EAP-TTLS wireless setup

I'm not very familiar with the different types of wireless security out there. I'm going back to school next week and need to setup my laptop for the school's wireless. I'm currently using networkmanager (which I'm loving btw). The requirements for the schools wireless are:
SSID (aka, Network Name):    psu *note that the SSID is case sensitive and must be all lower case
Network Type:    Infrastructure
Security:    WPA2-Enterprise (not WPA2-PSK)
Encryption:    AES
Authentication Type:    EAP-TTLS
Authentication Protocol:    PAP
Certificate Authority:    Thawte Premium Server CA
Authentication Server:    radius1.aset.psu.edu
If allowed by your client program, it is also recommended that you enable options to Validate Server Certificate and Verify Server Name.
When I go to setup a new connection, the only authentication options i have are TLS, LEAP, Tunneled TLS, and Protected EAP(PEAP). Is there another package I need to install for EAP-TTLS?

I don't know much about wireless, but the EAP page at wikipedia would lead me to believe that Tunneled TLS (= TTLS) is the one you want. There doesn't seem to be such a thing as 'standalone TTLS' if you get my meaning; searching wikipedia for TTLS just redirects to the EAP page.

Similar Messages

EAP-TTLS with GTC (Generic Token Card)

Greetings iPad Forum,
Our corporate wireless is currently setup to use EAP-TTLS with EAP-GTC (Generic Token Card) for inner identity. In other words, once a connection to the AP is initiated from a PC or Mac, the user is prompted for their RSA SecurID Passcode. No such luck on the iPad - it thinks that the AP is using TLS and wants a Certificate instead of a Token.
As a next step, I started playing with the iPhone Configuration Utility. It is possible to manually specify that the AP is using EAP-TTLS, but I see that EAP-GTC is not an inner identity option - only the *AP methods (PAP, CHAP, etc.).
Has anyone successfully connected to a Wifi network requiring EAP-GTC? I know that Tokens are supported for VPN, but not Wifi?

Keep playing with the iPCU. EAP-GTC with one-time password needs to be configured using a mobile configuration containing the WiFi payload. If configured on-device, iOS will continue to use the cached password causing account lockout.
For (a little) more information see: http://www.enterpriseios.com/wiki/Enterprise_Integration

Connecting myRIO to WiFi with WPA2 Enterprise EAP-TTLS

Hey guys,
I´m struggling to connect my myRIO to the eduroam wifi on campus. It worked for a time, but now it suddenly just doesn´t.
The network runs a EAP-TTLS (or PEAP) Authentification, MSCHAPv2 as an inner authentification and a GT UserTrust Global Root certificate. When I first got it working I just set it up in MAX and uploaded the certificate, when that now stopped working I´ve tried just about everything including editing the wpa_supplicant locally on the myRIO.
To put it short I´m stumped at this, and the fact that it worked for a while doesn´t help O.o
Cheers,
Bjørn

Hi bjornsol,
I managed to connect a wireless cDAQ to eduroam by
Uploading the certificate in MAX
Entering the user name and network secret for PEAP, IP adress set to "DHCP or Link Local"
I can also confirm successfully accessing the device from a eduroam connected computer. Remember to configure a password for your device, it will otherwise be accessible to other eduroam users.
Ask the IT department at your university for a valid certificate. I downloaded this certificate from the KTH eduroam web page, not sure it will work for you if you are registered at another university.
If this doesn't work for you, please upload a screenshot from MAX when trying to connect to the network.
Best regards,
Robert P-F
Applications Engineer
National Instruments Sweden

EAP-TTLS over WLC4402

Hi,
I try to use EAP-TTLS on one of my wireless networks and the 802.1x authentification fails at this moment:
*Dot1x_NW_MsgTask_0: Apr 19 16:04:52.800: 00:16:cb:66:29:bc Processing Access-Accept for mobile 00:16:cb:06:09:bc
*Dot1x_NW_MsgTask_0: Apr 19 16:04:52.801: %APF-6-RADIUS_OVERRIDE_DISABLED: apf_ms_radius_override.c:204 Radius overrides disabled, ignoring source 2
*Dot1x_NW_MsgTask_0: Apr 19 16:04:52.801: 00:16:cb:66:29:bc Resetting web acl from 255 to 255
*Dot1x_NW_MsgTask_0: Apr 19 16:04:52.802: 00:16:cb:66:29:bc apfMsDeleteByMscb Scheduling mobile for deletion with deleteReason 20, reasonCode 2
Do you have any idea where I can find what are deleteReason 20 and reasonCode 2?
Thanks.

