EAN/UPC# in Basic Data1

Hello,
Some basic information needed to understand the process better.
Can you tell me in MM01 - material master if it is a requirement to use the UC# in the EAN/UPC field in Basic Data 1?
Should the EAN/UPC field reflect what the customer is sending in on their orders?
Thanks,
Victor

Hi,
If you sell products to a distributor or a retailer, those products may need a UPC bar code that represents a "Global Trade Item Number (GTIN)
In SAP, you have to define attributes for EAN Category say "UC" through SPRO
Logistics General-Material Master-Setting for Key fields-International Article NumbersDefine attributes for EAN
The following field has to be entered as per your requirement.
EAN category
Number range object
Int. number range
Ext. number range
Check-digit algor.
Fresh produce prefix
EAN length
W4EN is the tcode for creating number range for EAN codes.
Please let me know if you have any questions.
Thanks,
Vasanthan

Similar Messages

Issue with EAN/UPC field in "BAPI_MATERIAL_SAVEDATA"

Hello guys,
I have a requirement where I am using the BAPI_MATERIAL_SAVEDATA to create a new material by using a reference material. The question is how can i pass EAN/UPC field into it?
This field exists in Basic Data1 tab in MM01 screens. I am not getting how to pass values into the INTERNATIONALARTNOS type BAPI_MEAN ?? This is there as table parameters in the BAPI?
Please advice

Hi
Issue with BAPI_MATERIAL_SAVEDATA
Bapi_material_savedata help with parameters
Regards
Pavan

EAN/UPC NO. issue...

Hi SAP Gurus,
my client is using the interface to upload master data.
In basic data 1 the EAN/UPC field contains UPCu2019s without the leading zero. Example upc= 058912365 shows as 58912365 in basic data 1.
I want to know why it is missing leading zero im mat. master.
My EAN No. range defined in sap system is 00001 To zzzzzzzzz.
Is it possible to have leading zero in mat. master?
Does i need to change the ean no. range?
Plz. help
Rgds,
Navin

hi
Standard SAP does not support this.

EAN/UPC Table for materials

Hi,
Please help me to find the materials without the UPC/EAN code maintained in the Additional data of material master.I even tried with the table "MEAN",but this table only contains the data having maintained for the grid values of the materials.
Please help me finding the materials where the EAN/UPC code is not maintained per grid value .
Please help..

Hi,
Through the table "MARM",i can only see the UPC/EAN codes equivalent to the data present in the basic data of the material master.
But i am not able to get the grid values for which the EAN/UPC is not maintained in the additional data of material master.
MEAN table only takes of the data if maintained in the additional data of material master for the grid values of the material
Please help...

EAN/UPC field in sales order is grey field

Dear all,
when i am creating Sales Order, EAN/UPC field is grey field i cannot enter any value in that.
I want to used these field, then how i can use these field.
Also is there any specific purpose for the EAN/UPC field,where it is used.
Regards,
PM

PM,
What our Friend said is correct it comes from Material master- Basic data 1 view. But for this you will have to do proceed with configuration settings in
IMG --> Logistics General --> Settings for Key Fields --> International Article numbers (EAN)
a. You will have to define number of ranges for EANs/UPCs
b. Define Prefixes
c. Define Attributes - (Define number or EAN CAtegories) its here you need to maintain internal or external
d. Define no ranges for perishables
you can maintain data internally or externally based on your config settings. I have tried it in my material master maintained EA - perishable EA Category in MM automatically an internal no got assigned in EAN field after saving i raise a sales order the no. is reflecting in my sales order item details under sales tab - field.
try it..
Regards
Sathya

Ean/UPC no is sales order

Hi Gurus,
I have one isse in which for every material UPC number has been attached but for one material EAN number has been attahced.
Can you please explain me regardingthe concept from where this field get populate

