EAP type not configured

hi
i have an ACS 1113 ....
i have installed and configured the certificate... and trusted the CA certificate... also i configured the global authentication (enable the PEAP ,EAP-TLS)
no when i try to authenticate (by the wireless) i get failed to authenticate
when checking the ACS failed attempts i find the failure code
- EAP type not configured-
i don?t know why its happing....
but every thing is configured...

Please make sure on ACS > Network Access Profiles >
Make sure we have "Grant access using global configuration,when no profile matches" option
selected.
Also make sure on ACS > ACS Certificate Setup > Install ACS Certificate >
Make sure a certificate is installed, if it is installed then click cancel.
Also go to ACS > System Configuration > Global Authentication Setup > Make sure under "PEAP" we have checked "Allow EAP-MSCHAPv2" and/or "Allow EAP-GTC" as applicable.
Regards,
~JG

Similar Messages

  • 802.1x EAP type not configured

    Hi, a simple 802.1x test with XP client sp2, 3560 with IOS 12.2(35)SE5 and ACS 4.1(1) build 23.
    EAP MD5 selected on the client and enabled on the ACS but I receive in ACS an authentication failure message, with Authen-Failure-Code "EAP type not configured".
    Any idea ?
    thank you in advance
    greatings

    You have to install a self-generated certificate on the ACS, and enabled PEAP with "Allow EAP-MSCHAPv2". then changed the setting on our PC, and manage to make it work.
    Could you do the following,
    1.) Enable full detail logging on the ACS: System Configuration -> Service
    Control -> Logging detail level = "FULL". Then restart the ACS services.
    2.) Enable "debug radius" together with the debugs that you already have
    on the switch
    3.) If there is a sniffer (Norton SnifferPro, or the freeware Wireshark or
    Ethereal) on the client laptop, please start it and enable sniffing on the
    client interface.
    4.) Make another authentication attempt.
    5.) Generate a "package.cab" on the ACS, by running Bin\CSSupport.exe
    underneath the ACS installation directory
    6.) Please send me the following information,
    a) The package.cab file,
    b) the debug output from the switch,
    c) the sniffer trace (if available).

  • The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server

    wireless authentication not working 
    I found the following in the radius
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          1/15/2014 2:07:57 AM
    Event ID:      6273
    Task Category: Network Policy Server
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:     NAP01.test.local
    Description:
    Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    User:
     Security ID:   doamin \user.a
     Account Name:   user.a
    Client Machine:
     Security ID:   NULL SID
     Account Name:   -
     Fully Qualified Account Name: -
     OS-Version:   -
     Called Station Identifier:  00-0F-7D-C4-45-20:staff
     Calling Station Identifier:  0C-74-C2-EF-Dd-0B
    NAS:
     NAS IPv4 Address:  192.168.9.10
     NAS IPv6 Address:  -
     NAS Identifier:   -
     NAS Port-Type:   Wireless - IEEE 802.11
     NAS Port:   497
    RADIUS Client:
     Client Friendly Name:  wcont1
     Client IP Address:   192.168.9.10
    Authentication Details:
     Connection Request Policy Name: Wireless
     Network Policy Name:  wism
     Authentication Provider:  Windows
     Authentication Server:  NAP01.test.local
     Authentication Type:  EAP
     EAP Type:   -
     Account Session Identifier:  -
     Logging Results:   Accounting information was written to the local log file.
     Reason Code:   22
     Reason:    The client could not be authenticated  because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.
    Please help

    Hi,
    Anything updates?
    In addition, this issue may also because your client didn't have CA certificate of your domain. Please make sure that your client has CA certificate.
    Besides, the error "The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server" may be due to that the default maximum transmission unit that NPS uses for EAP payloads is 1500
    bytes. You can lower the maximum size that NPS uses for EAP payloads by adjusting the Framed-MTU attribute in a network policy to a value no greater than 1344:
    Configure the EAP Payload Size
    Best regards,
    Susie

