EAN Code

Hallo, can somebody help me? I like to program a new software. This software should read EAN codes from a scanner. If somebody know, where I can find a library about this or how I program this class, please write back.
Thanks a lot
Traptor

Your scanner will either pretend to be a keyboard, or it will have a serial port interface. In either case the scanner is what understands EAN, and it will translate the barcode image into the numbers it represents. Your software just has to read from the keyboard, or the serial port, whichever it is. Look at the documentation for the scanner to find out.

Similar Messages

  • To restrict End user to enter EAN code manually

    In Premargin check when we go for Bar code scanning, the EAN code field appears in editable mode. After scanning an article that field gets the EAN code automatically from database table for that particular article. But one can modify that ean code as it appears in editable mode. I want to make that field to appear in grey mode so that end user can not enter ean code manually and if i scan an article this field gets the ean code from master data.
    How can i restrict end user to enter the EAN code manually in the EAN code field.

    Dear Sri,
    Thanks for your reply but i have tried this option also. Let me explain you about the scenario.
    In UI screen there is a field EAN code. It can be filled either by scanner or an end user can feed the data on his own without scanning the article.
    What i want is to make this happen only by scanning not by manual entry.
    Whenever an article is scanned its EAN code automatically should come in that field.
    I have made the field in grey mode but while scanning it is not picking the EAN code of that article and throwing an error message as "EAN code field can not be left blank". When I am making that field in editable mode then it is able to pick the EAN code after scanning.

  • Scanning an ean code

    Hello
    I am trying to make a voting application . When I scan an EAN
    code the action I want to execute is an gotoAndStop action.
    The question is how do a make a listner for the scanning job
    ?

    Remi,
    I exactly have the same issue. Can you share the user exit to be used for that issue.
    Is it only applicable for RF transaction or can you use it for e.g. a packing transaction where you attach a barcode scanner to your pc on a normal SAP GUI transaction?
    Thanks for your sharing and feedback,
    Bert

  • EAN codes to be matched automatically

    I have a scenario where I want the EAN codes 16 digit in the IDOC automatically picking up SAP code and creating the order inbound.
    Somehow its not happening. I keep getting a message description of Item is missing, I maintain the text descrption in E1EDP01 and yet cant get rid of the error.
    I am mainatining the EAN code in the material maste and expect the SAP code to automatically determined when I am creating the order.
    Unfortunately this is not working.
    Pleaase advice.

    Goto UPSPM, open the planning folder in edit mode, right click on the function button, goto function attributes, and check "Execute function when saving". Make sure that the function button is in the global planning function section of the planning folder. This setting will make the button invisible and runs as soon as the user clicks on save button.

  • Retail - EAN codes - Purchase 3 articles - sell 1 article to Stores

    Hi out there
    Could any body guide me in the right direction?
    Retail:
    A vendor delivers :
    3 articles (all fish, but in different size boxes)
    3 different EAN numbers.
    The product is sold to the Stores as one article, because the fish is sold pr. kilo
    The settings in the system does not allow the same EAN assignment to different articles.
    Can the use of additional EAN be used, and if so how???
    Hope to be able to solve this without allowing multiple EAN assignment to be able to get the Moving average correct for the product sold to the Stores
    Thanks &
    B rgds

    Hi again
    The PLU code being used in the Store for weighing the fish is in some way to be connected to the articles procured from the vendor. There are several artilces that are sold on the same PLU code in the Store.
    It's the connection to the PLU sold in the store and all the articles you buy from the vendor .
    We have tries to use additional EAN's to add these to the PLU article, but the system will not allow the PLU code (or EAN code)to be used on more than one article
    Not easy to explain, but ....
    You buy articles from the vendor:
    "Article 1" with it's own EAN code
    "Article 2" with it's own EAN code
    "Article 3" with it's own EAN code
    These articles are sold to the Store as "article 4" with a PLU code that is identified when the fish is being weigh in the store
    Is there a solution for this besides changing the message code Message no. M3348 to a warning message insted of error message?
    Anybody, pls?
    Best regards

  • BAPI_GOODSMVT_CREATE with EAN code

    hello APABERs,
    what is the best solution to read EAN code "using handheld scanner" and convert it to material number to use it in the
    Function module BAPI_GOODSMVT_CREATE.
    thanks in advance.

