Earbud volume has stopped working

When I got my iPhone 5 the earbud volume was working for the new apple earbuds and my senheissers. Today I noticed neither are working anymore.

Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

Similar Messages

My volume has stopped working completely after the iOS 8 update

My sound has completely stopped working after the ios 8 update yesterday.please help

I just now spoke with Apple support as I had a similar issue, where the volume on some apps and games did not work, and what I was told helped me out greatly.
what I was told to do is hold down the power and the home screen button at the same time for about three or four seconds until the device shuts down and you should see it restarting. If the device does not restart on its own hit the power button and it should restart and then you should have no problem at all everything should be as it should be.
I hope this helps you or someone else in a similar situation as it is helped me and hope this makes your day better.
My device is iPad air Retina.

My iPhone 4s was working fine yesterday but today, the volume has stopped working entirely. A song will play for approximately 9 seconds and then will cut the sound completely. It has done this on YouTube, Music, and my ringer. How do I fix it?

My phone played music fine yesterday. Today, headphones plugged in or not, my music (including YouTube and ringer) stops working. The timer still counts up as though it is still working but the volume turns gray or not at all and the little circle volume control disappears. How can I get my music working again?

Hello ladypinecone,
Thank you for using Apple Support Communities.
The following article provides you with information to troubleshoot sound issues with your iPhone.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Regards,
Jeff D.

HT1655 I have a 3rd generation shuffle. It has stopped working with the earphones it came w/pinch buttons on the cord. It will no longer advance to next song/change the volume. Even with a new set of Apple earbuds, it does same thing. How do i factory

I have a 3rd generation shuffle. It has stopped working with the earphones it came w/pinch buttons on the cord. It will no longer advance to next song/change the volume. Even with a new set of Apple earbuds, it does same thing. How do i factory reset or fix the problem?

Hello there, RufusChloe.
The following iPod Troubleshooting Assistant should help with troubleshooting your issue:
Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/shuffle3gen/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section.

My windows say the quicktouch on screen display has stopped working and i have no volume??

HP Pavillion Entertainment PC dv6000
p/n KC302UA
operating system-Windows Vista
message says Quicktouch Screen display has stopped working. I have no volume and my volume bar wont work.
How do I fix this?

Please do a BIOS update and this may fix the issue,
If you wanna know how to do the same, please go to HP.com- Support & Drivers- Enter product number - Choose OS - Select BIOS - Download and install. Make sure that the Charger is connected to the Computer.

Satellite C650 sound has stopped working

I've had my laptop for about 6months and have had no problems with the sound until now.
I have recently done a windows update and a few hours after my sound has stopped working completely.
I have updated the driver (Conexant Cx20671 smart audio hd) after that failed i un-installed and reinstalled the driver off the toshiba downloads, after restarting again no sound.
When i have media player on, the sound mixer recognizes there is something playing but there is no sound coming out the speakers
_*please can someone help!!!*_

Ok, this means that the sound driver is OK.
Please go to the control panel -> sound -> Playback tab
Here you have to check if the speakers are set as default device.
Furthermore mark the speakers and click on settings button.
There you can also check the volume level.

The sound on my laptop has stopped working entirely, with and without headphones. What should I do?

The sound on my computer has stopped working. I have searched through countles google entries to try and figure out the problem but I can't find anything remotely useful. I never spilled any liquid or anything on my computer. I was just searching through youtube and when I clicked a video there was no sound. Then I checked iTunes and tried to play some music, still no sound. I played around with the preferences and volume control, still no sound. If you have any advice please help. Going to the apple store is so expensive and I don't have the time or money.

Did you try resetting PRAM and SMC?
Is there any red light visible in the headphone port?

How fix "Adobe Photoshop CS6 has stopped working" error in Win7?

