Each time I get a new voicemail message, I have to restart the phone.
I receive alert on home screen stating missed call & voicemail. In voicemail, the new message has a filled in blue circle at start of message (on the left). When I press on entry, a blue "play" symbols appears in place of the blue circle and the the green call back and red delete buttons are lit. However when I press the entry, nothing! I have to restart the phone, wait for the message to come thru again. At this point, The "play" symbol is in front of the message, I press on it, the pause symbol appears while message plays. I have to do this for each voicemail that comes through. Anyone know what needs to be done to fix it? (P.S. previous messages in the list play fine before the restart, this gremlin affects the new messages only)
Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon
Similar Messages
-
I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.
Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon -
I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling the add on and plug in, but it is no longer installed as an add-on or plug in. How do I get the "new tab" request to simply open with a blank address in the address box instead of www.imesh.com.
Ok, I finally managed to get rid of it.
First I did the thing with the about:config but I flitered for imesh instead and managed to reset two thing but when I got to the keyword.URL I got the same thing as lolbabe98 did with the "An attempt to change your search engine or homepage was blocked."
Then I did a search on my C: drive for iMesh and discovered some things that hadn't been removed even though I had unistalled both the toolbar and the actual program. After that it worked fine and I now have a regular "untitled" tab when I open a new tab.
One last thing, when I tried to remove some of the files there was one that said it was in use, it was called datamanagerUI or something rather. The only thing I had to do there was to open Task Manager and kill a process called DATAMN~1 and I was able to remove it. Hope this helps. -
I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avail. HELP
I had a similar issue and it was password case sensitive issue
-
so if i had lost my ipod, and i had bought the applecare for my ipod, do you think i would be able to get a new ipod since i have the applecare on it? or to get a new one would i have to give thee device in then get a new one?
Applecare has nothing to do with a lost or stolen device.
You would have to buy a new ipod. -
I have 2 email accounts. One account pushes correctly, the other does not. For the second account sometimes I have to restart the phone to get the emails. Both accounts are set to push.
Go into the email setting and click on advance and make sure it is on fetch not manual, let me know if this works.
Click on setting
Click mail,contacts, caendars
Click fetch new data
Scroll to advnace
Set to fetch -
Hi guys, i just got my iPhone 4s and sometimes the signal is lost and i have to restart the phone in order to get reception again. do you thing there is a problem with the phone or with the carrier? thanks
I have the exact same problem. Called my operator who told me it was a hardware issue and Apple is working on a fix...
-
Whenever i download files, many times it stops before downloading completely and i have to restart the process by visiting the site. Suppose the file is 20 mbs, but it downloads only 2-3 mbs, reports that download is complete, but its just a part of that.
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files -
Each time I send a message/iMessage it sends but then I do not receive a reply and the app freezes, deleting all my messages. Therefore, I have to restart the phone each time I send a message. I don't know how to stop this issue as it has happened on both the iPhone 4S and iPhone 5S.
If you used the latest backup after setting it up as new, try again, this time without using the backup, in case it contains corrupt data.
If still no luck, you'll have to get it checked by visiting an Authorized Appel Service Provider, Apple Store or by contacting Apple Support.
iPhone - Contact Support - Apple Support -
The hardware is an iPhone 4 on iOS 5.1.1 with a capacity of 16GB (14.0GB). Currently I have 1.8GB available memory. The phone has never been jailbroken and no external accessories have ever been attached to it.
The problem:
Some of the receivers of my text messages have recently told me that a number of my text messages are coming in a little jumbled up. Apparently the message I had just sent gets concatenated with a past message or various past messages. The order where the past message gets mixed is not always the same - sometimes it's in front of what I have typed and sometimes it's in the end but in all cases inserting the past message also deletes parts of the message I typed. Furthermore when checking the thread there seems to be nothing wrong and the messages are shown in the same way I have typed them rather than how the receiver got them.
The question:
I have tried to see if other users on the same carrier, from the same locations as myself had the same problems as myself on other systems. I have checked Symbian, BB, Android and the older type of non smart phones and I have found no one with this problem. This rules out the carrier completely.
I would like to know if this is a problem which requires intervention by Apple or if it something I can fix myself. I have reinstalled the iOS5.1.1 yesterday but the problem seems to stay. I have turned the phone off and on a couple of times but it was in vain. I have also turned the phone off by holding the home and the standby buttons, but the problem seems to stay.
Any help would be very appreciated. I do not find any objection if I have to take my phone back to the official seller but if it something I can handle myself I would save them the hassle.
Thank you in advance.
DanIts because you are sending them as iMessages and not SMS.
If you want to turn iMessage off, go to settings, messages and turn it off. -
I am trying to add a wireless printer to my MacBook Pro. It was working properly until we had to get a new modem. I have gone through the steps with the printer customer service rep, and it was working properly for one day. When I booted up the next morning, the printer was no longer "connected". It will work if I have the printer and computer connected, but I much prefer the wireless capability. Suggestions? The printer is a Brother MFC7860DW. The other laptop in the house (Dell) can print wirelessly so I don't think it's an issue with the modem or the printer.
Hello,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?
Disable your antivirus and firewall, and try again.
-
My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.
Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH. -
I have an IPhone 4 and each time I try to update to iOS 7.0.6 I receive an error message. I have gone through te update process about 3 times and each time I get message saying there was an error and it was unable to update.
What is the error message, and the error number specifically? You can look it up here: http://support.apple.com/kb/TS3694
-
I can't connect to bbc website in firefox. Each time I get the same message: "the connection was reset". Can anyone help?
I can connect http://www.bbc.co.uk/ & you may be interested in http://www.bbc.co.uk/iplayer/diagnostics
Is your problem with streaming audio broadcasts to and are you outside the UK ?
If so you may have fallen prey to the BBC's Content Distribution Network which often seems to produce problems they keep re-issuing advice such as:
*''Why am I having problems listening to BBC radio outside the UK, such as experiencing poor sound quality or the station is not working?25 May 2011 20:28'' [http://iplayerhelp.external.bbc.co.uk/help/outside_the_uk/radio_problems_international/ <-- this ]
Maybe you are looking for
-
Desktop not showing when switching between vc ?
Hi. I open the desktop in vc1 ( using startx ) then when I go to vc2 ( using ctrl + alt + f2 command) and come back to vc1 ( ctrl+alt+f1) , the desktop is not showing. No error but just not showing (terminal) , I have to terminate it and startx agai
-
How to completely remove WSUS on Windows 2012 R2?
Hello guys, I see plenty of details about clean up previous version of WSUS, but I cannot find any place with more advanced details about the latest one. Mostly, people advice to completely reinstall the system from scratch. Any clue? Cheers, Marek
-
Firefox gives me "Content Encoding Error" when trying to navigate through websites.
I have been having trouble when using Firefox. I am continually getting a "Content Encoding Error" when trying to go from my home page to another page or even just going from the main page of a website to link on that site. I can't access facebook, y
-
After I download some games free ,my ipod touch can not work ,even cannot open some programs .When I touch the screen ,it flash some seconds and come back to the main interface .what can I do about it ? such asQQ. Wedingand.etc.can't be opend . Thank
-
Most folders not updating from hotmail account
Recently installed Outlook 2013 as part of Office 2013 Pro. Have tried to set it up with my hotmail account. Only the Inbox, Sent Mail and Deleted Items folders sync. The remaining folders do not sync and display the message "We didn't find anything