EAN + UPC on same material

Is is possible to get a UPC and EAN assigned to one material? Can the both be added to the BOM and/or how can correct one be chosen during production?
Any advise?
G

Hello
Assuming you have defined an EAN (EAN Category = 'HE' = Manufacturer EAN) for the material in the "Basic Data 1" view then you can assign the UPC within the "Additional Data ->  Units of Measure".
Assumption: Base UoM is CS (= Case).
Then you define a ratio of 1CS : 1CS an assign the UPC (NUMTYP = 'UC').
However, I cannot tell you if and how the UPC can be dragged into the BOM.
Regards
  Uwe
PS: Obviously it is possible, too, to use the UPC in "Basic Data 1" and assign the EAN within "Units of Measure".

Similar Messages

  • EAN/UPC values for material creation

    Hi,
    What all values we can give for EAN/UPC?
    I have given 00066800543215 for one material. When I tried to give the same value for another material, I am getting " EAN value is already used for so and so material"
    Could you please tell me, what all values we can give for EAN/UPC.
    Regards
    Sara

    EAN/UPC number is unique for a given material. So one EAN/UPC ( international artical number) number can't be assign to two material. so check whether this ean number is used in correct material and if not then remove from the material it is used and assign to this number.

  • EAN/UPC code in the material master

    Hi all,
    Does anybody have the scenario where the UPC number of a product is the same as the SCC number displayed on the container that holds this product with the difference being the EAN category and the leading zeroes? For example: UPC of a bottle is 080686001409 with EAN category = UC (length = 12 digits) and SCC of the case is 00080686001409 with EAN category = SC (length = 14 digits). The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00080686001409 and ctg SC for example, SAP automatically changes it back to the first code 080686001409 and maintains ctg SC. So now I have the same code with 2 different categories (and one of them u2013 SC u2013 has an incorrect length).
    Please let me know if you have this scenario and what you have done to solve it.
    Thanks in advance!

    Hi ,
    I am also facing the same problem. The system not allowed saving the same EAN/UPC number for multiple SKUu2019s with varying number of leading zeros.
    For example: UPC length 12 digits value like 085267207850 with EAN category Z3 and SCS length 14 digits value like 00085267207850 with EAN category Z5. The number is externally assigned. SAP does not let you enter these 2 codes in the master data. When you enter the second code, 00085267207850  and category Z5, SAP automatically changes it back to the first code 085267207850 and maintains category Z5. So now I have the same code with 2 different categories (and one of them u2013 Z5 u2013 has an incorrect length).
    Could you please let me know what you have done to solve it.
    Regards,
    Ismail

  • EAN/UPC Number

    hi friends,
    how to track materials with deleated EAN/UPC numbers.???
    which tables deleated UPC no's will store
    regards
    raj

    thanks for ur replies
    lets one mor doubt...
    my material is flagged for deletion , and after some period of time  created a new material(the
    material is exactly sameas earlierone).
    Now i want to use old UPC numbers for new materials.(Presently we r using internal number ranges). is ther any chance to use old upc numbers???
    advance thanks
    Edited by: raj rajan on Apr 13, 2010 8:55 PM
    Edited by: raj rajan on Apr 14, 2010 5:58 PM

  • Warehouse receiving using vendor EAN/UPC code

    Is it possible to capture the vendor EAN/UPC code and use this information to receive the goods in the warehouse/plant?
    First issue would be how to deal with duplicate vendor EAN/UPC.
    I have seen many posts where it is possible in IS-AFS but has anyone done this in standard R/3?
    Thanks

    You can certainly search by EAN/UPC when performing GR with MIGO. Click on the binoculars and it's the fifth field available to search via.
    So as long as you have the code set against the material master . . .
    Regards,
    Nick

  • Issue with EAN/UPC field in "BAPI_MATERIAL_SAVEDATA"

    Hello guys,
    I have a requirement where I am using the BAPI_MATERIAL_SAVEDATA to create a new material by using a reference material. The question is how can i pass EAN/UPC field into it?
    This field exists in Basic Data1 tab in MM01 screens. I am not getting how to pass values into the INTERNATIONALARTNOS type BAPI_MEAN ?? This is there as table parameters in the BAPI?
    Please advice

    Hi
    Issue with BAPI_MATERIAL_SAVEDATA
    Bapi_material_savedata help with parameters
    Regards
    Pavan

  • EAN/UPC check digit creation with Direct Input

    Hi Experts,
    I am working on Material data transfer using Direct Input. Requirement is to update the EAN/UPC for each Alt. UOM in Additional data view of Material master.
    Further we need to set Indicator for automatic Determining the check digit for EAN .
    I got Direct IP structure BMMH8 and BMMH6 for transfeering this data but didnt got Indicator field which I can set to automatic determining the check digit for EAN
    Please let me know how to pass indicator for finding the check digit automatically while creating materials using Direct Input method.
    Thanks in Advance...
    <i>-Harkamal</i>

