EAM: EQUIPMENT DISPLAY LISTS
Dear SAP Experts,
While maintaining the equipment masters in the system.
When I maintain the entries through address: IE01 - Create (General)
The Equipment is created and saved the Number range comes: 10000006 equipment created.
But while creating through lists editing :IE10 - Create
We can create the same with names and no numbers comes.
Now When I go to IE03 - Display
The equipments created in the Lists Editing is not shown in the IE03
Please throw some light on this ?
regards,
A S
Hi AS,
When u create equipment thr IE10 u can go for either external numbering or internal numbering.
In IE10 ur inputs are mainly equipment category and plant.If u dont give reference equipment the new equipment(here its 10000006) will just have infos like planning plant,maint plant and equipment category.It doesnt have any other infos stored in it.(check the particular equip thr IE02)
So when u try to display the equipment thr address selection service, Equipment by serial number lists , equipments by functional locations,system wont display ur newly created equip since those datas are not maintained for that particular equipment.
So just search the equipment thr IE03 by giving the maint plant in Location data tab or planning plant in maintenance data tab and also maintain the period correctly in the euipment selection tab.
U will get the entire list of equipments of that plant.
Hope this will help
Regards,
Ebin
Similar Messages
-
PM Equipment Structure List Download to spreadsheet
Hi PM Experts,
Our client is asking a solution to download (spread sheet) the expanded Equipment structure list.
We can display equipment hierarcy through Tx code IH03 and IH04.We can take take hard copy print out from these reports.
Any one can suggest how to download the expanded structure list of equipment higherarchy from SAP .
Thanks and Regards
Pradeep
Edited by: Pradeep Sukumar on Oct 2, 2009 1:32 PM
Edited by: Pradeep Sukumar on Oct 2, 2009 1:33 PM
Edited by: Pradeep Sukumar on Oct 2, 2009 1:33 PMHi,
Do you have an icon 'save as local file' or a menu path 'System - List - Save - Local file' ?
Selecting this gives further options including ability to save in spreadsheet format.
If the icon or menu path is not active - see note [642753|https://service.sap.com/sap/support/notes/642753] which explains use of note [951898|https://service.sap.com/sap/support/notes/951898] to enable the icon or use of PM_TREE_INACTIVE parameter to enable the menu option.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics -
Using a devices camera and adding the image to the display list
Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/CameraUI.ht ml
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera/
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
public class Main extends MovieClip{
private var deviceCameraApp:CameraUI = new CameraUI();
private var imageLoader:Loader;
public function Main()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
private function cameraBtnClicked(event:MouseEvent):void
if( CameraUI.isSupported )
result_txt.text = "Initializing camera...";
deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
deviceCameraApp.launch( MediaType.IMAGE );
else
result_txt.text = "Camera interface is not supported.";
private function imageCaptured( event:MediaEvent ):void
result_txt.text = "Media captured...";
var imagePromise:MediaPromise = event.data;
if( imagePromise.isAsync )
result_txt.text = "Asynchronous media promise.";
imageLoader = new Loader();
imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
imageLoader.loadFilePromise( imagePromise );
else
result_txt.text = "Synchronous media promise.";
imageLoader.loadFilePromise( imagePromise );
showMedia( imageLoader );
private function captureCanceled( event:Event ):void
result_txt.text = "Media capture canceled.";
NativeApplication.nativeApplication.exit();
private function asyncImageLoaded( event:Event ):void
result_txt.text = "Media loaded in memory.";
showMedia( imageLoader );
private function showMedia( loader:Loader ):void
this.addChild( loader );
private function cameraError( error:ErrorEvent ):void
result_txt.text = "Error:" + error.text;
NativeApplication.nativeApplication.exit();Hi,
Do I have to add the picture to the cameraroll in order to add it to the AIR apps display list?
Both examples from Adobe claim that their examples work. Do they not?
In the example, the event handler asyncImageLoaded is never called. The output text field shows - result_txt.text = "Asynchronous media promise."; So the Event.COMPLETE is being added. But I don't think it's being dispatched.
Any ideas? -
Display list of sales orders for one particular customer using BAPI in WD
Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
PeterFind the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a> -
Reg: Combining two display lists into one list
Dear All,
i want to combine two display lists into one display list. Please give the idea for this one issue.
