EA6900 - Upgraded to latest firmware now can't login to router

Upgraded EA6900 to latest firmware (11629 I believe). Now unable to login to router using either mylocal.router or linksyssmartwifi.com. Continues to pop up message that setup not complete. I repeat the steps to reset the router to factory settings and end up in same spot. I've tried the procedure connected wired to the router and wirelss to the router. I can login to router using smartwifi app on iPad however. Wireless connection still works as devices can connect. I'm stumbed.

Try clearing you browser's history and temporary files. Also restart the computer just in case.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

After upgrade to latest firmware canon network printer won't print

after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system): 1.73f63.
Any help gratefully received.

First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none. But stranger things have happened now that we have Lion. Within the application are you selecting the wireless printer........just had to check.
I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011). I too have the latest firmware and software......without problems printing.
A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions. Then add the wireless printer back, and see if it works. If not.....power OFF the printer and turn back on.
If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable.
Keep me updated and I'll tyr and help!

8520 Upgraded to OS 6, now can't turn on GPS or Location

My 8520 Upgraded to OS 6, now can't turn on GPS or Location. Poynt and other Aps were working and would find current location, but this stopped. The GPS and location options won't let me change them.

SamRichards wrote:
I know it sounds unbelievable but it is true.
if you have installed OS6 on your 8520, then it can only be a pirate OS.
RIM as never published OS6 for that model.
I strongly advise you to uninstall it. Who knows what is in your device right now ! a program to spy on you and track your conversation, a program that will log all your passwords, a program that will take pictures without you knowing, and so on.
SamRichards wrote:
When i go to Options\advanced options\location settings, GPS Data Source is set to "None" and i cannot change it, Location services are set to Location Off, and I cannot change that either.
yes that is to be expected, because the 8520 does not have a GPS antenna. The behavior you are stating is the same for all 8520 models in the world.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
I know that Acrobat, full version, 10 works with Lion...use it myself.

Upgraded to maverick and now can't open excel projects

I recently upgraded to maverick and now can't go back to open excel spreadsheets I need for my business. I've even changed the permissions and I can only preview, not modify. Any suggestions?

Was just having this issue with my wife's computer after upgrading to Mavericks. Maybe a long shot, but if your filenames have forward slashes in them (such as for dates), change them to backslashes. No idea why but it works. I seem to recall having the same problem with Excel some time in the past and this was the solution then too.

Upgraded to lion but now can not run parallel desktop.

upgraded to lion but now can not run parallel desktop. The message show can not load parallel drivers.
Anyone can solve it?

Do you have Parallels Desktop 6? That is the version you need to have it run under Lion.

Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber.

Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.

Hey jamesarm97 & diegofoto,
On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks,
Matt M.

Upgraded to Tiger and now can't open any illustrator files! Please help me!

I upgraded my OS to Tiger and then updated to 10.4.8 and now can't get any of my Illustrator EPS files to open. I have spent the whole day trying to figure this one out (Launch Services advice in other posts) without any luck. What is going on here?!!! I have so much serious work to get done this weekend!
Please help me!
Amy

It's hard for anyone to offer any advice when you don't tell us what specifically is happening or not happening. Is there an error message? If so, what does it say? What version of Illustrator are you using? Does Illustrator open at all? Does it open regular Illustrator files? Have you reinstalled Illustrator?

Upgraded to Yosemite and now can't print wirelessly

Upgraded my 1yr old Mac Pro to Yosemite and now can't print wirelessly to my Epson XP-405 through my wireless home hub! I've tried re-installing new printer drivers etc, throwing away preferences etc... these sometimes work for a single print then goes back to "Printer can't be found". My older iMac doesn't seem to have this problem (yet - fingers crossed!) and prints ok on exactly the same wireless network.
Any suggestions gratefully received.

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Network Printer Troubleshooting
If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.

Hi, am using Joomla 1.7.3 - FF upgraded yesterday to 9.0.1. Now can't login to front end. OK on other browsers. Worryingly, uninstalled and downloaded FF 8 and still can't log in - please help

Can't login to the front end of my Joomla installation. Backend is still OK at the moment. Have tried different accounts and re-setting passwords etc. and it's not that. Just keeps returning me to the login page.

wonder wrote:
vic wrote:
wonder wrote:what's your user id?
when asked for uuid/uid?... I put 100. I thought any random number would do...
look in /etc/pam.d/gdm-password
in arch and in general >= 1000 are normal users, < 1000 system users
is that how it works? can i change it from 100 to 1000 or just make a new one?
anyways i'll look to it.

OAM 11g: Deleted IAMSUITEAGENT by accident and now can't login to oamconsole - help!

