Ear plugs not working

Why doesn't my ear plugs from my ipod work on the iphone ? ... actually none of my 3rd party RCA plugs or head phones work either? Is different configuration due to the built in mic .?
Is there a adapter that works?
Thanks Mr braddyboy

http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=3DB 4EB78&fnode=home/shopiphone/iphone_accessories/cablesdocks&nplm=TN546LL/A
Did you try this?

Similar Messages

  • Ear buds not working

    New Ear Buds not working, I have made all kind of checks and adjustments.
    Thanks.

    They are the original ones with the iphone5, and yes I suppose they are under warranty. I don't have any other buds to experiment with. Are there any settings I can play with?
    Could there be a phone issue?
    Thanks.

  • Ear phone not working

    Ear phone not working when I make phone call I have to use speeker to resive call

    OK.  Thanks for letting us know.

  • IPhone 4 ear speaker not working

    Looking for more info regarding this problem..
    Purchased iPhone 4 for my wife and I last month.
    My iPhone ear-speaker went dead, but the external speaker, plug-in wired ear-phones work, and mic still work.
    I went to take it in, and then the darn thing started working again. lol  Same thing happened early this week - not working, then it started working again.
    Now my wife's iPhone 4 is starting to do the same thing. argh!
    Not really sure if it's hardware or software.. but anyone else on this forum experiencing this same problem?

    Yes. My Bluetooth on my iPhone 4 is enabled (to sync with my car).
    But my wife's iPhone 4's Bluetooth is not.
    I Googled this "ear-speaker problem" and found a few other reports, but no solutions (on Apple support forums).
    Just wondering if the people of this forum encountered the same thing.. thanks for your fast reply !

  • $80 Apple in-ear headphones not working with iPhone 4

    I spent $80 on a pair of in ear headphones and they do not work with iPhone 4. I can listen to music and talk but the volume controls are completely nonfunctional. So I used them on my friends 3GS and they work fine. How can Apple come out with a new phone that wont work with their own products? I used to love Apple until this F@#$ing iPhone 4 came out.

    According to Apple, they should work with the 4... http://store.apple.com/us/product/MA850G/A?fnode=MTY1NDA1MA&mco=MTM3NTM0Mjg
    Are they plugged in to your iPhone all the way?

  • I phone 5 left channel on ear buds not working

    We just bought I phone 5 phones.  My husbands left ear channl on his ear buds stopped working .  We changed ear buds and it started to work then stopped.  We went to the Apple store and had the phone exchanged.  Reloaded everything and now it has stopped working on his new phone.  Any suggestions would help .  Thanks

    Make sure the plug is fully seated; there should be no gap at all between the backshell of the plug and the phone. The last millimeter is sometimes difficult to close; you must push hard. If it is not fully seated the result will be the symptom you are describing.

  • IPhone 4 ear speaker not working after 2 restores and cleaning the headphone socket.

    Hi,
    I know this problem is not uncommon, but here goes...
    I have an iPhone 4 which was running iOS 5.1.1 a few days ago when the ear speaker stopped working.  I cant hear the other person when I make or recieve a call, but nothing else is wrong with the phone.  It is 18 months old.
    I've searched the discussions and seen some of the suggestions.  I tried cleaning out the headphone socket, with no luck.  I then tried a full restore and update to iOS 6.  This appeared to have worked.  I tried 2 calls and I could hear the other person.  I then left the phone alone for a couple of hours and when I tried it again, it had stopped working again.
    I have since done another full restore but the speaker is still not working at all.  The fact that it worked after the first restore suggests it's something simple or software related but I have no idea what else to try other than getting it repaired in a shop.  The problem is I am in Japan where my network (Softbank) and an independent repair shop have both quoted me the equivalent of $176 / £110 to fix it.
    Does anyone know anything else I can try before I give in and end up shelling out this ridiculous cost for something that is probably a 20 minute fix?
    Any help would be appreciated.
    Thanks