    Hi,
    Thnaks for your reply, This is my requirement.
    Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
    Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
    here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
    when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
    then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
    then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
    So could u help me in this it will be gr8.
    Thanks & Regards,
    RamNV

  • EAN/UPC# in Basic Data1

    Hello,
    Some basic information needed to understand the process better.
    Can you tell me in MM01 - material master if it is a requirement to use the UC# in the EAN/UPC field in Basic Data 1?
    Should the EAN/UPC field reflect what the customer is sending in on their orders?
    Thanks,
    Victor

    Hi,
    If you sell products to a distributor or a retailer, those products may need a UPC bar code that represents a "Global Trade Item Number (GTIN)
    In SAP, you have to define attributes for EAN Category say "UC" through SPRO
    Logistics General-Material Master-Setting for Key fields-International Article NumbersDefine attributes for EAN
    The following field has to be entered as per your requirement.
    EAN category
    Number range object
    Int. number range
    Ext. number range
    Check-digit algor.
    Fresh produce prefix
    EAN length
    W4EN is the tcode for creating number range for EAN codes.
    Please let me know if you have any questions.
    Thanks,
    Vasanthan

  • EAN/UPC Table for materials

    Hi,
    Please help me to find the materials without the UPC/EAN code maintained in the Additional data of material master.I even tried with the table "MEAN",but this table only contains the data having maintained for the grid values of the materials.
    Please help me finding the materials where the EAN/UPC code is not maintained per grid value .
    Please help..

    Hi,
    Through the table "MARM",i can only see the UPC/EAN codes equivalent to the data present in the basic data of the material master.
    But i am not able to get the grid values for which the EAN/UPC is not maintained in the additional data of material master.
    MEAN table only takes of the data if maintained in the additional data of material master for the grid values of the material
    Please help...

  • EAN/UPC CODE and PURCHASING GRID

    Hi Experts,
    In material master can you please let me know how to configure,
    1)    EAN/UPC Code configuration in Material Master
    2)    Purchasing grid
    I need the info urgently.
    Regards,
    Subha

    Hi Subha,
    1)The EAN/UPC's configuration is done in the path
    SPRO>Logistics general>Material Master>Settings for key fields>Internal article numbers:
    Here we can define external or internal number ranges for the EAN's.We can also define the prefix for EAN/UPCs and define the attributes of the EAN/UPCs.
    2) Grids are used in AFS(Appearl and Footware system).There are material grid,purchase grid and sales grids in Appearl and footware industry.
    We have to define Charecterstics and using them we have to define a grid(matrix type).While creating a material master this purchase grid has to be assigned in the AFSpurchasing view of the AFS material.
    For example--Shirt(material)- Silk cloth white colour 40 size,Silk cloth golden colour 42 size,cotton cloth blue colour 40 size.Here cloth,colour,size are the 3 charecters.Using these 3 charecters a grid is created.This grid is assigned to the material.With this we can have n number of combinations for a single material.
    Regards,
    Rambhupal

  • EAN/UPC field in sales order is grey field

    Dear all,
    when i am creating Sales Order, EAN/UPC field is grey field i cannot enter any value in that.
    I want to used these field, then how i can use these field.
    Also is there any specific purpose for the EAN/UPC field,where it is used.
    Regards,
    PM

    PM,
    What our Friend said is correct it comes from Material master- Basic data 1 view. But for this you will have to do proceed with configuration settings in
    IMG --> Logistics General --> Settings for Key Fields --> International Article numbers (EAN)
    a. You will have to define number of ranges for EANs/UPCs
    b. Define Prefixes
    c. Define Attributes - (Define number or EAN CAtegories) its here you need to maintain internal or external
    d. Define no ranges for perishables
    you can maintain data internally or externally based on your config settings. I have tried it in my material master maintained EA - perishable EA Category in MM automatically an internal no got assigned in EAN field after saving i raise a sales order the no. is reflecting in my sales order item details under sales tab - field.
    try it..
    Regards
    Sathya

  • Ean/UPC no is sales order

    Hi Gurus,
    I have one isse in which for every material UPC number has been attached but for one material EAN number has been attahced.
    Can you please explain me regardingthe concept from where this field get populate

