Ear volume on calls in and out really low on iphone 4s

any help ?
t

What troubleshooting have you tried? User troubleshooting includes restart, reset, restore from backup, restore as new. See what happens after that.

Similar Messages

Why do the sound and volume go in and out. Sometimes my iPhone and iPad loose the sound and volume

Why do the sound and volume go in and out. Sometimes my iPhone and iPad loose the sound and volume

It should remain the way you have adjusted them. Delete the System Preferences.plist per these instructions:
https://discussions.apple.com/docs/DOC-4301
Ciao.

Cant send SMS off iphone 4s but can send imessages and calls in and out still work.. help?

cant send SMS off iphone 4s but can send imessages and calls in and out still work.. help?

SMS is a carrier feature. Contact your carrier

TS2634 When ever I plug in my earphones the sound comes out really low

When ever I plug in my earphones the sound comes out really low and you barely can hear it.

The volume is set very quite I guess. Try adjusting the volume with the bottoms on the side. Your earphones could maybe cause some trouble too, are they damaged, are they as quite on another device?
Also note that your iPad remembers the earphones and will always adjust it back to the last setting these earphones had.

TS1398 My new IPad mini has poor wifi reception. Goes in and out. My IPod, IPhone, Ipad1 and Ipad2 work finer. I think it has wifi antenna issues. Does anyone else have this problem?

My new IPad mini has poor wifi reception. It goes in and out. My IPod, Iphone4, Ipad1 and Ipad2 work fine. What can I do? Does anyone else have this problem?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Broken and out-of-warrent foreign iphone 4s

I bought an iphone 4s approximately 2 years ago fron USA. As apple provides just an year warrenty, my iphone 4s is now out of warrenty. The main issue is that i bought my iphone from USA and at present i'm in India and the back and front glass of my iphone 4s is cracked.So, what should i do now as im in india and my iphone 4s will be considered as foreign and out-of warrenty iphone.
reply ASAP

If the phone is still working then find a 3rd party repair site and have them replace the front and back glass. You can only do an out-of-warranty replacement of the entire phone if you return to the US with it or send it to a friend or relative to take it in.

Calls In and Out - Issues with

Having sound issues when calling or receiving calls. I'm hearing that I sound like Im in a tin can, lots of static, background noise or echoing from anyone calling me. I am coming up on the expiration of my 14 day 'trial' / can return the phone period and wondering if I should or not. I was also talked into buying a LifeProof case for the phone and am wondering if that could be the issue and not the phone itself. My son insists it's my case but it's so difficult to get off and the on again. Any input??

Hello Joynchris
I'm sorry your having issues with your sound. It may very well be the case. I would recommend trying it without the case.
JoeL_VZW
Follow us on Twitter @ VZWSupport

Obtaining a call log of all calls incoming and out going from your website.

I do not have paper billing at this time and I am trying to get a list of all incoming and outgoing phone calls made from my home phone number on your website. Cannot get a hold of anyone from customer service on the phone. What steps are needed to take to get this information.
Thanks,
Patricia

Yes. Call failed. Call failed Call failed. Constantly. I'm pretty sure it's iOS4.
I found this helpful.
http://www.tuaw.com/2010/07/22/ios-4-and-iphone-3g-is-a-match-made-in-whats-the- opposite-of/

HT5012 Why can't I send or receive texts or phone calls in and out?

I can't send text or recieve or ring out or people ring me

What did your carrier say when you asked them?

Where can I get a really low-priced iPhone 3G case?

Where can I buy a high quality, good, preferably new, iPhone 3G case that is very low in price? I'm talking below $5.
Thanks. Remember, I want a *high quality* case that will last a while and will actually *protect my phone*.
And try to give me something that YOU would buy if you didn't have a lot of money to spend on a case

Hi Zahid K,
I don't know of an iPhone case that costs less than $5, but you can find list of iPhone cases with ratings and reviews on the Apple online store.
http://store.apple.com/us/browse/home/shopiphone/iphoneaccessories/cases?mco=MTY1NDIwMg&s=priceLH
-Jason

Sound is coming from the ear-piece and its really really low

Title pretty much says it.
My iPhone is acting really weird ever since this morning, sound isnt coming from the bottom speakers anymore but instead from the ear-piece and its really low.
I tried resetting the phone with holding down the home and sleep button at the same time but its still the same.
Anyone else having this problem?