can you increase the EAP timers and try
(Cisco Controller) >config advanced eap ?
eapol-key-timeout Configures EAPOL-Key Timeout in milliseconds.
eapol-key-retries Configures EAPOL-Key Max Retries.
identity-request-timeout Configures EAP-Identity-Request Timeout in seconds.
identity-request-retries Configures EAP-Identity-Request Max Retries.
key-index Configure the key index used for dynamic WEP (802.1x) unicast key (PTK).
max-login-ignore-identity-response Configure to ignore the same username count reaching max in the EAP identity response
request-timeout Configures EAP-Request Timeout in seconds.
request-retries Configures EAP-Request Max Retries.
(Cisco Controller) >config advanced eap

Connecting EAP-TTLS-PAP network on 5800

I am studying at RMIT University and we have both eduroam as well as the university's own WPA network. I was trying to connect to it (V50) and was unable to connect. I was using the help of this guide http://sites.google.com/site/pramudi/connecting-to-eduroam-on-nokia-5800-symbian-s60v5 before I found out that RMIT uses 802.11x security mode with PAP encryption. Can anyone help me? Here's a link to their setup guide for Linux: http://mams.rmit.edu.au/ua7mgpk79jzez.pdf
I set it up and then it says TTLS authentication failed.

I've just made Eduroam work on my N95 in Oxford University thus (I'm on firmware 11.0.026 date 17-04-07):
1. Make sure the root certificate for the authority that signed your radius servers' certificate is in the root store of your phone. Oxford uses Globalsign which is not there by standard.
2. Choose WPA/WPA2 for the WLAN Security Mode
3. Choose EAP as the WPA/WPA2 type
4. Choose WPA2 only mode and make sure it is off
5. In the EAP plug-in settings enable only EAP-TTLS and choose that. Set the Authority Certificate to match the one that signed your radius server's certificate.
6. Set your username and realm both to be user-defined and put them in the right boxes (my realm is ox.ac.uk).
7. Use the right of the centre button to move on the EAPs tab and enable "EAP-MSCHAPv2" ONLY. DO NOT ENABLE "MSCHAPv2".
8. In the settings for EAP-MSCHAPv2 provide your username (and password if you wish, or set it to prompt for it).
As we say in England, Robert is then your parent's brother.
You should now be able to use that network connection for web browsing, email, SIP and anything else you might choose.

PSC 2510 - Wireless setup - "Error while saving the settings to the device."

While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
PSC 2510
Windows Vista
Using latest sfotware from HP to install
Thanks
Dennis
This question was solved.
View Solution.

ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
Thanks

WiFi Wireless Setup Wizard produces Blue Screen of Death on Officejet Pro 8600 Plus

The wireless setup wizard on my Officejet Pro 8600 Plus is failing immediately after "scanning for networks". I get a blue screen of death with error message B8494B00, followed by "turn printer on and off" with flashing screen.
I bought the printer about one month ago and it has worked perfectly so far. My Apple Time Capsule failed yesterday, so I bought a new one (latest model) and had to set up the wireless network again. When I tried to do so on the printer, I got the error for the first time. Nothing else had changed. Other devices are working with no problems on the new network. The computer is an Apple iMac running OS Mountain Lion.
I have tried turning the printer on and off, disconnecting the power and reconnecting, then turning it on again, but no result. I have restored the wireless to factory settings, but no difference.
Please help.

Right off I have to tell you I do not "speak Mac".
I assume the "Apple Time Capsule" is a name for a network router? A syncing device?
Unless I am mistaken:
You do not need the Wizard to set up the network -- it is pretty software for an HP PC; when it works, it can make things easier. The setup Wizard is not necessary for the process. I should think this is true for the Mac.
=====================================================================================
If you cannot get someone from the Printing group to answer your specific concern,
you may have succes with the following:
The User Guide has pretty good detail on how to set up the networking necessary to get the printer connected to either a PC or Mac environment. Assuming you can get the printer to "Reset network settings" (User Guide, page 222), then you can re-enter the information you require manually. It is a bit tedious, but is may work better than fighting the Wizard.
OfficeJet Pro 8600 User Guide
You may be able to circumvent sone or all of this by reinstalling the Full Feature Software for your printer -- that assumes you are first able to "reset network settings", at least, and get a printout test page to verify that the reset actually worked.
Select your printer from HP Office Jet 8600 series
Mac – By Garland_M
HP Wireless Printer Setup (Tutorial Video)
Mac
YouTube Search - HP printer install for mac
Good Luck!
<<< Click on the White Kudos Star on the Left to say Thanks!
Clicking “Accept as Solution" helps others find this fix for a same or similar issue >>>
2013 Year of the Snake!
Kind Regards,
Dragon-Fur

Wireless setup

I have a laserjet 100 color mfp m175nw. My computer is a lenovo T430s running Windows 7. I've been using the printer/scanner as a wireless. I replaced my modem and now need to setup the wireless again. These directions from the hp website say to use the printer's control panel, and go to Setup (did that), Network menu (did that), and then the Wireless Setup Wizard is suppoesd to display a list of wireless networks in the area.
http://www.hp.com/global/us/en/wireless/printer-setup-help.html
I haven't been able to find the list of wireless networks.

