Ear piece problem

I bought BB 8520 curve before 2 weeks..now im facing a problem with ear piece..im able to talk only through headset and not through the device..im really frustrated..i gave the mobile to service.i l get only after a week..now im usin an ordinary nokia 1100 mobile..in world ruined me..i ave got also a problem in bluetooth (can send and receive files)....in world....

Did the same headset worked before? Then the button might be broken.
If it is a new headset, which phone do you use? Still your Nokia C2-01? Then, does this help?

Similar Messages

  • I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak - I think that my ear piece and mike have both got magnetised how do fix the problem

    I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
    I think that my ear piece and mike have both got magnetised how do fix the problem
    Please help

    I have the same problem!! It lead to many other problems with my phone
    I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally!

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • Problem with ear piece

    I am using the communicator 9500 model. Recently I started having earing problems when receiving a call. I can only hear a caller with the speaker phone, i.e. when the phone is openned. This affect my privacy, as everyone could hear my conversations. However, when I take the battery off and turn it on again, the ear piece would start working, but for a few hour only. What do I do and what could be the problem?

    maybe you could take the phone to an engineer? sounds like a problem with the hardware itself...

  • I'm unable to hear anything through the ear piece of my 3Gs, any advice? I've tried the normal unplugging of a set of ear phones several times. This hasn't resolved the problem

    I'm unable to hear anything through the ear piece of my 3Gs, any advice? I've tried the normal unplugging of a set of ear phones several times. This hasn't resolved the problem!

    I'm unable to hear anything through the ear piece of my 3Gs, any advice? I've tried the normal unplugging of a set of ear phones several times. This hasn't resolved the problem!

  • I am having problems with my ear pieces being pick up by bluetooth.  Do you have to BUY a special earpiece for the iphone 5?

    I have two ear pieces, one practically new, I used with the iphone 4 I had.  The iphone 5 is not discovering the earpieces, and I have no hands free capability.  Do I have to buy a special earpiece for the 5 or is there a patch or something coming out?
    SGBH

    You do not need a special headset for your iPhone. Did you pair the headset with the new iPhone? You may have to read the instructions for the headset to see if you have to put it in "discovery" mode before it will show up on the iPhone's Bluetooth settings page.

  • TS4449 I can no longer hear music on my iPhone unless I use an ear piece could you please help

    For a couple of days now I can no longer hear music (or if I play a video with audio) unless I connect an ear piece. I can't find anything in setting that turns this feature on or off unless I have some hardware problem. Help?

    Try your volume buttons, if the slider does not show, then there is a short in the iPhone charging port. Clean charging port with toothbrush and small amount of isopropyl alcohol. If still problem the replacement part is iPhone charging port with flex cable, lower mic, and home button flex connector, all a single less than $10 part. Apple handles this problem with Warranty or AppleCare with Replacement iPhone 4S, if no coverage it will cost $199 for replacement iPhone 4S.

  • Microphone no longer works with ear piece

    I have a BB 9800, and I recently downloaded the latest 6.0 OS Bundle 2921. Since then, I cannot use the ear piece when making calls. The speaker/handset menu goes back and forth and there is no sound in the ear piece. I can no longer take calls in the car while I drive. How do you resolve the problem?

    Hi and Welcome to the Community!
    Something may have gone wrong during the OS load, which would then mean reloading would be the thing to do. Or, there could be something wrong with that OS package, and you should try a different one.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try this procedure to perhaps narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Left ear piece stopped working w/my iPod mini

    Just like the subject line says, the left ear piece stopped working with my iPod mini after using a regular pair of black headphones for a couple weeks. Gee, this must mean your headphones were garbage? Well I purchased a pair of $5 ear phones that didn't work well at all with my iPod. Gee, I keep buying cheap ear phones. How about purchasing the authentic Apple ear buds? Well that's exactly what I did 3 weeks ago. After purchasing the ear buds for $30 that were made by Apple with the assumption it must work just fine, I tested them and found out they didn't work, however I plugged them into other devices and it worked just fine. I exchanged the pair and same problem.
    So yeah, something is effed up with my iPod where it won't play any audio in the left ear bud, however when I plug my ear phones or headphones into the slot on the iPod about half way in then I can hear the music just fine on both sides.
    What do I do? Am I stuck with Apple's problem with their product for good? Can they do something about this problem? Is there any steps I can follow to open the 'pod and fix it myself?

    This has helped people hearing warbled sound through their earbuds. Maybe it could help you, too?
    "Hello everybody,
    I have found a solution for my problem, I hope it can help you guys too. I found this following link to get my ipod open:
    http://www.answerbag.com/q_view.php/30180
    When I opened it I discovered that the connection to the little print (?) where you plug in your headphones was loose (it is a piece with both the headphone plug and the hold function). So I simply reconnected it, and voila, my ipod was fixed! Good luck!"
    "I had the same problem and fixed it by following the procedures to opening the mini to replace the battery. Then you will see the CB that the headphones plugs into. This CB (circuit board) plugs into the main ( mother board )
    Mine had worked it's way partly out. I pushed this plug back on securely and the headphones now work. Hope this helps. You can find the instructions for changing the battery by googling changing the battery on a mini IPOD."