Hi All,
I’m getting the following error message when ever I try to use Move Tool and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Video card driver is updated.
Please see the following error event.
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
Faulting module name: aticfx64.dll, version: 8.17.10.1047, time stamp: 0x4cabd6c0
Exception code: 0xc0000005
Fault offset: 0x000000000002f5bf
Faulting process id: 0x15ac
Faulting application start time: 0x01ce2110508d2fb6
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Windows\system32\aticfx64.dll
Report Id: fe57fe44-8d03-11e2-bd6c-dc0ea14b01df
Please advise what is the problem? and How to sort this out
Your help is highly appreciated.
regards

that's the details it shows.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2527 MHz
Built-in memory: 3891 MB
Free memory: 1350 MB
Memory available to Photoshop: 3306 MB
Memory used by Photoshop: 5 %
Image tile size: 128K
Image cache levels: 4
Photoshop crashed on 15/03/2013 at 00:05:05 (GetImageViewResourceSharingGLContext)
The GPU Sniffer crashed on 15/03/2013 at 00:50:52
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
No video card detected
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Khan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 298.1G, 254.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Sumi-e 13.0
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

CS3: Error "Licensing has stopped working" | Mac OS with Lion Upgrade

Hi:
My trusty Adobe Photoshop CS3 has quit working with the upgrade to Lion on my Intel iMac.
Specifically, when I try and launch it now I get "Licensing for this product has stopped working. You cannot use this product at this time. You must repair the problem ..."
I went to this site for advice: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
I followed Solution 1: Delete the FlexNet Publisher preferences folder
It didn't work.
Now I'm trying Solution 2: Run the License Repair Tool
I get to step 5g and type:
sudo python /Volumes/LicenseRecovery\ 11.6.1/LicenseRecovery/LicenseRecoveryLauncher.app
I enter my PW.
Then I consistently get an error that reads:
File "/Volumes/LicenseRecovery 11.6.1/LicenseRecovery/LicenseRecoveryLauncher.app", line 1
SyntaxError: Non-ASCII character '\xfe' in file /Volumes/LicenseRecovery 11.6.1/LicenseRecovery/LicenseRecoveryLauncher.app on line 1, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details
Can anyone help? Thank you very much!

This worked for me (Mac OS) :
1) you should have opened the LicenceRecovery111.dmg file and you should see in the LicenseRecovery directory a file named LicenseRecover.py
2) clic on the right of the mouse, do a copy of the LicenseRecover.py and renamed it at the end .pyOld
3) find in your Mac in the applications the Smultron.app editor (you may need to use a text editor that keeps encoding of the file when it read and save it, Smultron seems to do that), launch Smultron
4) in Smultron do menu : file - open and find, in the LicenceRecovery directory, the file named LicenseRecover.py chose it to open it.
In the options, I did not have to chose, because the default encoding (Occidental Mac OS Roman) worked for me (with menus in english then), but I think you may chose in the option when you open the file the coding : UTF-8
4) the first line in the LicenseRecover.py file was
# encoding: utf-8
. replace it by
# --*-- coding: utf-8 --*--
. save the file
5) try to re-execute the process as mentionned (sudo python ...)

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. Any ideas?

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. It finds some things, but is not to be depended upon. Any ideas?

Try reindexing spotlight: Spotlight: How to re-index folders or volumes - Apple Support
If you still have problems, open Console app, select All Messages, then search for mds in the search field. Then search for mdworker. See if there are any messages indicating it is having problems with certain files.
You can also delete the index altogether and cause it to reindex with a command in Terminal. I have always assumed the method above will do the same, but I'm not certain. You must run this command while logged into an admin account. Copy the whole line and paste it into Terminal.
sudo mdutil -E /
sudo temporarily elevates your privileges and will ask for your password. When you type it in, there won't be any response in the Terminal. Just type it and hit return.

Intel Bluetooth Service View has stopped working

I have a Windows 7 laptop model dv4t-4000 CTO Entertainment Notebook PC (product number LH989AV) and I get this error message ("Intel Bluetooth Service View has stopped working") every time I try to connect to my Bluetooth Earbuds. The pairing seems to work fine, but there is NO SOUND in the earbuds, the sound continues to play from my PC speakers instead. Can anyone help? Please tell me how to fix this error message "Intel Bluetooth Service View has stopped working." Thank you!!!