  • IDoc output type not getting configured in IDoc-File scenario

    Hello
    I am having IDoc to file scenario where I want to post Delivery Document to legacy system. For this I have configured following EDI configuration for Delivery through NACE transaction
    1] Created output type
    2] Created partner function as EDI LS for this output type
    3] Configured RSNASTED as Processing Routines for output type
    4] Included this output type in the Header output procedure
    5] Configured XI system as the partner in partner profile with appropriate Message control
    Still when I attempt to include this output type in the Delivery it gives me "Output for partner could not be configured". The detail message says "In Customizing, the 'CannotBeChanged' indicator has been set for output type".
    I checked in SPRO but could not find such flag.
    Does anyone had came across such output type configuration.
    Thanks in advance.
    I know this question might be not appropriate in XI forum as it comes under EDI but it has become necessary for XI profs -:)
    Regards
    Rajeev

    Hi,
    Please check the following
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    Copy NEU to ZNEU or YNEU
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
    G.Ganesh Kumar

  • The interface type is valid, but the specified interface number is not configured

    Hi
    I'm all new to using LabVIEW, which I have to use for a project. I'm trying to make a setup with a Keithley 2000 multimeter and an Agilent U2722A SMU. But I can't figure out how to get these instruments to communicate with LabVIEW. I can see and send commands to the Keithley 2000, but not the Agilent U2722A, with Agilent Connection Expert. But when I use LabVIEW I can't see any of them, and if I use the drivers I've found with "NI Instrument Driver Finder - Configure Search" I pops up with an error message saying
    "Error -1073807195 occurred at VISA Open in Keithley 2000.lvlib:Initialize.vi->Keithley 2000 Read Multiple.vi?            
    Possible reason(s):
    VISA:  (Hex 0xBFFF00A5) The interface type is valid, but the specified interface number is not configured.?"
    I've read all the threads I could find about this problem, but none of them helped. I've checked that the NiVi488.dll is checked in MAX under the VISA options. When I open the VISA Interactive Control I see an ASRL1>>ASRL1::INSTR and ASRL10>>ASRL10::INSTR. I don't know why it says ASRL, when I'm using an USB/GPIB interface, but the Keithley 2000 have 10 as the address. (the Agilent U2722A is connected directly by USB)
    Assume I know nothing.
    Thanks

    I'm using the GPIB-USB-HS. I also used this on the development PC when I exported the hardware configuration.
    This shows up in my MAX config and when I scan instruments, all of them show up. I can query them in MAX no problem.
    My installer includes all the .exe's from my project. As I said, I've done this with my previous 2009 installer without any issue. I upgraded my installer since I upgraded my project for version 2013. The error only happens when I run my code.
     

  • Which EAP Type to choose for 802.1x Wireless Policy?

    Hi everyone,
    i have a question about recommendation for EAP Type in a wireless policy:
    Which configuration is more secure/recommendet?
    a)
    Authentication Type: PEAP
    EAP Type: EAP-MSCHAP v2
    b)
    Authentication Type: EAP
    EAP Type: Certificate
    We have a working configuration with a) and could Change to b).
    Thanks,
    Andy

    Hi,
    Project a uses PEAP cooperate with EAP(EAP-MSCHAP v2) is more security/recommended.
    PEAP is a new member of the family of EAP protocols. To enhance both the EAP protocols and network security, PEAP provides:
    1. Protection for the EAP method negotiation that occurs between client and server through a TLS channel. This helps prevent an attacker from injecting packets between the client and the network access server (NAS) to cause the negotiation of a less secure
    EAP method. The encrypted TLS channel also helps prevent denial of service attacks against the IAS server.
    2. Support for the fragmentation and reassembly of messages, allowing the use of EAP types that do not provide this.
    3. Wireless clients with the ability to authenticate the IAS or RADIUS server. Because the server also authenticates the client, mutual authentication occurs.
    4. Protection against the deployment of an unauthorized wireless access point (WAP) when the EAP client authenticates the certificate provided by the IAS server. In addition, the TLS master secret created by the PEAP authenticator and client is not shared
    with the access point. Because of this, the access point cannot decrypt the messages protected by PEAP.
    5. PEAP fast reconnect, which reduces the delay in time between an authentication request by a client and the response by the IAS or RADIUS server, and allows wireless clients to move between access points without repeated requests for authentication.
    This reduces resource requirements for both client and server.
    You can choose between two EAP types for use with PEAP: EAP-MS-CHAPv2 or EAP-TLS. EAP-MS-CHAPv2 uses credentials (user name and password) for user authentication. EAP-TLS uses either certificates installed in the client computer certificate store or a smart
    card for user and client computer authentication. Comparatively, the second one is more security because public Key certificates provide a much stronger authentication method than those that use password-based credentials.
    Best Regards,           
    Eve Wang 

