EAC and IMAP Issues after Exchange 2013 CU6

After deploying CU6 to Exchange servers there is no way to perform activities on Exchange Online (cosidering hybrid deployment). I noticed that there is a fix for it in http://support.microsoft.com/kb/2997355 but
it seems that it doesn’t do the trick. After installing CU6 file which is altered in the script cannot be found (RemoteDomains.xaml).
Also after installing CU6 I've noticed issue with IMAP and Thunderbird. It seems that commands like move are interpreted by the server as bad commands (error 12).
Did you encounter with any of those problems? Do you have/recommend any workaround or fix?

No, Exchange is in default direcotry. I've even tried v2 of script which gets Exchange path from registry.
This file does not exist (I've looked on both CAS na MDBs)

Similar Messages

Large ETLTraces files after Exchange 2013 CU6

After installing Exchange 2013 CU6, you may notice the Exchange Drive is consumed a lot than before and the size is increasing rapidly. After troubleshooting, you may find everything is running properly and
there is no issues with your Exchange Server.
Then you need to check whether the files in the following location is the root cause:
C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\logfie
C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\Diagnostics\ETLTraces
(You may find log files like “DocumentProcessingTrace_XX.etl )
Prior to CU6, there is not ETLTrace folder listed in this location and there are log folders however the log file has files no exceeding 7 MB size.
Post upgrade, there comes the ETLTrace folder and the files in this folder are close to 50 MB and the log files folder have log files exceeding 50 MB size.
This is a designed behavior in Exchange CU6, if you have limited hard drive space, as a workaround solution, we can safely remove or move the location of these lo files:
Before doing the changes, please firstly stop the health monitoring service. To Change the Log File Path, the Registry Key value is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Search Foundation for Exchange\Diagnostics
To Change the ETLTrace path the registry Value is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

@Simon_Wu, I tried your solution. However after a couple of days the logs were moved back to the original, default location. It looks like the server has a process which checks for hacks and undoes any attempts to change the path.
Interestingly the altered Registry entries remained altered, however the files were switched back to the default location. It generates just over 1Gb of logs per day on a largely idling Exchange 2013 CU7 server with 350 mailboxes.
Go figure!
What I found to work consistently and reliably is to replace default folders with junction points to another folder on another drive.
I also found that these files are created by a process which runs under the System process (PID 4), therefore you'll need to restart the server in Safe Mode to replace the default folders with junction points.

Exchange 2013 SP1 Object is corrupted and inconsistent state after Lync 2013 Installation

Hi Fellows,
I am facing an issue with Exchange 2013 SP1 (5.0.847.32)
environment. I recently installed Lync 2013 (version: 5.0.8308.0) a week ago and just recently start getting the below error when configuring delegation or modifying the users/groups from Exchange Control Panel:
"The Object <object DN> has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control defines the ObjectType <object guid> that can't be resolved.."
I can see some forum threads with same issue (links given below) but unable to find if this is a known issue and how to get it resolved. Need assistance if anyone has faced same and could help me out to figure it.
http://social.technet.microsoft.com/Forums/exchange/en-US/72310530-d1de-4b39-a0fb-1592247df03f/access-control-entry-issue-after-installing-lync-2013-into-the-forest?forum=exchangesvrdeploy
http://www.networksteve.com/exchange/topic.php/Issue_with_exchange_2013_lync_2013_intergration/?TopicId=37192&Posts=2
J.A

Hi
Usually the affected SID objects are referring to deleted objects.
Use the PsGetSid tool to try to resolve them.

Cannot edit/create new mailbox in ECP - Exchange 2013 CU6

Hello, I am currently running Exchange 2013 CU6. I cannot perform tasks related to recipients such as edit/create new mailbox. Additionally I cannot view the properties of the virtual directories.
I tried multiple browsers (Chrome, Firefox, IE) in different PCs and the result is the same
For example, I cannot click "Browse" in "new user mailbox" tab
"New local Mailbox move" page displays blank
I browsed through the event logs and found the following errors (Event 4 and Event 21):
Event 4
Current user: 'Unauthenticated'
Request for URL 'https://mailserver.address..com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address..capcx.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. --->
System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at
System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
completedSynchronously)
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at
System.Web.HttpApplication.ExecuteStep(IExecutionStepstep, Boolean&
completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
resources file.
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager'
could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
IsGlobalSnapshot: True
Event 21
Current user: 'Unauthenticated'
Script request for URL 'https://mailserver.address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US(https://mailserver.address.com/ecp/15.0.995.28/scripts/js.axd?resources=NewMigrationBatch&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException:
The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script
resources file.
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
   at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager'
could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance,
False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration,
True],[Eac.AllowRemoteOnboardingMovesOnly, False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging,
True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch,
False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups,
False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions,
False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy, False],[Eac.UnlistedServices,
False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],],
IsGlobalSnapshot: True
Any help?

