EAN error in material master

Hi Everyone,
We have an issue with International Article Number (EAN/UPC) being enetered in the material master.
When the user enters particular EAN he gets an error which says "The EAN # may not be assigned externally"
Message no. WE216.
I have checked the config & it is ok. The EAN Number entered is well within the number range assigned to the particular EAN category.
I also did a config check as per SAP note 879460 & corrected it in test sever, but still the error persists.
Any suggestion on what may be wrong.
Thanks.
Akshay

unfortunatly you did not post the EAN, as the number itself could explain some errors.
Read OSS Note 545520 - FAQ: International Article Number (EAN/UPC)
but the error itself explains already that you enter something manual, were SAP expects no manual entry.
is your number range an external or internal number range?
Edited by: Jürgen L. on Jan 11, 2011 11:16 PM

Similar Messages

  • UOM error in Material master.

    Hi
    When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
    Could you please suggestu2026
    regards
    Vanraj

    Hi,
    Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
    this shuld solve the issue..try and revrt back..
    Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
    Reg,
    JJ
    Edited by: Jagsap on Apr 20, 2010 4:10 PM
    Edited by: Jagsap on Apr 20, 2010 4:15 PM

  • Exchange rate error in Material Master Upload (MB1C - 561)

    Hi.
    While uploading material through MB1C with movement type 561, I am getting following error
    My company code currency, material master currency is EUR but still following error is occuring.
    "Enter rate EUR / rate type M for 01.10.2010 in the system settings
    Message no. SG105
    Diagnosis
    For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
    Procedure
    Add the missing entry in the currency conversion table.
    Execute function
    You can then continue to process the commercial transaction."
    Why system is asking to maintain exchange rate for same currency?
    What are the settings that I should maintain? Thanks in advance.
    Regards
    Anand

    Hi,
    My material master currency is EUR
    Both Stock and Upload GL accounts currency is EUR
    Co COde currency is EUR
    Where else is the revevant Settings?
    Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
    25/Oct/2010 system is giving exchage rate error
    What could be the remedy?
    Regards
    Anand

  • Dump Error In Material Master Transaction

    Dear Experts,
    When i am creating or changing any material master record, i am getting the below dump error while saving the material.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "SAPLC1AX " in include "%_CESPCL
         " in
        line 77:
        "Component called ATWRT already exists. ."
        The include has been created and last changed by:
        Created by: "SAP "
        Last changed by: "SAP "
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The following syntax error was found in the program SAPLC1AX :
        "Component called ATWRT already exists. ."
    Trigger Location of Runtime Error
        Program                                 SAPLC1F2
        Include                                 LC1F2U10
        Row                                     594
        Module type                             (FUNCTION)
        Module Name                             C1F2_SUBSTANCES_SAVE_TO_DB
    Can you please help me out with this?
    Thanks,
    Praveen

    Hi,
    I have not made any changes in the Enhancements/BADIS which are related to ATWRT, but created one ZTable for linking the
    Vendor (LIFNR), Material (MATNR) & Manufacturer (ATWRT).
    Here are the additional details of the dump which i am getting in MM01/MM02 transactions for your reference.
    Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of the dump
    Can you please help me with this?
    Thanks,
    Praveen
    Edited by: Rob Burbank on Feb 2, 2011 9:29 AM

  • Deletion of EAN number in Material Master using a BAPI BAPI_MATERIAL_SAVEDA

    Hello ,
    I am  using the BAPI_MATERIAL_SAVEDATA to update material master, I am trying to set the deletion flag to EAN code in the Basic data>>Additonal Data view.
    I am setting the deletion flag in the internal table for table bapi_mean. After running the bapi, the EAN code is not deleted.
    Any inputs how to do it.,
    Regards
    Irfan

    Hi,
    Refer the link:
    http://www.sap-img.com/abap/bapi-to-copy-materials-from-one-plant-to-another.htm

  • ERROR IN Material Master Generation (AII 4.0)

    Hi all,
    We're working with Auto ID 4.0..
    When we try to create products from R3 ECC 5.0 we find errors, the message is well sent from R3 to XI and then to AII but when the proxy is executed is thrown an ABAP exception.
    These are our errors:
    Data cannot be maintained for set type COMM_PR_UNIT
    Data cannot be maintained for set type COMM_PR_SHTEXT
    Data cannot be maintained for set type COMM_PR_GTIN
    We've done the configuration on AII about hierarchy 'AIN_BASE' and category 'AIN_MATERIAL'...
    Do we miss anything??? Please help us..
    Thanks in advance

    Hi
    we are trying to send  material master data from ERP to SAp AII system through XI. I have seen in the integration repository there are standars interface mapping and mesage mapping exists. But not clear on how to do configuration in XI nd which adapter we need to use in reciever communication channel and also the setting nede to be done in AII
    can you please help me in this? Just give me the breif description of steps that need to be followed in ERP side SAP AII side and Xi side
    thanks

  • Error in Material Master download

    Dear all,
    We are in SRM 4.0 with support pack level 11. We have revalidated our setting as per sap note 720819 as well. While downloading the material master from ECC system we are facing this error in our inbound queue.
    "Function module "CRM_DOWNLOAD_RCV_EXIT" not found"
    Kindly suggest the solution.
    Regards
    Dinesh Singh

    Hi,
    See these threads for more pointer/info:
    Re: Function module "CRM_DOWNLOAD_RCV_EXIT" not found error
    Re: ERROR MESSAGE IN SQM2
    Also see whether all the steps have been performed as mentioned in this weblog:
    How to replicate material master from R/3 to SRM
    BR,
    Disha.