  • 802.1x PEAPV1 (EAP-GTC) not working on Ipad/Iphone

    I am currently working on deploying 802.1x at a remote location for a University. We use Cisco WCS to query a LDAP server. Apparently the Iphones and Ipads are unable to connect using 802.1x PEAP. We have both PEAPv0(EAP-MSCHAPv2) and PEAPv1(EAP-GTC) turned on but our LDAP server only supports EAP-GTC. Does anyone know which PEAP version the Ipad/Iphone supports??  I have included output from the Iphone Configuration Utility while I tried to connect.
    Fri Sep  2 10:54:50 ********** eapolclient[150] <Notice>: peap_verify_server: server certificate not trusted, status 3 0
    Fri Sep  2 10:54:50 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:] event: 3
    Fri Sep  2 10:54:50 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: User Information required
    Fri Sep  2 10:54:55 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:] event: 1
    Fri Sep  2 10:54:55 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: EAPOL failure
    THANK YOU!!!

    I am having the same issue..
    Whenever i am trying to connect my iphone to a WPA2-Enterprise network, it by defaults connects through the MSCHAPv2 Auth protocol, whereas my LDAP supports only GTC auth protocol.
    But there is no option to change the encryption type when configuring a WiFi.
    Requesting to please update as to how connect to the WiFi.
    Thanks in Advance.

  • "Storage is not configured" during failover - COH-1467 still not fixed?