Hello Amy,
I will try to follow your suggestions. I will update once I get access to the server.
Anyways, the whole thing was back to normal for 1 day on its own, but right now the issue is happening again. Permission-wise, the account I used is in listed Organization Management role
Update: I forgot to try the EMS, but after I recycle the
MSExchangeECPAppPool, everything works fine, except for viewing Groups and Permissions
An error in the event viewer is displayed:
Current user: 'Unauthenticated'
Script request for URL 'https://address.com:444/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US(https://address.com/ecp/15.0.995.28/scripts/js.axd?resources=EditRoleAssignmentPolicy&v=15.0.995.28&c=en-US)'
failed with the following error:
Microsoft.Exchange.Management.ControlPanel.BadRequestException: The request sent by your browser was not valid. ---> System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
at Microsoft.Exchange.Management.ControlPanel.CombineScriptsHandler.ProcessRequest(HttpContext context)
System.Exception: 'ToolkitScriptManager' could not generate combined script resources file.
Flight info: Features:[[Global.DistributedKeyManagement, False],[Global.GlobalCriminalCompliance, False],[Global.MultiTenancy, False],[Global.WindowsLiveID, False],[Eac.AllowMailboxArchiveOnlyMigration, True],[Eac.AllowRemoteOnboardingMovesOnly,
False],[Eac.BulkPermissionAddRemove, True],[Eac.CmdletLogging, True],[Eac.CrossPremiseMigration, False],[Eac.DiscoveryDocIdHint, False],[Eac.DiscoveryPFSearch, False],[Eac.DiscoverySearchStats, False],[Eac.DlpFingerprint, False],[Eac.EACClientAccessRulesEnabled,
False],[Eac.GeminiShell, False],[Eac.ManageMailboxAuditing, False],[Eac.ModernGroups, False],[Eac.Office365DIcon, False],[Eac.RemoteDomain, False],[Eac.UCCAuditReports, False],[Eac.UCCPermissions, False],[Eac.UnifiedComplianceCenter, False],[Eac.UnifiedPolicy,
False],[Eac.UnlistedServices, False],], Flights:[], Constraints:[[MACHINE, SERVER-NAME],[MODE, ENTERPRISE],[PROCESS, W3WP],], IsGlobalSnapshot: True
However, after a while, things are back to normal... I don't understand what's happening..

MS KB3011140 breaks information store in Exchange 2013 CU6

Hello,
Last night Microsoft KB 3011140 was inadvertently installed on our Exchange 2013 CU6 server. I just want to warn everyone that you should be very cautious with this update. Upon reboot, the information store would crash, recover, then crash and
recover, infintly. End user symptoms are the pop up bubble in the lower right regarding Outlook lost connectivity to Exchange server, then a few minutes later Outlook restored connectivity to Exchange, rinse and repeat.
This constant up and down would cause many freezes and slowness in Outlook. The last time we had this issue was when we went to CU6. Microsoft tech support though free of charge installed a patch Exchange2013-KB2997209_2997847-x64.en.msp and
that fixed our problem. They left the patch for us, so I thought I would try to re-run this. It progressed for awhile and then rolled back saying it encountered an unexpected error (what else is new?).
So I removed KB 3011140 which took about 35 minutes to do and upon reboot Exchange is back up and running.
The only side effect I am noticing today is Lync 2013 is asking for Exchange credentials and EWS Internal / EWS External URI's are not populated, however I have no issues reading my conversation history and calendar in Lync. I need to reboot my machine
yet but other people have started reporting the same thing.

