EAP-FAST on Local Radius Server : Can't Get It Working
Hi all
I'm using an 877w router (flash:c870-advsecurityk9-mz.124-24.T4.bin) as local radius server and have followed various config guides on CCO. LEAP works fine but I just can't get EAP-FAST to work.
I'm testing with win7 client using anyconnect secure mobility client, and also a mac book pro but without luck.
the router sees unknown auth type, and when I run some debugs it talks of unknown eap type 3
sh radius local-server s
Successes : 1 Unknown usernames : 0
Client blocks : 0 Invalid passwords : 0
Unknown NAS : 0 Invalid packet from NAS: 17
NAS : 172.27.44.1
Successes : 1 Unknown usernames : 0
Client blocks : 0 Invalid passwords : 0
Corrupted packet : 0 Unknown RADIUS message : 0
No username attribute : 0 Missing auth attribute : 0
Shared key mismatch : 0 Invalid state attribute: 0
Unknown EAP message : 0 Unknown EAP auth type : 17
Auto provision success : 0 Auto provision failure : 0
PAC refresh : 0 Invalid PAC received : 0
Can anyone suggest what I might be doing wrong?
Regs, Tim
Thanks Nicolas, relevant snippets from config:
aaa new-model
aaa group server radius rad_eap
server 172.27.44.1 auth-port 1812 acct-port 1813
aaa authentication login eap_methods group rad_eap
aaa authorization exec default local
aaa session-id common
dot11 ssid home
vlan 3
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
ip dhcp pool home
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 194.74.65.68 194.74.65.69
ip inspect name ethernetin tcp
ip inspect name ethernetin udp
ip inspect name ethernetin pop3
ip inspect name ethernetin ssh
ip inspect name ethernetin dns
ip inspect name ethernetin ftp
ip inspect name ethernetin tftp
ip inspect name ethernetin smtp
ip inspect name ethernetin icmp
ip inspect name ethernetin telnet
interface Dot11Radio0
no ip address
encryption vlan 1 mode ciphers aes-ccm tkip
encryption vlan 2 mode ciphers aes-ccm tkip
encryption vlan 3 mode ciphers aes-ccm tkip
broadcast-key vlan 1 change 30
broadcast-key vlan 2 change 30
broadcast-key vlan 3 change 30
ssid home
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio0.3
encapsulation dot1Q 3
no cdp enable
bridge-group 3
bridge-group 3 subscriber-loop-control
bridge-group 3 spanning-disabled
bridge-group 3 block-unknown-source
no bridge-group 3 source-learning
no bridge-group 3 unicast-flooding
interface Vlan3
no ip address
bridge-group 3
interface BVI3
ip address 192.168.1.1 255.255.255.0
ip inspect ethernetin in
ip nat inside
ip virtual-reassembly
radius-server local
no authentication mac
nas 172.27.44.1 key 0 123456
user test1 nthash 0 B151E8FF684B4F376C018E632A247D84
user test2 nthash 0 F2EEAE1D895645B819C9FD217D0CA1F9
user test3 nthash 0 0CB6948805F797BF2A82807973B89537
radius-server host 172.27.44.1 auth-port 1812 acct-port 1813 key 123456
radius-server vsa send accounting
Similar Messages
-
EAP-FAST with local radius on 1242AG
I'm trying to get EAP-FAST working using the local radius server on a 1242AG autonomous AP using the latest firmware from Cisco. The cypher I'm using is CCMP. LEAP works fine with all my clients, however if I move to EAP-FAST in the radius config my clients fail to authenticate
I know I need to set PAC to automatic somewhere, but the EAP-FAST configuration in the 1242AG GUI doesn't make this clear what to do.
Any help or a basic example you be great.
thanks,
SimonI think this is what you're looking for;
Local EAP Authentication on the Wireless LAN Controller with EAP-FAST and LDAP Server Configuration Example
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml
HTH
Regards,
Jatin
Do rate helpful posts~ -
Autonomous AP, 12.3.8JE3. EAP-FAST on local radius failure
Hi all,
I've been trying to configure EAPFAST on Autonomous AP 1242 with the above firmware using local radius. Here are the config:
aaa new
aaa group server radius rad_eap
server x.x.x.x auth 1812 acct 1813
aaa authentication login eap_methods group rad_eap
dot11 ssid EAPFAST
vlan 10
authentication open eap eap_methods
authentication key wpa
int d0
encryption vlan 10 mode cipher aes
ssid EAPFAST
no shut
int d0.10
en do 10
bridge 10
int f0.10
en do 10
bridge 10
int f0.100
en do 100 na
bridge 1
int bvi
ip add x.x.x.x 255.255.255.0
radius-server local
eapfast authority info XYZ
eapfast server-key primary auto
nas x.x.x.x key ####
group FAST
eapfast pac expiry 2 grace 2
username eapfast password eapfast group FAST
radius-server host x.x.x.x auth 1812 acct 1813 key ####
For all my tests, I can get the 7921 phone to work. But using CSSC or even win7 supplicant, I can never get the authentication to go through. I think the eap authentication is stuck at pac provisioning. If i am to manual provision the pac using tftp, it will work. Any clue?
