EAGLE Layout Editor problems
Evening fellow archers
I have an x64 ed of arch, on an AMD64, 2gigs of ram.
I've downloaded the free version of eagle - ftp://ftp.cadsoft.de/eagle/program/5.4/ … -5.4.0.run
When I try to run it, the following error is given:
#:sudo ./eagle-lin-5.4.0.run
#:./eagle-lin-5.4.0.run: line 107: /tmp/eagle-setup.26114/eagle-5.4.0/bin/eagle: No such file or directory.
I've taken a sneekpeek @ the script, and @ line 107 we have:
"$TMPDIR/eagle-5.4.0/bin/eagle" --setup
I've also exported TMPDIR as a directory with chmod 777 and my own user ownership.
I've tried adding an extra argument - and the same error of no such file or dir does pop up while I try to start the binary.
I've got QT,WX and other dependencies installed. I may be missing something though, still I'd rather use eagle on arch than on windows 7.
cheers
Try installing it from AUR: http://aur.archlinux.org/packages.php?ID=15941 . This is how I installed it here.
(4) [renan@sanctuary:~]$ LC_ALL=C pacman -Qi eagle
Name : eagle
Version : 5.4.0-4
URL : http://www.cadsoft.de/
Licenses : custom
Groups : None
Provides : None
Depends On : lib32-gcc-libs lib32-libjpeg lib32-libpng lib32-libxcursor
lib32-libxft lib32-libxi lib32-libxrandr
Optional Deps : None
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 67456.00 K
Packager : Unknown Packager
Architecture : x86_64
Build Date : Wed Mar 18 16:15:14 2009
Install Date : Wed Mar 18 16:15:49 2009
Install Reason : Explicitly installed
Install Script : No
Description : A powerful suite for schematic capture and printed circuit
board design (aka eaglecad)
Last edited by Renan Birck (2009-03-31 19:33:30)
Similar Messages
-
Hello everybody,
i want to arrange content in a page. The question is how? A How-to-document i downloaded from SAP says you can just drag&drop the content. This does not work for me. I can highlight the content but i cant move it anywhere. Im on EP 6.0.9.0.0
regards,
MarkusHi Markus,
see my answer in the other forum.
I hope it helps,
Robert -
Problem in opening layout editor in adobe forms
Hi,
There is a problem in opening the layout editor in adobe forms(T.code SFP).
Eventhough I have installed Adobe livecycle designer 8.0 and adobe acrobat reader 9.0.
It is showing the error as " The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation".
Suggest Me.
Moderator message: please have a look in the dedicated forum for Adobe forms.
Edited by: Thomas Zloch on Jan 15, 2011 9:49 PMHI Jaydeep,
Thanks for reporting the issue. Is it possible for you to share the pdf , it is possible that the document is corrupt. You may share the pdf at [email protected]
Thanks,
-vaibhav -
Problem with Screen Painter - Graphical Layout Editor.
Hi Friends,
I have a strange problem with my Graphical Layout Editor. I first had the problem that the alphanumeric Editor gets displayed even the checkbox for Graphical Layout Editor is checked. Then I had gone through sdn forums and found that the <b>eumfcdll.dll</b> was missing.Thanks to sdn forums. When I copied that file into the path specified it worked fine. But the problem is my layout screen is not displayed fully. It is just displayed at the top of the window and only in that region I can drag and drop the elements. Remaining part of the window is uneditable.
what is the problem? Do I need to make any further settings?
Regards,
Raju.try to re-install GUI patch .
<b>Yeah , its like CNTLALTDEL(restart) , So half of the problems get resolved.</b>
regards
prabhu
Message was edited by: Prabhu Peram -
Facing problem with layout editor in screen painter .
Hi gurus,
I have installed IDES ECC 6.0 in my home system. Now when I go to layout editor in screen painter, I am getting rows in the screen. As per my knowledge there is an installation problem ..How to rectify that ? Could any one please tell me.