*****************dispaly list 1 starting here*********************
*& Form F_006_DISPLAY_LIST
* text
* --> p1 text
* <-- p2 text
FORM F_006_DISPLAY_LIST.
* TABLES : LFA1 .
DATA : V_DEBIT_TOTAL TYPE P DECIMALS 2 ,
V_CREDIT_TOTAL TYPE P DECIMALS 2 ,
V_CLOSE_BAL TYPE P DECIMALS 2 .
DATA : V_CNT TYPE I .
SORT ITAB_OPG BY LIFNR.
LOOP AT ITAB_OPG.
NEW-PAGE.
* Displaying Vendor Name
SELECT SINGLE NAME1 FROM LFA1 INTO LFA1-NAME1 WHERE
LIFNR EQ ITAB_OPG-LIFNR .
FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
WRITE:/2 'Vendor Code:' ,
ITAB_OPG-LIFNR ,
40 LFA1-NAME1 .
CLEAR : LFA1 .
WRITE :/(190) SY-ULINE .
* Displaying Opening Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
READ TABLE ITAB_OPG WITH KEY LIFNR = ITAB_OPG-LIFNR .
IF ITAB_OPG-BAL LE 0 .
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
171(18) ITAB_OPG-BAL .
ELSE.
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
151(18) ITAB_OPG-BAL .
ENDIF.
WRITE :/(190) SY-ULINE .
* Displaying Line Items
LOOP AT ITAB_DISPLAY WHERE LIFNR EQ ITAB_OPG-LIFNR.
V_CNT = SY-TABIX MOD 2.
IF V_CNT EQ 0.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
ENDIF.
* Selecting Bank Name and Cheque Number
SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
FROM PAYR WHERE
ZBUKR EQ P_BUKRS AND
VBLNR EQ ITAB_DISPLAY-BELNR AND
LIFNR EQ ITAB_DISPLAY-LIFNR .
SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
T012 WHERE BUKRS EQ P_BUKRS AND
HBKID EQ PAYR-HBKID.
SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
BANKS EQ T012-BANKS AND
BANKL EQ T012-BANKL .
WRITE :/2 ITAB_DISPLAY-BUDAT ,
14 ITAB_DISPLAY-BELNR ,
26 ITAB_DISPLAY-BLDAT ,
40 ITAB_DISPLAY-XBLNR ,
58(16) PAYR-CHECT ,
75 BNKA-BANKA ,
105(40) ITAB_DISPLAY-SGTXT ,
146(4) ITAB_DISPLAY-BLART .
* Determinig Debit or Credit
IF ITAB_DISPLAY-SHKZG EQ 'S'.
V_DEBIT_TOTAL = V_DEBIT_TOTAL + ITAB_DISPLAY-DMBTR.
WRITE:151(18) ITAB_DISPLAY-DMBTR ,
171(18) SPACE .
ELSEIF ITAB_DISPLAY-SHKZG EQ 'H'.
V_CREDIT_TOTAL = V_CREDIT_TOTAL + ITAB_DISPLAY-DMBTR.
WRITE:151(18) SPACE ,
171(18) ITAB_DISPLAY-DMBTR .
ENDIF.
CLEAR : T012 , BNKA , PAYR .
ENDLOOP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/(190) SY-ULINE.
* Displaying Debit and Credit Totals
WRITE:/125 TEXT-001 ,
151(18) V_DEBIT_TOTAL ,
171(18) V_CREDIT_TOTAL .
WRITE:/(190) SY-ULINE.
* Displaying the Closing Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
V_CLOSE_BAL = ITAB_OPG-BAL + V_DEBIT_TOTAL - V_CREDIT_TOTAL .
IF V_CLOSE_BAL GT 0.
WRITE:/122 TEXT-002 ,
151(18) V_CLOSE_BAL NO-SIGN. " D00K909674
ELSEIF V_CLOSE_BAL LE 0.
WRITE:/122 TEXT-002 ,
171(18) V_CLOSE_BAL NO-SIGN. " D00K909674
ENDIF.
CLEAR : V_CLOSE_BAL.
ENDLOOP.