Hi KJSTech1,
Thanks for your generous sharing and glad to know it works after recycling the MSExchangeServicesAppPool.
It's really hard to say why the patch cause this issue, since I didn't find someothers has the same issue. Thanks for your reporting.
Thanks
Mavis Huang
TechNet Community Support

Exchange 2013 CU6 Event ID 4999

After installing CU6 on the exchange 2013 mailbox server we keep getting the below event error message
Log Name:      Application
Source:        MSExchange Common
Date:          10/2/2014 1:06:25 PM
Event ID:      4999
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Watson report about to be sent for process id: 30632, with parameters: E12, c-RTL-AMD64, 15.00.0995.029, M.E.RpcClientAccess.Service, M.E.Data.ApplicationLogic, M.E.D.A.U.HttpPhotoRequestBuilder.Build, System.NotSupportedException, 4e29, 15.00.0995.027.
ErrorReportingEnabled: True
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="MSExchange Common" />
    <EventID Qualifiers="16388">4999</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-02T20:06:25.000000000Z" />
    <EventRecordID>7826297</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security />
</System>
<EventData>
    <Data>30632</Data>
    <Data>E12</Data>
    <Data>c-RTL-AMD64</Data>
    <Data>15.00.0995.029</Data>
    <Data>M.E.RpcClientAccess.Service</Data>
    <Data>M.E.Data.ApplicationLogic</Data>
    <Data>M.E.D.A.U.HttpPhotoRequestBuilder.Build</Data>
    <Data>System.NotSupportedException</Data>
    <Data>4e29</Data>
    <Data>15.00.0995.027</Data>
    <Data>True</Data>
    <Data>False</Data>
    <Data>Microsoft.Exchange.RpcClientAccess.Service</Data>
    <Data>
    </Data>
</EventData>
</Event>
Services seem to be fine but i do have a group of users that complain that their outlook 2013 email clients will go non-responsive a few times a days. Wondering if this is related. Also this error is appearing every few minutes. Anyone else experiencing
this?

Hi,
I would like to add some information to this, in case others are facing the same circumstance. I too received the same errors on my Exchange 2013 CU5 and CU6 servers mentioned above. I ended up calling Microsoft Premiere support because there was a very
large impact in our environment as we had Outlook 2010 clients that were having Exchange 2013 connectivity issues. Long story short, since Outlook 2010 was trying to use RPC to connect to the Exchange 2013 servers and in the Event Viewer we were seeing the
4999 Event ID multiple times per minute, RPC was crashing on the Exchange servers resulting in client connectivity issues.
Microsoft ran a ProcDump on the PID for RPC crash and basically came back with nothing only saying that it was a result of someone uploading a picture via Lync that was either corrupt or too large cause the photo store to crash the RPC Service. They also
were firm in saying that this should have no impact. I was not convinced because this happened after installing CU5 and the client connectivity issues also appeared in conjunction with these 4999 RPC errors. In my mind that is a bug and I asked that something
be published to address this as it seems silly that one user uploading a Lync profile picture could cripple our environment.
You would need to navigate to the following location to see this Photo Store. (D:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\photos) Change the path to point to your local Exchange install instance. Most of the files in my location are 0K but
there are a few that are 4K so it seems they are not large enough to affect anything. We have 4 CAS+MBX servers so I looked at all 4 servers.
What I ended up doing to resolve the 4999 event ID which actually ended up fixing my client connectivity issues also was to edit the following file. "D:\Program Files\Microsoft\Exchange Server\V15\Bin\Microsoft.Exchange.RpcClientAccess.Service.exe.config"
Back the above file up and when you open it scroll about 3/4 to 7/8 of the way down and find the following lines:
    
    <add key="HDPhotoEnabled" value="true" />
Set the line to "false" like so:
    
    <add key="HDPhotoEnabled" value="false" />
Then restart the Microsoft Exchange RPC Client Access service and refresh the Event Viewer and the 4999 errors should stop and client connectivity should be restored.
I noticed this error with CU5 and then subsequently after I installed CU6, so I had to perform this change after I installed CU6 and probably do the same once CU7 comes out. I do not know the adverse effects of making this change as Microsoft really could
not explain more than what I wrote above, but I had to get Outlook connectivity restored and this was my only option. It appears that Lync 2010 photos and Outlook 2010 photos stayed intact so no users were complaining that their self-uploaded profile pictures
were gone. We never had this problem with Outlook 2013 SP1 as we have MAPI enabled and the crashing RPC service would not have effected those clients. OWA was also working just fine.
Hopefully Microsoft can offer me more of an explanation as I ended up fixing my own issue but I raised concern with how this happened. I hope this helps someone else as it helped me.
Thanks.
Alan