    Hi,
    Most of the organizations don't use EAN/UPC and material number combination.
    Though if you are using EAN/UPC then perhaps you can select material number from table MARA for EAN/UPC number (EAN11 field).
    And use it in BAPI_GOODSMVT_CREATE.
    Thanks,
    Zuber

  • Removal of EAN code / update problem in ECC

    Hi,
    I have a problem regarding EAN codes within MDM. If a material is created within MDM and a EAN code assigned to the material and the records is syndicated to ECC it all works fine.
    Now later we find out that the EAN code is to be removed and left blank. When syndicating this change to ECC the material is not updated.
    It works fine when changing the EAN code but not when removing the EAN code.
    If you do it manually within ECC you get a warning and then the EAN code is removed. I know you also have to mark a main EAN code within the additional data -> Additional EANs and ECC assigns this automatically if you change EAN codes and automatically removes this when removing the EAN code.
    What is needed to syndicate a removal of EAN code to ECC from MDM?
    Kind regards
    Henning

    Forget about this one.

  • EAN code  with verifier digit

    Dear friends !
    How could I configure EAN number to  propose  the EAN code as follow
    789420011111111 , in automatic way ? when material master created.
    where:
    789 = Brazil
    1200=Company code
    1111111=Material number
    1 - Verifier Digit
    thanks a lot
    Ale

    Hello,
      You can configure automatic check digit algorithm for EAN/UPC category using transaction W4ES. You have the following choices:
    1  Standard EAN check digit algorithm                         
    2  Check digit alg. for fresh produce EANs with indl art. no. 
    3  Check digit algorithm for fresh produce EANs with SAN      
    4  Ck digit alg. for fresh produce EANs w/ indl art. no. 5-fig.
    5  Ck digit algorithm for FP EANs with SAN + trading unit digit
    6  Check digit algorithm for UPC version E (UPC contraction)  
    Thanks,
    Venu

  • Problems getting UPC/EAN codes to write in the mastering notes

    I'm pretty sure this is simple pilot error, as I don't use Waveburner on a regular basis, but...
    I was letting a friend who had to turn in some masters to a label use waveburner, as his system was temporarily down. He was given the UPC/EAN codes to enter onto each CD he had to burn (7 songs on each), and when we saved the mastering notes as a PDF file, it kept saying "none" where the UPC code was to go (on the mastering notes).
    I did get it to save and print on 2 CD's, but 5 I could not. I admittedly have no idea why it was so inconsistent, but attributed it to my missing something simple. The manual had very little to say about this.
    Has anyone else run into this? What am I doing wrong?
    Hope this isn't to vague...

    I too have complained about Datasocket error codes, messages, lack of ds browser, etc. NI said that they will hopefully have some inproved ds information in 6.1

  • Ean code automatically in MM02

    Hello,
    I tried to implement the user exit EXIT_SAPLMGMU_001 to create a new ean code automatically when press the save button in material transaction MM02.
    I filled the table SMEAN_ME_TAB with new ean codes, but when the execution of save in the MM02 finalize, the new values I introduce don't appear in master material.
    I don't know if this user exit I can do it, or I need a Badi,which one?. In the case I need a badi to do it, where can call it?. in the same user exit?
    Thanks in advance,
    Jordi

    I've not used it but as per interface document and BADI document, it can be used for create as well change. I think you will have to try it out.
    When a material master record is created or extended in the standard R/3 System, default data is essentially determined from Customizing tables and from a reference material (if one has been specified).

  • EAN code with 25 characters - HIBC Supplier Labeling

    Hello,
    My client is requiring to populate the EAN code in the material master data (Basic data1 view) with 25 characters.
    But, the EAN/UPC field (MARA-EAN11) is only allowing 18 characters.
    Then, he sent me the table where the 25 char are required for the HIBC Supplier Labeling:
    +     1     F     HIBC Supplier Labeling Flag Character u201C+u201D
    I     4     F     Labeler Identification Code (LIC) an alphanumeric number
    P     1-18     V     Labelers Product or Catalog Number (PCN).
    U     1     F     Unit of Measure ID, Numeric value only, 0 through 9
    C     1     F     Check Character calculated
    I suppose that the Catalog Number (PCN) is the EAN/UPC field, but, where can be populated the rest of the fields showed above?
    Could you help me in order to understand more about EAN code in SAP?
    Thanks!
    Kind regards,
    Sandra Palomo