ENDFORM. " F_006_DISPLAY_LIST
*****************dispaly list 1 ending here*********************
*****************dispaly list 2 starting here*********************
*& Form F_006_DISPLAY_LIST1
* text
* --> p1 text
* <-- p2 text
FORM F_006_DISPLAY_LIST1 .
TABLES : KNA1 .
DATA : V_DEBIT_TOTAL1 TYPE P DECIMALS 2 ,
V_CREDIT_TOTAL1 TYPE P DECIMALS 2 ,
V_CLOSE_BAL1 TYPE P DECIMALS 2 .
DATA : V_CNT1 TYPE I .
SORT ITAB_OPG1 BY KUNNR.
LOOP AT ITAB_OPG1.
NEW-PAGE.
* Displaying Vendor Name
SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1 WHERE
KUNNR EQ ITAB_OPG1-KUNNR .
FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
WRITE:/2 'Customer Code:' ,
ITAB_OPG1-KUNNR ,
40 KNA1-NAME1 .
CLEAR : KNA1 .
WRITE :/(190) SY-ULINE .
* Displaying Opening Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
READ TABLE ITAB_OPG1 WITH KEY KUNNR = ITAB_OPG1-KUNNR .
IF ITAB_OPG1-BAL1 LE 0 .
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
171(18) ITAB_OPG1-BAL1 .
ELSE.
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
151(18) ITAB_OPG1-BAL1 .
ENDIF.
WRITE :/(190) SY-ULINE .
* Displaying Line Items
LOOP AT ITAB_DISPLAY1 WHERE KUNNR EQ ITAB_OPG1-KUNNR.
V_CNT1 = SY-TABIX MOD 2.
IF V_CNT1 EQ 0.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
ENDIF.
* Selecting Bank Name and Cheque Number
SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
FROM PAYR WHERE
ZBUKR EQ P_BUKRS AND
VBLNR EQ ITAB_DISPLAY1-BELNR AND
KUNNR EQ ITAB_DISPLAY1-KUNNR .
SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
T012 WHERE BUKRS EQ P_BUKRS AND
HBKID EQ PAYR-HBKID.
SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
BANKS EQ T012-BANKS AND
BANKL EQ T012-BANKL .
WRITE :/2 ITAB_DISPLAY1-BUDAT ,
14 ITAB_DISPLAY1-BELNR ,
26 ITAB_DISPLAY1-BLDAT ,
40 ITAB_DISPLAY1-XBLNR ,
58(16) PAYR-CHECT ,
75 BNKA-BANKA ,
105(40) ITAB_DISPLAY1-SGTXT ,
146(4) ITAB_DISPLAY1-BLART .
* Determinig Debit or Credit
IF ITAB_DISPLAY1-SHKZG EQ 'S'.
V_DEBIT_TOTAL1 = V_DEBIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
WRITE:151(18) ITAB_DISPLAY1-DMBTR ,
171(18) SPACE .
ELSEIF ITAB_DISPLAY1-SHKZG EQ 'H'.
V_CREDIT_TOTAL1 = V_CREDIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
WRITE:151(18) SPACE ,
171(18) ITAB_DISPLAY1-DMBTR .
ENDIF.
CLEAR : T012 , BNKA , PAYR .
ENDLOOP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/(190) SY-ULINE.
* Displaying Debit and Credit Totals
WRITE:/125 TEXT-001 ,
151(18) V_DEBIT_TOTAL1,
171(18) V_CREDIT_TOTAL1 .
WRITE:/(190) SY-ULINE.
* Displaying the Closing Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
V_CLOSE_BAL1 = ITAB_OPG1-BAL1 + V_DEBIT_TOTAL1 - V_CREDIT_TOTAL1 .
IF V_CLOSE_BAL1 GT 0.
WRITE:/122 TEXT-002 ,
151(18) V_CLOSE_BAL1 NO-SIGN. " D00K909674
ELSEIF V_CLOSE_BAL1 LE 0.
WRITE:/122 TEXT-002 ,
171(18) V_CLOSE_BAL1 NO-SIGN. " D00K909674
ENDIF.
CLEAR : V_CLOSE_BAL1.
ENDLOOP.
ENDFORM. " F_006_DISPLAY_LIST1
*****************dispaly list 2 ending here*********************
Thanks,
Sankar MHi,
Can you post it as two halves ?