AlvinHi,
I was thinking it might be a firmware issue because during some debugs with pac provisoning, there are some errors reporting of some missing cipher suites. I shall try with a new firmware.
Alvin -
RFC Server - Can't get to work
I will prefice this by saying I am an ABAP developer with very little VB.Net experience. Basically I am trying to write an application that will be called from SAP, perform a routine and return some values back to SAP. In order to prepare for this I am trying to do the sample tutorial that came with the SAP .Net Connector documentation (called "How to Build a Simple RFC Server in .NET"). I have gotten to step 4 without many problems, but I am having trouble finding out where to put the "Command Line Arguments" in the "Set Logon Parameters for your SAP Server" step. If I go to "ConsoleApplication1" properties pages under "Configuration Properties" there is a place for command line arguments (it is under "Debug"). Is this where I am to put my arguments? When I run the console do these arguments get executed? Also, what is the best way to deploy this to the application server?
Thanks for any help you can provide!When you run the exe file from server, you have to pass those paramters in the command line only.
For Example:
C:\>ConsoleApplication1 -a<registerd name> -g<servername> -x<Gateway Service>
We have created a batch file (.BAT) with the above command line parameters. You should make sure that this exe file run always.
I have read somewhere, it says EXE file can be converted into windows services and deploy it. I have not used this. Let me know if you get this.
Thanks & Regards,
Govind. -
Problems w/config AP1200 - WPA Enterprise/Local RADIUS Server
I have been attempting to reconfigure a AP1200 in our lab environment from using static WEP keys to WPA/TKIP. I can make the solution work with WPA-PSK, but not enterprise. I believe I have everything configured correctly but cannot "validate identity" on the client. Below are the details to my configuration.
SSID: labssid (Open authentication with EAP)
Cipher: TKIP
Key management: Mandatory (WPA)
I have a Cisco ACS server but am attempting to get this running intially using the local RADIUS server on the Access Point. I have a user defined locally called "test" with a password of "test".
I am using an IBM ThinkPad T43 with the built-in wireless (Intel PRO/Wireless 2915ABG NIC) for testing. I have the "Use Windows to configure my wireless network settings" checked so I am using the inherant Windows configuration screens. However, I have also attempted to use the IBM NIC configuration utility and receive the same failures. I have the client device configured as follows:
1. Network authentication: WPA
2. Data encryption: TKIP
3. Authentication: Protected EAP (PEAP) (only option other than smartcard, cert.)
3a. (PROPERTIES) - AuthMethod: Secured Password (EAP-MSCHAP v2)
4. Authenticate as computer whe computer information is avail (UNCHECKED)
5. Authenticate as guest when user or computer is unavailable (UNCHECKED)
When I attempt to provide my test/test credientials the Access Point logs the following:
Station 0016.6f77.9ccd Authentication failed
When I look at the Local RADIUS server stats, for each authentication failure the following stat is recorded:
"Unknown EAP Type"
If I try to authenticate 5 times, there will be 5 Unknown EAP Type stats logged.
What am I missing?I didn't realize the local RADIUS couldn't do PEAP. That makes sense now, as in testing I decided to point the AP at my ACS server and was able to authenticate. I'm having an issue authenticating at times because it seems the AP looses it's connection TO the ACS server. The Access Point logs the following:
1. Station 0016.6f77.9ccd Authentication failed
2. RADIUS server 192.168.102.82:1645,1646 has returned.
3. RADIUS server 192.168.102.82:1645,1646 is not responding.
The "not responding" and "returned" logs are recorded at the exact same time period. In my most recent case, it was "Aug 31 18:19:36.981". Both have that time stamp. It's as if the AP looses some heartbeat to the RADIUS server and doesn't check to see if it's alive until a certain interval. When I'm not able to authenticate, if I log into the ACS and manually "restart" the services through the GUI, I authenticate right away. I'm thinking this is an ACS issue not an AP issue, but am wondering if anyone else has ever noticed this behavior. -
1240AG as WDS & Local Radius Server
Have 5 1240AG's and want to use one as WDS and Local Radius Server.