Thanks & Regards
Vardhansome times SAP Gui behaves like this, in my case i faced this problem many times, some times after shutdown my sap logon pad. and restart the sap , go to se51 , it will open the Screen painter normally. But some cases i uninstalled the Gui, and re installed .then only it opens properly. select all components when installing.
-
N4S: Web Dynpro for ABAP layout editor not working
Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja -
Crash dr watson in layout editor
I have an intermittent problem.
When I go in layout editor, I have often crash when I click on field. (Dr Watson) After one crash, I have always crash when I go to layout editor, I am not able to work in it without having the crash. After many manipulations in the form, I am able to go there, I don't know witch manupulation uncorrupt the form. Somebody had the same problem that me? I search the work around, I think it is a bug in form 6i.
My version is 6.0.8.10.3
Thanks.Hi Kyle:
Please find the logs attached.
Thank you,
Mim
Attachments:
drwtsn32jan14091.txt 186 KB
drwtsn32jan14092.txt 166 KB -
Having trouble with Layout Editor
Hi,
I'm using Oracle Forms Builder 6, with patch 18. Whenever I try to open the layout editor, I'm getting an error saying "Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience." and the whole program closes. This happens no matter which application I work on, even on a new form. It seems that this is a known bug and fixed in patch 12, but probably not. I have uninstalled and reinstalled the programs more than 10 times now, but still not working, and it was working good till 2 days ago.
My system is Windows XP SP2, Dual core 1.86Ghz with 2GB memory.
Any help?
Thank you in advance.> and it was working good till 2 days ago
What other software did you install 2 days ago?
Something has corrupted your system. If you have a System Restore point prior to the failure, I would try restoring to that point.
If that does not work, try to completely uninstall Forms and then re-install it. -
SAPGUI 710 Graphical Layout Editor not available in LAN
Hi,
I recently installed sneakpreview NW04s for ABAP at home and the SAPGUI 710 software. The graphical layout editor doesn't work. I have checked all requirements such as, required dll and exe files. They are all available. The problem occurs only when I try to start the graphical editor from another pc in my LAN. If I start it on the application server where I have installed NW04s and the SAPGUI, it works fine. Only when I access to the application server from other pc in my home network, it fails to start the graphical editor. I've read that there must be a problem with firewall / port somewhere. I don't know where I can check whether this is the cause. I am using D-Link wireless for my home network.
Can anybody help me with this?
Thanks in advance,
ShahramI tried SM59 and ran a connection test for EU_SCRP_WN32. It started gnetx.exe, the window appeared shortly. But, the connection failed with the following error message:
ERROR timeout during allocate
LOCATION SAP-Gateway on host OFFICE / sapgw00
DETAIL no connect of TP gnetx.exe from host %%SAPGUI%%
COMPONENT SAP-Gateway
COUNTER 5824
MODULE gwr3cpic.c ;
It seems that my laptop cannot establish an RFC connection to the application server. the service file on my laptop has the right entry for the application server.
Any ideas? -
Layout editor vs hierarchy views
I am a newbie, but I have used LiveCycle Designer 8 to create some moderately complex forms. However, I suspect I am missing some very basic understanding.
I have a several page form. For development purposes, the items on each page are enclosed in a positioned subform. There are several page-wide positioned subforms, one above the other. When I change the enclosing form to flowed, several of the subforms rearrange, so that, for example, an item at the bottom of the layout editor is shuffled to the top of the preview.
I have done various copying and pasting operations in laying out the form, and assume that is the problem. I think I can arrange things correctly by dragging them around in the hierarchy view, but I would think there would be a way to force the program to arrange the hierarchy to correspond to the layout view.
Can any of you old hands give me a pointer? Or do I just have to build the forms top-to-bottom, one element at a time, or hassle with moving things around in the hierarchy?Darrell and Chris (and everyone else)...