    I have the exact same problem with my ear speaker after my IOS 6 upgrade. My speakers work, bluetooth works, the earphones work, but the ear speaker doesn’t work. I noticed this IMMEDIATELY after the upgrade was completed. I also have the following problems:
    -Very slow call connect time. 30 - 45 seconds just to connect is typical. Signal strength is 5 bars (ATT)
    -Problems attaching to known networks
    -Very slow internet browsing with many timeouts on both the ATT 3G service and known Wi-Fi networks.
    - My camera was missing after the IOS 6 upgrade. I restored that from Restrictions inside of the Settings App
    - Music was so screwed up it was easier to just restore it
    I went to the Apple store hoping to get some support. Between my wife, my son, and myself we have purchased 4 iPhones and an iPad over the last few years with plans to purchase another iPad in a month or so. So it’s not like I' not familiar with Apple Technology and their typical level of support.
    The individual who waited on me was rude and condescending. He insisted that all of the problems were hardware related or ATT’s fault, or my fault. He further asserted that IOS 6 had NOTHING to do with any of the problems. I pointed out that it would be quite a coincidence for my hardware to break, for ATT to have network problems, and for me to suddenly forget how to use an iPhone at the same exact moment that IOS 6 had been installed. He maintained his position and offered to sell me another phone.
    I don’t expect the folks in the store to reprogram the OS. Mistakes happen. I’m going to guess that Apple’s OS programmers are already working on a fix for many of the IOS 6 complaints that are easy to find on Google. Assigning blame to the customer and denying any responsibility is not a model for success or customer service. I’m sure Apple wouldn’t accept that kind of excuse from their component manufacturers and don’t think it is how they should deal with their customers. Further, Apple wants to own the device. They want to control the apps, the OS, battery, the delivery channel. I’m good with that so long as when there is a problem, they own that as well.
    And BTW… I’m not including the maps in my list of issues with IOS 6 because I kind of like the new maps and am willing to give Apple the benefit of the doubt. I believe that their map service will get a lot better in a hurry.

  • Exit Plug not working in Portal

    Hi experts,
    I have a web dynpro application (WDP A) which fire an exit plug to another web dynpro application (WDP B). It works fine in normal web dynpro runtime. The architecture of the application is shown [here|http://img232.imageshack.us/img232/7172/exitplug.png].
    Now i have created an iView in the EP for WDP A. When the button which fires the exit plug is clicked, i get this error.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
    Seems exit plug is not working in portal run time. Any one has an idea on how to solve this?? Use portal navigation?? What is that?? any guideline and documentation on that??
    Thanks in advance.
    Best Regards,
    kityein
    Edited by: kityein lai on Aug 5, 2009 10:04 AM

    Hi,
    Now that your WD apps are running in a Portal they should be more "Portal aware".
    What I mean is that now they are part of a larger framework and you cannot just call the other WD app.
    To do this properly (as the error message says) you should use the portal navigation.
    Portal navigation consists of many variants: Normal, Dynamic, Quicklinks etc etc.
    I personally advice to use Quicklinks if you want to navigate between 2 applciations running in the portal but are not native-portal apps. Altough this might not fit your requrements in this scenario, I cannot say....
    In addtions here are some help resources:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/38/5dc53e5ae84d3be10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/97/b0ef8b24a64ae884f0ab246e54cae5/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/00c110606a5277e10000000a1553f7/frameset.htm
    Hope this helps you a bit...
    Benjamin Houttuin

  • Ear buds not working. Not due to broken headphones, so it must be the connector in the iPod that is not working.

    On my iPod Classic, the right ear bud does not work and the left one spots off and on. The music works fine on a dock, and I know it is not due to broken headphones (a problem I've encountered many times), because they work fine on other iPods, other headphones have the same problem on this iPod, so it must be the connector in the iPod that is not working. Can I fix this myself, do I need to take it in to get it fixed, or do I need a new iPod?

    Yes, if you got very steady hands, and you must have the correct tools to open the Ipod. (which is the most difficult part).
    For the parts, you can buy off ebay, the audio jack and cable, less than $20 I think.
    Those plastic opening tools that they are selling only works for cases that has been opened before, they dont worked for sealed virgin  iPod cases.
    The screws are quite tiny, so be careful, it might jump out off the window or into the some hole, so better lay white sheets of paper on the floor.
    Here is a 4 minute video on how to do it.
    http://www.youtube.com/watch?v=ILd9AqzLW60&feature=related

  • Suspendable plug not working in portal

    Hello
    I am having two DC.
    DC 1 is an web dynpro application which has a suspend plug (ToDC2) in its interface view.
    DC 2 is another web dynpro application which is having a default inbound plug in its interface view.
    Now, I am using URL of DC2 application to navigate from DC1 to DC2.
    String urlToTargetApp =
         WDURLGenerator.getApplicationURL(deployableObjectPart, urlParameters);
    wdThis.wdGetApp1ApplInterfaceViewController()
         .wdFirePlugToDC2(urlToTargetApp);
    This scenario is working fine if I execute my application directly outside portal.
    But in portal it gives me following error :
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Suspend-Plug must no be triggered when running in portal. Use portal navigation instead to navigate to another application!
    Now, I have read it in SDN contributed articles that above error must have come only if i would have been using an exit plug instead of suspend plug.
    In case of suspend plug you need to just set an application property "sap.suspendable.application = true" if using application within portal, as this will make it work.
    But it is not working here !
    Any comments please.
    Edited by: Saurabh Agarwal on May 21, 2010 12:27 PM