Hi,
Run the printer installation CD, download its latest software from the HP site or go to My Computer and launch its installation thorugh the listed HP Smart Install drive.
Select Wireless connection and follow the steos on screen to reconfigure the wireless connection for your new router.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Deskjet 3054A Wireless setup without access to router.

Hey everyone,
I own an HP Deskjet 3054A, and I would like to be able to print wirelessly. When I go through the wireless setup, it tells me to either: 1) enter a PIN on the wireless router or 2) Use WPS (Wireless protected setup). The problem is that I don't have access to my building's router (I'm a student, afterall).
I know some HP printers have a feature where you can plug it into your computer via USB, and have it set it up for wireless; mine does not seem to have that, as when I open up the HPLIP (HP printing software for Linux--- yes, I do use Linux), and add the device, and select "Wireless/802.11 (requires a temporary USB connection and is only available for select devices)", and connect the computer to the printer, and click "Next", but it says "No wireless capable devices found". I assume that this is because the printer is not one of the aformentioned "select devices". Is there anyway of enabling this feature? I'm not afraid of loading custom firmware or writing some C code if neccessary I'm a nerd afterall!
I'm using Ubuntu 12.10.
Thanks,
Jordan

OK, this model does support an ad-hoc style wifi connection, however only for the first hour after its first power on sequence (or a reset of the network settings).
So, sorry, I think you are stuck with a USB connection.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart 5520 Wireless Setup Wizard Hangs, USB fails to install

Hello,
I bought a HP Photosmart 5520 4 weeks ago. I installed it and setup a wireless connection. It worked for 1 week without flaws.
After a holiday my HP PS5520 printer lost its wireless connection to the network. I restarted the printer, still no wireless connection. all other devices like iPhones work OK on the wireless network. Tried to run the Wireless Setup Wizard again but the routine hangs (the spinner stops) when searching for routers and no networks are displayed, it hangs. Only a powercord detach can/will hard-restart the printer. After starting the printer, the printer complains that I should us the power butten, but that does not work when it hangs at the wireless setup wizard.
I tried this routine several times, but the printer hangs every time when searching for routers... Tried manual, reset factory defaults, reset network defaults etc... Wireless is simply impossible to use since it can not be setup.
So I tried to use the USB port directly attached to my PC. Since the wireless driver was installed, I connected the printer to the PC with USB but then it was marked as a unrecognised device by Windows 7. I tried to add the HP driver manually but when selecting the CD (inf), Windows tells me that the service stoppen (-10)...
So I installed the software from the CD which pointed me to the online version of the software which I installed. After selecting the USB radiobutton, it tells me to connect the HP PS 5520 which I did, but the HP install window failes to detect that the printer is plugged into the USB port and the printer is installed by Windows as an unknown device.
I uninstalled the 'unknown device' and tried again, wthout luck. Tried another USB port, Windows installed it again as an unknown device and the HP software failes to pick it up. So after googling I deleted all HP software from my computer (Intel I7 - 8 GB), uninstalled the unknown USB device from windows, rebooted several times, deleted all HP folders and cleaned all temp-folders (I am an IT professional!).
So, I installed the software again but when the HPO software asks me to attach the USB cable, Windows again installed the 5520 as an unbknown device and the HP software again failes to see that the printer is attached to the PC.
Tomorrow I will buy a new printer but since this HP 5520 is only 4 weeks old, I really want to knwo how I can fix
1 The issue that the HP printer hangs when searching for routers / wireless networks
2 Windows/HP software to find the HP 5520 through USB
I guess nobody will have an answer since Google does not give any help. This post is merely to expose my frustration that HP makes fine printers but failes to deliver issue-free software... I always have issues when setting up HP printers somehow...
Of coarse I hope that somebody has a clue..... Good night!
Regards
Marc Verkade
Curacao

I have had my 5520 for a couple of years, when intermittently it has dropped off the wireless network, and I have had to reinstall the network. Now it does it every time I switch it on - it has lost the network and password. This is very irritating...