Regards,
Swarna Munukoti -
Help with taking a pic with Android camera and adding pic to display list
Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/fla sh/media/CameraUI.html
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera /
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
public class Main extends MovieClip{
private var deviceCameraApp:CameraUI = new CameraUI();
private var imageLoader:Loader;
public function Main()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
private function cameraBtnClicked(event:MouseEvent):void
if( CameraUI.isSupported )
result_txt.text = "Initializing camera...";
deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
deviceCameraApp.launch( MediaType.IMAGE );
else
result_txt.text = "Camera interface is not supported.";
private function imageCaptured( event:MediaEvent ):void
result_txt.text = "Media captured...";
var imagePromise:MediaPromise = event.data;
if( imagePromise.isAsync )
result_txt.text = "Asynchronous media promise.";
imageLoader = new Loader();
imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
imageLoader.loadFilePromise( imagePromise );
else
result_txt.text = "Synchronous media promise.";
imageLoader.loadFilePromise( imagePromise );
showMedia( imageLoader );
private function captureCanceled( event:Event ):void
result_txt.text = "Media capture canceled.";
NativeApplication.nativeApplication.exit();
private function asyncImageLoaded( event:Event ):void
result_txt.text = "Media loaded in memory.";
showMedia( imageLoader );
private function showMedia( loader:Loader ):void
this.addChild( loader );
private function cameraError( error:ErrorEvent ):void
result_txt.text = "Error:" + error.text;
NativeApplication.nativeApplication.exit();Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/fla sh/media/CameraUI.html
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera /
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
public class Main extends MovieClip{
private var deviceCameraApp:CameraUI = new CameraUI();
private var imageLoader:Loader;
public function Main()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
private function cameraBtnClicked(event:MouseEvent):void
if( CameraUI.isSupported )
result_txt.text = "Initializing camera...";
deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
deviceCameraApp.launch( MediaType.IMAGE );
else
result_txt.text = "Camera interface is not supported.";
private function imageCaptured( event:MediaEvent ):void
result_txt.text = "Media captured...";
var imagePromise:MediaPromise = event.data;
if( imagePromise.isAsync )
result_txt.text = "Asynchronous media promise.";
imageLoader = new Loader();
imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
imageLoader.loadFilePromise( imagePromise );
else
result_txt.text = "Synchronous media promise.";
imageLoader.loadFilePromise( imagePromise );
showMedia( imageLoader );
private function captureCanceled( event:Event ):void
result_txt.text = "Media capture canceled.";
NativeApplication.nativeApplication.exit();
private function asyncImageLoaded( event:Event ):void
result_txt.text = "Media loaded in memory.";
showMedia( imageLoader );
private function showMedia( loader:Loader ):void
this.addChild( loader );
private function cameraError( error:ErrorEvent ):void
result_txt.text = "Error:" + error.text;
NativeApplication.nativeApplication.exit(); -
Media browser in Premiere CS 6 doesn't display list of hard drives!
My media browser in Premiere CS 6 doesn't display list of hard drives. There is no dropdown of folders or anything to select the media from. Any suggestions as to why this is happening and how I can correct this?
If Premiere is acting weird try this:
Start Premiere with holding down shift+alt until welcome screen.
See if that will help. -
Hello,
1. What is the Tcode to see Equipment BOM list ?
2. How to see a particular ERSA material is used in how many Equipment BOM
Thanks
PrasadAs described above, there isn't a BOM list as such.
However, you could look at the Equipment BOM Logical Database (CEC) via TCode SE36
This Logical Database can also be used in TCode SQVI or SQ01
PeteA -
Noobie question: How do I add something to the display list from a non-main class?
I know how to use addChild() within the main class to add
something to the stage display list and have it appear on the
screen, but how do I add something to the stage display list from
code within another class?
So for example say I want to add some text (myTextField) to
the stage's display list from within NotTheMainClass' code, could
you give an example of the necessary code?you must pass a reference to a display list object or create
one that's available to your class.
there are so many ways to do this i'm not sure how you want
to proceed. but you can create a globally available reference to
the stage and root timeline: -
Hi experts,
i am using one standard function module in my program. i am calling this program using a submit and return statement in another program.In the standard funtion module one write statement is used. My issue is once the function module is called and the program is returning to the main program. once it is returned the main program got stopped and going to the next screen and showing the list whatever which is written by using write statement. i think this is happening because of the return statement. but i want to suppress the display list.