  • Error in Material Master

    I am getting an error while viewing in mm03 <i><b>Sales:Sales Organixation Data</b></i>  The error is <b>"No plant-specific data exists"</b>
    Please suggest what could be possible error in maintaining the material master and necessary corrective steps.
    Thanks
    Praveen

    The error is self explainatory "No plant-specific data exists"
    Go to mm01 & maintain the date for the organizational levels you are tyying to view:
    Plant      
    Sales Org. 
    Distr. Chann

  • WF - Error in Material Master extension

    Hello friends
    I have some changes to the coding(in ABAP not BOR) related to a workflow of Material Master creation and extension, there is a Z table from where it picks the profit centre to create and extend materials.
    When Profit centre is there for a plant, the workflow executes without error but when profit centre is not there then workflow is not executed, it gives the following error.
    ROLLBACK WORK executed (SWP_CALLBACK_WI_DONE item 8)
    ROLLBACK WORK executed (SWP_CONTINUE_WITH_NEXT_NODES item 1)
    stating that it could not find agents.
    I have checked in MM01 Profit centre is not a obligatory field and neither is there any check in coding for the same.
    I have no idea what to do, please guide.
    Thanks
    Bhavna

    Dear Bhavna,
    Please check if you are validating Profit Center before calling agent determination. It appears that Agent Determination is linked with Profit Center.
    Hope this is helpful.
    Regards,
    Naveen.

  • Error Loading Material Master Data

    Hi All, When I try to load ZMATERIAL in BW development. I am getting the below error. I am on BI 7.0. seems like bad data, but how to fix it?? any thoughts??
    in the details TAB of the monitor, I  get a red error message under
    'Transfer (IDocs and TRFC): Errors occurred '
    >>Processing (data packet): Errors occurred
    >>>Data Package 5 ( 10417 Records ) : Errors occurred
    >>>>Update ( 0 new / 0 changed ) : Errors occurred
    >>>>>Data records for package 5 selected in PSA - 1 error(s)
    >>>>>>ZMATERIAL : Data record 10416 ('000001 '): Version '000001 ' is not valid
    >>>Processing end : Errors occurred
    >>>>>Error 4 in the update

    Hi PK,
    i can give you some indications:
    This message indicate that in R/3 you have an incorrect  value and the data record indicate the key with The important information.
    When controlling the InfoObject and the transfer rule you can extract the info that you need to correct the data i think in your case you have to check the length and the character type between your infoobject in BW and the field table in R/3.
    transaction RSA1==> Infosource==> find your Infosource==> double click on your Infosource that take you to transfer rules==> and here you can check the mapping between your infoobject (ZMATERIAL) and the original field in R/3 that you have to correct.
    in the same screen under Transfer_structure/transfer_rules you can find the name of the datasource and in R/3 transaction RSO2 you can find the original table that contain the field to correct.
    when you  individualize the table and the field communicate this Info to the persons who works on R/3 and after they correct the data reload again in BW.
    i hope that this Info help you
    Bilal

  • LSMW error in material master classification uploading

    Hi,
    I'm uploading classification for materials by LSMW with a direct input
    but at the end of the uploading process I can read the following:
    Error Changing Classification Data
    Other
    ( CLAP_DDB_UPDATE_CLASSIFICATION: exception     3  )
    The Following File Was Created with the Error Records:
    RCCLBI03.ERROR
    How Can I find a list of all the exceptions ?
    Thanks!
    Best Regards

    CLAP_DDB_UPDATE_CLASSIFICATION is a function module. which is called from the batch input program RCCLBI03 that you have in your LSMW step1.
    so you can go to SE37, enter CLAP_DDB_UPDATE_CLASSIFICATION and either read the docu or directly display the FM, therein is a tab for exceptions, just count starting from top
    the third is classtype not defined

  • How to maintain material master data in plant....

