using every during every loop. Imagine the error when the program would be running for weeks, or even months. If I would have printed a calculated time, I would probably not have noticed this error.
Bottom line of this improvement: I think it is better to print the contents of the system clock, rather than calculating what you think is the time.
2. When calculating the start time for your 5 minute Timer, yous use only second precision. After that, you use millisecond precision to calculate the next 5 minute time. What you don't take into account is that your startCalendar also has a millisecond field. Ideally, this has the value 0, but in the worst case, it has the value 999, causing your start time to be 1 second too late.
My solution for this homework uses the epoch value of the current time (the milliseconds since midnight of jan 1, 1970) to calculate the start time. You can read this value from a Calendar instance using the method getTimeInMillis().
The algorithm I use:
- Divide the current epoch value by 300000 (= 5 minutes).
- Increase the result by 1, and multiply again with 300000. This gives me the epoch value for the next 5 minute period, with millisecond precision.
- The difference between this calculated epoch, and the current epoch, is the number of milliseconds delay I need to be (almost) exactly at the next multiple of 5 minutes.
- Finally, I use the method scheduleAtFixedRate(task, initialDelay, 300000), whereas you use scheduleAtFixedRate(task, startDate, 300000)
I used the same procedure to calculate the start time of the 30 second intervals during the uneven 5minute periods. I ran this program for more then a day, and it always printed exactly at multiples of 5 minutes or 30 seconds (printing the system clock, not a calculated value :-) )
As a test, I also printed the delay that I calculated at the start of the 30 second task. It appeared that the delay that was calculated, was always around 29960 milliseconds (+/- 10). Therefore, I believe that my printouts are made with a millisecond value close to 0, every time.
Bottom line of this remark: Using epoch to calculate the start time is more accurate than making calculations with minute and second values.
3. In the method startReading in class Homework1, you trust that you receive the method call at an exact multiple of 5 minutes. If for some reason, the method was received with a delay, all your 30 second printouts will suffer from this delay. If on the other hand you calculate the delay until the next multiple of 30 seconds (same calculation as in point 2, but divide / multiply by 30000 instead of 300000°) then the first 30 second printout will suffer from the delay, but all other printouts will come (almost) at multiples of 30 seconds with millisecond precision. I believe this makes the solution a bit more robust.
Bottom line of this remark: Never trust that you get what you expect, always verify what you get.
Maybe you are looking for
-
I am unable to scan from my HP all in one printer/scanner
Since installing Mavericks I am unable to scan using my HP printer/scanner. I have uninstalled the software and tried to just use Apple method - but really cannot find out how to scan and save. Does anyone have any ideas?
-
Hi Thanks in anticipation. I have done bill of entry for Import PO.while doing MIGO the 2% value on CVD and 1% value on CVD and $ % ADC is not getting coppied.in excise register. i have used JCV1 for CVD and JECV for ECss on CVD and JCV1 for SECS on
-
Still unable to access devices. I'm on Lion 10.7.5
For no reason that I can think of, I no longer show any device except flash drive. No card slot, no card reader for photos. PLus it seems a usb port no longer fumctions. Do I need to take to apple dealer?
-
Unable to install update, an error occurred installing iOS 6. How do I fix this??
I cannot complete my installation process. It has already downloaded ios6 into my iPhone but when trying to install it says "an error occurred..."
-
Has anyone experienced a problem with trying to open and view a model created and saved in ODM ver 3.0.0 Build 653 When attempting to reopen it in ODM, the file opens, but none of the model objects exist. The model appears to be empty....HELP!! Edite