EAN/UPC code.... CARTON-ID (13 digit) as HU ID in EWM
Hi All,
My client currently uses EAN/UPC code.... CARTON-ID (13 digit) as an which vendor will print on CARTON and send it.
Its sap IS-Retails system . No HU-managed and No Sap WM managed.
Now client is going for EWM impl, where it requires HU ID Number to automate follow-on process. Client is asking US to use the same CARTON-ID as HU ID in EWM process. ( we suggested to assign Number range to Vendors or Stick HU labels Manually at warehouse to automate the process)
It is possible to use CARTON-ID as HU ID number in EWM? kindly suggest very urgent.
Thanks in Advance
Hi Rahman,
Lets assume you are dealing with outbound deliveries and you have raised an outbound delivery in ERP and this gets replicated to EWM.
When you do the picking and packing for this delivery, it would look for packing profile behind the Warehouse order and when it creates an HU, it asks for HU or takes it from preceding document.
This again depends on the Number range you defined.
There is a BADI /SCWM/EX_WHO_DSTGRP, which you could control to pass your own HU id here(Could be for example your carton ID).
You could use similar concept with slight modifications during your goods receipt also.
Regards,
Kishore
Similar Messages
-
Warehouse receiving using vendor EAN/UPC code
Is it possible to capture the vendor EAN/UPC code and use this information to receive the goods in the warehouse/plant?
First issue would be how to deal with duplicate vendor EAN/UPC.
I have seen many posts where it is possible in IS-AFS but has anyone done this in standard R/3?
ThanksYou can certainly search by EAN/UPC when performing GR with MIGO. Click on the binoculars and it's the fifth field available to search via.
So as long as you have the code set against the material master . . .
Regards,
Nick -
EAN/UPC CODE and PURCHASING GRID
Hi Experts,
In material master can you please let me know how to configure,
1) EAN/UPC Code configuration in Material Master
2) Purchasing grid
I need the info urgently.
Regards,
SubhaHi Subha,
1)The EAN/UPC's configuration is done in the path
SPRO>Logistics general>Material Master>Settings for key fields>Internal article numbers:
Here we can define external or internal number ranges for the EAN's.We can also define the prefix for EAN/UPCs and define the attributes of the EAN/UPCs.
2) Grids are used in AFS(Appearl and Footware system).There are material grid,purchase grid and sales grids in Appearl and footware industry.
We have to define Charecterstics and using them we have to define a grid(matrix type).While creating a material master this purchase grid has to be assigned in the AFSpurchasing view of the AFS material.
For example--Shirt(material)- Silk cloth white colour 40 size,Silk cloth golden colour 42 size,cotton cloth blue colour 40 size.Here cloth,colour,size are the 3 charecters.Using these 3 charecters a grid is created.This grid is assigned to the material.With this we can have n number of combinations for a single material.
Regards,
Rambhupal -
EAN/UPC code in the material master
Hi all,
Does anybody have the scenario where the UPC number of a product is the same as the SCC number displayed on the container that holds this product with the difference being the EAN category and the leading zeroes? For example: UPC of a bottle is 080686001409 with EAN category = UC (length = 12 digits) and SCC of the case is 00080686001409 with EAN category = SC (length = 14 digits). The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00080686001409 and ctg SC for example, SAP automatically changes it back to the first code 080686001409 and maintains ctg SC. So now I have the same code with 2 different categories (and one of them u2013 SC u2013 has an incorrect length).
Please let me know if you have this scenario and what you have done to solve it.
Thanks in advance!Hi ,
I am also facing the same problem. The system not allowed saving the same EAN/UPC number for multiple SKUu2019s with varying number of leading zeros.
For example: UPC length 12 digits value like 085267207850 with EAN category Z3 and SCS length 14 digits value like 00085267207850 with EAN category Z5. The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00085267207850 and category Z5, SAP automatically changes it back to the first code 085267207850 and maintains category Z5. So now I have the same code with 2 different categories (and one of them u2013 Z5 u2013 has an incorrect length).
Could you please let me know what you have done to solve it.
Regards,
Ismail -
Extra numbers are added to EAN/UPC code
When UPC code is scanned extra number "2" is added to the UPC number. Please contribute if anyone knows the reason
Hi Sudip,
Barcode scanners have internal programming logic and they need some settings as well before using them.
Please refer to the below link of Fujitsu
http://www.fel.fujitsu.com/support/scanner/manuals/6x40/User/contents/EN/03/c03_17_01.htm
If you are using a different scanner,refer to the scanner operator's guide before using them.
http://www.vendapin.com/Adobe%20files/Fametech_barcodescanner_programming_manual.pdf
Hope it helps
Best Regards,
Aram K. -
EAN/UPC Table for materials
Hi,
Please help me to find the materials without the UPC/EAN code maintained in the Additional data of material master.I even tried with the table "MEAN",but this table only contains the data having maintained for the grid values of the materials.
Please help me finding the materials where the EAN/UPC code is not maintained per grid value .
