Ear Piercing crash of death....Take III
Hello again,
As detailed in:
https://forum-en.msi.com/index.php?threadid=48650&sid=&hilightuser=39974
and followed up in:
https://forum-en.msi.com/index.php?threadid=51222&sid=&hilightuser=39974
the crash is back, but more info is available this time.
Here are my current settings:
-Fast writes are off
-Spread spectrum is disabled
-mem voltage 2.65
-AGP voltage 1.65
-Catalyst 4.6 drivers
-AGP aperture 128
Here's where it gets a bit interesting. My CDROM drive died, so I had to replace it via RMA. While the drive was removed, the system was stable and experienced none of the aforementioned crashes. Just reinstalled the new drive and voila, they're back. Ok, this points to a bit too much draw on the PSU perhaps, but shouldnt the ENERMAX 465 be able to handle it?? I mean come on, 33A on the 12V rail should be enough for the system as well as a USB toaster or hairdryer???!!
Should I try raising the AGP / Mem voltage a bit more?? When should I worry about frying my components? As usual, any help would be greatly appreciated.
Oh, BTW, the system temperature / CPU temperature are steady at 33 and 39, respectively, even under load. Max system temp was 38C, CPU 42C.
Thanks for any input.
Hello,
It looks like I’m having the same problem. After about 30 minutes, the screen goes black and I heard noise. When I run a game, switch back to the desktop and run the game in the background, there is no problem. (Edit: when I switch back after 1 hours, the screen goes black after 1 minute)
The problems started when I installed (Before I installed this I had no problem):
* New PSU (Antec Truepower)
* Audigy 2 ZS
* 1x 512MB module. (total 1,5GB)
The 512MB extra RAM didn’t work (memory problems), so it’s not installed now.
Things I’ve tried so far:
* Replaced the RAM modules --> didn’t solved the problem
* Run memtest for 8 hours and no problems found
* Replaced my new PSU with the old PSU (Aopen 350W) --> didn’t solve the problem
* Replaced the Asus radeon 9800XT with Club-3d 9500pro --> didn’t solve the problem
* Uninstalled creative drivers, removed the audigy and used on-board sound --> didn’t solve the problem.
* Tried several bios setting (DDR333/ manual voltage setting/AGP setting)
* Uninstalled latest Ati driver 4.6 (manually cleared registry) and installed directx, Via V4.51 and Ati driver 4.2 --> didn’t solve the problem
* After I read the thread, disconnect the CD-Rom but it also didn’t solve the problem.
Current setting:
AGP fast write: disable
AGP speed: 4x
Spread spectrum: disable
AC’97 audio: disable
Serial port: disable
Parallel port: disable
1394 controller : disable
mem voltage : 2.6V
ATI drivers : 4.2
AGP aperture : 256
Temperature is not a problem, already checked that.
I hope this information helps to locate the problem.
So any help is appreciate,
Marcel
Similar Messages
-
Ear Piercing crash of death....revisited
Ok,
As posted in a previous thread,
https://forum-en.msi.com/index.php?threadid=48650&sid=&hilightuser=39974
I am experiencing the ear piercing crash during gaming only. Going along fine and suddenly-- nails down the chalkboard courtesy of the speakers, and a total system hang, remedied only by the reset button. Not even necessarily in heavy "combat" situations, happens just sometimes when booting the game (Call of Duty). Here's what I've tried.
-Dumped the "new" ATI drivers and went with the latest Omega's
-Got new PSU
-Graphics card is only device attached to the respective PSU line
-Reinstalled VIA 4 in 1's, DirectX and drivers, respectively
-Turned off AGP fast writes
-Turned off spread spectrum
-BIOS 1.6
-Banged head into desk, repeatedly.
Any pointers would be greatly appreciated. Hopefully it's not time to RMA the card.
Thanks in advance.Quote
Originally posted by shorner
Glad to see that I'm not the only one with this quirk. Interestingly, I upped the RAM voltage to 2.65, and have not experienced the crash since. Even got a few extra hours of "testing" ie. gaming, in with wife approval, as I had to be sure that this didn't happen to her while she was doing her work reports .
Not really sure why this works, as I have run memtest & prime95 etc etc for extended periods of time with no problems. MAybe the extra draw of the graphics card during gaming affects the RAM voltage???--shouldnt with a decent PSU. Maybe I'm on the "verge of stability" with the RAM settings and a little heat messes things up. Who knows.
So hopefully, this will continue to fix the problem, or fry my RAM...whichever.
Thanks for the help.
Hmmm....
Wonder if my wife would fall for that?