HP P1102w printer will not wake up after sleep (wireless setup, win8)

Bought this printer a month ago. I have no problem with both LAN +Wireless setup.
Windows8 OS
I noticed once the printer is not on (goes to sleep), it will not wake up by itself.
According to manual, if I send a print job, it should wake up by itself.
Currently, this is what I need to do.
I need to physically turn off and turn on the printer, wait for 10-15 seconds until the wifi blue light is solid (no blinking)
and then send my print job, and it will work
Just wondering whether HP has a solution to this, thanks
This question was solved.
View Solution.

Is HP ever going to fix / address this issue?
People Running the latest firmware - 20130703
And there is no option to disable Sleep mode. The max you can set it to is 1 hour.
The power physically / manually has to be powered back on, to establish IP connectivity.
This has been an issue for 2 years now!!! Come on what does it take to get an update?
Seriously?

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

C4580 problem Wireless setup (Mac)

Hello,
I have a C4580 and a macbook air (10.9)
When I connect the printer with USB works. But when I try to connect via Wireless doesnt work or show.
Since Maveriks install the printer as soon as I connected doesnt show any wireless setup.
I printed the Wireless Network Test Report and it is not connected to the Network (Network status offline).
The UI of the printer doesn't show any way of connecting the printer to the router... it only shows for printing network tests, configuration page and restore network defaults.
The wireless blue led its on, and in the diagnostics summary shows PASS in Wireless on, Wireless Working.
I additionally tried with the HP Utility - HP auto Wireless connect, but doesnt show the printer.
Also, I tryied connecting to hpsetup but gives me a selfassigned IP and this doesn't let me go further in the HP Easy Wireless Setup
Help!

Hi Tewers_244
Since we can not run the Setup Assistant, there is no wireless wizard on the printer or in the Embedded Web Server, you will need to setup the wireless a different way. Please complete the following steps and let me know the outcome;
To restore network defaults
1. Press the Wireless button on the product.
2. Press the button next to the down arrow on the display until Restore Network
Defaults is highlighted, and then press OK.
3. Confirm that you want to restore the network defaults
To turn the wireless radio on
1. Press the Wireless button on the product.
2. Press the button next to the down arrow on the display until Turn Radio On or Turn
Radio Off is highlighted, and then press OK.
3. Make sure the radio is on
Put the computer on the printers network (temporary)
1. Click on the Airport symbol on the top left side of the Mac screen
2. Choose the network that look relative to the printer (might say HP setup or some variation of your printer name)
3. Wait a couple of minutes to allow the computer and printer to communicate with one another
Print the wireless network test
Press the Scan button (it also the Wireless menu button)
Select Wireless Settings
Navigate to Wireless test and select.
The Wireless Network Test prints, look for and note the IP address.
Open an Internet browser (Safari) and enter the IP address into the URL (address bar).
If you require further assistance let me know. If this does not resolve the issue, you might consider upgrading to a model that has full feature software and drivers that is compatible with 10.9. I generally like the models that have the wireless wizard built into the printer control panel too. I hope this information is helpful.
stevesept14 wrote:
Thank you very much .
For anyone else with this problem, this really works.
Faith in HP restored
Steve
- Source
I hope this helps for you too. If you have any additional questions or if this does not work, please post back to let me know. If this does resolve the issue, please let me know by marking this post as "Accept as Solution". Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Wireless Setup Assistant Not Working

I am not able to figure out out to 1) add a client using pin. Which computer generates the pin? The the host or the client? and 2) I am not able to a Windows client. The windows computer will connect the APE, but the APE will not capture the MAC address and add it.
Is there some step that I am missing?

I, too, am having some difficulty in getting the Wireless Setup Assistant to connect an iPaq 2495b to the network. I just get the spinning icon with no apparent action happening.
Any thoughts?

802.1x RADIUS with EAP-TLS/EAP-TTLS & Dynamic VLAN Assignment

Hello, My team is looking for switches supporting 802.1x authentication on either EAP-TTLS or EAP-TLS protocols with dynamic vlan assignment enabled for these. Looking at the data sheets of the Linksys desktop switches, I found only SLM224G4PS and SLM224G4S models to support EAP-TLS or EAP-TTLS. Am I right? Do they support Dynamic VLAN Assigment for either of those protocols? This is not explicitly mentioned in the data sheets, and I happen to find switches from other manufacturers that announce to support EAP-TLS/EAP-TTLS but no dynamic vlan assignment. Thank you for any help.

SLM switches do support 802.1x RADIUS with EAP-TLS/EAP-TTLS unlike the SRW switches which support MD5. But I don't think that they support Dynamic VLAN.

EAP-TTLS wireless setup

Similar Messages

Maybe you are looking for