EA6900 Update and Two Suggestions for Future Firmware "Nice to Haves"

Hey, first off, I've been a user of Linksys Routers for many years now, so I am familiar with the different settings and other selections that you generally see on the firmware pages. As to the EA6900, I am very, very PLEASED with how this router initially set up, along with the different pages in it's firmware. With the one exception noted below, the pages and the various settings "flow" very well. This baby is up and kickin and the house is literally dripping in both 2.4 and 5 GHz RF. The DHCP Reservation and MAC Wireless Filtering Tables worked without a hitch. The setup for FTP and NAS was simple! BTW, the setup for FTP shares is far easier than what we had to do using the EA3000 firmware. Kudos there! I am using the router associated with a server that is hosting about 25 different wired devices throughout the house, with a Cisco SG-200-08 Smart Switch behind the router for the LAN, which is load balancing on a Teamed (2 NIC'S) 2GB Adapter . The router grabbed Comcast's Native IPv6 and set that up flawlessly. Here is the information on how all that went (read from the bottom up): http://www.dslreports.com/forum/r28693387-IPv6-Dumb-Questions-About-My-IPv6-Goat-Roped-Hookup Information on how the netwrk worked in Teaming and LAG mode is here: https://supportforums.cisco.com/message/4071888#4071888
OK:, So, Mr. Linksys Firmware Developer, whoever and wherever you are, I have two suggestions on the user GUI that would make everyone's life a little easier next time the firmware is updated:
1. Please make it so numbers, particularly MAC and IPv6 numbers, can be copied and then pasted to another place in the firmware. For example, in the Information tab of the Device Settings section, I should be able to copy MAC and IP numbers and then be able to paste them, say, in the DHCP Reservation Table. Other Linksys device firmware allowed for this.
2. For goodness sakes, PLEASE don't nest the Diagnostics tab under the Troubleshooting group. It drives me nuts to think that getting the router's status, to ping or traceroute, or to do a firmware backup would be found in "Troubleshooting". Suggest that all y'all just remove the Diagnostics tab to the far left side of the application and have that item as its own stand-alone group!
Then I will be most happy. As if it really matters, BUT I wanted to give all y'all my perspective from a user way down in the day-to-day weeds. A most happy Boy otherwise.
Crazy Jumpin jack
Marietta, GA
Crazy Jumpin Jack (Gregory)

Hi Crazy Jack,
We'll get the Team into your suggestions and commendations. Appreciate the feedback. We hope to see you help out in the Community as well.
Regards,
24JUAN80
Linksys Support Community Moderator
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Similar Messages

Suggestion for future firmware release

Hi, I'm proud to be a possessor of an AirPort Extreme and I would reccomend some useful deficiencies for future firmware update.
The ability to specify DNS1 and DNS2 for DHCP Client (I don't want that AirPort resolve itself)
The ability to quickly turn off and on wireless for health and green respect.
I'm thinking at a small application that doesn't restart AirPort but only turn off and on wireless and wired host continue to work.
Obviously AirPort Extreme doesn't have any hardware button to turn off wireless, but this could be a great thing for future models of AirPort...
Best regards!

Why not let Apple know directly about your suggestions?
AirPort Extreme Feedback

E71 Feedback and Wish list for future development

Hi Nokia and Nokia Fans.
E71 is a masterpiece but I believe there's much room for improvement. My E71 is indispensable to me. I wish Nokia will strive to thrive the E series and in particular the E71.
Here's my wish list / features to add:
1. A Task Manager for Symbian that's Nokia naively developed is absolutely essential as it's required to manage all aspects of applications, processes and threads, especially the misbehaving ones.
2. Use better GPS Chipset with better sensitivity as the current one is really slackly.
3. High-Speed WiFi connection to access and manage the phone including the mass storage instead of fiddling with wires.
4. Secure zone for creating password-protected notes/memos/etc, previously called "wallet".
5. Add SMS "Listen" feature for sent messages.
6. Add "Timed" Profiles.
My feedback / Issues to fix:
1. "Memory card in use" Error. Despite proper removal of USB connection when using PC Suite or Mass Storage data transfer.
2. Configure to display "Firstname Lastname" format .
3. Configure Date display to American format (Wednesday December 03 2008).
4. Save current "configurations and user preferences" for future deployment after firmware upgrade or maintenance routine.
5. When receiving a Bluetooth message with (.sis or .sisx) attachment, provide save to memory card option rather than launching installtion process.
6. Setting up "WPA2 Only" mode on WLAN Security Settings for a particular Access Point will not allow communication despite the access point router/gateway is configured to work on this particular mode.
7. Camera is another isssue. Fix color fidelity and picture clarity issues.
Thanks
.......To be revised as needed.