I think you may find, in most of these cases, it is a heat build up, as the heat builds even by only a few degrees, the PSUs output falls dramatically, that I think is why raising the volts often helps, I raise both AGP and DDR.
cheers
jocko -
Sound system gives horrificly LOUD, ear piercing feedback
Hello & Thanks,
G770 x64 homePremium
When I turn up the volume (fn+rightArrow)
the sound system gives horrificly LOUD, ear piercing feedback .
I followed this 9-Step in the knowledge base (better, but with vol at 60% , it starts up):
Windows 7
Click Start
Click Control Panel
Click Hardware and Sound
Click Sound
Click Recording tab
Highlight the Internal Microphone
Click Properties
Click Listen tab
Uncheck Listen to this device
Click OK
Pls, what else can I tweak to get rid of feedback .
Thanks..VernonDisable the internal mic if you don't need to use it.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?
Restoring the iPhone will reload its firmware.
Plug the iPhone into (the current version of) iTunes on your computer.
Let it sync. Then choose "Restore" from the iPhone's summary page in iTunes. -
When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks
I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps -
FCP crashes when i take clips offline
Using FCP 5.1.2 and AfterEffects 6
At first it would happen when i was trying to replace a clip created in AfterEffects. i'd need to make an adjustment or whatever and rather than making a new clip, i named it the same as the clip already online in FCP and told AfterEffects to replace it. When i tab back to FCP, i'd get the spinning beachball of death and FCP would stop responding.
Deciding to change my tactics, i decided i would take the clip offline in FCP FIRST and avoid the whole missing media thing. Well, when i asked FCP to take the clip offline (deleting of the disk), it got stuck in the making a video preview loop, with the bar at 100%, but never stopping. Can anyone tell me what i'm doing wrong here (or at least the main thing i'm doing wrong)?
Thanks,
Craig#30 - Deck recognition after Tiger Upgrade:
Shane's Stock Answer #30:
http://discussions.apple.com/thread.jspa?messageID=1063600􃪰
The credit for this goes to Bob Sidebotham:
I was just walked through a repair procedure by an Apple Care person, and it fixed my camera recognition problems (I have a Canon XL1 and sometime after installing Tiger, then 10.4.1, various patches (including Quicktime 7.1) and the latest Desktop Video patch, I've been unable to use the camera with Final Cut Express, and attempts to capture would result in a FCE crash).
The workaround is to download Quicktime manually, after removing the "receipts" which indicate that it is loaded. Specifically, I was told to do the following:
1. Navigate to Library -> Receipts on your main drive (not from your personal folder).
2. Remove all files of the form QuickTime*.pkg, where "*" is a version number. E.g. QuickTime600.pkg, QuickTime650.pkg, Quicktime700.pkg and QuickTime701.pkg. This simply tells your system that those packages are not installed.
3. Go to http://www.apple.com/quicktime/downloads and click on the "download Quicktime" link. DO NOT USE THE AUTOMATIC UPDATE UTILITY. Download QuickTimeInstallerX.dmg. Double click this file (probably on your desktop) and then invoke the installer by double clicking QuickTime701.pkg.
4. After your computer reboots, you should be able to restart FCP and see your camera.
Shane -
All apps that take pictures crash when I take a picture. Is this a known bug?
I have multiple apps that can take a picture, and when I take pictures from within the apps, they crash. It is all the picture taking apps (except the onboard camera app). So, Twitter, Bank of the West, and Contact Snapper.
Is anyone else having this problem?I'm sure someone in the world, among the millions and millions with an iPhone might have the problem you're describing. How does that help you, knowing this?
Basic troubleshooting steps right out of the manual are restart, reset, restore from backup, restore as new. Try each step in order until the problem is solved. -
Palm TX works only if power chord is plugged in, crashes if i take the power chord out
Hi,
I brought a new Palm TX in 2008. I never used it because I was busy with work and it was never used. I recently found it when cleaning my storage. I tried to charge it for 2 days continious. As soon as I take the power chord out, Palm TX crashes. It comes back up again only if I connect it to power supply. Does not work all by itself.
Sincerely
Sudhi
Post relates to: Palm TXThe battery is dead. There are many places online that sell batteries and do the repairs at nominal costs.
directfix.com has repair videos if you decide to tackle the job yourself. See here:
http://www.youtube.com/watch?v=TxluU4H-hVs
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
This happens to me and to two friends of mine. So it's hardly a coincidence.
I have done a fresh Windows 7 install (for other reasons) so I thought this problem (which I had since about version 8.0) would disappear. I was wrong.
Firefox and plugins are updated:
Firefox 13.0
Shockwave Flash 11.3 r300
GPU video drivers are also updated.
I came across the "plugin-container.exe solution" but it didn't solve the problem.
How to reproduce the bug.
Visit Youtube and click on some video. Minimize Firefox. Wait some seconds. Next time you restore the window Firefox crashes, you have to kill plugin-container.exe from the task manager OR you have to restart the entire browser in case you've disabled the plugin container.
