Ean/UPC no is sales order

Hi Gurus,
I have one isse in which for every material UPC number has been attached but for one material EAN number has been attahced.
Can you please explain me regardingthe concept from where this field get populate

PM,
What our Friend said is correct it comes from Material master- Basic data 1 view. But for this you will have to do proceed with configuration settings in
IMG --> Logistics General --> Settings for Key Fields --> International Article numbers (EAN)
a. You will have to define number of ranges for EANs/UPCs
b. Define Prefixes
c. Define Attributes - (Define number or EAN CAtegories) its here you need to maintain internal or external
d. Define no ranges for perishables
you can maintain data internally or externally based on your config settings. I have tried it in my material master maintained EA - perishable EA Category in MM automatically an internal no got assigned in EAN field after saving i raise a sales order the no. is reflecting in my sales order item details under sales tab - field.
try it..
Regards
Sathya

Similar Messages

  • EAN/UPC field in sales order is grey field

    Dear all,
    when i am creating Sales Order, EAN/UPC field is grey field i cannot enter any value in that.
    I want to used these field, then how i can use these field.
    Also is there any specific purpose for the EAN/UPC field,where it is used.
    Regards,
    PM

    PM,
    What our Friend said is correct it comes from Material master- Basic data 1 view. But for this you will have to do proceed with configuration settings in
    IMG --> Logistics General --> Settings for Key Fields --> International Article numbers (EAN)
    a. You will have to define number of ranges for EANs/UPCs
    b. Define Prefixes
    c. Define Attributes - (Define number or EAN CAtegories) its here you need to maintain internal or external
    d. Define no ranges for perishables
    you can maintain data internally or externally based on your config settings. I have tried it in my material master maintained EA - perishable EA Category in MM automatically an internal no got assigned in EAN field after saving i raise a sales order the no. is reflecting in my sales order item details under sales tab - field.
    try it..
    Regards
    Sathya

  • How  to Activate EAN field in sales order

    Hi Guru's
    Can anybody give  me the T.code/path  for Activating the EAN field at the sales order level i.e in salesA tab in item overview screen.
    Thanks&regards,
    Nagendra

    Hello Nagendra,
    I wanted to know, in which scenario you need EAN field to be filled in Sales Order esp in Retail Scenario.
    You will really have to look at the business need on this.  In IS-Retail, you have multiple EANs for an article. Which EAN should SAP propose?
    Further in a business scenario When a customer is going to buy or order, the customer wouldn't buy the product looking at the EAN. So i am still curious to know.
    In case the business need is genuine, please raise OSS Note for the same.
    Regards

  • Issue with UPC codes in Inbound sales orders via EDI.

    Hi All
    We are on ECC 6.0. We have incoming sales orders through EDI IDOCS. In the incoming IDCO the customer can provide either of the following information in that sequence.
    1.  GTIN number
    2.  Customer material number
    3.  UPC code
    4.  Old Product code.
    We need to derive the correct material number for each customer. Now I can achieve this through standard material determination using material determination type access sequences in the order specified above. However I cannot do the same, as we need to use material determination for genuine promotions. For example I can maintain a material determination record to map UPC 123456789 to Material number ABC in SAP R/3. However we do have situation where in for a particular season or depending upon the ATP situation we may have to derive Material XYZ (SAP material number) in case customer orders material ABC. So in other words if I use material determination to derive my SAP material number for in-coming IDOCS based on UPC codes then I would need to have multi level material determination. I.e. From an IDOC for UPC code 1234566789 I derive material ABC and then for material ABC derive material XYZ.
    I tried setting up these two layers of material determination in the standard system. It is possible only if I use a substitution reason which copies the material entered as a sub-item. We do not want to maintain the sub-item in sales order and relevant documents for a lot of other reasons. Is there a way I can use standard Material determination/substitution to derive this multi level search without haveing to copy the sub-item in sales order? Am I missing some settings here? If not is it possiblt to suppress the sub item from being derived in SAP using some user exit in sales order processing?
    For an IDOC I could have used standard SAP tables to identify SAP material number based on UPC code. However the problem is we have multiple SAP material numbers assigned to one UPC code. So it is not possible to identify a unique material number just based on the UPC code.
    I would like to know if any of you experts have encountered a similar situation and if so what is the ideal way to resolve this issue. Any comments/suggestions/guidance is welcome. You can also reply at my e-mail id [email protected].
    Thanks

    Hi Daniel,
    Can you please which IDoc message type you are using to create sales order using IDoc?
    Also check in IDoc, what is the value of ACTION & EINKZ fields in segment E1EDP01?
    Regards,
    Amit