Nice wishlist, willing to front up the extra cash to have these features? Got to remember that until these feature become more common they will stay as premium items and that you need to pay the extra money or move to a higher priced plan for them. Getting something like device locks would be great though but then what would device locks do for a customer base? and they do have the data encryption built in....
I would like to see a 16:9 aspect ratio in the next version of the phone myself. A holster pouch w/ belt clip rather than looking for and buying an ill fitting pouch cos I really don't like the pouch it comes with and cant find a nice one. The ability to have more than just the plain 6 applications on the screen, it used to scroll if I remember correctly in the older ones. The ability to skip music tracks when pressing volume up or down. 3.5mm audio jack. Time and date or at least time shown on the top strip of the display when going through the menu (there are a number of time I want to know the time and have to program juggle to find out what it is. More symbols on the other keys rather than just on the right hand side, I do have 2 thumbs available to use and fairly dexterous with either hand.
Less "download - **bleep**" in the web menu it takes me to a link with useless stuff on it.....
That GPS chip needs to be replaced, it has me walking down the road or in my neighbours house when I'm just lying in my lounge.
This wish is for all Nokia Symbian devices, I would love to see a Nokia App store. I'm sure it'll come around once they get the symbian foundation off the ground but i'm impatient and a lil lazy and haven't always got the time to find an application for something I have thought up. Blackberry and Apple have got something of a centralised store up and running, C'mon Nokia! Get a move on!
Nokia E71-1 (254.03)
110.07.127
RM-346

Suggestion for future release

Where should I post suggestions for future releases of SQL Developer or/and Data Modeler?
Please give me a link.
Thanx,
Chris
One suggestion for Data Modeler:
In the "Model Properties" of a relational model, there should be a "scripts" folder like in the "Table Properties".
In this script I'd like to generate some global statements for the DDL generation,
for example:
before (=begin of generated script): set define off; alter session set nls_numeric_characters='.,'; nls-config
after (=end of generated script): commit; (when table inserts are used and no ddl-statement is following; otherwise you have to use 'commit' in each table-script; After the last table create (ddl-) statement there is no implicit 'commit')
I know, that I can edit the generated script to add my statements, but if you often generate code there is a good change to forget to change the script afterwards.

Hi,
You can submit any feature requests at Oracle SQL Developer Exchange - https://apex.oracle.com/pls/apex/f?p=43135:1:2266866887402592:::::

Your "suggestions for future features" is broken??!!

I really just wanted to leave you a suggestion for future features. Your system took me to a page that said i needed to be on the most recent version but alas I am! You even tell me so when I go to firefox.com! Hmmmm...... a little problem there.
Regardless, here is the feature suggestion i wish to make:
You've done a fine job of cleaning up the top bar in 4.0 to make the most of new widescreen displays so that we have more space for the page content vs. the browser stuff. The deal is, virtually all sites still use only about a third of the page width leaving tons of wasted space on a full screen view. Why don't you offer a way to move all the browser navigation, tabs, and tools wherever i prefer - like running vertically down the left or right side of the massively empty pages i see on my 24" monitor and even my little 11" laptop monitor?

You can leave your feedback/suggestion at this link: Apple Product Feedback

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it. I just need to move it out of the way to modify other portions of the document.
thanks,
C

Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

Any updates and/or patches for Aperture 3.2?

Just wondering if there are any updates and/or patches for Aperture 3.2. Especially for "Detect Edges" mode.

Hi
I don't know if it solves your problem, but version 3.2.1 has been released on last Thursday. You could update and try it.
Regards, Michael

Some Bugs and Enhancement Suggestions for Offline DB models

I really like the way that this area of JDeveloper is shaping up, but I have a couple of bugs and few suggestions for enhancements.
Bugs,
1) when adding an index to a table, you can't edit the index name. If the generated name is too long, it doesn't allow you to create the index.
2) When adding columns to an index, there is no LOV of columns so you have to manually type each one. It always defaults to the ?first column of the primary key? which seems odd.
A few enhancement suggestions:
1) on tables and columns it would be very helpful to be able to also have a logical name as well as a physical name
2) if we have a logical name, it would be then very helpful to be able to set the display properties to show the logical vs. physical table and column names
3) Tablespace objects. I would be okay if they were just the logical object (not necessarily generate DDL to create them). If I could use them as part of the table and index definitions.
4) Table partitioning.
5) Packages on a DB Diagram. Just for the documentation purpose of visually displaying all objects in an application.
6) Ability to create views based on synonyms. Currently, it only allows to pick a table or view.
Just a few items that I have encountered trying to design a full application in JDeveloper.
Thanks,
Gary

Gary,
thanks. I filed the enhancement request and bug based on your description
Frank

My iPhone 4s has the latest OS update and this morning for no reason all my contacts have disappeared. Is there a fix or reason for this?

My iPhone 4s has the latest OS update and this morning for no reason all my contacts have disappeared. Is there a fix or reason for this?

After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

Solutions and/or suggestions for documenting ADF Faces projects

Hello everybody,
does anyone have solutions and/or suggestions for documenting ADF Faces projects? For C, C++, C#, PHP and Java projects we use Doxygen, but what to use für ADF Faces projects?
Thank you in advance for your tips!

Hello everybody,
does anyone have solutions and/or suggestions for documenting ADF Faces projects? For C, C++, C#, PHP and Java projects we use Doxygen, but what to use für ADF Faces projects?
Thank you in advance for your tips!

Design and Testing Suggestions for Different Screen Resolutions

Intermediate Dreamweaver CS3 user, in need of "Design and Testing Suggestions for Different Screen Resolutions".
Thank you, J. Chavez

Adobe Browser Labb and BrowserShots.org

HT201363 my ipad went on update and now asking for passcode which i don't know

my ipad went on update and now asking for passcode whcih i don't know what should i do now to start operating

Hey sunny1008,
Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M.

HT1386 My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop and those are the songs I purchased via iTunes. How do I get the rest of the songs from iPhon

My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my iPhone back onto my HD.
The songs I'm not able to import casme from CD's. Nothing from napster etc.
I've tried and tried to import them rom iTunes vis "Library" " Import"

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
It might have happened when I was accessing my camera bypassing the lock screen!
All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

EA6900 Update and Two Suggestions for Future Firmware "Nice to Haves"

Similar Messages

Maybe you are looking for