The same bug should occur when having various tabs open and one of them is Youtube with a video playing. But also when Firefox has no focus and you have other windows on top of it (and a Flash video running or even paused).
Since this does happen:
-with a fresh install;
-with everything updated;
-even disabling the plugin controller;
it seems very very strange to me that this problem is STILL present since version 8.0 (or even before) and that there is so few reports of this bug around the internet.
I'm not complaining here, I'm just showing my perplexity about almost noone having this bug which is ruining my (and my friends') Firefox experience since the past years.
My purpose here is:
* to let you know about this problem;
* to know if other are experiencing it;
* hopefully to keep giving support to this thread and answer to your questions about this bug so to help this thing being fixed;For problems that occurred with Flash 11.2 and earlier, you might want to consider disabling graphics hardware acceleration in both Flash and Firefox.
'''Flash'''
Right-click any video in Flash Player and choose Settings.
Clear the checkbox for "Enable hardware acceleration"
'''Firefox'''
Save all work (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
Restart Firefox. -
Why does Firefox crashes and support takes me around and around in circles
Firefox won't open and I get the crash reporter instead. I used to have firefox and was re downloading it, but now it just crashes when I try to open it. Online support does nothing but run me around in circles!!!!
With which Firefox version do you have the crashes?
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes -
My iPhone let out an ear-piercing siren-like alarm?
It was about 6:30 in the morning at this point. I had no alarms set, and none of my push notifications would ever do this. But out of nowhere my phone let out this piercingly loud sound
The only way I can describe the sound is this: y'know how whenever you're listening to the radio or tv and the emergency alert service interrupts what you're listening to (either to do a test or warn you of hazardous weather) and it goes "beeeeep.....beeeeep....beeeeep....beep...beep...beep" and then you hear a high pitched "EEEERRRRR" sound?
Well, it sounded just like that high-pitched sound. And it sounded off in second long beeps (whereas a regular alarm sounds almost twice every second). And my phone vibrated even though I had it on do not disturb mode. There was some a text alert on my screen, and it filled the entire screen, but I was so tired and so freaked out by the sudden noise that I just unlocked my phone to the home screen to get the noise to stop
I know it wasn't an Amber alert because when I get one of those, it sounds off as a regular tri-tone alert and has a tiny amount of alert text
Does anyone know what this could have been? My iPhone is a 4s on the latest updateMy AT&T iPhone 5 just woke me up with an amber alert. Although I didn't figure what it was until the second one came in. What am I supposed to do, jump out of bed and join the manhunt???
Disabled on Settings-Notifications-Government Alerts, which are all the way on the bottom of the page. Annoying, and on by default? -
Take III : Load This With IE7B2
I'm starting to get the feeling no one use's IE7 Beta 2 ... I
don't either
but I ran this page through Browsershots.org and their screen
shot showed
this.
Load this page with Internet Explorer 7 Beta 2 :
http://www.avenuedesigners.com/quote.php
Notice the drop-down boxes are "smushed" (e.g., the text
"Select One" is
dropped behind the bottom of the box. This is only in IE7B2 -
not in IE6 or
Firefox or any other browser I've tested in so far.
The boxes are getting a height of 15px.
Kink they need to work-out or something I should be concerned
with?
Shane H
[email protected]
http://www.avenuedesigners.comHi Shane,
No IE7B2 here but what are you seeing? I see an unstyled page
in FF...
Take care
Kim
Shane H wrote:
> I'm starting to get the feeling no one use's IE7 Beta 2
... I don't either
> but I ran this page through Browsershots.org and their
screen shot showed
> this.
>
> *******
>
> Load this page with Internet Explorer 7 Beta 2 :
>
>
http://www.avenuedesigners.com/quote.php
>
> Notice the drop-down boxes are "smushed" (e.g., the text
"Select One" is
> dropped behind the bottom of the box. This is only in
IE7B2 - not in IE6 or
> Firefox or any other browser I've tested in so far.
>
> The boxes are getting a height of 15px.
>
> Kink they need to work-out or something I should be
concerned with?
>
> *******
>
kim
http://geekministry.com -
i want my money back its bad company take money for nothing (supportware)
You've tried deleting it and re-downloading and tried contacting the developer ?
If you have and you've had any response then try the 'report a problem' link from your purchase history to contact iTunes Support (we are fellow users here on these forums) : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Thanks for the helpful feedback, folks. I think I have the full-screen problem fixed. One shouldn't cache getGraphics () responses immediately after switching to full-screen mode, apparently.
