EAN code problem

All All,
Recently I have found out strange problem on the EAN code. Some of materials have been assigned a EAN category with Internal number range, but their EAN code numbers are fall into other External number range.
Could anyone please tell me why this happen?! why system allows this happen?
Thank for your time
Alvin

Hi All,
Thanks for your response. The query is resloved.  Below is the final code that has been used.  Code set  C:     value is   '>;' and  FNC1  Value is   '>8' and code switch c to b is  '>6'.
DATA:  c_start_code_c(2)     TYPE c         VALUE '>;',
             c_fnc1(2)             TYPE c         VALUE '>8'.      
             c_ai1(5)              TYPE c         VALUE '(421)',
             c_ai2(4)              TYPE c         VALUE '(90)',
             c_ai3(4)              TYPE c         VALUE '(00)',
             c_au_code(3)          TYPE c         VALUE '036',
             C_SWITCH_C_TO_B(2)    TYPE c               VALUE '>6'.
  CONCATENATE:
              c_start_code_c
              c_fnc1
              c_ai1+1(3)
              c_au_code
              wa_adrc_to-post_code1
              c_fnc1
              c_ai2+1(2)
              wa_delivery-store_num+0(2)
              c_switch_c_to_b
              wa_delivery-store_num+2(2) INTO v_barcode1 .
  CONDENSE :v_barcode1.
Create a style with a specified barcode specifications and assign it to a text label in smartform for printing......
Hope this one useful for all....
Thx...
Srinivas

Similar Messages

  • Removal of EAN code / update problem in ECC

    Hi,
    I have a problem regarding EAN codes within MDM. If a material is created within MDM and a EAN code assigned to the material and the records is syndicated to ECC it all works fine.
    Now later we find out that the EAN code is to be removed and left blank. When syndicating this change to ECC the material is not updated.
    It works fine when changing the EAN code but not when removing the EAN code.
    If you do it manually within ECC you get a warning and then the EAN code is removed. I know you also have to mark a main EAN code within the additional data -> Additional EANs and ECC assigns this automatically if you change EAN codes and automatically removes this when removing the EAN code.
    What is needed to syndicate a removal of EAN code to ECC from MDM?
    Kind regards
    Henning

    Forget about this one.

  • Problems getting UPC/EAN codes to write in the mastering notes

    I'm pretty sure this is simple pilot error, as I don't use Waveburner on a regular basis, but...
    I was letting a friend who had to turn in some masters to a label use waveburner, as his system was temporarily down. He was given the UPC/EAN codes to enter onto each CD he had to burn (7 songs on each), and when we saved the mastering notes as a PDF file, it kept saying "none" where the UPC code was to go (on the mastering notes).
    I did get it to save and print on 2 CD's, but 5 I could not. I admittedly have no idea why it was so inconsistent, but attributed it to my missing something simple. The manual had very little to say about this.
    Has anyone else run into this? What am I doing wrong?
    Hope this isn't to vague...

    I too have complained about Datasocket error codes, messages, lack of ds browser, etc. NI said that they will hopefully have some inproved ds information in 6.1

  • Messy code problem while translating XString to String in OfficeControl

    Hi Expert,
        I have messy code problem while translating XString to String in XML-Format Word Doc in OfficeControl.
    I upload an XML-Format template Word Doc to server as a MIME Object.
    When OfficeControl is started in Web Dynpro, OfficeControl automatically open the XML-Format template.
    For the first time, I get the XString-type Context attribute bind to the content of the Word Doc,
    then translate it to string, I got the XML-format content, it's great!
    However, after the first time, when I input any new contents in MS Word in Web Dynpro,
    no matter I execute "Ctrl + S" or click the "savedocument" button,
    when I translate the XString Context attribute to String, I got messy code. (but the first time, it is good plain text)
    I use the function module: ECATT_CONV_XSTRING_TO_STRING (good for first time, dump after first time),
    SCMS_XSTRING_TO_BINARY, SCMS_BINARY_TO_STRING (good for first time, messy code after first time).
    My Demo source code is in: (system) SMV --> (local object) zhaode --> (Dynpro Component) ztest_office_control
    core source code is as:
    clear itab.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
    BUFFER = lv_datas
    IMPORTING
    OUTPUT_LENGTH = lv_length
    TABLES
    binary_tab = itab.
    CALL FUNCTION 'SCMS_BINARY_TO_STRING'
    EXPORTING
    input_length = lv_length
    mimetype = 'text/plain; charset=utf-8'
    IMPORTING
    text_buffer = lv_datas_string
    output_length = lv_data_len
    TABLES
    binary_tab = itab.
    Can you give me some advice?
    Many thanks in advance.
    Best Regards,

    You have already posted this same question several times (and some very similiar questions) within the forum.  Please do NOT multiple post your questions. This is against the forum rules of engagement. SAP employee or not, you will find yourself banned from the forums if you don't follow the rules.