Hi everyone - I've deleted the IAMSUITEAGENT suite from security realm --> myrealm --> providers within the weblogic OAM admin console (hostname:port/console) and now can't log into the oamconsole (hostname:port/oamconsole). When I enter the username and password into the oamconsole login page, the page just refreshes - is there anything I can do to reinstall it?

"There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact you support personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Upgrade to 2.6.37 can't login anymore

Dear friends,
after upgrade to newest kernel I can no longer login to my machine! Not even from the console. I can see the login promt, but after entering (any) username, it drops back to the same promt without asking for password. I booted off a rescue cd to read the logs, and the only strange thing I read in /var/log/auth file is: agety:[pid] can't exec /bin/login Exec format error.
If anyone? please
Girts

Yes, I forgot to add whats going on exactly in /var/log/auth.log when I try to login.
tail -f /mnt/custom/var/log/auth.log
Feb 1 17:55:57 dell agetty[3327]: tty1: can't exec /bin/login: Exec format error
Feb 1 17:56:25 dell agetty[4279]: tty1: can't exec /bin/login: Exec format error
Feb 1 17:56:47 dell agetty[3332]: tty6: can't exec /bin/login: Exec format error
Feb 1 17:56:54 dell agetty[4284]: tty1: can't exec /bin/login: Exec format error
Feb 1 17:59:05 dell agetty[3272]: tty1: can't exec /bin/login: Exec format error
Feb 1 18:01:40 dell agetty[3297]: tty1: can't exec /bin/login: Exec format error
Feb 1 19:12:54 dell agetty[3314]: tty1: can't exec /bin/login: Exec format error
Feb 5 17:56:13 dell agetty[3298]: tty1: can't exec /bin/login: Exec format error
Feb 5 17:58:15 dell agetty[4247]: tty1: can't exec /bin/login: ExecFeb 6 14:18:56 dell agetty[3306]: tty1: can't exec /bin/login: Exec format error
Feb 6 14:19:54 dell agetty[3308]: tty3: can't exec /bin/login: Exec format error

Username changed, now can't login to wiki site

We have our 10.9 server bind via dual directory. Recently a user got married and we changed their username in AD. This shows up in the server app as the married name and everything looks fine. The problem is the person can no longer login to wiki site. They get the incorrect username or password error. They can not login with their old username either. Has anyone run into this?
Tim

Server uninstalled, topic closed

Net down, can't login to router, lights normal on 2nd pc (1st works fine)

I have had a PC installed with FIOS and working perfectly (wire connection, windows xp, m1424-wr router). I have brought in a newer upgrade PC tower (vista 64 home) that has had internet working fine just recently, but cannot get it to work with FIOS and my router. I do not run both PC's at once, just one at a time and will replace the other one once this is setup (one monitor). I have an IP address assigned and packets are sent and received, but I cannot access the web or even login to my router (manually or using FIOS's wizard software). It is set to auto obtain an address and DNS. I can log into the router on the old computer that works, and using the same login/password combo on the 2nd computer it fails. I am using the same cable, and all lights on the router and the pc NIC are on. Safe mode with networking provides no change
Any ideas what the problem is? The computer has been working on another network just fine a day before I tried setting it up at a new location with FIOS, but it seems like it is rejecting the connection somehow.
Message Edited by Jay814 on 08-01-2009 08:52 AM

I have an IP address assigned and packets are sent and received, but I cannot access the web or even login to my router (manually or using FIOS's wizard software). It is set to auto obtain an address and DNS. I can log into the router on the old computer that works, and using the same login/password combo on the 2nd computer it fails. I am using the same cable, and all lights on the router and the pc NIC are on. Safe mode with networking provides no change
This is an interesting one. Let me see if I understand your post correctly. You see that the new computer is assigned a proper address on the network, and you are able to view the router login page from the new computer. However, entering the router logn/password from the new computer fails to access the router, and you do not have access to the internet. Is that correct?
If so, when you try logging in to the router from the new PC, how exactly does it fail? What is displayed on your screen?

Can't login to router web interface anymore (Authentication Required fails)

After upgrading to Firefox 9.0.1 (or another recent version), I can't login to the web interface of my router anymore, even though I can login with other browsers.
I've tried to login to 192.168.1.1 using Firefox 9.0.1 and my saved credentials (admin/********), but the authentication pop-up just showed up again. The same thing happened when I manually entered the same information. Using safe mode and/or private browsing didn't help either.
To be sure that is was a problem with the Firefox browser, I wrote the address, login and password in a text file, then copied-&-pasted the information into both Firefox and Google Chrome. The result: after repeating this a couple of times, it always worked on Chrome and never on Firefox.
The login process used to work flawlessly with previous versions of the browser, but I'm not sure if the problem appeared on 9.0.1 or the version before.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

EA6900 - Upgraded to latest firmware now can't login to router

Similar Messages

Maybe you are looking for