    I am runing a test program using two cache nodes and one "client JVM", all on the same machine (the first cache node is used as WKA). When I kill one of the cache nodes and the restart it again I get the following exceptions:
    In the surviving cache node:
    2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1): An exception (java.lang.ClassCastException) occurred reading Message AggregateFilterRequest Type=31 for Service=DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
    2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1): Terminating DistributedCache due to unhandled exception: java.lang.ClassCastException
    2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1):
    java.lang.ClassCastException: java.lang.Long
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$AggregateFilterRequest.read(DistributedCache.CDB:8)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:117)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
         at java.lang.Thread.run(Thread.java:619)
    On the restarted cache node:
    2009-01-22 08:01:15.722/2.220 Oracle Coherence GE 3.4.1/407 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from resource "file:/C:/Javaproj/Query/lib/master-coherence-cache-config.xml"
    2009-01-22 08:01:16.565/3.063 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
    2009-01-22 08:01:16.628/3.126 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=31
    2009-01-22 08:01:16.628/3.126 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): Increasing allowable variance to 17
    2009-01-22 08:01:17.003/3.501 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster with senior Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1)
    2009-01-22 08:01:17.065/3.563 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544) joined Cluster with senior member 1
    2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1
    2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service InvocationService with senior member 1
    2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCacheNoBackup with senior member 1
    2009-01-22 08:01:17.097/3.595 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 4 joined Service InvocationService with senior member 1
    2009-01-22 08:01:17.097/3.595 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 4 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:17.222/3.720 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): TcpRing: connecting to member 4 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/138.106.109.121,port=8088,localport=3609]}
    2009-01-22 08:01:17.253/3.751 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:Management, member=5): Service Management joined the cluster with senior service member 1
    2009-01-22 08:01:17.393/3.891 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=5): Service InvocationService joined the cluster with senior service member 1
    2009-01-22 08:01:18.643/5.141 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:19.050/5.548 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:23.659/10.157 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:24.284/10.782 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:28.674/15.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:29.503/16.001 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:33.674/20.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:33.721/20.219 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:38.674/25.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:38.956/25.454 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:43.690/30.188 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:44.174/30.672 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <Error> (thread=Main Thread, member=5): Error while starting service "InvocationService": com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=2, Name=InvocationService, Type=Invocation
    MemberSet=ServiceMemberSet(
    OldestMember=Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    ActualMemberSet=MemberSet(Size=3, BitSetCount=2
    Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544)
    Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728)
    MemberId/ServiceVersion/ServiceJoined/ServiceLeaving
    1/3.1/Thu Jan 22 07:59:27 CET 2009/false,
    4/3.1/Thu Jan 22 08:00:36 CET 2009/false,
    5/3.1/Thu Jan 22 08:01:17 CET 2009/false
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:27)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
         at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:28)
         at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
         at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
         at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:841)
         at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:140)
         at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:61)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
    Exception in thread "Main Thread" com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=2, Name=InvocationService, Type=Invocation
    MemberSet=ServiceMemberSet(
    OldestMember=Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    ActualMemberSet=MemberSet(Size=3, BitSetCount=2
    Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544)
    Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728)
    MemberId/ServiceVersion/ServiceJoined/ServiceLeaving
    1/3.1/Thu Jan 22 07:59:27 CET 2009/false,
    4/3.1/Thu Jan 22 08:00:36 CET 2009/false,
    5/3.1/Thu Jan 22 08:01:17 CET 2009/false
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:27)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
         at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:28)
         at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
         at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
         at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:841)
         at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:140)
         at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:61)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <Error> (thread=Invocation:InvocationService, member=5): validatePolls: This service timed-out due to unanswered handshake request. Manual intervention is required to stop the members that have not responded to this Poll
    PollId=1, active
    InitTimeMillis=1232607677393
    Service=InvocationService (2)
    RespondedMemberSet=[1]
    LeftMemberSet=[]
    RemainingMemberSet=[4]
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=5): Service InvocationService left the cluster
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <D4> (thread=ShutdownHook, member=5): ShutdownHook: stopping cluster node
    Process finished with exit code 1
    On the client JVM:
    2009-01-22 08:01:14.815/41.265 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=4): Repeating AggregateFilterRequest due to the re-distribution of PartitionSet[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
    java.lang.RuntimeException: Storage is not configured
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureRequestTarget(DistributedCache.CDB:33)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendPartitionedRequest(DistributedCache.CDB:31)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.aggregate(DistributedCache.CDB:11)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.aggregate(DistributedCache.CDB:52)
         at com.tangosol.coherence.component.util.SafeNamedCache.aggregate(SafeNamedCache.CDB:1)
         at com.tangosol.net.cache.NearCache.aggregate(NearCache.java:453)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.typeSearch(ValueQueryInvocable.java:260)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringFirstSearch(ValueQueryInvocable.java:300)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.run(ValueQueryInvocable.java:135)
         at com.scania.oas.coherence.invocables.InvocableWrapper.run(InvocableWrapper.java:54)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.onInvocationRequest(InvocationService.CDB:10)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.onReceived(InvocationService.CDB:40)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:130)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
         at java.lang.Thread.run(Thread.java:619)
    java.lang.RuntimeException: Storage is not configured
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureRequestTarget(DistributedCache.CDB:33)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendPartitionedRequest(DistributedCache.CDB:31)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.aggregate(DistributedCache.CDB:11)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.aggregate(DistributedCache.CDB:52)
         at com.tangosol.coherence.component.util.SafeNamedCache.aggregate(SafeNamedCache.CDB:1)
         at com.tangosol.net.cache.NearCache.aggregate(NearCache.java:453)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringSearch(ValueQueryInvocable.java:268)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringFirstSearch(ValueQueryInvocable.java:297)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.run(ValueQueryInvocable.java:135)
         at com.scania.oas.coherence.invocables.InvocableWrapper.run(InvocableWrapper.java:54)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.onInvocationRequest(InvocationService.CDB:10)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.onReceived(InvocationService.CDB:40)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:130)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
         at java.lang.Thread.run(Thread.java:619)
    I even tried to re-write the "run method" in tthe invocable in a way that caused it to, in a loop, perform a delay and then re-try its calculations when it received a runtime exception with the text "Storage is not configured" causing the retreival a new named cache each time but this did not help - it never seemed to recover...
    Since I dont see any of my application classes in the "class cast" trace-back I assume it is an Coherence internal problem or can you thiink about some user programming error that could cause it? I am by the way not using any long or "Long in my application...
    Best Regards
    Magnus

    Hi Magnus,
    The log you provided seems to indicate that the problem was caused by the de-serialization of the “AggregateFilterRequest” message. The only explanation we have is that you are using a custom Filter that has asymmetrical serialization/deserialization routines, causing this failure. Could you please send us the corresponding client code?
    Meanwhile, we will open a JIRA issue, to make sure that Coherence handles this kind of error more gracefully.
    -David

  • Doesn't play songs, "itunes is not configured for use with mac-formatted"??

    Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
    The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
    Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
    Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
    Thanks for any thoughts!

    Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
    I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
    If there is anyone out there that can help please do!
      Windows XP  

  • PO document type not transferring to Customs management

    Hi,
    We have configured PO document type in GTS for Import and it got transfer to Complaince not to customs.  I have created CULOIM document type and item category on customs.  when i checked on this table /SAPSLL/V_TLEYVS i couldn't find CULOIM document type..  When i try to create a new one it say CULOIM document type already exist...
    I do not know why it is saying like that even document type not there in that table and where would i find that.
    One more question:
    When we assign document type to logical system on Customs we can see GTS document type field... when you press F4 you can see CD Cat - A... Can you tell me what is that and where do you define and assign to custom document type.
    regards
    rc gopi

    You can maintain the table by going into the SPRO and defining the doc tyoe you looking for , Onc eyou maintain there it reflects in in this table as it Configuration table.
    If you want to delete , add any entry directly in table then u can do that by getting in debug mode.
    Select a  entry in table
    Double click on it
    Do /h  to switch on the debugging
    Press Enter
    You will See different Case for "Code"
    Type the filed name Code in in "field Name"
    it will display the value 'SHOW'  you can change this value as desire like to Delete 'DELE' , to insert new value 'AVNO' and then click on change pencil.
    and press F8.
    Now you come to the screen where u can do the changes and save it.
    Custom Doc Category is taken automatically by SAP as for Export and Import doc type  in customs it is always A.
    If you cDefine Document Types for Advance Docs for Customs Declaration it is C.
    Each category has got it one chateristics , so if we defining correct documnet type we need not to worry for category as it will by default come as set in SAP.
    Kind Regards,
    Sameer

  • Airport: Not Configured after 10.4.7 update

    I just bought a new macbook 2.0Ghz, proceeded through the first-time installation wizard setup my wifi settings, and everything worked fine.
    At first boot in macosx i had my wifi working and i was able to browse and download things.
    I installed the 10.4.7 macosx update, restarted, then lost my wifi connection.
    The signal indicator reads
    Airport: Not Configured
    and in the network settings under 'Network Port Configuration' I see a greyed out 'AirPort' configuration. I can"t enable it. I can't add a new one either since the only choices are Bluetooth, Builtin firewire/ethernet, 6 to 4
    I found a knowledge base article describing a similar problem:
    http://docs.info.apple.com/article.html?artnum=303437
    But the described workaround doesn't seem to work.
    I also tried to reinstall the 10.4.7 update using the combo installer, the issues remain.
    I ran also the permission repair utility at various stages in the process, it never detected any errors.
    In the System Profiler under network/Airport section, i see:
    Airport Card Information:
    Type: AirPort Extreme [..]
    Locale: Worldwide
    Firwmare: 0.1.24
    Current Wireless Network: AirPort is currently turned off
    I know the card is there and working, since linux happily uses it when i boot in linux.
    Has anyone any clue about what's happening ?
    Is there a simple 'enable' button somewhere, or is that a known isse with 10.4.7 updater, how can i revert to 10.4.6 then ?
    Thanks a lot!
    Macbook   Mac OS X (10.4.7)  

    It's actually a bit more weird:
    When stepping through the first-time boot wizard, it asks to select the wifi essid from a list, the scan is ok and shows my network, and i type the WEP key in the box, click next. The 'Configuring your computer' blinks then the setup goes on and asks for my .Mac account and so on.
    After the wizard completes i'm able to surf the web and connected BUT !
    The signal meter is always empty and clicking on it states 'Airport: Not Configured'. When i open the network preferences it says under 'current status' that i'm using the builtin ethernet device ??!!
    The IP and dhcp re-lease stuff work in the UI even if it's clearly not the builtin ethernet card that i'm using since the IP is from the wifi router, and there is no cable plugged in, and i can access the internet.
    No mention of Airport port in the setup, so i can't configure it.
    As soon as i restart the connection is gone, and the setup created by the first-time wizard is gone.
    So the situation is now i have a 10.4.6 os with no airport..

