EAR file not reflecting the changes after successful deployment

Hi Everyone,
We have a weird situation where we deployed a EAR file in NWDS and changes got reflected in Dev portal and when pushed to QA the changes are not getting reflected.
There must be some archieving issue or unable to overwrite the existing EAR file...
Please help us out this is happening only for one ear file rest are getting deployed properly.. we are using sd

Hi,
There are possibilities that your ear is depending on other referenced application/class. I encounterred like this kind of error. In my situation the dependent/referred project/classes were not deployed correctly.(Correct version is not deployed).
My suggesstion would be in that area,so check if all the used components latest version is deployed.

Similar Messages

WEBDAV rules repository not reflecting the changes

WEBDAV rules repository does not reflect the changes unless i restart the application server. i dont have a problem with file repository because i can change the file repository using the link from the BPEL console and the changes are reflected immediately from the very next instance. .
But in case of WEBDAV repository, even if i change the rules , they dont get reflected in any of the further instances unless i restart the server.
Please help on this one.

Another observation is that the entire bpel process(with decisionservice on webdav repository) works even if the webdav server is shut down.
The webdav server needs to be up only for the first instance of the bpel process. After that, even shutting down the webdav server does not effect any further instances and they all run smoothly.
This shows that the decison service builds up some kind of cache on the first call of the decisionservice. Some way to destroy this cache everytime the webdav repository changes will solve the problem.
Any help on this topic is highly appreciated.

Changes not reflected in portal after successful import

Hello,
I am having trouble with some transports in NWDI. I made some changes to the ESS Address Details dynpro and tested them in the development portal. I then imported them into CONS and the import ran successfully. However I cannot see the changes in the portal. I then ran the TCS Deployer and there was a long list of entries in the list of deployments for my buildspace. I then triggered the auto deployment and waited a few hours. This did not help either. I also checked to confirm that SDM was up and running which it was. Is anybody able to give me some advice on this?
Thanks a lot,
Ashley Butterfield

i have faced the same problem, but after 30 hours all the deployements are done, we got some thing around 511 deployement request on the consolidation server,
Cheers,
Apparao

Photos not saved after sharpening and denoising-shows on screen correctly but when am trying to email it, does not reflect the changes?

I have tried to change pic's like sharpen and de-noise features, on screen ot shows all perfect, but when I try to email them, all the changes are lost, anyone can help with the same?
Thanks in advance.

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Template not reflecting the change.

Hi All,
I am working on Adobe output Designer5.5 version. I am now trying to modify an existing template. The changes done to the template design are not getting reflected in the printed output. Also additional lines which are not visible on the template design are printed on the output.
Can someone please suggest on the a solution for this.
Thanks and Regards,
Benila Sophy.

Sometimes if you have objects (fields or lines for example) that get into the "unprintable" area of the form you can get really wierd results depending on the printer. If you are using subforms, be sure that -aapoff is set. If you like, send me your ifd and a sample data file and I would be happy to have a look at it.
[email protected]

My JSP file does not reflec the change of a Bean

My test environment: Win 2000, JDK 1.3.1, OC4J(standalone)
My problem:
In servlet, the change of a Strng value is reflected at the next refresh of a browser.
But, when a jsp file call a bean's getXXX(return a String value) method, and if the String value of that bean is changed, the next refresh or visit to that jsp file does not reflect the change of that bean.
For example:
1) TestClass.java
public class TestClass {
private String txt;
public class TestClass {
txt = "Test"; ----- (g
public String getTxt() {
return txt;
2) test.jsp
<html><body>
<h2>
<% TestClass test = new TestClass(); --(h
out.print(test.getTxt()); %> --(i
</h2>
</body></html>
In my first vistit to "http://localhost:8888/test.jsp" the brower shows "Test" String, but after I change the txt value to "Test1"((g) the brower does not reflect the change.
I found that if I use <jsp:useBean id="test" class="TestClass" /> instead of (h-(i line, the brower reflects the change of the bean.
Why does this occur?
Thaks in advance.
PS) In some cases(Not above example), I get the java.lang.ClassCastException.
So Each time I change a Servlet or a Bean, I restart OC4J.
null

SangKyu,
<jsp:useBean > has a property called scope, which defaults to "page".
So the bean gets reset everytime you reload the page.
Can I suggest that you set it to "session"?
The following syntax card I have found userful:
http://java.sun.com/products/jsp/syntax.pdf
Cheers,
Scott
Atlassian - Supporting YOUR 'Orion/OC4J' World
http://www.atlassian.com - [EMAIL][email protected][EMAIL]