  • To restrict End user to enter EAN code manually

    In Premargin check when we go for Bar code scanning, the EAN code field appears in editable mode. After scanning an article that field gets the EAN code automatically from database table for that particular article. But one can modify that ean code as it appears in editable mode. I want to make that field to appear in grey mode so that end user can not enter ean code manually and if i scan an article this field gets the ean code from master data.
    How can i restrict end user to enter the EAN code manually in the EAN code field.

    Dear Sri,
    Thanks for your reply but i have tried this option also. Let me explain you about the scenario.
    In UI screen there is a field EAN code. It can be filled either by scanner or an end user can feed the data on his own without scanning the article.
    What i want is to make this happen only by scanning not by manual entry.
    Whenever an article is scanned its EAN code automatically should come in that field.
    I have made the field in grey mode but while scanning it is not picking the EAN code of that article and throwing an error message as "EAN code field can not be left blank". When I am making that field in editable mode then it is able to pick the EAN code after scanning.

  • My iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.2

    my iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.0.4

    If itunes is comming up and saying it can't read the device because it's locked with a passcode, you may have to put your device into recovery mode first.
    To put your device in recovery mode: (Following these steps will erase your device and reset everything to factory defaults)
    1) press and hold the power button until you see the slide to power off option
    2) swipe to power off
    3) Press and hold the home button while the device is off and connect it to your computer. Continue holding the home button until you see a graphic with the iTunes logo with a picture of a USB cable below it.
    4) iTunes should give you a message that it has detected a device in recovery mode. Click ok and then select Restore iPhone. iTunes will download a fresh copy of iOS and then wipe the device and restore it. Depending on the speed of your computer's internet connection this may take a while. Just leave the iphone connected to your computer until it's finished.
    If itunes is not detecting it at all or is Not giving you the message that the phone is locked with a passcode, you may end up having to reinstall itunes. This seems to be a fairly common problem after the most recent itunes update (11.1.5)
    If this is the case and you happen to be running a windows based computer you will have to uninstall itunes in this order from your programs and features option in control panel:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Then download and reinstall itunes from itunes.com try putting your device into recovery mode again and restore.
    Hope this helps.
    Cheers.

  • Scanning an ean code

    Hello
    I am trying to make a voting application . When I scan an EAN
    code the action I want to execute is an gotoAndStop action.
    The question is how do a make a listner for the scanning job
    ?

    Remi,
    I exactly have the same issue. Can you share the user exit to be used for that issue.
    Is it only applicable for RF transaction or can you use it for e.g. a packing transaction where you attach a barcode scanner to your pc on a normal SAP GUI transaction?
    Thanks for your sharing and feedback,
    Bert

  • Visual basic code problem

    Hello!
    I want to use visual basic to build a htm which can control labview throght datasocket, i set the switch
    as " Swithc until release " in visual basic, the code is
    Private Sub CWButton1_Click()
    CWDataSocket1.Data = CWButton1.Value
    End Sub
    but the led of labview can't light on.
    is the code problem?
    thanks!

    The problem is most likely because you have the code in the Click() event handler. The click event in VB is a left mouse down AND mouse up over the controls. If you are wanting it to send out the value when you press and hold the button down, change the event handler to the ValueChanged event.
    Best Regards,
    Chris Matthews
    National Instruments

  • EAN codes to be matched automatically

    I have a scenario where I want the EAN codes 16 digit in the IDOC automatically picking up SAP code and creating the order inbound.
    Somehow its not happening. I keep getting a message description of Item is missing, I maintain the text descrption in E1EDP01 and yet cant get rid of the error.
    I am mainatining the EAN code in the material maste and expect the SAP code to automatically determined when I am creating the order.
    Unfortunately this is not working.
    Pleaase advice.

    Goto UPSPM, open the planning folder in edit mode, right click on the function button, goto function attributes, and check "Execute function when saving". Make sure that the function button is in the global planning function section of the planning folder. This setting will make the button invisible and runs as soon as the user clicks on save button.

  • Retail - EAN codes - Purchase 3 articles - sell 1 article to Stores

    Hi out there
    Could any body guide me in the right direction?
    Retail:
    A vendor delivers :
    3 articles (all fish, but in different size boxes)
    3 different EAN numbers.
    The product is sold to the Stores as one article, because the fish is sold pr. kilo
    The settings in the system does not allow the same EAN assignment to different articles.
    Can the use of additional EAN be used, and if so how???
    Hope to be able to solve this without allowing multiple EAN assignment to be able to get the Moving average correct for the product sold to the Stores
    Thanks &
    B rgds

    Hi again
    The PLU code being used in the Store for weighing the fish is in some way to be connected to the articles procured from the vendor. There are several artilces that are sold on the same PLU code in the Store.
    It's the connection to the PLU sold in the store and all the articles you buy from the vendor .
    We have tries to use additional EAN's to add these to the PLU article, but the system will not allow the PLU code (or EAN code)to be used on more than one article
    Not easy to explain, but ....
    You buy articles from the vendor:
    "Article 1" with it's own EAN code
    "Article 2" with it's own EAN code
    "Article 3" with it's own EAN code
    These articles are sold to the Store as "article 4" with a PLU code that is identified when the fish is being weigh in the store
    Is there a solution for this besides changing the message code Message no. M3348 to a warning message insted of error message?
    Anybody, pls?
    Best regards

  • BAPI_GOODSMVT_CREATE with EAN code

    hello APABERs,
    what is the best solution to read EAN code "using handheld scanner" and convert it to material number to use it in the
    Function module BAPI_GOODSMVT_CREATE.
    thanks in advance.