  • Transacction types not displaying in the popup

    Hi Experts,
    After system upgrade from crm 7.0 to ehp3, transaction types are not displaying upon clicking New button and create follow up buttons. I have checked the spro settings and compared with 7.0 system. There are no changes.
    In the debugging in the  method GET_PROC_TYPE_CUST of class CL_CRM_UIU_BT_GET_PROC_TYPES, i found the entries in the internal table getting deleted as the navigation is not supported. Am having the entries in lt_proc_type_t.
    * Retrive the possible proc types for given bus type
       CALL FUNCTION 'CRM_BSP_SALES_GET_PROC_TYPE'
         EXPORTING
           iv_bus_category     = iv_bus_category
           iv_templates_only   = iv_template_only
           iv_process_mode     = lv_process_mode
           iv_btx_class        = iv_btx_class
           iv_btx_all          = iv_btx_all
         IMPORTING
           et_process_type_txt = lt_proc_type_t.
       LOOP AT lt_proc_type_t INTO ls_proc_type_t.
         IF iv_mixed_quot_order EQ abap_false.
    *** Filter out mixed types
           lv_delete = abap_false.
    *     check item types mixed or not
           cl_crm_uiu_bt_get_proctypes=>is_quotation(
             EXPORTING iv_proc_type         = ls_proc_type_t-process_type
                       iv_bus_category      = iv_bus_category
             IMPORTING ev_quotation_only    = lv_quotation_only
                       ev_mixed_quot_order  = lv_mixed_quot_order ).
           IF lv_mixed_quot_order EQ abap_true AND
              iv_quotation_only EQ abap_true.
    *** Mixed Types for sales + quotation items(Considered as sales order 1299189) -> exclude if quotation_only is true
             lv_delete = abap_true.
           ELSE.
    *** Pure Types
             IF lv_quotation_only EQ abap_true.
               IF iv_quotation_only EQ abap_false.
    *** only pure quotations required
                 lv_delete = abap_true.
               ENDIF.
             ELSE.
               IF iv_quotation_only EQ abap_true.
    *** only pure orders required
                 lv_delete = abap_true.
               ENDIF.
             ENDIF.
           ENDIF.
           IF lv_delete = abap_true.
             DELETE lt_proc_type_t.
             CONTINUE.
           ENDIF.
         ENDIF.
    *   Check whether the naviagtion is supported
         IF cl_crm_uiu_bt_get_proctypes=>is_navigation_supported(
              iv_bus_category = iv_bus_category
              iv_proc_type    = ls_proc_type_t-process_type
              iv_btx_class    = iv_btx_class ) NE abap_true.
           DELETE lt_proc_type_t.
         ENDIF.
       ENDLOOP.
       SORT lt_proc_type_t BY p_description_20 AS TEXT.
       LOOP AT lt_proc_type_t ASSIGNING <proc_type_t>.
         ls_value-key = <proc_type_t>-process_type.
         ls_value-value = <proc_type_t>-p_description_20.
         INSERT ls_value INTO TABLE rt_proc_types.
       ENDLOOP.
    Can anyone please guide me what navigation it is checking for transaction types. Can i find it anywhere in the configuration.
    Thanks & regards,
    Chiru

    Hi Chiru,
    please check below configuration.
    1. go to spro>crm>transactions>basic settings>define transaction types
    2. mark your Z transaction type
    3. in navigation bar on the left side click on Channel
    4. add channel GUI CRM WEBCLIENT UI
    and one more thing check inactive check box should be empty.
    check below link also
    http://scn.sap.com/community/crm/sales/blog/2013/08/23/quotation-transaction-type-not-shown-in-webui
    http://scn.sap.com/thread/1648811
    http://scn.sap.com/thread/2130867
    regards,
    vishwa.