DC Restart when start installing Exchange 2013 CU6

I have a domain installed on windows server 2012 R2 with function level 2008 R2 and when i try to install "as a administrator" Update for exchange 2013 CU6 or CU5 DC restart and am facing this error :
Error:
The following error was generated when "$error.Clear();
install-CannedAddressLists -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Data.Directory.ADTransientException: Failed to reconnect to Active Directory server Make sure the server is available, and that you have used the correct credentials. ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryServerDownException:
Active Directory server is not available. Please retry at a later time.
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnectionFromPool(ConnectionPoolType connectionPoolType, ADObjectId domain, String serverName, Int32 port, Boolean& serverConnectionPresentButDownOrDisconnected)
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, ADObjectId domain, String serverName, Int32 port, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, NetworkCredential networkCredential, String serverName, Int32 port)
at Microsoft.Exchange.Data.Directory.ADDataSession.GetConnection(String preferredServer, Boolean isWriteOperation, String optionalBaseDN, ADObjectId& rootId, ADScope scope)
at Microsoft.Exchange.Data.Directory.ADDataSession.GetWritableConnection(String preferredServer, ADObjectId identity, ADRawEntry scopeDeterimingObject)
I already prepare AD and Schema before start install
Please Advice Thanks

Hi Midoooz
Thank you for your question.
Do you install the Exchange Server on the DC?
From you posted error, I think you can try to make your exchange server in maintenance mode, then you can try install exchange CU6.
You can refer to the following link:
http://support2.microsoft.com/kb/2713696
Note:
Stop Maintenance Mode on the computer that is running Exchange Server after the Exchange Server 2013 CU6 upgrade is completed.
If there are any questions, please let me know.
Best Regard,
Jim

Exchange 2013 CU6 event id 1003

Installed cu6, after that OWA and ECP stopped to work, with a redirection loop, when I check my eventlogs I see thousands of this error message:
RpcHttp] An internal server error occurred. The unhandled exception was: System.MissingMethodException: Method not found: 'System.String Microsoft.Exchange.Security.Authentication.IIdentityExtensions.GetSafeName(System.Security.Principal.IIdentity)'.
at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClasse.<OnEndRequest>b__d()
at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
Cant find a workaround, anyone else seen this error?

Maybe this can help someone.
v
Replaced SharedWebConfig files under the location "V15\FrontEnd\HttpProxy"
v
Added the missing permission on Exchange Back End Web Site by comparing the same with our lab
v
On IIS
è Exchange Back End
è Changed Physical Path
è it to "V15\ClientAccess"
v
Still after which we couldn’t browse OWA under Exchange Back End using Port 444 but found that ECP works fine
v
Replaced the SharedWebConfig file from working Exchange 2013 CU6 under the location "V15\ClientAccess"
v
Ran IISReset
v
Confirmed that OWA and other virtual directories as well started working fine without any issues

Exchange 2013 CU6 migration batch

Hello
After install exchange 2013 cu6 server to root domain in multiple domain environment I cant move mailbox from exchange 2007 to new server because migration batch search mailbox only root domain controller.
ADTopology list all child domain dc without error.
setup /ps and /pad run without error.
but new-moverequest working.
please help.
Udvozlettel:Sneff Gabor

Hi
It might be a bug in the GUI as powershell is working. Did you also update exchange 2007 to its latest rollup?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Exchange 2013 CU6 installation hangs on step 9: Languages

Just had Exchange 2013 CU6 update hang on Step 9 of 18: Languages. It was stuck at 0% for almost an hour. I was able to get it moving forward by disabling SCEP 2012 by killing the process and deselecting check certificate for server certificate
revocation in IE. Both steps were taken nearly simultaneously and the install process for Exchange jumped up immediately. Both steps were taken based on info from:
https://social.technet.microsoft.com/Forums/exchange/en-US/2a346a37-d092-4189-8a07-e8a9971925f1/cu2-installation-hangs-on-step-9-languages?forum=exchangesvrdeploy
and
https://social.technet.microsoft.com/Forums/exchange/en-US/0975bb5e-f270-4e39-abf3-70809cd98161/exchange-2010-sp3-installation-hangs-language-pack-hell
Just wanted to post that this issue was encountered on CU6 as well. Has anyone had a similar experience or able to tell which of these two steps (or both) is actually needed?

Hello,
Thanks a lot for sharing, saved my day!
Cheers:)

Weird emails showing in Outlook 2013 Inbox after Exchange 2013 PST Import

Hi there,
I've just done an Import PST from Exchange 2013 using the GUI, and when it is finished, I then open Outlook 2013 I am seeing a few strange emails in the Inbox.
The PST's were from Outlook 2007, and were previously used in with POP mail.
The message is like this:
Subject: Undeliverable: Not read: RE: Re: information
Your message did not reach some or all of the intended recipients.
Subject: Not read: RE: Re: information
Sent: 20/04/2014 11:08 p.m.
The following recipient(s) cannot be reached:
Big John on 20/04/2014 11:11 p.m.
Diagnostic code = MailRecipientUnknown; Reason code = TransferImpossible; Status code = 511
< #5.1.1 smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found>
The date and time of the message is during the import process.
Does anyone have any suggestions?
From a PST of around 8GB, I ended up with about 50 of these type of messages, mostly to the same recipients, but there were some different ones. From a mailbox of about 3GB, I got about 5 of these messages. From the smaller mailboxes I got none.
Thanks in advance,
Steve.