  • Updating EAN number for artcile within a sales order

    Hi Everyone,
    We are running SAP R/3 E, I have a situation where a sales order can be created using a material which does not have a EAN article number associated within MM.
    One particular partner gets their invoice by EDI and needs this field in the invoice, even if we update the material in MM02 with the EAN code its not copied through to the invoice, even if we cancel the invoice the same problem exists.  I can also look in the sales order and see that the EAN did not update in their either, it will do for new sales orders.
    Please can somebody advise how to get this though to my Invoice so it will appear in the IDOC?  If we have to cancel/re-invoice that's not a problem
    Many thanks

    Hi Arundel
    I am not sure whether the following links will be of helpful to you.  Anyway please go through that
    http://help.sap.com/saphelp_46c/helpdata/en/b9/738d4df73f11d2b442006094b9301e/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/54/998c9f66bf11d3955500a0c92f024a/frameset.htm
    Thanks
    G. Lakshmipathi

  • ORDERS05 IDoc User Exit - Create Sales Order

    Greetings,
    I'm working at a client where they are using the ORDERS05 IDoc in conjunction with the Process code ORDE to create customer finished goods sales orders in a 46C system. When the IDoc segment E1EDP19 is qualified with "003" and the article's UPC/EAN is supplied in the material field and conversion of the UPC to material is executed during processing when the sales order type is "ZEDI" however this conversion is not executed with any other sales order type, so I suspect a user exit routine however I checked the usual suspects.
    MM06E001
    VEDB0001
    MCP20008
    MM06E001
    VEDA0001
    But not code for the UPC to material conversion.
    Any insight is alway appreciated and rewarded.
    Thanks!

    Joseph,
    Take a look in the function module EXIT_SAPLVEDA_001, see if there's an include there. We have an include there containing our Customisations, including for the E1EDP19 segment.
    Cheers, Paul.

  • No initial load of Customers, Material and delta load of Sales Orders.

    Hi Experts,
    I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
    But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
    - Customer_main load, it was succesful, but no BP's of R/3 are available.
    - Material, it failed in SMW01, SMQ2, the errors are:
    Mat. for Initial Download: Function table not supported
    EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
    EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
    Plant xx is not assigned to a business partner
    - Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
    We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
    Thanks,
    -Pat

    Hi Ashvin,
    The error messages in SMW01 for MAterial initial load is :
         Mat. for Initial Download: Function table not supported
         EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
         EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
         Plant 21 is not assigned to a business partner
    I have done the DNL_PLANT load successfully. Why then the plant error?
    Some of the messages for BP:
    Messages for business partner 1331:
    No classification is assigned to business partner 1331
    For another,
         Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
         City Atlanta does not exist in country US
         Time zone EST_NA does not exist
         You are not allowed to enter a tax jurisdiction code for country US
         Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
    Till these 2 are not solved, I cannot go into the Sales order loads.
    Any ideas will be greatly appreciated.
    Thanks,
    -Pat

  • Sales order creation problem

    dear all my friends
    i want to create a sales order from the BAPi     BAPI_SALESORDER_CREATEFROMDAT2   but i want to but the  material bar code  instead of  material number in line item of table    ORDER_ITEMS_IN - EAN_UPC  put i found the flowing error
    EAN 4006381157926 does not match material  and unit of measure
    what should i do

    Seems like it's trying to input the scanned material number into the Unit of Measure field and hitting Enter. You need to configure your bar code scanner to hit tab after each scan Material number scan, Quantity Scan.

  • LSMW - Sales Order creation using IDoc

    Hello,
    I'm receiving a file containing different category of products and need to create a sales order (using IDoc or BAPI) per category. The input file contains UPC code, I use a SELECT statement to check the category and append the UPC code to the specific internal table .(one internal table per category). The issue I have is to do loop in all internal table and then to create a sales order. I have some difficulties to update item segment. Only one UPC is populated to the required segment. Please let me know if this could be done using LSMW.
    Thanks ! Thanks ! Thanks ! Thanks !
    Mehdi

    You can use program RVINVB10 ( Direct Input ) to create Sales Order , Before you run this program you will have to create a file with data in specific format.
    Read the documenatation of the program.
    LSMw can help in formatting the data but beetr write your own progarm to format data and then run above program as LSMW has limitations and I am not sure what type of file you are getting. In you custom program you will have more control.
    Cheers.

  • Populating International Article Number (EAN/UPC) in PO

    Hi Experts,
    My requirement is to populate the field EAN/UPC in PO, with the value from the field 'OTHER NAME' present in the item line2 of the SRM shopping cart.
    Can this be achieved by using the BADI - BBP_CREATE_BE_PO_NEW ? If so, can you please help me in identifying the appropriate field in CS_PO_DOCUMENT for populating the it in the backend PO.
    Please help me with this issue.
    Thanks in advance,
    Best Regards,
    Deepa

    Hi,
    Thanks for the reply.
    The Omaterial has the main EAN number which is populated from MARA table .
    The problem is when POS sends sales data with an EAN number  ( main or otherwise) , it fails at POSDW.
    I think it refers to some master data for validation like for article number it refers to 0Material.
    Regards
    Prasad