Connect the headset to a computer or stereo or anything else with 3,5mm minijcack to see if the headset is ok of they work there then your headset is defect if not your phone is the problem

Speaker volume seems unreliable - cutting in and out

sometimes callers have a hard time to hear me, my volume is cutting in and out. It is not a question of reception. It is almost as if the speakers or microphone goes into some kind of sleep mode and takes a while to wake up after I start speaking.
Any idea why that could be?

There are curves, but not in the middle of the portion of the track I was listening to. If I were to listen to the same portion on my old iBook, no problem but the iMac is the only one presenting the issue. However, when I listen to the track playback over headphones connected to the iMac, the track's volume is fine.

Music fading in and out with XtremeGam

OK, I have Vista Ultimate x64. I also have the Logitech Z-5500 5. speakers. Everything ws sounding perfect and couldn't ask for anything to be better after I squared away my issues with not having EAX effects while gaming. Truthfully I really have no idea how I did that but the EAX worked fine in games after I download Alchemy but the games I am playing are not supported in Alchemy....strange. Anyway, when I built the new computer I only downloaded the drivers and no other software, I was told I needed to download Alchemy and also get the Creative Audio Launcher in order to get the EAX to work properly. After I did that all went to hell with playing music and only music. I now have issues with music in Itunes fading in and out really bad. I had uninstalled the Creative Audio Console(I had downloaded it a few days after the Alchemy and that was when the stufff hit the fan) and after doing that I ended up with a problem with Control Panel and the Windows games not opening. I took care of that problem so now it is on to why the music is still fading in and out I had considered that it may be I need to uninstall ALL of the Creative crap and then install only what I am needing, the Creative Audio Console(not the Launcher), drivers, and Alchemy. So any ideas of what can actually be the problem(s) I really hate to listen to music that is constantly fading in and out and my wife more or less uses the computer as a huge Mp3 player, she is real upset and is going off the walls not having her music play right. She listens to the music kind of loud and that is real noticable at those high volumes.Also, the speakers are not the issue, I hooked up my old set and I know they worked properly and they still gavve me the same results. I figure it has to be either the sound card or Itunes. I have not played music in any other media player yet so it is possible for it to be an Itunes problem instead. I plan on posting on their forums as well to see if I can get any help from that end. EDIT:Windows Vista Ultimate x644Gb of RAMXtremeGamerEVGA 8800GTIntel E8400Gigabyte GA-P35-DS4(rev. 2.0)If any of this will help.

I had the same thing with Winamp. What I did was add Winamp to Alchemy manually and that cleared it up. I don't know if the same will work for iTunes or not though. Good luck!

Why LabVIEW crashes when I'm trying to use "in" and "out" in my DLL?

Calling function from DLL using Call Library Function.
Function source:
extern "C" __declspec(dllexport) long ReadPort(long base, long off)
unsigned char c;
long d;
__asm
push eax
push dx
push ax
mov eax, base
add eax, off
mov dx, ax
in al, dx
mov c, al
pop ax
pop dx
pop eax
d = c;
return d;
Using LabVIEW 5.0 and MSVC 6
OS: Win2k

> I am sure... When I delete "in" command from DLL source, it works...
> but when I use "in" or "out" assembler command, LV crashes (sometimes
> without any error message)...
>
Windowd 2000, and most of the more modern MS OSes do not allow direct
access to HW. That means that applications do not have permission to
call in and out instructions. Those instructions are protected and any
app calling them will be terminated because it did something illegal.
To get direct I/O to work, you should look for the driver on the NI web
site that will redirect it for you.
Greg McKaskle

Why is the volume on my MacBook Pro suddenly so low?

The volume on my macbook pro is really low. It used to be much better, now I can hardly hear people when on skype or listening to music... everything is set on high volume... help!?!

Try:
Reboot into Safe Mode then reboot normally. Safe mode takes longer to boot than booting regularly. That is normal.
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

Ear volume on calls in and out really low on iphone 4s

Similar Messages

Maybe you are looking for