Thanks in advance.
ArulUse addition EXPORTING LIST TO MEMORY of the SUBMIT statement.
Like:
SUBMIT report EXPORTING LIST TO MEMORY
AND RETURN.
Regards,
Naimesh Patel -
Is the "Display list of web app items submitted by a user" feature not available in the free trial? I can see it in the tutorials but its not available when I am logged in.
Its just named a little differently now. You should be able to add the module {module_webappscustomer} through the Modules toolbox in the web page editor window, as indicated below. Please note that webapps feature is available only for webCommerce sites. Read more about the available modules and its usage in detail here - http://kb.worldsecuresystems.com/134/bc_1345.html?bc-partner#main_Web_App_Modules
Thanks,
Vinayak -
How to Check LT check box in IA02 - for Long text for Equipment Task list operations
Hi Experts,
I am trying to upload text for Equipment task list,i am able to upload texts at header,but not for operations.
At operations level - we have a check box LT which is grayed out - when am manually making an entry ( LT Check box - is getting checked when am creating entry manually ) - after manual entry - when i tried uploading text is working fine.
Can someone please tell me how to get the check box - checked - while saving text - using FM : SAVE_TEXT .
Cheers,
Rali KTry this:
function findNodes(vNode){
if (vNode.className === "field"){
if (vNode.isPropertySpecified("name")===true){
var myStateName=new RegExp(vNode.name);
var returnValue = GFL.search(myStateName);
if (returnValue!=-1){
this.ui.oneOfChild.border.fill.color.value="192,192,192";
this.access="readOnly";
else{
this.ui.oneOfChild.border.fill.color.value="255,255,255";//whatever colour is open access
this.access="open";
for (var a=0;a<vNode.nodes.length;a++){
findNodes(vNode.nodes.item(a));
findNodes(xfa.form);
Kyle -
How to display list process, when i run sql*loader in c#
Hello,
How to display list process, when i run sql*loader in c#. I mean when i run sql*loader from cmd windows, i get list process how many row has been inserted. But when i run SQL*Loader from C#, i can't get process SQL*Loader.
This is my code:
string strCmd, strSQLLoader;
string strLoaderFile = "XLLOAD.CTL";
string strLogFile = "XLLOAD_LOG.LOG";
string strCSVPath = @"E:\APT\WorkingFolder\WorkingFolder\sqlloader\sqlloader\bin\Debug\8testskrip_HTTP.csv";
string options = "OPTIONS (SKIP=1, DIRECT=TRUE, ROWS=1000000,BINDSIZE=512000)";
string append = "APPEND INTO TABLE XL_XDR FIELDS TERMINATED BY ','";
string table = "OPTIONALLY ENCLOSED BY '\"' TRAILING NULLCOLS (xdr_id,xdr_type,session_start_time,session_end_time,session_last_update_time,session_flag,version,connection_row_count,error_code,method,host_len,host,url_len,url,connection_start_time,connection_last_update_time,connection_flag,connection_id,total_event_count,tunnel_pair_id,responsiveness_type,client_port,payload_type,virtual_type,vid_client,vid_server,client_addr,server_addr,client_tunnel_addr,server_tunnel_addr,error_code_2,ipid,c2s_pkts,c2s_octets,s2c_pkts,s2c_octets,num_succ_trans,connect_time,total_resp,timeouts,retries,rai,tcp_syns,tcp_syn_acks,tcp_syn_resets,tcp_syn_fins,event_type,flags,time_stamp,event_id,event_code)";
strCmd = "sqlldr xl/secreat@o11g control=" + strLoaderFile + " LOG=" + strLogFile;
System.IO.DirectoryInfo di;
try
System.Diagnostics.ProcessStartInfo cmdProcessInfo = new System.Diagnostics.ProcessStartInfo("cmd.exe");
di = new DirectoryInfo(strCSVPath);
strSQLLoader = "";
strSQLLoader += "LOAD DATA INFILE '" + strCSVPath.ToString().Trim() + "' " + append + " " + table;
StreamWriter writer = new StreamWriter(strLoaderFile);
writer.WriteLine(strSQLLoader);
writer.Flush();
writer.Close();
// Redirect both streams so we can write/read them.
cmdProcessInfo.RedirectStandardInput = true;
cmdProcessInfo.RedirectStandardOutput = true;
cmdProcessInfo.UseShellExecute = false;
cmdProcessInfo.LoadUserProfile = true;
//System.Diagnostics.Process.Start("CMD.exe", strCmdLine);
// Start the procses.