    Pls chk SAP note# 880520 for customer specific functions.
    Also check the doc in below link for complete EAN functionality
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d5cf7e-8890-2b10-88b6-a9b03832009a?quicklink=index&overridelayout=true
    BR,
    Krishna

  • EAN code problem

    All All,
    Recently I have found out strange problem on the EAN code. Some of materials have been assigned a EAN category with Internal number range, but their EAN code numbers are fall into other External number range.
    Could anyone please tell me why this happen?! why system allows this happen?
    Thank for your time
    Alvin

    Hi All,
    Thanks for your response. The query is resloved.  Below is the final code that has been used.  Code set  C:     value is   '>;' and  FNC1  Value is   '>8' and code switch c to b is  '>6'.
    DATA:  c_start_code_c(2)     TYPE c         VALUE '>;',
                 c_fnc1(2)             TYPE c         VALUE '>8'.      
                 c_ai1(5)              TYPE c         VALUE '(421)',
                 c_ai2(4)              TYPE c         VALUE '(90)',
                 c_ai3(4)              TYPE c         VALUE '(00)',
                 c_au_code(3)          TYPE c         VALUE '036',
                 C_SWITCH_C_TO_B(2)    TYPE c               VALUE '>6'.
      CONCATENATE:
                  c_start_code_c
                  c_fnc1
                  c_ai1+1(3)
                  c_au_code
                  wa_adrc_to-post_code1
                  c_fnc1
                  c_ai2+1(2)
                  wa_delivery-store_num+0(2)
                  c_switch_c_to_b
                  wa_delivery-store_num+2(2) INTO v_barcode1 .
      CONDENSE :v_barcode1.
    Create a style with a specified barcode specifications and assign it to a text label in smartform for printing......
    Hope this one useful for all....
    Thx...
    Srinivas

  • Externally Assigned UPC/EAN Codes

    Hi All,
           I'm having issues with assigning UPC codes for a UOM for a material. I need to have a 14 digit UPC code having 00 as a prefix. Ic reated a number range and created a EAN category.
    EAN Category Details -
    Number range object  EUROPARTNR Intl Article Numbers                    
    Int. number range                                                       
    Ext. number range    18                                                 
    Check-digit algor.   1  Standard EAN check digit algorithm              
    Fresh produce prefix 00 USA and Canada (UCC)                            
    EAN length           14                                                 
    Now whenever i try to assign an external UPC for this category, i'm getting an error -
    The EAN 8452599000046 may not be assigned externally
        Message no. WE 216                              
    Neither it is picking the prefix 00 nor it is letting me create a UPC code. When i change the number range to an INTERNAL number range, it works perfectly fine. But we need this to have external number assignment. Please help.
    Thanks,
    NK

    Can someone help me on this please.

  • How can I add a search filter by EAN (code of items) in my application?

    I have to filter my list of item (product) by their code. Someone can eplain me how can i do it? I'm new with CF. Thanks.

    I think you need to be more specific about what you are trying to do.  When you say "filter my list..." do you mean in a database query, in a full-text search, or do you mean filter a displayed list based on some user interaction?

  • LENOVO Essential B5400 80B6 i5-4200M (EAN-code:888440712857)

    Hi Can subject model or (LENOVO Essential B5400 MB82FMH i5-4200M) users tell me how it in using? whats good? whats bad? Cozi not find any normal review display - good? bad? keyboard problems ???

    a. Have you ruled out any video card/graphics card involvement in the issue....how many cards does your computer use, 1 or 2, and is the
    driver version up to date according to the manufacturer of the card? This was supposed to have been offered to a Premiere Elements user by
    Adobe Chat related to the dvamarshal.dll issue.
    I have removed the drivers tried it in VGA and still hangs, re-installed the drivers and still no joy, only one video card, its a laptop that I am using.
    b. Have you tried to create a new User Account with Administrative Privileges and install and run Premiere Elements from there?
    Not tried this, as its a work laptop and there is an admin Account on their... but I doudt it i this as the software was working for at least 2 months
    Did you install any new program that might have overwritten the Premiere Elements dvamarshal.dll file? Do you have Lightroom installed on
    the same computer with Premiere Elements?
    Some was installed but I have removed them all and still no joy
    I have seen the dvamarshal.dll issue but I fear its a very complicated fix for it hence no answers on the site... STUMPED ADOBE HELP!!

Maybe you are looking for