    Hi,
    Most of the organizations don't use EAN/UPC and material number combination.
    Though if you are using EAN/UPC then perhaps you can select material number from table MARA for EAN/UPC number (EAN11 field).
    And use it in BAPI_GOODSMVT_CREATE.
    Thanks,
    Zuber

  • KMS 9.0 trial code problem

    First of all i want so say sorry for my bad english.
    I,m from germany and i installed the file "kmsecurity9379eu2_129945.sis" from ovi store.
    My mobile phone is Nokia 5230 NAVI.
    After the trial i want to uninstall the app.
    But now i need a code to uninstall KMS 9.0.
    I've never set any code at installation and it's not my pin-code or something like 0000.
    I tried to ask the people from kaspersky to help me with that problem.
    At their forum there is an guy named Viktor "Head of Mobile Development" who want's the imei nummers from the people with that code-problem.
    But i cannot contact him, cause his inbox is always full.
    So what can i do?
    Don't want to hard reset my phone, cause there are many apps i payed for.
    And please remove the app from ovi store, cause many people have that problem.

    At first, I thought I have the same problem. I am trying to uninstall the App but it's asking for a code. But after searching for an answer online. It come to m mind that I entered an 8 digit code. I tried to enter the code. And bingo! I was able to remove it from my nokie e5-00.  Definitely, you entered a code as you cannot continue to install the trial version without creating your own code. No need to hard reset your phone.

  • EAN code  with verifier digit

    Dear friends !
    How could I configure EAN number to  propose  the EAN code as follow
    789420011111111 , in automatic way ? when material master created.
    where:
    789 = Brazil
    1200=Company code
    1111111=Material number
    1 - Verifier Digit
    thanks a lot
    Ale

    Hello,
      You can configure automatic check digit algorithm for EAN/UPC category using transaction W4ES. You have the following choices:
    1  Standard EAN check digit algorithm                         
    2  Check digit alg. for fresh produce EANs with indl art. no. 
    3  Check digit algorithm for fresh produce EANs with SAN      
    4  Ck digit alg. for fresh produce EANs w/ indl art. no. 5-fig.
    5  Ck digit algorithm for FP EANs with SAN + trading unit digit
    6  Check digit algorithm for UPC version E (UPC contraction)  
    Thanks,
    Venu

  • Ean code automatically in MM02

    Hello,
    I tried to implement the user exit EXIT_SAPLMGMU_001 to create a new ean code automatically when press the save button in material transaction MM02.
    I filled the table SMEAN_ME_TAB with new ean codes, but when the execution of save in the MM02 finalize, the new values I introduce don't appear in master material.
    I don't know if this user exit I can do it, or I need a Badi,which one?. In the case I need a badi to do it, where can call it?. in the same user exit?
    Thanks in advance,
    Jordi

    I've not used it but as per interface document and BADI document, it can be used for create as well change. I think you will have to try it out.
    When a material master record is created or extended in the standard R/3 System, default data is essentially determined from Customizing tables and from a reference material (if one has been specified).

  • EAN code with 25 characters - HIBC Supplier Labeling

    Hello,
    My client is requiring to populate the EAN code in the material master data (Basic data1 view) with 25 characters.
    But, the EAN/UPC field (MARA-EAN11) is only allowing 18 characters.
    Then, he sent me the table where the 25 char are required for the HIBC Supplier Labeling:
    +     1     F     HIBC Supplier Labeling Flag Character u201C+u201D
    I     4     F     Labeler Identification Code (LIC) an alphanumeric number
    P     1-18     V     Labelers Product or Catalog Number (PCN).
    U     1     F     Unit of Measure ID, Numeric value only, 0 through 9
    C     1     F     Check Character calculated
    I suppose that the Catalog Number (PCN) is the EAN/UPC field, but, where can be populated the rest of the fields showed above?
    Could you help me in order to understand more about EAN code in SAP?
    Thanks!
    Kind regards,
    Sandra Palomo

    Pls chk SAP note# 880520 for customer specific functions.
    Also check the doc in below link for complete EAN functionality
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d5cf7e-8890-2b10-88b6-a9b03832009a?quicklink=index&overridelayout=true
    BR,
    Krishna

Maybe you are looking for