System.Diagnostics.Process pro = System.Diagnostics.Process.Start(cmdProcessInfo);
// Issue the dir command.
pro.StandardInput.WriteLine(strCmd);
// Exit the application.
pro.StandardInput.WriteLine("exit");
//Process[] processlist = Process.GetProcesses();
//foreach(Process pro in processlist){
Console.WriteLine("Process: {0} ID: {1}", pro.ProcessName, pro.Id);
Console.WriteLine(pro.StandardOutput.ReadLine());
// Read all the output generated from it.
string strOutput;
strOutput = pro.StandardOutput.ReadToEnd();
pro.Dispose();
catch (Exception ex)
return;
finally
Thanks.friend
sqlldr is an application residing in the OS. procedure runs in the dbms engine.
you cannot run an os command directly from a procedure or a function or a package .
If you want to do so you need to use either a daemon process created by a PRO*C program
or a JAVA stored procedure to do so.
just refer to previous question forums, you can find the solution. Somebody has already given a solution using
java to run an OS command . check it out
prakash
[email protected] -
Replacing items in the display list
I have a series of objects in a display, half of which have to be updated regularly. The items are originally added to the display list in pairs and are of 2 different types. My display list look like this:
object1
object2
object1
object2
object1
object2
To update the display list, I delete half of the objects, so my list now looks like this:
object1
object1
object1
I now want to add the updated objects to the list, but doing so makes the list look like this so the objects no longer alternate:
object1
object1
object1
object2
object2
object2
Is there a better way to think about deleting and adding objects to the display list so I can maintain my alternating list?
Thank you!So, you mean to say that the objects will be displayed one after the other? just like a list? if so, go with list with itemrenderers, ArrayCollection + filters / sorting. All you do is maintain the data in a order, the list wil take care of displaying the itemrendderers .. this way it is more maintainable and scalable.
-
Simple Web Application - To display list and then details
Hello All,
I am trying to build simple classifieds web application using - JSP, MySQL.
I am little confused how to achieve following using JSP - for example -
Craigslist can display list of classifieds and when clicked on individual classified - the record is shown as Static HTML file -
http://newyork.craigslist.org/mnh/cpg/708366015.html
http://newyork.craigslist.org/mnh/cpg/708343755.html
How can i achieve the same results dynamically - i mean, how can i create a static HTML page using information in database and put that static HTML file on server so it can be picked up by search engines ...
I am new to java guys .. so please show me some light or explain me how do i code this using JSP.
Thank you,
JagdishHow can i achieve the same results dynamically - i mean, how can i create a static HTML page using information in database
and put that static HTML file on server so it can be picked up by search engines ...By definition a dynamic html page doesn't exist, so how would a search engine find something that doesn't exist?
Maybe you are looking for
-
Loop flash video in Acrobat Pro 9
Hi everyone, Is there a way to make an inserted FLV video loop in Acrobat Pro 9? Neither the import dialog nor the playback controls have this option.
-
Please reply ;3
-
Applecare - too late to buy (ordered Mac online on 20th Feb 2009?)
I didn't know where to post this question, so option for this forum!! I contacted my local Apple store today to find out if it was too late to buy and register Applecare for my Mac Pro I ordered online from Apple on 20th Feb (1 year and 1 day ago). T
-
Where used List for Packages (from Transport connection)
Hi SDN, If objects , such as queries, or webtemplates, are incorrectly allocated to a BEx package at the beginning, my question is as follows: Can we find out which objects/queries/templates have been allocated to a particular package? Via some table
-
My macpro cant find installation information on this machine. help
i am trying to reinstall the Lion but i constantly receivin this "Cant Find installation information on this machine" i need help here.