EAM OSP: How to Disable Requisition Import AutoRun on Work Order Release?

Hi,
We want to create Purchase Requisition for OSP resource Items from eAM Work Orders by manually running Requisition Import request from purchasing. But as work order is released Import Requisition is auto run and requisition created. Is there any parameter or profile option to stop this request from auto run on release? Kindly guide.
Regards,
Syed Mustafa Arshad

Hi Hrishi,
Thank your for your response.
The second option you specified Operation is used in case of Oracle Discrete Manufacturing not for EAM. It is used when you want to start requisition as Item is moved from one operation to next so it cannot be used in case of EAM.
We wanted it because our requirement was to generate requisition in incomplete status and with requisition import automatically parameter is passed as "Yes" for Workflow and requisition is generated in Approved Status. There is a patch but it was not working fine with 12.1.3 and the issue is on SR and we needed a work around urgently. But now a new patch was provided and it seems our issue is resolved now and now Workflow parameter is passed as "No".
And about requisition creation time, I came to know after raising service request that it is standard functionality and requisition import cannot be delayed to run it later manually.
Thank again for your response.
Best Regards,
Syed Mustafa Arshad

Similar Messages

How to stop PR creation from PM work order for a particular vendor?

Hello Experts,
We have following scenario for breakdown maintenance activities.
When a machine breaks down, a breakdown order is created in SAP. The external manintenance services are planned in the order. When the order is released, a single PR (with multiple item numbers corresponding to number of services) is created by SAP. The PR has a release strategy. When PR is released, PO is created followed by the SES.
The practice followed AS -IS for breakdown outside business hours:- If the breakdown happens outside business working hours, the person releasing the PRs is not available & hence PR can not be released resulting in no PO & no subsequent SES.
In this case, the maintenance is completed by the external agency & the work order is TECO. The next day, TECO is reveresed, new PR is created, released, converted into PO, & then SES.
TO-BE process:- Client expects that, for certain vendors identified, PR should not get created at all from the breakdown order. (The list of vendors will be maintained seperately). For these vendors, a framework order will be created at the start of fiscal year & SES will be created as & when required agaainst the framework order.
My concern is :- How to stop PR creation from PM work order for a particular vendor? OR delete the created PR?
Highly appreciate your quick response.
Thank you.
Amit
Note:- My ABAP consultant has checked following BADI's, but could not find it useful.
IWO1_ORDER_BADI
ORDER_COSTING_CK
DATA_EXTENSION_CK
VALUATION_CK
ME_REQ_OI_EXT
IWO1_PREQ_BADI
ME_CHECK_SOURCES
ME_REQ_POSTED
IWO1_ORDER_BADI

Dear Amit
I am giving a different dimension to your question check if it fulfills your requirement -
As we know Vendor selection comes at a later stage only after your PR creation, approval & RFQ etc. & PR generation from maintaine. order is controllled through control key PM03. While triggering PR from order you have to specify Material group, Purchase group and vendor. Try to control it through authorisation as all these are authorisation objects. The persons executing breakdown order shall no t be given this authoriations
shakti

How do I view additional records in Work orders in SSM?

How do I view additional records in work orders section? I want to view 100 records instead of the present 100 records? What would be the navigation to view more records ?

Am going to close this one and replace with simpler question

How to Attach permit automatically to an work order using abap

how to Attach permit automatically to an work order using abap
Moderator message : Not enough re-search before posting, show the work you have already done, thread locked.
Edited by: Vinod Kumar on Jan 30, 2012 2:16 PM

At least make sure that you have a default method 'browse' in your class. I mean that make a method for "displaying" or "browsing" or whatever you want to happen when you click the object, and make it default. OR actually if I remember correctly there is a default method existing already, but put your code to there.
Also try this:
-Create a container element of type 'sales order' into your task
-Bind the sales order object from workflow to the the task
Regards,
Karri

How to delete line item in a Work Order (only a line created in operation)