Please help..Hi,
Through the table "MARM",i can only see the UPC/EAN codes equivalent to the data present in the basic data of the material master.
But i am not able to get the grid values for which the EAN/UPC is not maintained in the additional data of material master.
MEAN table only takes of the data if maintained in the additional data of material master for the grid values of the material
Please help... -
EAN/UPC check digit creation with Direct Input
Hi Experts,
I am working on Material data transfer using Direct Input. Requirement is to update the EAN/UPC for each Alt. UOM in Additional data view of Material master.
Further we need to set Indicator for automatic Determining the check digit for EAN .
I got Direct IP structure BMMH8 and BMMH6 for transfeering this data but didnt got Indicator field which I can set to automatic determining the check digit for EAN
Please let me know how to pass indicator for finding the check digit automatically while creating materials using Direct Input method.
Thanks in Advance...
<i>-Harkamal</i>Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV -
EAN/UPC# in Basic Data1
Hello,
Some basic information needed to understand the process better.
Can you tell me in MM01 - material master if it is a requirement to use the UC# in the EAN/UPC field in Basic Data 1?
Should the EAN/UPC field reflect what the customer is sending in on their orders?
Thanks,
VictorHi,
If you sell products to a distributor or a retailer, those products may need a UPC bar code that represents a "Global Trade Item Number (GTIN)
In SAP, you have to define attributes for EAN Category say "UC" through SPRO
Logistics General-Material Master-Setting for Key fields-International Article NumbersDefine attributes for EAN
The following field has to be entered as per your requirement.
EAN category
Number range object
Int. number range
Ext. number range
Check-digit algor.
Fresh produce prefix
EAN length
W4EN is the tcode for creating number range for EAN codes.
Please let me know if you have any questions.
Thanks,
Vasanthan -
I have a requirement to scan the UPC code on a product (with a handheld laser scanner) and have that UPC print on a Pages document.
So far I've installed a UPC font, but the code that is generated from the scan is not scannable when the document is printed out.
Question: How do I get what I'm scanning to be represented properly by the UPC font? Or is this not doable?
Any helpful suggestions would be greatly appreciated.
-GMOAn AppleScript could perform the "ton of gyrations" for you.
If the scan produces a twelve digit number, with no hyphen in the middle, and you copy it to the clipboard, then running this script:
--Have the twelve digits from the scan on the clipboard
set raw_list to characters of (the clipboard as text)
set code_list to item 1 of raw_list as list
set blue_code to characters of "qwertyuiop"
set red_code to characters of "asdfghjkl;"
set Green_code to characters of "zxcvbnm,./"
repeat with i from 2 to 6
my mydecode(blue_code, (item i of raw_list))
set end of code_list to result
end repeat
set end of code_list to "-"
repeat with i from 7 to 11
my mydecode(red_code, (item i of raw_list))
set end of code_list to result
end repeat
my mydecode(Green_code, (item 12 of raw_list))
set end of code_list to result
set the clipboard to code_list as text
on mydecode(alist, anum)
if (anum as number) = 0 then
return item 10 of alist
else
return item (anum as number) of alist
end if
end mydecode
--end of script
will place a string of characters on the clipboard that will display as the barcode in the CarolinaBarUPC font. (In Pages '09, on Snow Leopard, at any rate.) -
Report with EAN/UPC by article/vendor
We are looking for a report of EAN/UPC numbers by article. We would like to be able to select by Article, Vendor and/or Merchandise Category. If there are multiple EAN/UPCs by vendor, each should be listed with it's category.
Although I could write such a report in ABAP, it seems that this should be a standard report. Does any one know a t-code for such a report?
Thanks in advance,
DebI donot think there is a standard report to List the materials (Or Articles in IS - Retail) by EAN numbers.
I do not know the Business requirement, but I can tell you that when you go to MM03 and ask for the list of matrials, you can select the materials based on the selection Criteria (List materials by EAN), which will give you all the matrials for which EAN has been maintained.
Unlucky. MM60 does not have the option you are looking
Hope this helps.
Regards
SS
Edited by: Shankar Shivappa on Mar 27, 2009 1:28 AM -
Can I print EAN-13 code with report (6.0)?
Thanks!
Milan
P.S. OTN had an article about, but I can't
find it.Hi ,
I am also facing the same problem. The system not allowed saving the same EAN/UPC number for multiple SKUu2019s with varying number of leading zeros.
For example: UPC length 12 digits value like 085267207850 with EAN category Z3 and SCS length 14 digits value like 00085267207850 with EAN category Z5. The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00085267207850 and category Z5, SAP automatically changes it back to the first code 085267207850 and maintains category Z5. So now I have the same code with 2 different categories (and one of them u2013 Z5 u2013 has an incorrect length).
Could you please let me know what you have done to solve it.
Regards,
Ismail -
Hi All,
We have a requirement in our Production system related to UPC code.
Whe the material X was created it was assigned an EAN Categroy UC it generated a UPC code.
After this happened they deleted the UPC code in material master.
UPC code number 885909177950 for EAN caegory UC.
User now wants to re-assing the same UPC code.