PM,
What our Friend said is correct it comes from Material master- Basic data 1 view. But for this you will have to do proceed with configuration settings in
IMG --> Logistics General --> Settings for Key Fields --> International Article numbers (EAN)
a. You will have to define number of ranges for EANs/UPCs
b. Define Prefixes
c. Define Attributes - (Define number or EAN CAtegories) its here you need to maintain internal or external
d. Define no ranges for perishables
you can maintain data internally or externally based on your config settings. I have tried it in my material master maintained EA - perishable EA Category in MM automatically an internal no got assigned in EAN field after saving i raise a sales order the no. is reflecting in my sales order item details under sales tab - field.
try it..
Regards
Sathya

EAN + UPC on same material

Is is possible to get a UPC and EAN assigned to one material? Can the both be added to the BOM and/or how can correct one be chosen during production?
Any advise?
G

Hello
Assuming you have defined an EAN (EAN Category = 'HE' = Manufacturer EAN) for the material in the "Basic Data 1" view then you can assign the UPC within the "Additional Data -> Units of Measure".
Assumption: Base UoM is CS (= Case).
Then you define a ratio of 1CS : 1CS an assign the UPC (NUMTYP = 'UC').
However, I cannot tell you if and how the UPC can be dragged into the BOM.
Regards
Uwe
PS: Obviously it is possible, too, to use the UPC in "Basic Data 1" and assign the EAN within "Units of Measure".

EAN/UPC No

Dear all,
As per the client requirement The EAN No. in Material/ Article master should get Automatically assignet to material/article during the creation of material/article Master
E.g My Article No is ABCDEF10032146 , The EAN.UPC No 10032146 should get automatically assigned to this article/material
I dont was EAN should get derived internally.
can anyone tell me how to achieve this
Thanks and Regards
Tara

Hi ,
Check
IMg>Logistics - General>Basic Settings>Settings for Key Fields>International Article Numbers (EANs)-->Define Number Ranges for EANs/UPCs
and make it external.
and also check
IMg>Logistics - General>Basic Settings>Settings for Key Fields>International Article Numbers (EANs)-->Define Attributes of EANs/UPCs. Here autually you assign No. range interval to EAN category.
Regards,
Anupam

Report with EAN/UPC by article/vendor

We are looking for a report of EAN/UPC numbers by article. We would like to be able to select by Article, Vendor and/or Merchandise Category. If there are multiple EAN/UPCs by vendor, each should be listed with it's category.
Although I could write such a report in ABAP, it seems that this should be a standard report. Does any one know a t-code for such a report?
Thanks in advance,
Deb

I donot think there is a standard report to List the materials (Or Articles in IS - Retail) by EAN numbers.
I do not know the Business requirement, but I can tell you that when you go to MM03 and ask for the list of matrials, you can select the materials based on the selection Criteria (List materials by EAN), which will give you all the matrials for which EAN has been maintained.
Unlucky. MM60 does not have the option you are looking
Hope this helps.
Regards
SS
Edited by: Shankar Shivappa on Mar 27, 2009 1:28 AM

Populating International Article Number (EAN/UPC) in PO

Hi Experts,
My requirement is to populate the field EAN/UPC in PO, with the value from the field 'OTHER NAME' present in the item line2 of the SRM shopping cart.
Can this be achieved by using the BADI - BBP_CREATE_BE_PO_NEW ? If so, can you please help me in identifying the appropriate field in CS_PO_DOCUMENT for populating the it in the backend PO.
Please help me with this issue.
Thanks in advance,
Best Regards,
Deepa

Hi,
Thanks for the reply.
The Omaterial has the main EAN number which is populated from MARA table .
The problem is when POS sends sales data with an EAN number ( main or otherwise) , it fails at POSDW.
I think it refers to some master data for validation like for article number it refers to 0Material.
Regards
Prasad

Warehouse receiving using vendor EAN/UPC code

Is it possible to capture the vendor EAN/UPC code and use this information to receive the goods in the warehouse/plant?
First issue would be how to deal with duplicate vendor EAN/UPC.
I have seen many posts where it is possible in IS-AFS but has anyone done this in standard R/3?
Thanks