Tree table is not reflecting the updated model data changes at the front end

I have two tables ,
1) Provider table(tree table) 2)member table
I have implemented drag and drop functionality using jQuery UI on both tables.
In my scenario when I drag a member from the member table and drop it on the Provider table and also when I delete an assigned member from the provider table I will update the data fetched from odata model and again I will call the method which binds the data to the provider table so that the table will reflect the changes.
here is the code,
on drop:
$("#Provider tbody tr").droppable({
drop: function(event){
oController.AssignMember(oProviderId, oMemberId)
}).disableSelection();
Assign member function: here am updating the model.
AssignMember : function(oProviderId, oMemberId){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var oParameters = {};
oParameters.PROVIDER_ID = oProviderId;
oParameters.MEMBER_ID = oMemberId;
oParameters.CREATED_ON = new Date();
oModel.setHeaders({"content-type" : "application/json;charset=utf-8"});
oModel.create( "/PROVIDERMEMBERS", oParameters, null, function() {
var oController = sap.ui.controller("adsm.provider.member_assignment_view");
oController.GetProviderData();
},function(jqXHR) {
var errorMessage = jqXHR.response.body;
var jsondata = JSON.parse(errorMessage);
sap.ui.commons.MessageBox.alert(jsondata.error.message.value);
GetProviderData function: here i bind the data to the table
GetProviderData: function(){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var Context = "/PROVIDERS?expand=ASSIGNEDMEMBERS&$select=NAME,ID,ASSIGNEDMEMBERS/NAME,ASSIGNEDMEMBERS/ID,ASSIGNEDMEMBERS/PROVIDER_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
var outputJson = {};
var p = 0;
var r = {};
if (oEventdata) {
r = oEventdata;
try {
if (oEventdata.d){
r = oEventdata.d;
} catch(e){
//alert('oEventdata.d failed');
try {
if (oEventdata.d.results){
r = oEventdata.d.results;
} catch(e){
//alert('oEventdata.d.results failed');
try {
if (oEventdata.results){
r = oEventdata.results;
} catch(e){
//alert('oEventdata.results failed');
$.each(r, function(i, j) {
outputJson[p] = {};
outputJson[p]["NAME"] = j.NAME;
outputJson[p]["ID"] = j.ID;
outputJson[p]["PROVIDER_ID"] = j.ID;
outputJson[p]["DELETE"] = 0;
var m = 0;
if (j.ASSIGNEDMEMBERS.results.length > 0) {
$.each(j.ASSIGNEDMEMBERS.results, function(a,b) {
outputJson[p][m] = { NAME: b.NAME,
ID : b.ID,
PROVIDER_ID: b.PROVIDER_ID,
DELETE: 1};
m++;
p++;
var oModel = new sap.ui.model.json.JSONModel();
oModel.setData(outputJson);
oTable.setModel(oModel);
function onError(oEvent){
console.log("Error on Provider Members");
oTable.bindRows({
path:"/"
Its working fine in chrome but in IE the model data gets updated but the table is not reflecting the changes at front end.Can anyone suggest me a possible solution to fix this?
Please have a look at the attached screen shots.
Best regards,
Amala Suganya.

Hi Amala,
I think this will help you:
Disabling Cache for CRUD/FI OData scenarios for a UI5 Application on Internet Explorer
Kind regards,
RW

Output error:the name of the package "greet" does not reflect the location of this file...

output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?

The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

Someone changed my icloud login password, and I can not activate the iPhone after recovery

someone changed my itslud login password, and I can not activate the iPhone after
recovery

You could try to reset your password via a webbrowser here: https://appleid.apple.com

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

Alv grid - call transaction 'ME22N' and reflect the change made in alv grid

Hi,
<u>Scenario</u>
I have an alv list which has fields Purchase document no. (EBELN) and Item delivery date (EINDT). EBELN field is hot spot enabled. when i click on that transaction 'ME22' is called. I have done this using USER_COMMAND subroutine.the code is given.
      FORM USER_COMMAND                                             *
Call transaction ME22N on clicking Document number                 *
FORM USER_COMMAND USING F_UCOMM LIKE SY-UCOMM
                I_SELFIELD TYPE SLIS_SELFIELD.
DATA: F_SUBRC LIKE SY-SUBRC,
        s_arseg like G_T_PORD. "the internal table used is G_T_PORD
CASE F_UCOMM.
    WHEN '&IC1'.
      IF i_selfield-fieldname = 'EBELN'.
        READ TABLE G_T_PORD INDEX i_selfield-tabindex INTO s_arseg.
        SET PARAMETER ID 'BES' FIELD s_arseg-ebeln.
        CALL TRANSACTION 'ME22N' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
endform.
<u>Requirement</u>
After calling the transaction, If the user changes the Item delivery date (EINDT) at the ME22 transaction screen, the new date needs to be reflected in the ALV grid.
Plz help it is very urgent.