  • EAN/UPC# in Basic Data1

    Hello,
    Some basic information needed to understand the process better.
    Can you tell me in MM01 - material master if it is a requirement to use the UC# in the EAN/UPC field in Basic Data 1?
    Should the EAN/UPC field reflect what the customer is sending in on their orders?
    Thanks,
    Victor

    Hi,
    If you sell products to a distributor or a retailer, those products may need a UPC bar code that represents a "Global Trade Item Number (GTIN)
    In SAP, you have to define attributes for EAN Category say "UC" through SPRO
    Logistics General-Material Master-Setting for Key fields-International Article NumbersDefine attributes for EAN
    The following field has to be entered as per your requirement.
    EAN category
    Number range object
    Int. number range
    Ext. number range
    Check-digit algor.
    Fresh produce prefix
    EAN length
    W4EN is the tcode for creating number range for EAN codes.
    Please let me know if you have any questions.
    Thanks,
    Vasanthan

  • EAN/UPC CODE and PURCHASING GRID

    Hi Experts,
    In material master can you please let me know how to configure,
    1)    EAN/UPC Code configuration in Material Master
    2)    Purchasing grid
    I need the info urgently.
    Regards,
    Subha

    Hi Subha,
    1)The EAN/UPC's configuration is done in the path
    SPRO>Logistics general>Material Master>Settings for key fields>Internal article numbers:
    Here we can define external or internal number ranges for the EAN's.We can also define the prefix for EAN/UPCs and define the attributes of the EAN/UPCs.
    2) Grids are used in AFS(Appearl and Footware system).There are material grid,purchase grid and sales grids in Appearl and footware industry.
    We have to define Charecterstics and using them we have to define a grid(matrix type).While creating a material master this purchase grid has to be assigned in the AFSpurchasing view of the AFS material.
    For example--Shirt(material)- Silk cloth white colour 40 size,Silk cloth golden colour 42 size,cotton cloth blue colour 40 size.Here cloth,colour,size are the 3 charecters.Using these 3 charecters a grid is created.This grid is assigned to the material.With this we can have n number of combinations for a single material.
    Regards,
    Rambhupal

  • Inbound ORDERS05 IDoc - Create SD Sales Order (EDI)

    I having an issue in inbound ORDERS05 IDoc processing to create SD sales order where the sales unit of measure for the material is getting lost/replaced. We are sending sales unit of measure in the E1EDP01-MENEE field, we are also sending the material UPC in teh E1EDP19 (003) segment relying on UPC material determination rules to resolve the material for the sales order. During this process of material determination the sales unit of measure is getting lost/replaced. I know as if we send the actual SAP material in the E1EDP19 segment (no material determination required) the sales unit of measure is unchanged. In this SAP system multiple sales unit of measure are maintained for each individual UPC code. Just looking for input on where to look to resolve this, config, user exits, etc..

    I can't say for sure what you should be doing, as I don't know how you have setup your material master, or how your Customers order. We have some Customers that always want EAches, some that always want OUTers, then some who want whatever UOM is assigned to the GTIN (UPC) that they order, which could be one of several. We have our custom code in ZXVEDU03.
    Cheers, Paul.

  • EAN/UPC code.... CARTON-ID (13 digit)  as HU ID in EWM

    Hi All,
    My client currently uses EAN/UPC code.... CARTON-ID (13 digit) as an which vendor will print on CARTON and send it.
    Its  sap IS-Retails system . No HU-managed and No Sap WM managed.
    Now client is going for EWM impl, where it requires HU ID Number to automate follow-on process.  Client is asking US to use the same CARTON-ID  as HU ID in EWM process. ( we suggested to assign Number range to Vendors or Stick HU labels Manually at warehouse to automate the process)
    It is possible to use CARTON-ID as HU ID number in EWM?  kindly suggest very urgent.
    Thanks in Advance

    Hi Rahman,
    Lets assume you are dealing with outbound deliveries and you have raised an outbound delivery in ERP and this gets replicated to EWM.
    When you do the picking and packing for this delivery, it would look for packing profile behind the Warehouse order and when it creates an HU, it asks for HU or takes it from preceding document.
    This again depends on the Number range you defined.
    There is a BADI /SCWM/EX_WHO_DSTGRP, which you could control to pass your own HU id here(Could be for example your carton ID).
    You could use similar concept with slight modifications during your goods receipt also.
    Regards,
    Kishore

  • Open Sales Orders Backlog Report

    Hi All: I have been asked to create Backlog reports for Open Sales Orders and the revenue amounts for the next 15days, one month, 2 months, 3 months 6 months etc etc. Does anyone know of a standard report that covers that and the business content and cues that go with it?
    Thanks in advance
    Bobby

    I haven't seen any standard content for it, with my client, we actually developed the open order report from Item extractor and status extractor. And compare the created on date to the system data to see how long it has been opened for and put it in different buckets.
    Hopes that help.
    thanks.
    Wond.

Maybe you are looking for