    PM,
    What our Friend said is correct it comes from Material master- Basic data 1 view. But for this you will have to do proceed with configuration settings in
    IMG --> Logistics General --> Settings for Key Fields --> International Article numbers (EAN)
    a. You will have to define number of ranges for EANs/UPCs
    b. Define Prefixes
    c. Define Attributes - (Define number or EAN CAtegories) its here you need to maintain internal or external
    d. Define no ranges for perishables
    you can maintain data internally or externally based on your config settings. I have tried it in my material master maintained EA - perishable EA Category in MM automatically an internal no got assigned in EAN field after saving i raise a sales order the no. is reflecting in my sales order item details under sales tab - field.
    try it..
    Regards
    Sathya

  • EAN/UPC No

    Dear all,
    As per the client requirement The EAN No. in Material/ Article master should get Automatically assignet to material/article during the creation of material/article Master
    E.g My Article No is ABCDEF10032146 , The EAN.UPC No 10032146 should get automatically assigned to this article/material
    I dont was EAN should get derived internally.
    can anyone tell me how to achieve this
    Thanks and Regards
    Tara

    Hi ,
    Check
    IMg>Logistics - General>Basic Settings>Settings for Key Fields>International Article Numbers (EANs)-->Define Number Ranges for EANs/UPCs
    and make it external.
    and also check
    IMg>Logistics - General>Basic Settings>Settings for Key Fields>International Article Numbers (EANs)-->Define Attributes of EANs/UPCs.  Here autually you assign No. range interval to EAN category.
    Regards,
    Anupam

  • EAN/UPC code.... CARTON-ID (13 digit)  as HU ID in EWM

    Hi All,
    My client currently uses EAN/UPC code.... CARTON-ID (13 digit) as an which vendor will print on CARTON and send it.
    Its  sap IS-Retails system . No HU-managed and No Sap WM managed.
    Now client is going for EWM impl, where it requires HU ID Number to automate follow-on process.  Client is asking US to use the same CARTON-ID  as HU ID in EWM process. ( we suggested to assign Number range to Vendors or Stick HU labels Manually at warehouse to automate the process)
    It is possible to use CARTON-ID as HU ID number in EWM?  kindly suggest very urgent.
    Thanks in Advance

    Hi Rahman,
    Lets assume you are dealing with outbound deliveries and you have raised an outbound delivery in ERP and this gets replicated to EWM.
    When you do the picking and packing for this delivery, it would look for packing profile behind the Warehouse order and when it creates an HU, it asks for HU or takes it from preceding document.
    This again depends on the Number range you defined.
    There is a BADI /SCWM/EX_WHO_DSTGRP, which you could control to pass your own HU id here(Could be for example your carton ID).
    You could use similar concept with slight modifications during your goods receipt also.
    Regards,
    Kishore

  • Free Goods for multiple line items of the same material

    Hi Friends,
    We have configured Free Goods to a particular material in such a way that if the customer orders 100 qty of Material A then he gets 10 qty of Material B free. This is working fine if there is only one line item of Material A with qty more than 100.
    However, if the order is created in such a way that there are two line items of material A for 50 qty each then the system is not giving the free material B, even though the total ordered qty in the sales order for material A is 100.
    How can this be configured in the system? Please Help.
    Regards,
    Abhishek

    What is the purpose of giving the same material as second line item.
    specify in the first line item itself.
    or els the condition record which you have specified that for 100 material of A gives 10 material of B modify it to 10 of A should give 1 material of B
    The first you will be useful for you.

Maybe you are looking for

  • Pro res 422 footage to be edited on windows 7 in Premiere CS6

    Will I run into any trouble importing and reading/editing this footage? I won't need to export to the same format. .mov will be just fine when all is edited. Thanks for your help.

  • BLACKBERRY APP WORLD LOGIN ISSUES

    A friend of mine was helping me with blackberry app world on my blackberry torch. I had never creaetd an account yet so they logged into the APP world using their own id and downloaded some apps to my phone for me. I have since created my own blackbe

  • Intercomany Asset Transfer - Cross System

    Hi All, We have a requirement to do intercompany transfer of assets across system. One company code is in one system and the other one is in different instance. I researched on SCN and got to know about ALE scenarios for Cross-System Asset Transfer.

  • IWeb won't seem to accept an HTML Snippet

    I've just downloaded the following Snippet from 6sense.com. <applet archive="snowshow.jar" code="snowshow.class" width=830 height=999> <param name="density" value="low"> <param name="id_key" value="6s890667530995822119"> <param name="maximages" value

  • Hy does loading a web page in Firefox causes my external hard disk to spin up?

    On OSX 10.6 and 10.7, Firefox will not load a web page unless my external hard disk spins up. My thought is that Firefox is trying to cache or pre-fetch something, but why is it doing it on my external backup drive? No other browser does this. Only F