The first method (using selfield-refresh = 'X'.) didn't work as the internal table doesnt get modified when the user make changes in Item delivery date(EINDT) at ME22 transaction screen. The 2nd method is OO,which can't be used in my case.
I tried calling the subroutine for populating the itab (G_T_PORD) and the subroutine for displaying the alv grid immediately after calling ME22N transaction. Still it is not reflecting the new date in the output alv. The code is given below.
      FORM USER_COMMAND                                             *
Call transaction ME22N on clicking Document number                 *
FORM USER_COMMAND USING F_UCOMM LIKE SY-UCOMM
                I_SELFIELD TYPE SLIS_SELFIELD.
DATA: F_SUBRC LIKE SY-SUBRC,
        s_arseg like G_T_PORD.
CASE F_UCOMM.
    WHEN '&IC1'.
      IF i_selfield-fieldname = 'EBELN'.
        READ TABLE G_T_PORD INDEX i_selfield-tabindex INTO s_arseg.
        SET PARAMETER ID 'BES' FIELD s_arseg-ebeln.
        CALL TRANSACTION 'ME22N' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
        refresh G_T_PORD.
        perform F1000_POPULATE_PO.
        perform F2000_DISPLAY_PO .
endform.

Not reflecting the new value of the AWvariable

I am working with Jdeveloper and BI beans
we are using Java Analytical workspace API for connecting and saving the user input as a Analytical workspace Variable
by using fallowing code
awConn.executeCommand("awvariable=value");
here the problem is i can not made this assignment perminent in Analytical Workspace
i.e after execution of the program i checked with AnallyticalworkSpace manager's worksheet it not reflecting the new value of the AWvariable. It is showing only old value.
how can i do that assignment it from java api .
any one can help me

That other post looks different, though - the OP is now manipulating the model.The OPs statement of the problem was:
Adding new data to the exitsting model causes the JList to display blank when I refresh the screen.
The suggestion in the other posting was to change the model not the array and the tutorial has a working example of this.
The OPs question was:
When my action performed creates a new instance of the model everything works fine but is this how it should work?
The answer to this is no, you don't need to change the model, just update the model.
So if the OP read the other posting and read the tutorial they should have an answer to their problem.
As you suggested there is no need to create a custom model. The example in the tutorial uses the default list model, if the OP read the tutorial they would know that.

Change the tax code at order header level that reflect the change in all it

Dear consultant,
Change the tax code at order header level that reflect the change in all items lines under this order
Facts:
Define tax code,
Assign it to bill & ship to customers,
I do all setup in oracle receivable guide for defining tax
Examples: I navigate to order management to create order
First I select the customer and order type after that I navigate to tab line
I enter the item in the first line the tax code coming by default
I enter the second items line also the tax code coming by default etc three ,four, five until line 40
Now I want to change the tax code for all items but not by enter and change it in each line? No,
I want the way that I change Tax Code at order header after that the change is reflect in all items line
Business Impacts:
Suppose I create order include 40 items , I want to change the tax code that coming by default , that require me to enter in each line to change tax cod 40 times ,this not logic and not acceptable from my customer

Hi,
The defaulting rules apply only for the first time when you are adding new lines on to the Sales Order. Respective field vaues will be defaulted from the SO header level.
In case, if you want to update all the 40 lines for Tax Code in one shot, then please select all the lines on the sales order, try Mass Change.
(Navigation: Tools->Mass Change).
Regards,
Hemanth

Hi I just updated my payment option but did not purchased anything but after successfully updation my a/c got deducted...why?

Hi I just updated my payment option for app store but did not purchased anything but after successfully updation my a/c got deducted...why?

Each time that you add or change the card details on your account then a small temporary store holding charge may be applied to check that the card details are correct, that the card is active, and that it's registered to exactly the same name and address as on your iTunes account - it should disappear within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

EAR file not reflecting the changes after successful deployment

Similar Messages

Maybe you are looking for