    No Vinit, unfortunately not.
    If you find a soltion then please revert back.
    Thanks

  • HELP!  Ear speaker not working ONLY on calls

    Hey,
    I just ran into this problem today and am really frustrated.  As of 3pm today my ear speaker stopped working but only when I make a call.  I can still hear my music and sounds and ringtones but when I connect to a call it doesn't work at all.
    I have tried the windex/alcohol method, tried the plugging in and unplugging ear buds, tried the turning on and off the speaker phone and still nothing works.  I also tried a hard reset and still have the same problem.  The only thing I haven't tried is a full blown retsore and was hoping to get an answer here before trying to restore the device.  I have an iPhone 3Gs.  Anyone here have any tips or thoughts as to why this stops working on calls only and works fine on everything else?
    I can hear the keypad when dialing but as soon as I hit "Call" the speaker just stops working.  HELP PLEASE!  Thanks.
    Seth

    If doing the hard reset (holding power button and home button) doens't work, try restoring the phone as a new phone.
    if that doesn't work - my guess is hardware failure. Call apple if under warranty or contact your carrier.

  • HT1338 ear phones not working

    every time I connect my ear phones, I get just one side working. I did try to connect different earphones and still having the same problem. I don't know if it is a hard ware thing or software issue. I did update the software and still havng the same problem

    Have you checked System Preferences/Sound to make sure the balance is not set all the way to one side? Check with the headphones plugged in.

  • Ipad mini lightening to USB camera plug not working

    Hi all,
    I recently purchased an ipad mini with a lightening to USB camera cable. The ipad does not recognise my camera and vice versa. It's like they are not plugged in.
    Have tried resetting ipad and camera, both have full batteries and have tried 2 different camera USB cables which both work when plugged into the computer.
    Camera is Olympus EP-3.
    Anyone else had this issue?

    Magsoff wrote:
    Hi all,
    I recently purchased an ipad mini with a lightening to USB camera cable. The ipad does not recognise my camera and vice versa. It's like they are not plugged in.
    Have tried resetting ipad and camera, both have full batteries and have tried 2 different camera USB cables which both work when plugged into the computer.
    Camera is Olympus EP-3.
    Anyone else had this issue?

  • Ear speaker not working while at home?

    Hello,
    New to this forum, and could not find any call error specific section, so I hope I posted this  in the correct one.
    I've had an odd problem lately which is that my ear speaker does at times not function, and this problem only occurs while Im at home. Whenever Im in another location, e.g outside or even while riding the train through areas with low connection it works, and the loud speaker always work. Has anyone encountered this problem and have a fix for it? I hate using the loud speaker, and I find this issue absurd. I have tried changing it to factory settings, force quitting phone app, reboot and safe mode reboot, all to no avail.
    Thanks in advance,
    Calle

    Sounds like the only way to find an answer. I have literally not seen a single post on the net having the same issue as the one I have. It worked fine today and yesterday when I used the ear speaker, the day before that it didnt work, so I understand nothing. I have not made any changes between when it didnt work and when it worked. :/ 
    Well, thanks for your help.

  • Receiver (ear speaker) not working on iPhone 5 after updating to iOS 7

    Since upgrading to iOS 7 (or 7.0.2) the receiver on my iPhone seems to have stopped working.
    I don't make / receive many voice calls - so not sure exactly when problem started.
    Every call I have received in the last 2 days has been silent, where the person calling me can hear my voice, but I cannot hear them.
    Also there is no sound when I make a call.
    Prior to this most recent calls have been silent at first, with the sound only kicking in after 5-10 seconds.
    I can turn speakerphone on - which works.
    I have performed the folowing to try to fix the problem:
    1) Restarted phone
    2) Reset all settings
    3) Restored from backup
    I've checked mute switch, tried volume buttons and ensured airplay is set to iPhone.
    I managed to make the receiver work again by wiping all settings and content, then setting up as a new phone.
    However I do not want to lose all the content, settings, app data saved on my phone, so this is not really an option.

    Yes I have done this 4 times, I am sorry I should've been more clear in the information I provided but thanks for replying

Maybe you are looking for