Hi Steve,
Please verify whether this issue occur in OWA.
If everything is OK in OWA, it seems the .pst import completed successfully. Let's perform troubleshooting on the Outlook client side.
1. Please run Outlook under the safe mode to avoid some AVs and add-ins.
2. Please try to re-create profile to refresh the caches.
3. Please also check whether the missing messages in others' folders or subfolders.
I want to know that why you exported to .pst from Outlook 2007 and imported it into Exchange 2013. Did you migrated Exchange server from 2007/2010 to 2013?
If it is the case, I suggest moving mailbox from Exchange 2007/2010 to Exchange 2013.
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Cannot disable a mailbox in Exchange 2013 CU6!?!?!?!

I cannot disable a mailbox in Exchange 2013 CU6. I get the following error:
Anyone seen this error? As you know, I just want to remove the Exchange attributes from the user object in Active Directory. Of course, deleting the user object works just fine but don't want to go that route.

I tried with the EMS (Powershell) and I still get an error:
[PS] C:\>disable-mailbox [email protected]
Confirm
Are you sure you want to perform this action?
Disabling mailbox "[email protected]" will remove the Exchange properties from the Active Directory user object and mark the mailbox in the database for removal. If the mailbox has an archive or remote archive, the archive will also
be
marked for removal. In the case of remote archives, this action is permanent. You can't reconnect this user to the remote archive again.
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):
Y
Active Directory operation failed on LocalDCName.local.com. This error is not retriable. Additional information: The parameter is incorrect.
Active directory response: 00000057: LdapErr: DSID-0C090CB9, comment: Error in attribute conversion operation, data 0, v2580
+ CategoryInfo : NotSpecified: (:) [Disable-Mailbox], ADOperationException
+ FullyQualifiedErrorId : [Server=LA-MBX01Server,RequestId=6ed97c1e-ae68-4670-a097-c4e65f683274,TimeStamp=11/18/2014 7:50:07 PM] [FailureCategory=Cmdlet-ADOperationException] 8D6C0FEB,Microsoft.Exchange.Management.RecipientTasks.Disable
Mailbox
+ PSComputerName : LocalDCName.local.com
I captured everything with the START-TRANSCRIPT cmdlet and changed the specific values to our organization (i.e., "[email protected]" and "LocalDCName.Local.com"). I've tried this on other mailboxes and I receive the same error whether
I use EMC or EMS. I believe this might be AD schema related just not sure where.

Throttling policy not working on Exchange 2013 CU6

Hi,
We have a test throttling policy to restrict a mailbox to send at most 2 messages
per minute in our live Exchange 2013 CU6 enviroment. It was associated to a test mailbox. We have separated installed 2 mailboxe and 2 cas server roles in our enviroment. I have checked latest CU-s (7 & 8) but these are
not fixing any related bugs.
We tried lots of workaround (see below list) and solutions to fix this but it is still not working with outlook MAPI and OWA client.
Throttling policy not working
smtp service restart
RPC Client Acces service restart
The policy details:
Get-ThrottlingPolicy low_rate_limit |fl *limit*
MessageRateLimit : 2
RecipientRateLimit : 1000
Get-mailbox [email protected] | fl ThrottlingPolicy
ThrottlingPolicy : low_rate_limit
Do you have any idea what is the problem?
Thank you in advance.
br,
Zoltan

Hi Zoltan,
Base on my research, you need to configure the MessageRateLimit parameter on receive connector also.
The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is
unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of
unlimited.
https://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

HTTP 500 ERROR AFTER EXCHANGE 2013 SP1 INSTALL

Help after exchange 2013 sp1 new install unable to get to the ECP or OWA page with HTTP 500 error in IE the install went ok but not sure what can be causing the error any help would be appriciated.
EXCHANGE 2013--SP1 on WIN2K12--R2 Standard
TY
M4326

See the following:
http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
CK

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

EAC and IMAP Issues after Exchange 2013 CU6

Similar Messages

Maybe you are looking for