    Hi all,
    while creating BOM I am getting an error "no material master data in plant'  can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Hi,
    Please check the below link for MMR creaion .
    http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
    Regards,

  • How to maintain the material master data in plant

    Hi all,
    while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

  • Material master-additonal unit of measurement

    HI, I have three questions
    a) we have the follwoing data defined in material master (additonal data)
    X UOM Y UOM EAN
    1 LITRES 1 LITRES NIL
    1 IGB (inner packg) 20 LITRES 345922222222
    1 GBE (packg) 20 LITRES 345922222222
    I need to know what is EAN no and in our case the EAN no is same for both inner packg and pack. . what does this mean. Sometimes we also see the EAN no is different. why... what it signifies ?
    2) We have outbound idoc trigerred from delivery. message type is WHSOD. in one of the segments (E1EDL24), the system shows the delivery qty and material no. This segment also shows the EAN NO AS 345922222222. In segment E1EDL26, the filed UMVKZ shows as 1 which is ok (numerator as shown above) but the numerator field shows 1 only (it does not show 20 litres,, i think the field name is UB something ).
    I need to know why the system is not showing 20 litres in numerator in the filed for segment E1EDL26.
    3) Had we have two different EAN in material master as above, did our standard message type would have shown the conversion factors (numerator and denomi ) as per the EAN nos.....If yes, then in which segments ,the WHSORD shows the Conversion factors based on different EAN nos in material master-UOM tab (for instance if 1 GBE (packg) = 30 LITRES and EAN IS 345911111111.... I think there will be as many segments in idoc as there are entries in Additonal data-UOM tab )
    rgds
    pamela

    Hi Jurgen,
    I think you did not understand. My questions is as follows.
    a) why we maintain alternative UOM in material  mastr (additional data) ? an example ould be good.
    b) We have in our system base unit of masuement as  litres and sales unit as blank. that means system will take sales unit of measurementt as litres only.
    now we make sales order and make delivery and a outbound whsord idoc is sent to third party warehouse. the third party warehouse undertsands only IGB(pack ) unit of measure wherase our idoc i think will carry LT (litres ) as UOM...
    we do maintain the conversion factor between litres and IGB in our material master (additional data tab).That is our idoc shud carry conevrsion factor as maintained in ur material maste ( 20litres =1 igb ). so our idoc shud carry .05 as conversion factor
    so that our third party warehouse understands that and dispatch 1 IGB of qty (2 litres as per our delivery )
    rgds
    Pamela
    Edited by: Pamela79 on Aug 11, 2011 4:49 AM

  • Idoc segments for additional UOM in material master

    HI, I have three questions
    a) we have the follwoing data defined in material master (additonal data)
    X UOM Y UOM EAN
    1 LITRES 1 LITRES NIL
    1 IGB (inner packg) 20 LITRES 345922222222
    1 GBE (packg) 20 LITRES 345922222222
    I need to know what is EAN no and in our case the EAN no is same for both inner packg and pack. . what does this mean. Sometimes we also see the EAN no is different. why... what it signifies ?
    2) We have outbound idoc trigerred from delivery. message type is WHSOD. in one of the segments (E1EDL24), the system shows the delivery qty and material no. This segment also shows the EAN NO AS 345922222222. In segment E1EDL26, the filed UMVKZ shows as 1 which is ok (numerator as shown above) but the numerator field shows 1 only (it does not show 20 litres,, i think the field name is UB something ).
    I need to know why the system is not showing 20 litres in numerator in the filed for segment E1EDL26.
    3) Had we have two different EAN in material master as above, did our standard message type would have shown the conversion factors (numerator and denomi ) as per the EAN nos.....If yes, then in which segments ,the WHSORD shows the Conversion factors based on different EAN nos in material master-UOM tab (for instance if 1 GBE (packg) = 30 LITRES and EAN IS 345911111111.... I think there will be as many segments in idoc as there are entries in Additonal data-UOM tab )
    rgds
    pamela

    Hi,
    As for as i know EANs  are not relevant to unit conversion. This is a number which uniquely identifies a material for a particular UoM.
    And regarding the numerator and denominator, check whether any logic is added in the corresponding segment which overwrites the value

Maybe you are looking for

  • "Reconnect All" actually only reconnects ONE file at a time?

    Hi, I recently moved all my referenced masters from a USB drive which was rapidly filling up, onto a NAS (Netgear ReadyNAS Duo 2TB). The Masters are all in exactly the same file structure (...Aperture --> Aperture Photos --> year --> month) as they w

  • All of the free music that comes with iMovie is suddenly missing. How do I get it back?

    I wanted to start a new project in iMovie, and I realized all of the iLife music is gone. I'm not talking about my iTunes songs, which are all there. I'm talking about the free music that comes with iMovie/iLife. I used some of the music in a previou

  • Switch CSS while editing page to print media

    My site uses media:print CSS which gives a totally different layout to a page (including revealing some hidden DIVS). My users are editing with Macromedia Contribute 3. Is it possible to switch the view to show the print css (media:print) while editi

  • 802.1x access points using ISE for trigger

                       We are deploying AP's with 802.1x ports. We do not want ot have static AP ports. When plugged into a switch port with 802.1x configured the AP does not kick up the smart port trigger. How do I link the trigger from ISE to send the

  • HOW TO SEND XML BACK TO PRINT? (See Inside thread for more info)

    Hello Everybody, Because there is not a lot of documentation on  if_fp and if_fp_pdf_object I found out that i can retrive my PDF from the ADS with the following code:     data:     lo_fp                 TYPE REF TO if_fp ,     lo_pdfobj