Am using the following as a guide:
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml#hw
The above example uses a Cisco Secure ACS and designates both an AP and a WSLM as the WDS. I just want to use the AP as the WDS.
Isn't it possible to do the whole thing just using a 1240AG as both the WDS and Local Radius Server and not use a Cisco Secure ACS or WSLM?
Is there an online guide for such a thing? (looked, didn't find it)
Appreciate the guidance
CheersThanks, that's what I thought.
I had found the WDS setup link but wasn't sure if I was missing something.
The link you provided for the Local Radius Server setup is for "partners" only I believe? Can't access it.
But I think I should be able to find some guides/examples somewhere else in the archives. I'm starting w/ these 2 links;
https://www.cisco.com/en/US/products/ps6521/prod_configuration_examples_list.html
and
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c0912.shtml
Appreciated the heads up about port 1812. -
Local radius server : one username for several devices ?
I've just installed a AP 1231g as a local radius server and I've got two devices that are authenticated by the AP with the same username/password .
is not there a problem?Hi,
Problem ?? no there is no issues. You are using a single user name to access network devices.
Regards,
~JG
Please rate if helps -
i want to buy an ipad 2 3G but i am not a US resident, how can i get to work on a local network NOT verizon or AT&T
From your screen name would it be safe to guess that you will be using it in Egypt? If your carrier uses is a GSM network you can do as Chris suggests.
From the Apple page http://www.apple.com/eg/buy/ there is a link to Arab Buisness Machine, they sell the iPad 2 and offer local support should any problems arise. -
How can we get ADFSecurity work when used in OC4J, OID and OAM?
I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal -
Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?
The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products -
Can't get Mail working properly
I just got my new MacPro this week, and it's really great except for I can't get Mail working right. I've set up my accounts and a few emails come through, though not many, and because it's been a week since I've been online, there should be many more than that. Also, I can't send any emails at all, no matter what I do. They will eventually go into my Sent box, but I've been sending them to myself to see if it's working, and they never come through. I spent an hour on the phone yesterday with the tech support for my ISP, and they told me that I'd have to talk to the Apple techs because they didn't have current info for *Mail 3.1*, the version I have, that the latest they had was for 2.something. So I called the Apple tech support and spent 2 hours on the phone with them, and they weren't able to help me get it going correctly either. It keeps giving me error messages such as Connection Failed, or Unable to Receive Mail, saying "there may be a problem with the mail server or network" and that "the connection to the server on ... port has timed out." I'm on DSL and am always online, so I know it's not the internet connection that's the problem. Can anybody give me some advice on what I should try? Any help will be gratefully appreciated!
Is your ISP Verizon, Demon, or Glocalnet, then it might be Apples biggest Leopard Bug in conjunction with these ISP:s POP-servers.
The one that randomly changes the settings in "advanced" from "password" to "APOP".
The visual result of this bug is that you will get a popup-box where Mail asks you to enter your password. (Which is useless entering, since the preference settings are changed.)
My advice counts only when you are supposed to use "password" as the correct setting in "Advanced" and in conjunction with some ISP:s.
Michael -
Can't get webutil working on AS
Hi All,
As topic, I can't get webutil working on the application server. I can run individual forms or sessions that do not utilise webutil. As soon as I have baseHTMLjinitiator/baseHTMLjpi/baseHTML defined in the bit of the formsweb.cfg that I am using, I get this problem. The webutiljini.htm etc are located in the forms/server directory as they should be.
I've got it working fine on my 10.1.2 developer suite XP platform.
I've been trying without success on the App Server. Version 10.1.2 under Win2003
I have been right through the installation instructions several time trying to see what I have missed.
I have installed version 1.0.6 of webutil and version 1.8 of jacob.
I try and run the wu_test_106 form, and all I get is "Applet Started" at the bottom of the browser window, and a blank browser window.
My URL is
http://10.64.125.51:7778/forms/frmservlet?config=webutil1
The config in the formsweb.cfg is:
[webutil1]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=generic
form=wu_test_106.fmx
width=100%
height=100%
separateFrame=True
The other parameters are default. If I try a different form name it makes no difference.
I've done the other configuration stuff, default.env, signing jar files, etc.
The java console just shows:
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\griggto01
Proxy Configuration: Manual Configuration
Proxy:
Proxy Overrides:
JAR cache enabled
Location: C:\Documents and Settings\griggto01\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://10.64.125.51:7778/forms/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Thanks for your help.