Hi,
I have created a refurbishment order to refurbish a mechanical seal at external parties. In the work order operation tab, I have created one line items for this purpose and a Purchase Requisition is generated. Suddenly, operation decided to cancel this request and I have problem to delete the Work Order and Purchase Requisition. I have tried to delete the operation line item but failed. This is the message when try to delete the line item " The last active operation cannot be deleted". Appreciate help on how to delete this Work Order and Purchase Requisition.
Edited by: Zahari Yusof on Apr 4, 2008 3:20 AM

hi
In Standard SAP while creating an order the short text you are specifying will automatically appear in the first operation,also in order system will ask you to enter atleast single operation ,hence it is not possible to delete the operation line ,
what you can do this either TECO the order which will clear any open PR for this
or create another operation with control key for internal activities say dummy with operation no 20 and save,then go in to order in change mode and try to delete the operation line 10 ,i think system will allow you to do that
regards
thyagarajan

How is the object link populate into work order - IW31

Hello,
I am new in PM and am in the process of trying to picking up the concept.
Question:
When I create a maintenance order (IW31), how are all the relevant data being pull out and populate into the work order?
For example,
The maintenance plan includes functional area and equipment object, material objects, and task list object.
Next, you have the equipment master, which also includes the task list, and functional location.
Finally, you have the task list which includes the Maintenance BOM component.
Hence, when I create the PM order via IW31, how are all those object information pull out and import into the order? What is the sequence? I am confused on this.
Thanks
Daniel

Daniel,
When the work order is created from the maintenance plan it copies the maintenance item data into the order e.g. Floc, Equipment, Order Type, Main Work Centre, Priority, etc.
The operations for the order are determined from the task list assigned to the maintenance item dependent upon the rule governed by the maintenance plan type (performance, strategy,etc).
PeteA

How to prevent an error of [WIP work order ... is locked-]

Hello experts
Can someone tell me how to prevent an error which [The WIP work order associated with this transaction is currently locked and being updated by another user. Please wait for a few seconds and try again.Transaction processor error].
How can you prevent that error?
P.S.
Oracle support　told me [When you make data of mtl_transaction_interface, give same transaction_header_id to all data. Then, you kick worker with appointed transaction_header_id. Or, you set up being uncompatible with workers].
I cannot allow that making with same transaction_header_id and being uncompatible with worker on my system.

Hi santosh,
You can implement badi BBP_DOC_CHECK to check vendor email and issue error message.
Kind regards,
Yann

How to disable automatic import

Each time I plug in my iPhone, iPhoto starts up and wants to import the pictures. How can I disable iPhoto from doing this?
Greg

You can change this behaviour in the Preferences to Image Capture. Set the 'When a camera is connected...' to 'No Application'.
If you're using a later version of iPhoto there is a similar preference in the iPhoto Peferences.
Regards
TD

How to disable daqmx base autorun in wince 6.0

when i am connecting mini 2440 to pc through active sync automatically daqmx base is running and arm2240 is getting hanged.

Definitely you need a USB client driver. Again what client class driver is required is depend on the USB touch screen module. Some vendors have a touch screen consist of one touch screen controller and a USB serial controller chip, the touch screen is exposed
as a USB serial client device though this you will read/configure the touch controller. In this case you need a USB serial driver to access this as a serial port and on the top you have to develop a touch driver as shown on the above link. It is all vendor
specific. Normally you need a bus to interface the touch controller. some touch screen controller are interface with I2C or SPI. Similarly here the bus is USB for your touch screen. So you need both driver, one is bus driver to access the touch controller
and another driver is to implement the touch functionality as shown in the above link.
First of all find the USB client class for your touch screen driver. you can contact the vendor or read the datasheet given by them.
Please mark as answer, if it is correct.
Please vote,if it is helpful post.
Vinoth.R
http://vinoth-vinothblog.blogspot.com
http://www.e-consystems.com/windowsce.asp