This posting touches on the same problem I have. I, too, am a newby. I am attempting to take a standard Boy Scout Adult Resource Survey form and set it up so the user can fill it out and elect to print it and/or email it. Ideally, I'd like to pull the emailed data into a spreadsheet.
Problem is that I have the form more-or-less functional, but I'd like to tiddy up the hierarchy view, and the order within the spreadsheet.
The hierarchy view is a mess. Is there an easy way to cull out the stuff that I don't need and reorder the stuff I have in the hierarcy view so it corresponds more to the layout view?
I've noticed that when I click on a radio button (or other object) I'm supposed to be taken to the correct place within the hierarchy view, but the "highlighing" in gray is to slight that it is very difficult to see.
The form I'm using is located at:
http://www.scouts787.org/boyscout/docs/WORKINGCOPYAdultResourceSurvey.pdf
Any assistance would be appreciated.
Rick -
Hi,
I am facing a problem with the Screen Painter Editor. When I am changing from the Module to the Layout, the editor is opening in the old fashion editor, so it is too difficult for me to design a screen, espacially when I have to design a StepLoop, etc. I am checking the settings (Utillities->Settings->ScreenPainter) and the Graphical Layout Editor is activated. I have try to deactivate and activate it again, but the result is the same - nothing.
Have anybody any idea? Thanks in advance.
GeorgeHi
THis is a BASIS Problem , the GUI is not installed Properly, Contact your BASIS Admin
While installing the GUI they need to select the GUI explicitly which they need to look into at
Hope this serve your purpose
Cheers
Ram -
How to embed placeholder from report layout editor in a link
I have created a report selecting the custom report layout option. Rather than using a link on the column, I would like to add different links in the footer section in the Report Layout Editor. My problem is trying to create a link and pass a value from the report to the next report. I have tried to use the placeholder #fieldname.field# in an attempt to pass the value in my call to the other report object but it is not working. My actual call is listed below:
Address
When I click on the link the other report returns "No row returned". If I substitue the placeholder with a value I know exists the link works correctly.
Does anyone have a suggestion as to how I can embed the placeholder in the link command. Any help would be much appreciated.Hi,
I have replied to the similar question posted by you.
Thanks,
Sharmila -
ABAP Dump - Graphical Layout Editor
Hi...I get an ABAP Dump when I try to start the Graphical Layout Editor (to modify a screen layout). Here are a few lines from the dump:
<b>&INCLUDE INCL_INSTALLATION_ERROR
What happened?
The current program had to be terminated because of an error when installing the R/3 System. The program had already requested 789763632 bytes from the operating system with 'malloc' when the operating system reported after a further memory request that there was no more memory space available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia to a maximum of 789763632. Then reduce the value by 10.000.000 to be on the safe side.
Then restart the SAP System.
</b>
<u>Here's what I know so far:</u>
<i>- I can logon to SAP but can NOT start Graphical Layout Editor from my machine using my user account.
- Other people can logon to SAP but can NOT start Graphical Layout Editor from my machine using their user accounts.
- I can logon to SAP and start Graphical Layout Editor from a DIFFERENT machine using my own user account.
- Other people can logon to SAP and start Graphical Layout Editor from a DIFFERENT machine using their own account.</i>
I have access to more than one SAP systems (different SAP instances) and I have tested the following:
<i>- I can logon to a different SAP system/server (from this same machine) and start the Graphical Layout Editor without error.
- Other people can logon to a different SAP system/server (from this same machine) and start the Graphical Layout Editor without error.</i>
The problem is not likely with low memory on my machine because I have 2 GB RAM whereas these other computers I've tested only have 512 MB or 1 GB memory. I don't see how the problem could be with the SAP server when other people are able to start the Graphical Layout Editor from their machines and even I can start it from their machines. The problem can't be with the SAPGUI files on my machine because I can start the Graphical Layout Editor using a different SAP system/server. I am completely stumped. Any ideas??I have already done the following:
- Uninstall SAP GUI using the "Add Remove Programs" & reinstall it
- Uninstall SAP GUI using the option provided by SAPGUI setup & reinstall it
- Uninstall SAP GUI using the option provided by SAPGUI setup & rename the folder "C:\Program Files\SAP" then install it again.