TonyHi Tony,
Form your post it doesn't look like jacob.jar is being loaded. Can you confirm that you have the following files in the <ORACLE_AS>/forms directory:
java\
jacob.jar
frmwebutil.jar
webutil\
d2kwut60.dll
jacob.dllAlso open up your default.env file and check that
ORACLE_HOME -- is correct
FORMS_PATH -- has the path where wu_test_106.fmx is located
WEBUTIL_CONFIG -- is correct (I've experienced what you describe when this path was invalid)
CLASSPATH -- contains frmwebutil.jar
Regards
Tom Casserly -
Can't get my work email to load on my new phone
I can't get my work email onto my Droid X. Anyone know the trick?
Carl3 wrote:
I can't get my work email onto my Droid X. Anyone know the trick?
First quesiton I have is do you have authorization to access your work email from your Droid X? Just knowing the email address and password is enough for you to get your personal email, but your employer must approve remote access.
If it's okay with your employer, you may also need to know the incoming and outgoing email server addresses, the port number, and your username on your employer's email server. If you're not sure what they are, check with your IT admin AFTER you get confirmation that it's okay to get your email. -
Activatable RMI - can not get to work
Hi
I am desperate to get activatable RMI to work. I tried the Sun tutorial example and even that I can not get to work.
I would really appreciate it if someone can highlight where my stupidity lies.
Here are my sources:
Remote Interface:
package compute;
public interface Compute extends java.rmi.Remote
void executeTask() throws java.rmi.RemoteException;
Client code:
package client;
import compute.*;
import java.rmi.*;
public class Client
public static void main(String[] args)
if (System.getSecurityManager()==null)
System.setSecurityManager(new RMISecurityManager());
try
Compute comp=(Compute) Naming.lookup("//"+args[0]+"/ComputeIT");
comp.executeTask();
System.out.println("returned");
catch (Exception e)
System.out.println("Exception caught!");
System.out.println(e.getMessage());
Server Implementation:
package actengine;
import compute.*;
import java.rmi.*;
import java.rmi.activation.*;
public class ActServerImp extends Activatable implements Compute
public ActServerImp(ActivationID id,
MarshalledObject mobj) throws RemoteException
super(id,0);
public void executeTask() throws RemoteException
return;
Server Setup program:
package actengine;
import compute.*;
import java.rmi.*;
import java.rmi.activation.*;
import java.util.Properties;
public class ActServerSetup
public static void main(String args[])
try
System.setSecurityManager(new RMISecurityManager());
Properties props=new Properties();
props.setProperty("java.security.policy",
"/u/pretora/java/rmi/actsrv/security.policy");
ActivationGroupDesc.CommandEnvironment ace = null;
ActivationGroupDesc agd=new ActivationGroupDesc(props,ace);
ActivationGroupID agi=ActivationGroup.getSystem().registerGroup(agd);
// ActivationGroup.createGroup(agi,agd,0);
String location="file:/u/pretora/java/rmi/actsrv/";
MarshalledObject data=null;
ActivationDesc ae=
new ActivationDesc(agi,"actengine.ActServerImp",location,data);
Compute cri=(Compute)Activatable.register(ae);
System.out.println("Remote reference obtained");
Naming.rebind("ComputeIT",cri);
System.out.println("Remote reference bound to registry");
// System.exit(0);
catch (Exception e)
System.out.println("ActServerSetup caught "+e);
e.printStackTrace(System.out);
If I run the lot (rmiregistry and rmid (with security pol!)) I get the following exception on the server side:
java.io.StreamCorruptedException: InputStream does not contain a serialized obje
.at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:855)
.at java.io.ObjectInputStream.<init>(ObjectInputStream.java:174)
.at sun.rmi.server.MarshalInputStream.<init>(MarshalInputStream.java:102)
.at sun.rmi.server.ActivationGroupInit.main(ActivationGroupInit.java:52)
the client side just times out:
failed to activate object; nested exception is:
java.rmi.activation.ActivationException: timeout creating child process
It does work if I uncomment the 2 commented lines in the server setup progam and let rmid use the setup program's JVM to instantiate the ActServerImp.