  • Generated Proxy Error: System not configured as XI Integration Engine

    Dear all,
    Using transaction SPROXY I generated a proxy on a Message Interface.
    This generated as well a method and the associated class.
    When I run it, trying to send data through all this, I get the following error:
    <b>System not configured as XI Integration Engine</b>
    Here is the model I got on another thread, in order to catch the error text:
    DATA: l_sys_exception    TYPE REF TO cx_ai_system_fault.
    *...proxy call
    catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
    write: l_sys_exception->errortext.
    Anyone has any idea where this error commes from?
    I am mostly wondering whether the problem comes from my outbound system or XI configuration?
    Thanks a lot, have a nice day!
    Isa.

    check this thread
    https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

  • Error: System not configured as XI Integration Engine

    Hi All,
    I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
    "2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText:   ErrorStack: System not configured as XI Integration Engine
    2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
    what might be the possible errors..
    regards,
    Rajesh

    Hi Rajesh,
    you can go through these chek steps
    1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
    2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and  also perform a delta refresh.
    3)Check whether your business system is tied to the integration server in SLD.
    4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
    hope these checks will solve your problem
    Thanks
    sandeep sharma
    PS:If helpful Plz reward points
    Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

  • Error 633: The modem (or other connecting device) is already in use or is not configured properly.

