Each time i install itunes - CD doesnt work when rebooted - HELP!

i installed itunes on my pc and found it easy to upload a cd to it and my ipod, however once i shut down my lap top - when i restart it the following day the cd drive is not working - running a diagnostic stated that there was no cd drvie! running windows media player states ' cd drive required' and when routing around on the pc it shows a big red cross next to the application called 'Driver' i have run the 'system restore' which removed itunes - and found that the drvier then worked - then reinstalled itunes which again worked - but once again once the laptop was rebooted the driver stopped working - does anyone know how to get around this problem as it is driving me nuts!

This just started happening to me too. Never had a problem before the last iTunes update. Its also disabled my built in memory card reader.
I have been keeping iTunes disabled and try not to use it unless I have to.

Similar Messages

My ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

my ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

Wow the customer service is even worse. Does Apple want me to go around jailbreaking my iPod now so I can use something that actually recognizes my product?

Just installed latest Itunes, and system now grinds to a halt, caused by apsdaemon.exe and apple mobile using 99% processing. Have stopped these processes, but each time I start Itunes I have to do it all over again, any help would be appreciated

Having just installed the latest iTunes update, I find my system grinds to a complete standstill. I've checked and found two apple processes, apsdaemon.exe and applemobiledeviceservice.exe use 90% plus of my processor, so have stopped these. However, each time I start iTunes the same situation occurs. Is there anyway I can remove these exes from my system or is apple aware of this stupid update and what are they doing about it. Any guidance would be very much appreciated

What version of itunes were you using before you updates?
Have you checked other related post?
iTtune will require applemobiledeviceservices.exe and others to run. What you are experencing is usually caused by a conflict with other software on you system. Everybodys system is set up differently, so there is not a "one fix all". Most commonly associated with Firefox addons, video accelerator software, podcasts on the backup, anivirus software, parential control software, take you pick!
I found my fix here.
https://support.apple.com/kb/TS4123

"Welcome to Itunes" each time I open itunes

Hi all,
Only recently, each time i open up itunes, I get a screen "Welcome to Itunes" and it wan't to take me through steps to set up my library and import songs etc. I don't want to do anything that might possibly cancel my music library, so I say "Cancel" but it keeps popping up each time I open itunes.
Any ideas?
Thanks,

Has anyone solved this "Welcome To iTunes" popup every time you start iTunes? I get it every time. I run Windows XP Pro, iTunes 8.0.2.20, iPod Classic 120GB firmware 2.0.1. I don't believe iTunes has updated itself once since I've installed it (just bought my iPod a month ago).
I tried the shortcut fix I've read all over the internet, about deleting the original shortcut and creating a new one, etc.. to no avail.
All I have to do is click "cancel" on the "Welcome to iTunes" popup when I start iTunes and I get into iTunes normally with all my settings/music intact, but it is just a pain in the but and if someone else comes and uses my PC and clicks through the wizard without clicking "cancel" I'd probably lose everything.
Please help... A couple hundred bucks dropped on this cool gadget and it should work...shouldn't it?

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

HT201485 why do I have to enter my Apple ID and Password several times each time I launch iTunes

Why do I have to enter my Apple ID and password several times to enable automatic downloads each time I launch iTunes? I get no password errors.
I've also notice that some secure websites, e.g., banks, tell me each time I log on to them that they don't recognize my computer. I don't know if that's related.
I use two different wifi networks each day, one work, one home
I am using OS X 10.10.1 on a macbook pro retina, mid 2012
2.6 ghz core i7 8GB,
iTunes 12.0.1.26

That seems strange. Try an iPad reset and see if this fixes the problem,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Each time I start iTunes, it configure again the program.

I'm running iTunes v7.6.2.9 with Windows Vista Ultimate 32bits and SP1. I reinstall iTunes, but it change nothing. Each time I start iTunes, the configure window appear.
I also have some problems with QuickTime. When I try to watch a movie, I get this error message: "Error 46: Could not load or find the QuickTime ActiveX control.
Thanks in advance for your help.

This seems to be caused by a bug in the Vista installer. Are you using the link on the Quick Launch toolbar? Try using the iTunes link in the main Start Menu and it should work OK. If not try opening the program from the *C:\Program Files\iTunes* folder. I simply replace the Quick Launch link with a freshly made shortut to the iTunes msin program. I then get caught out again after every iTunes upgrade....
tt2

I have a windows 7 64x SP1 and every time I install iTunes 12 I get this message when I try to ponen it:"This copy of Itunes is damaged and it has not been correctly installe. Please, install iTunes again.(-42404)". The instalation process runs smoot

I have a windows 7 64x SP1.
Every time I install iTunes 12 I get this message when I try to open it:"This copy of iTunes is damaged and it has not been correctly installed. Please, install iTunes again.(-42404)".
The instalation process runs smoothly without any error message and iTunes has been installed in my computer before. The problem started with the update no. 12. Any idea what's going on? Thank you

if itunes will not run, you probably have mangled windows badly
one feature of windows 8 is the refresh that saves libraries,
because you are using windows 7, you will need to backup all files to another storage device

I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

Do you experience the same issue on other WiFi networks?
Do any other iOS devices experience the same issue on your network?
Make sure you follow all steps provided in the article below:
iOS: Troubleshooting Wi-Fi networks and connections

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

My time capsule doesnt work when its conneted direct cable modem, and it start working from netgear router

I just bought a Airport Time Capsule, time capsule is connected direct from wan to cable modem (it doesnt work). when i connect it to lan port 1, it start working. normal process i know is from cable modem to wan port. 2nd i notice, network is on bridge mode. so my question is how do i make it to work from modem to wan port.

What model is the modem? Is it a pure cable modem or a combined modem router?
This maybe important as the current model TC does have issues with some of the popular cable modems.. SB6121 or 6141 being often the ones complained about here.
If it is a pure cable modem (most will have just one ethernet port). Then power down the modem for 20min. This allows enough time for the MAC address of the first device connected to be lost at the ISP end so it is ready for a new router.
The TC must be in dhcp and nat mode.
Please factory reset the TC and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
By default the TC is in router mode after a reset.
Restart the modem.
The power up the TC and run through the setup utility.
The TC should then be accepted as the main router in the network.
If this fails check the WAN ip address. If it is 10.x.x.x or some other private IP you did not turn off the cable modem for long enough.. Try again only this time leave it off longer. (Some ISP it is just 5min.. some 15.. some will require 60min or overnight).

Agreeing to licence agreement each time I start iTunes

I have to agree to the software license agreement each time I start itunes. Anyone know how to fix this? It also asks me to configure iTunes every time it opens.
Many thanks for any help anyone can give.

Im also Having the same problem.. anyone help?

My password on the itunes store doesnt work from my phone

My password on the app store and itunes store doesnt work from my phone but works on my computer. What am i doing wrong or what can i try differently?

make shure that you have the same user name on your phone and on the computer

HT201272 I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.

I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.

I have exactly the same trouble.
If you wet the answer, please let me know!!

Each time i install itunes - CD doesnt work when rebooted - HELP!

Similar Messages

Maybe you are looking for