Any ideas much appreciated. ThanksI finally found my problem. By changing the codebase string in ActServerSetup.java from file:/// to http:// URL, I was able to see in Apache HTTP server's log the 404 errors for my interface classes. The line that read
String location="file:/u/pretora/java/rmi/actsrv/";
had to be changed to
String location="file:///u/pretora/java/rmi/actsrv/ file:///u/pretora/java/rmi/common/";
Now I am all set.
thanks -
Can t get to work tint2 launcher
I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
i've set up the panel the way i want but i would like to have a few launcher
I've try serveral thing but i can't get it to work,
and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
tks
Here my tint2rc
# TINT2 CONFIG FILE
# horizontal panel
# squared taskbars
# idirae config
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #808080 20
border_color = #ffffff 10
# ID 2 - task active
rounded = 0
border_width = 0
background_color = #feffff 0
border_color = #d8d8d8 0
# ID 3 - task
rounded = 0
border_width = 0
background_color = #F5F5DC 0
border_color = #000000 0
# ID 4
rounded = 0
border_width = 1
background_color = #888888 0
border_color = #ED2323 60
# ID 5 - taskbar
rounded = 0
border_width = 1
background_color = #feffff 10
border_color = #ffffff 10
# ID 6 - active taskbar
rounded = 0
border_width = 1
background_color = #feffff 30
border_color = #ffffff 30
# ID 7 - tooltip
rounded = 3
border_width = 0
background_color = #222222 90
border_color = #222222 90
# ID 8
rounded = 0
border_width = 1
background_color = #888888 20
border_color = #888888 20
# Panel
panel_monitor = all
panel_position = top left horizontal
panel_items = LTSBC
panel_size = 100% 32
panel_margin = 0 1
panel_padding = 3 3
panel_dock = 0
wm_menu = 1
panel_layer = bottom
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 1.5
autohide_height = 6
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 5 2
taskbar_background_id = 5
taskbar_active_background_id = 6
taskbar_name = 1
taskbar_name_background_id = 0
taskbar_name_active_background_id = 0
taskbar_name_font = Crisp 12
taskbar_name_font_color = #ffffff 30
taskbar_name_active_font_color = #ffffff 50
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 0
task_centered = 1
task_maximum_size = 20 20
task_padding = 0 0
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 4
task_iconified_background_id = 3
# Task Icons
task_icon_asb = 80 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 80 0 0
# Fonts
task_font = BankGothic Md BT 10
task_font_color = #696969 60
task_active_font_color = #696969 100
task_urgent_font_color = #696969 100
task_iconified_font_color = #696969 60
font_shadow = 0
# Launcher
launcher_icon_theme = elementary
launcher_padding = 2 2
launcher_background_id = 1
launcher_icon_size = 20
# Specify icon theme names with launcher_icon_theme.
# if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
#launcher_icon_theme = AwOkenWhite
# Each launcher_item_app must be a full path to a .desktop file
launcher_item_app = /usr/share/applications/chromium.desktop
launcher_item_app = /usr/share/applications/gparted.desktop
# Clock
time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
time1_format = %I:%M %p
time1_font = BankGothic Md BT 9
#time2_format = %A, %B %d
#time2_font = Ubuntu-L 7
clock_font_color = #ffffff 80
clock_padding = 5 0
clock_background_id = 5
clock_lclick_command = gsimplecal
#lock_rclick_command =
# System Tray
systray = 1
systray_padding = 2
systray_sort = right2left
systray_background_id = 5
systray_icon_size = 20
systray_icon_asb = 100 0 0
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 7
tooltip_font_color = #ff0000 100
tooltip_font = Roboto-Thin normal 9.0
# Mouse
mouse_middle = none
mouse_right = toggle
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 1
battery_hide = never
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 80
battery_padding = 5 0
battery_background_id = 5
# End of config
Last edited by jolejo07 (2013-07-05 01:39:25)I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)
Maybe you are looking for
-
Hi, I am getting an error "Express Document 'Update Was Terminated' Received from Author" when i am adding the settlement receiver. New settlement receiver is from period 03.2015. changed the ref object(functional location) and the tried to add the s
-
I have 2 problems: 1. The latest version of iTunes comes back with an error message "does not work with 64 bit OS" ! 2. I try to sync my nano and the USB connection is lost... Any ideas would be appreciated - I had no problems when I was using XP 32
-
Help on Palm replicating with 9i Lite
Please help!! I've been strugling with Oracle Lite and palm for over 3 weeks with little success. My actual status: - Oracle 8i as database server on Windows NT - Oracle 9iLite 5.0 server on a Windows 2000 machine - Palm OS 3.5 with Emulator - I'm us
-
Query Reporting: Custom date format
Hi experts, I'm looking for a solution of the following topic: Is it possible to display 0Calday (in general type date) as "Monday, 31.12.2007" instead of "31.12.2007" in a query? Which are the steps to do so? Thanks in advance, Marco
-
Hi, I have a VI Developed in LabVIEW 8.6. It has an Excel Application activeX control and Indicator in the VI. It is working fine with Excel 2003 and Excel 2010. I masscompiled the VI to LabVIEW 2010 and used the same VI. It is throwing Error as Clas