You can certainly search by EAN/UPC when performing GR with MIGO. Click on the binoculars and it's the fifth field available to search via.
So as long as you have the code set against the material master . . .
Regards,
Nick

EAN/UPC code in the material master

Hi all,
Does anybody have the scenario where the UPC number of a product is the same as the SCC number displayed on the container that holds this product with the difference being the EAN category and the leading zeroes? For example: UPC of a bottle is 080686001409 with EAN category = UC (length = 12 digits) and SCC of the case is 00080686001409 with EAN category = SC (length = 14 digits). The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00080686001409 and ctg SC for example, SAP automatically changes it back to the first code 080686001409 and maintains ctg SC. So now I have the same code with 2 different categories (and one of them u2013 SC u2013 has an incorrect length).
Please let me know if you have this scenario and what you have done to solve it.
Thanks in advance!

Hi ,
I am also facing the same problem. The system not allowed saving the same EAN/UPC number for multiple SKUu2019s with varying number of leading zeros.
For example: UPC length 12 digits value like 085267207850 with EAN category Z3 and SCS length 14 digits value like 00085267207850 with EAN category Z5. The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00085267207850 and category Z5, SAP automatically changes it back to the first code 085267207850 and maintains category Z5. So now I have the same code with 2 different categories (and one of them u2013 Z5 u2013 has an incorrect length).
Could you please let me know what you have done to solve it.
Regards,
Ismail

EAN/UPC check digit creation with Direct Input

Hi Experts,
I am working on Material data transfer using Direct Input. Requirement is to update the EAN/UPC for each Alt. UOM in Additional data view of Material master.
Further we need to set Indicator for automatic Determining the check digit for EAN .
I got Direct IP structure BMMH8 and BMMH6 for transfeering this data but didnt got Indicator field which I can set to automatic determining the check digit for EAN
Please let me know how to pass indicator for finding the check digit automatically while creating materials using Direct Input method.
Thanks in Advance...
<i>-Harkamal</i>

Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV

EAN/UPC CODE and PURCHASING GRID

Hi Experts,
In material master can you please let me know how to configure,
1) EAN/UPC Code configuration in Material Master
2) Purchasing grid
I need the info urgently.
Regards,
Subha

Hi Subha,
1)The EAN/UPC's configuration is done in the path
SPRO>Logistics general>Material Master>Settings for key fields>Internal article numbers:
Here we can define external or internal number ranges for the EAN's.We can also define the prefix for EAN/UPCs and define the attributes of the EAN/UPCs.
2) Grids are used in AFS(Appearl and Footware system).There are material grid,purchase grid and sales grids in Appearl and footware industry.
We have to define Charecterstics and using them we have to define a grid(matrix type).While creating a material master this purchase grid has to be assigned in the AFSpurchasing view of the AFS material.
For example--Shirt(material)- Silk cloth white colour 40 size,Silk cloth golden colour 42 size,cotton cloth blue colour 40 size.Here cloth,colour,size are the 3 charecters.Using these 3 charecters a grid is created.This grid is assigned to the material.With this we can have n number of combinations for a single material.
Regards,
Rambhupal

EAN/UPC Number

hi friends,
how to track materials with deleated EAN/UPC numbers.???
which tables deleated UPC no's will store
regards
raj

thanks for ur replies
lets one mor doubt...
my material is flagged for deletion , and after some period of time created a new material(the
material is exactly sameas earlierone).
Now i want to use old UPC numbers for new materials.(Presently we r using internal number ranges). is ther any chance to use old upc numbers???
advance thanks
Edited by: raj rajan on Apr 13, 2010 8:55 PM
Edited by: raj rajan on Apr 14, 2010 5:58 PM

EAN/UPC# in Basic Data1

Similar Messages

Maybe you are looking for