Please give the game one more try - I hope you will like it:
http://www.thekillams.ca/andrew/downloads.php
cheers,
AndrewThanks - I'm glad its finally working! :)
(I've got the two player version finished, but not on this computer - I'll upload it on Monday.) -
Take III: Trigger Certain Pages within Frames
Okay - I'm going to rephrase the situation and hopefully it
will help out in
getting an answer.
There is a link on my one page (portfolio.html) that will
open another HTML
page (demovwr.html). Now this page (the demovwr.html) has a
two frames. When
the link on the portfolio.html page is clicked - how can I
load this other
HTML page (captaindans.html) inside the one frame on that
page? The same
would go with other links that will open the demovwr.html -
how would I get
blah.html to load when another link is clicked?
There's got to be a static way to accomplish this, no?
Shane H
[email protected]
http://www.avenuedesigners.comOne quick question - I'm using your JavaScript Dynamic script
and I'm
acknowledging you on the index.html page of the frameset -
but do you still
want me to leave in the comments, or can I delete them?
Shane H
[email protected]
http://www.avenuedesigners.com
"Shane H" <[email protected]> wrote in
message
news:[email protected]...
> Thierry!
>
> Thank you so much - you've finally solved my problem!
>
> --
> Shane H
> [email protected]
>
http://www.avenuedesigners.com
>
>
> "Thierry | www.TJKDesign.com"
<[email protected]> wrote in message
> news:[email protected]...
>> Shane H wrote:
>>> Eek - sorry, I'm not sure your article talks
about what I'm asking
>>> for, Thierry. And if it does - I was a bit lost.
I don't use frames
>>> at all but for this particular situation it was
most advantageous.
>>>
>>> I hate to do this - but can you explain to me
how to do what I'm
>>> trying to accomplish, or do you need furthur
explanation?
>>
>> This page shows how to do it client-side or
server-side:
>>
http://www.tjkdesign.com/articles/frames/5.asp
>> Another way is to simply call *different* framesets
depending on the pair
>> of
>> documents you need.
>>
>> HTH,
>> --
>> Thierry |
http://www.TJKDesign.com |
CSS-P Templates + Articles:
>> CSS Popups, CSS 3 Column Layout, CSS Tabs, CSS
Dropdown Menu,
>> TIP Method, Sliced Images, Clean Popup Windows, Easy
Maintenance.....
>>
>>
>>
>>> "Thierry | www.TJKDesign.com"
<[email protected]> wrote in
>>> message
news:[email protected]...
>>>> Shane H wrote:
>>>>> Okay - I'm going to rephrase the
situation and hopefully it will
>>>>> help out in getting an answer.
>>>>>
>>>>> There is a link on my one page
(portfolio.html) that will open
>>>>> another HTML page (demovwr.html). Now
this page (the demovwr.html)
>>>>> has a two frames. When the link on the
portfolio.html page is
>>>>> clicked - how can I load this other HTML
page (captaindans.html)
>>>>> inside the one frame on that page? The
same would go with other
>>>>> links that will open the demovwr.html -
how would I get blah.html
>>>>> to load when another link is clicked?
>>>>>
>>>>> There's got to be a static way to
accomplish this, no?
>>>>
>>>> I think it's around page 4 or 5:
>>>>
http://www.tjkdesign.com/articles/frames/default.asp
>>>>
>>>> HTH,
>>>> --
>>>> Thierry |
http://www.TJKDesign.com |
CSS-P Templates + Articles:
>>>> CSS Popups, CSS 3 Column Layout, CSS Tabs,
CSS Dropdown Menu,
>>>> TIP Method, Sliced Images, Clean Popup
Windows, Easy Maintenance.....
>>
>>
>
>
Maybe you are looking for
-
IPod not recognised by computer, won't charge + displays sad iPod face
Ok, whenever i attempt to charge my iPod with the mains, it resets itself then shows a sad ipod face. When i connect it to my computer it resets itself, shows the sad face and then sticks on the low battery screen. The "five r's" do absolutly nothing
-
TO_NUMBER and ORA-01722 invalid number pls delete
I cannot see where to delete a post I made. I found out my problem. It was in my NLS settings. Decimals were set to be commas instead of periods. please disregard this post, and delete if you are a moderator I recently tried to bring in lat/long coor
-
How to convert Oracle data types to ABAP types.
Hi, I have this oracle table table: Type of col. Char(6) Number Number Number Number Date I dont know how to convert column of number to abap types. I use exec sgl syntax and I try to insert value to abap structure. But structure <dyn_wa> is wrong.
-
Hello I'm facing problem in running Oracle 10g for first time my database on server win2000 and OC4J running Jinit working , but when I run the form the next error message appear on Java Console and on the Browser "JAVA.LANG.CLASS Not found Exception
-
Hi, I am doing XI to XI communication. Sender XI posts a message to receiver XI. but Receiver XI giving error that No receiver agreement found for sender to receiver. What could be the problem?