Purchase Requisition Import failing for Dropship orders

Hi,
EBS - 115.10
When dropship order is booked, data is populated into po_requisitions table...After running the import error message says 'Invalid Deliver To Location'.
Which is basically populated from LOCATION_ID of SHIP_TO Site.
DESTINATION_ORGANIATION_ID is populated as Inventory Org
DELIVER_TO_LOCATION_ID IS populated as LOCATION_ID of SHIP_TO Site.
So anything wrong in this. If yes, what needs to be changed?...Please suggest

Can you check if it is 'internal location_code' of that inventory instead of customer site location ?
Location_code is from hr_locations, location is from hz_locations.

Preferred Suppliers for OSP operation during Work order Release

Hi Gurus,
We have a requirement in one of our implementation. Client wants to provide the preferred supplier for the OSP operation, so that the requisition needs to be created with that supplier and the price should be taken from the USAGE of the OSP resources.
Anyone worked on this requirement before., please let me know the feasible options.,

Here is the code:
    REFRESH : lt_afvgd.
Getting Operation details
    CALL FUNCTION 'CO_BO_OPR_OF_ORDER_GET'
      EXPORTING
        aufnr_imp = caufvd_imp-aufnr
      TABLES
        afvgd_get = lt_afvgd.
    IF caufvd_imp-AUART = lc_auart1 or caufvd_imp-AUART = lc_auart2 .
Determination of Work Centre for Operation Relevent To PTE Eng.
      CLEAR : ls_afvgd.
      READ TABLE lt_afvgd INTO ls_afvgd WITH KEY usr00 = 'PTE'.
      IF sy-subrc eq 0.
        ls_afvgd-arbpl = caufvd_imp-VAPLZ.
        ls_afvgd-WERKS = caufvd_imp-VAWRK.
        MODIFY lt_afvgd FROM ls_afvgd TRANSPORTING arbpl WERKS WHERE usr00 = 'PTE'.
      ENDIF.
    endif.
**-- Updating operations buffer
    CALL FUNCTION 'CO_BO_UPDATE_OPR_OF_ORDER'
      TABLES
        afvgd_upd = lt_afvgd.

How is Standard Operation attachments copied to Work Order (Jobs)?

It seems the Job is linked to the Standard Op attachment, and as the Standard Op attachment is changed, it changes the attachement for previously Closed Jobs.
Is there a way to copy the attachement at the time of Work Order creation?

yes

Production order disable of document duplicate option duction order

Team
I have blocked the format setting to editing of row details. When we duplicate the document this will act as new ans allow to edit the row details.
How to disable the duplicate option in production order
Anantha Desai

Hi,
In SAPbouiCOM.BoEventTypes.et_formdata_load event write
Objform.Enable("1287",Disable)
Regards,
prasas

How to block material issue to work order

Dear Expert,
How do block material issue to work order when the item have been flag for deletion in MM module and have also been block for procurement and inventory in mm module.
Please help

Hi,
Thank you for the prompt reply, what you mean by the Standard SAP? can you provide the reference link? I am facing the problem that the item material have been flag for deletion and been block for procurement and inventory in MM module material master data however it still able to material issue to work order. Any ideal how to block the material issue to work order when the material item have been flag for deletion and block for movement in MM material.
Please help.

Automatic scheduling indicator should be disable in Work order

Hi Friends,
I want to disable Automatic scheduling indicator in work order while releasing,for this i have tried in configuration,infact its not getting disabled.
Could you please suggest me what enhancement spot i could use or any user Exit to meet the requirement.
Regards,
Srinika

Refer below document.
STEPS to use T-CODE SHD0 – TRANSACTION VARIANT
Transaction code which had been discussed is different, but that won't make any impact.
While you get Automatic Scheduling tick mark in step 3 of the document, select Invisible.

EAM OSP: How to Disable Requisition Import AutoRun on Work Order Release?

Similar Messages

Maybe you are looking for