Is this possible. Please guide me if this is possible.
Thansk in Advance,
MJok i got the workaround
-
Where can I find the batch no (or UPC code or Lot no) in the Delivery doc?
Hi all,
I am using 4.6c . I send the IDoc DESADV to my customer and they get the EDI document which their translator converts back to IDoc. I need to find this information in the delivery document (vl03n):
lot no., batch no. UPC code. so that I can populate them in the outbound IDoc.
I could find the batch no in the table LIPS in the field CHARG. and I know in the EDI, the segment is SLN where this information is stored, but where is this in the actual delivery document (and the outbound IDoc)?
Please ask me if my question should be elaborated.. Hope you can tell me the tab and the field in the Delivery document (it could be at header or item level.)
Thanks,
Charles.Hi there Charles,
Batch number is in DESADV IDOC in field E1EDP09 CHARG. In VL03N, you can drill down into a line item, and go the the Batch Split tab to see this number.
I don't believe UPC number is a standard SAP field. There is a EAN (European Article Number) field which can be used like the UPC field if needed.
I have a case where a customer sends a UPC and lot number on their order, and needs to see it back on the EDI shipping notice. I store these values in custom text fields, which pass from the order, back to the DESADV IDOC after delivery. From there, I can include them in the EDI back to the customer.
Regards,
Aaron
*Helpful? Poins are appreciated -
AFS Material Master - UPC code at SKU (Grid) Level
Hello experts,
I understand that on the AFS Material Master there is a field for UPC code on the Basic Data tab. If you wanted to store the UPC at the SKU level (Grid level) based on Grid Values, where would you enter that data? Is it stored on the Material Master?
Thanks for all the help!We will have to enter the SKU level data in the Material Master
MM02 -> Additional Data -> Additional EANs
Regards
Sudha -
Issue with UPC codes in Inbound sales orders via EDI.
Hi All
We are on ECC 6.0. We have incoming sales orders through EDI IDOCS. In the incoming IDCO the customer can provide either of the following information in that sequence.
1. GTIN number
2. Customer material number
3. UPC code
4. Old Product code.
We need to derive the correct material number for each customer. Now I can achieve this through standard material determination using material determination type access sequences in the order specified above. However I cannot do the same, as we need to use material determination for genuine promotions. For example I can maintain a material determination record to map UPC 123456789 to Material number ABC in SAP R/3. However we do have situation where in for a particular season or depending upon the ATP situation we may have to derive Material XYZ (SAP material number) in case customer orders material ABC. So in other words if I use material determination to derive my SAP material number for in-coming IDOCS based on UPC codes then I would need to have multi level material determination. I.e. From an IDOC for UPC code 1234566789 I derive material ABC and then for material ABC derive material XYZ.
I tried setting up these two layers of material determination in the standard system. It is possible only if I use a substitution reason which copies the material entered as a sub-item. We do not want to maintain the sub-item in sales order and relevant documents for a lot of other reasons. Is there a way I can use standard Material determination/substitution to derive this multi level search without haveing to copy the sub-item in sales order? Am I missing some settings here? If not is it possiblt to suppress the sub item from being derived in SAP using some user exit in sales order processing?
For an IDOC I could have used standard SAP tables to identify SAP material number based on UPC code. However the problem is we have multiple SAP material numbers assigned to one UPC code. So it is not possible to identify a unique material number just based on the UPC code.
I would like to know if any of you experts have encountered a similar situation and if so what is the ideal way to resolve this issue. Any comments/suggestions/guidance is welcome. You can also reply at my e-mail id [email protected].
ThanksHi Daniel,
Can you please which IDoc message type you are using to create sales order using IDoc?
Also check in IDoc, what is the value of ACTION & EINKZ fields in segment E1EDP01?
Regards,
Amit
Maybe you are looking for
-
JBO-26061: Error while opening JDBC connection
Hi, I have pasted this thread in Jdev forum for several days. But I still cannot solve this problem. The ADF application works fine in Jdev 11g's default server. After the login page, it can go to the correct jspx page. I create a new weblogic domain
-
FI validation on IDoc sent by XI is failing
Hi All, We have requirment that when IDoc is posted sent by Xi, a certain validation is run on the SAP end which checks that if PRPS-SCOPE = 'INVST' and COBK-USNAM != 'POWERPLANT', then only the IDoc should not get posted. and we are sending
-
Help - Fatal Error When Loading New Updates of System Software
Help please!! I have a 8120 and just logged in to sync ( as I do weekly) and was alerted to a Latest Update of Software, so I clicked yes etc. and it all started well, then when the software was part way through the install - suddenly it issued me wi
-
When I go into About this Mac and I look at my storage and the movie section is taking up the most space. Does anybody know where I can find those movies so I can deal with these movies taking up so much space. I would love how to know where to find
-
Place spry navigation on top of an image?
I have an image on the side of my web page that I am building. I want to place a spry navigation bar on top of this image but I can't figure out how to position it correctly. Can anyone give me a hint? I'm using CS3 on a Mac. Thanks, Lou