  • Ear piece speaker has stopped working. help?

    i have to use my loud speaker to talk to people over the phone as my ear piece speaker has broken suddenly. does anyone know the best way to fix this?

    Please visit http://www8.hp.com/uk/en/home.html
    on right hand side top, click "connect with HP" icon, you have options to email HP or call HP.
    hope it helps, Good luck !!!!
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Sound is coming from the ear-piece and its really really low

    Title pretty much says it.
    My iPhone is acting really weird ever since this morning, sound isnt coming from the bottom speakers anymore but instead from the ear-piece and its really low.
    I tried resetting the phone with holding down the home and sleep button at the same time but its still the same.
    Anyone else having this problem?

    Connect the headset to a computer or stereo or anything else with 3,5mm minijcack to see if the headset is ok of they work there then your headset is defect if not your phone is the problem

  • Can't hear on the ear anything on the ear piece.

    I have experienced not being able to hear on the ear piece and only the speaker phone. Is anyone else having this problem, if so why?

    The same exact thing happened to me last week! I called Apple and they told me to blow into the ear jack and insert the headphone jack into the opening a few times quickly. They said that dust could settle in there. Strange! I tried this over and over - NOTHING happened! Oddly enough my ring tones worked normally but that was it. Apple told me that they could not help me over the phone and that I should take the phone into an Apple store for repair. I was really upset. My phone is about four months old. The next day at work I played around with it and it finally worked normally! There had to have been a problem other than a little dust if it is happening to other people! Come on Apple! This is an expensive phone and customer service should be able to be more of a help.

  • Need recommendations for bluetooth headset/ear piece

    What bluetooth head set/ear piece is best and compatible with iPhone?
    Thanks

    I've used several, and landed on the Plantronics 655. I think a newer version is out now (the 665, I think). The headset is small and sounds great, it comes with several different earpieces to suit the size of your ear canal, the recharging options are good, and it has a good battery life.
    I just started using a Aliph Jawbone, and so far it's very very good, too. I've heard very good reviews for it from others.
    P.S. I've used both with the iPhone, no problems.

  • Cannot adjust ear piece sound volume while Incoming call

    Receiving an imcoming call with ear-piece plugged, the sound volume becomes maximum and cannot be adjusted from both ear-piece and iPhone side button.
    Playing music, the sound volume is normal and ear-piece and side button are adjustable.
    Thank you and look forward solutions.

    From the iPhone user manual, Restarting or resetting iPhone
    If something isn’t working right, try restarting iPhone, force quitting an app, or resetting iPhone.
    Restart iPhone: Press and hold the On/Off button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off button until the Apple logo appears.
    If you can’t turn off iPhone or if the problem continues, you may need to reset iPhone. A reset should be done only if turning iPhone off and on doesn’t resolve the problem.
    Reset iPhone: Press and hold both the On/Off button and the Home button for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix B, “Support and Other Information”
    User troubleshooting steps, Appendix B, page 157 http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Does your ear piece on the phone rattle?

    my volume is set to about mid level on the ear piece built into the phone itself. when i first listen to the ATT voice setup automated voice, I noticed it was rattling the the phone speaker.
    Then someone called me, and sure enough, it sounds like a crackle, or rattle in the ear piece. Turn it down where I can barely hear it, and it stops the rattle.
    F

    no problem here (or hear) - or with anyone I have talked too that has one. Mine sounds fine.
    Here's how you fix it. Drive to your local Apple store and ask them to replace the phone with a non-rattle version. Maybe that one was designed for young children or snake wranglers in west texas.

Maybe you are looking for

  • How to retreive data from the column of CLOb  dataype in BPEL.

    Hello Everyone, I have a scenario in which i have two databses primary and secondary. In first bpel process i am checking if primary database is down then store the payload in temp staging table in secondary database. That payload is getting stored i

  • Search drivers for Creative webcam N10225, PD1110 on Windows Vista 64

    I'm searching drivers to run my webcam on a Pc with windows vista 64 Creative webcam N10225, PD1110 Thank You

  • "how do i synchronize between two outputs"

    Hi I'm using a bapi data service "po_bapi_getlist" which have two outputs :header and raws. When I'm connecting each output to table view, the output information is not synchronized, when i put the cursor on the line's header - "po nam" the cursor is

  • Spawning another java process after System.exit(0);

    Hi everyone I have an application that Im trying to test. Unfortunately one of these tests requires me to spawn another java process after a System.exit(0); has executed. Since this exits the VM its proving very difficult. Does anyone know of a way t

  • Salesforce attachment export corrupts pdf

    I am using informatica to export attachments from salesforce and save them to a  folder on a unix server. I am following a process similar to the attachment (this was from another discussion in this forum). This export works fine for most file types