- Upgrade from SAPGUI v6.40 to v7.10. I'm now using v7.10
Don't forget that I <b><u>am</u></b> able to start the Graphical Layout Editor for a different SAP server using this same SAPGUI from this same computer. I don't think the problem is with SAPGUI but I appreciate your response. -
I have created a report selecting the custom report layout option. Rather than using a link on the column, I would like to add different links in the footer section in the Report Layout Editor. My problem is trying to create a link and pass a value from the report to the next report. I have tried to use the placeholder #fieldname.field# in an attempt to pass the value in my call to the other report object but it is not working. My actual call is listed below:
Address
When I click on the link the other report returns "No row returned". If I substitue the placeholder with a value I know exists the link works correctly.
Does anyone have a suggestion as to how I can embed the placeholder in the link command. Any help would be much appreciated.Sharmila-
Thanks for the reply. I am trying to reference a value from the report rather than the parameter itself. I'll try to explain. I have a report which displays information for an employee. For a custom report, in the report layout editor there are three different sections, headings, body and footer. In these sections you place the HTML to customize your layout. In the body you can reference placeholders like #EMPLOYEE_ID.LABEL# for the column heading or #EMPLOYEE_ID.FIELD# for the value retrieved from the database. In the footer section of the report layout editor I want to create a link to another report using employee_id as the parameter in the link to the next report, however, within the link I am not able to get it to recognize the value from the placeholder. When I click on the link the URL shows the placeholder #EMPLOYEE_ID.FIELD# rather than the value like 1001.
Any suggestions?
Regards
Mark -
Installetion of Grafical Layout editor
Hi All,
In my system the Graphical Layout Editer is not installed , please let me know which file is missing. How can i get that file from net and which folder i have to put that file .
whenever i am clicking layout message is displaying graphical layout editor is not installed continou which alphanumeric editor .
please help me regarding .
Thanx
Ajay pandeyI had same problem. During GUI install I didn't select "Graphical Layout editor: Screen painter" so the DLL were missing in my windows desktop system. Put the GUI CD back and run setup.exe, select option "add/remove Frontend components" from there select option "Development Tools->Graphical Screen Painter". This will install the files in the desktop. Then logon to SAP R/3 system go to user settings and turn on "graphical layout editor". Re-login to SAP R/3 and double click "call screen 100" to invoke graphical layout editor. Hope this helps.
Maybe you are looking for
-
the following sql is not working . If sum(salary) = null should be displayed 1 or 0 select empname,iif((isnull(sum(salary),0)),1,0) from salary group by empname regards Pol polachan
-
Hello I'm new to .net and I'm trying to work with bind variables I keep getting the ORA-01036: illegal variable name/number error. here's my code, can somebody help me out and show me what am I doing wrong? Protected Sub Page_Load(ByVal sender As Obj
-
Can I slipstream Acrobat Pro?
I want to slipstream Acrobat Pro 9.0 to 9.4.2? Is it possible and if so what patches do I need and what is the process? Thanks for any and all help!
-
Updated Firefox to 31.2 on RHEL6 - Red Hat Enterprise Linux Server release 6.0 (Santiago): [RHEL6-1 ~]$ rpm -qa firefox xulrunner nspr firefox-31.2.0-3.el6_6.x86_64 nspr-4.10.6-1.el6_5.x86_64 xulrunner-17.0.10-1.el6_4.x86_64 But when trying to launch
-
3rh party certificates / onfigure valid NPS servers
We have setup a working 802.1x/Radius wired environment with MS NPS/NAP. We added a third party certificate for the NPS server to get rid of certificate warnings for non-domain clients. We had a certificate for our mailserver since earlier (mailserve