    Hi all,
    I recently got that a new USB CDMA modem which works fine on Windows 7 system but when I try connecting to my other laptop which runs on Windows 8.1, it keeps giving the error:
    Error 633: The modem (or other connecting device) is already in use or is not configured properly. I've most of the links and solutions shared but none seems to work. I've generated diagnostic logs which are as follows. I interpreted some and most probably
    it seems like an issue of incompatible driver, but does anyone else sees any issues in these diagnostic logs. Looking forward to your suggestions.
    [4724] 06-01 20:01:56:314: ENTRY: Reading "Reliance Netconnect+"
    [4724] 06-01 20:01:56:315:
    Before LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:315: LoadPortsList2
    [4724] 06-01 20:01:56:315: GetRasPorts
    [4724] 06-01 20:01:56:315: RasPortEnum...
    [4724] 06-01 20:01:56:315: RasPortEnum=603,c=10
    [4724] 06-01 20:01:56:315: RasPortEnum...
    [4724] 06-01 20:01:56:315: RasPortEnum=0,c=10
    [4724] 06-01 20:01:56:315: RasGetDevConfig
    [4724] 06-01 20:01:56:316: RasGetDevConfig=603
    [4724] 06-01 20:01:56:316: RasGetDevConfig
    [4724] 06-01 20:01:56:316: RasGetDevConfig=0
    [4724] 06-01 20:01:56:316: SanitizeUnimodemBlob: mdm prot=0
    [4724] 06-01 20:01:56:316: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
    [4724] 06-01 20:01:56:316: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:317: LoadPortsList=0
    [4724] 06-01 20:01:56:317: successfully finished LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:317: Reading media group "serial"
    [4724] 06-01 20:01:56:317: New link format
    [4724] 06-01 20:01:56:317:
    DUPTEST:Port in this media
    [4724] 06-01 20:01:56:317: Port=COM17
    [4724] 06-01 20:01:56:317:
    Trying to match the phonebook port in the system ports
    [4724] 06-01 20:01:56:318: Port configured
    [4724] 06-01 20:01:56:318: SetDefaultModemSettings(bps=921600)=1
    [4724] 06-01 20:01:56:318: Reading device group "modem"
    [4724] 06-01 20:01:56:318: Device List after deleting dupe
    [4724] 06-01 20:01:56:318: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:318: Fix entry type, 0 to 1
    [4724] 06-01 20:01:56:318: Device List after deleting dupe
    [4724] 06-01 20:01:56:318: ReadRasFile: ReadEntryList returned 0
    [4724] 06-01 20:01:56:318: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
    [4724] 06-01 20:01:56:318: ReadPhonebookFile returns 0
    [4724] 06-01 20:01:56:318: RasGetAutodialAddressW
    [4724] 06-01 20:01:56:318: RasGetAutodialAddressW
    [4724] 06-01 20:01:56:318: DwEnumEntryDetails done. 0
    [4724] 06-01 20:01:56:318: RasGetEntryPropertiesW
    [4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:56:318: GetPbkAndEntryName
    [4724] 06-01 20:01:56:318: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
    [4724] 06-01 20:01:56:318: IsPublicPhonebook=0
    [4724] 06-01 20:01:56:318: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:56:318: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:56:318:  IsVirtualizationNeeded: return value = 0
    [4724] 06-01 20:01:56:319: ENTRY: Reading "Reliance Netconnect+"
    [4724] 06-01 20:01:56:319:
    Before LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:319: LoadPortsList2
    [4724] 06-01 20:01:56:319: GetRasPorts
    [4724] 06-01 20:01:56:319: RasPortEnum...
    [4724] 06-01 20:01:56:319: RasPortEnum=603,c=10
    [4724] 06-01 20:01:56:319: RasPortEnum...
    [4724] 06-01 20:01:56:319: RasPortEnum=0,c=10
    [4724] 06-01 20:01:56:319: RasGetDevConfig
    [4724] 06-01 20:01:56:320: RasGetDevConfig=603
    [4724] 06-01 20:01:56:320: RasGetDevConfig
    [4724] 06-01 20:01:56:320: RasGetDevConfig=0
    [4724] 06-01 20:01:56:320: SanitizeUnimodemBlob: mdm prot=0
    [4724] 06-01 20:01:56:320: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
    [4724] 06-01 20:01:56:320: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:322: LoadPortsList=0
    [4724] 06-01 20:01:56:322: successfully finished LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:322: Reading media group "serial"
    [4724] 06-01 20:01:56:322: New link format
    [4724] 06-01 20:01:56:322:
    DUPTEST:Port in this media
    [4724] 06-01 20:01:56:322: Port=COM17
    [4724] 06-01 20:01:56:322:
    Trying to match the phonebook port in the system ports
    [4724] 06-01 20:01:56:322: Port configured
    [4724] 06-01 20:01:56:322: SetDefaultModemSettings(bps=921600)=1
    [4724] 06-01 20:01:56:322: Reading device group "modem"
    [4724] 06-01 20:01:56:322: Device List after deleting dupe
    [4724] 06-01 20:01:56:322: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:322: Fix entry type, 0 to 1
    [4724] 06-01 20:01:56:322: Device List after deleting dupe
    [4724] 06-01 20:01:56:322: ReadRasFile: ReadEntryList returned 0
    [4724] 06-01 20:01:56:322: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
    [4724] 06-01 20:01:56:322: ReadPhonebookFile returns 0
    [4724] 06-01 20:01:56:322: DuplicatePhoneNode
    [4724] 06-01 20:01:56:322: GetPbkAndEntryName. rc=0x0
    [4724] 06-01 20:01:56:322: GetInstalledProtocolsEx=0xc.
    [4724] 06-01 20:01:57:690: DwEnumEntryDetails
    [4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:690: ReadPhonebookFileEx: called for pbk C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
    [4724] 06-01 20:01:57:690: IsPublicPhonebook=1
    [4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690:  IsVirtualizationNeeded: return value = 1
    [4724] 06-01 20:01:57:690: GetLUAPhonebookPath: Return value 0 hiddenpbk path C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\_hiddenPbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: ReadRasFile: ReadEntryList returned 0
    [4724] 06-01 20:01:57:690: SyncMasterPhonebookFile:++
    [4724] 06-01 20:01:57:690: IsPublicPhonebook=1
    [4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: FindFirstFile failed with 0x2
    [4724] 06-01 20:01:57:690: ReadRasFile: File C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk does not exist
    [4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile ++
    [4724] 06-01 20:01:57:690: WritePhonebookFile
    [4724] 06-01 20:01:57:690: ModifyEntryList: Number of connections written 0
    [4724] 06-01 20:01:57:690: RASSQM: In WritePhonebookFile Number of alluser profiles set 0
    [4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile : WritePhonebookFile failed with 0
    [4724] 06-01 20:01:57:690: RASSQM: In ReadPhonebookFile Number of alluser profiles set 0
    [4724] 06-01 20:01:57:690: ReadPhonebookFile returns 0
    [4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:691: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
    [4724] 06-01 20:01:57:691: IsPublicPhonebook=0
    [4724] 06-01 20:01:57:691: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:691: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:691:  IsVirtualizationNeeded: return value = 0

    Hi,
    We could get more information about your problem through this log. While, for your problem, first of all, it would be better to contact USB Modem manufacture to confirm its compatibility with Windows edition.
    After that, make sure its driver was upgraded to be latest.
    Roger Lu
    TechNet Community Support

Maybe you are looking for