Hello CathyJo
I am sorry to hear you are having issues with your Bluetooth not working. I would like to offer my assistance in this matter. I would recommend that you try the steps I have outlined below"
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link"
If the above steps do not work I would recommend you read this thread concerning this issue on the Intel Forums.
I hope I have been able to provide you with the assistance you need. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My time capsule has stopped working.

My time capsule has stopped working. I get following error message The backup disk image “/Volumes/Michael Campbell's Time Cap/iMac.sparsebundle” could not be accessed (error -1). I tried everything including deleting all the data and starting again. It then works for a few back ups and then gives the error message. I have tried to repair the disk but that is grayed out.

Found this elsewhere so I will try it
Go to App folder
Open Utilities
Click on AirPort Utility
Highlight your Time Capsule
Go to Manual Setup
Click on Disks
Highlight your Time Capsule
Click on Disconnect All Users
Close AirPort Utility
Go to Systems Preferences
Click on Time Machine
Click on Select Disk
Find your Time Capsule and highlight it
Then click on USE BACKUP DISK.
Go to the Menu Bar and click on the Time Machine Icon
Click on Backup Now
It should work

Licensing has stopped working error durinng launch of Photoshop CS3

I cannot get rid of this error message during launch of PS CS3. I tried uninstalling running the CS3MacClean Script, reinstalling, ... same problem. The same installer and serial number works fine on a clean system so I know there must be a file or two that the cleanup script doesn't remove.
Anybody know what files to delete?

After installation, a system upgrade, machine migration, backup restore, or some other system event(s), trying to launch Adobe applications on Mac OS X results in the error "Licensing for this product has stopped working." You may see error numbers after this message, such as "150:30".
Solutions
Do one or more of the following solutions. Note, Adobe Trial Software that displays the error can not be restored to run.
Solution 1: Run the License Repair Tool
Close any Adobe applications.
Download the License Repair Tool:
www.adobe.com/support/contact/licensing.html
Run the License Service Update.
1. Double click the LicenseRecovery111.dmg
2. Double click the LicenseRecoveryLauncher.app.
3. Enter your administrator username and password when prompted and click OK.
4. Follow the on-screen instructions.
Start your Adobe application(s).
Important: The patch applies to Creative Suite 3 or 4 products, Acrobat 8 or 9, Photoshop Elements 6 or 8, Director and Technical Communication Suite. If your issue was not resolved on the first attempt, run the patch again and enter option 0, when prompted to do so.
Solution 2: Delete the FLEXnet Publisher preferences folder
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Quit all Adobe applications.
On your startup disk, locate and rename, or copy to the desktop and then delete, the following folder:
/Library/Preferences/FLEXnet Publisher/
Start your Adobe application(s).
Solution 3: Repair Disk Permissions
Launch the Apple Disk Utility:
/Applications/Utilities/Disk Utility.app
Select your startup disk.
Click Repair Disk Permissions.
Note: This can take considerable time. For more information about using Disk Utility, consult Apple's website.
Start your Adobe application(s).
Solution 4: Reset your permissions on the FLEXnet Publisher licensing service folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/FLEXnet Publisher/
Solution 5: Reset your permissions on the Adobe PCD folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/Adobe/Adobe PCD/
Permissions Instructions:
Close out of all Adobe applications. Follow the directions below to modify permissions to the folder.
Note: This solution requires administrative privileges on your computer. You will need to provide administrative credentials.
On Mac OS X 10.4
Using Finder, navigate to the folder to be modified.
Control+Click the folder, and then select Get Info.
Expand the Ownership & Permissions section.
Click the Details option to show the various owner and group options.
Verify that you have Read & Write permissions.
Click the lock icon next to the Owner field, choose yourself as the Owner, type in your administrator username and password when prompted, and click OK.
Change the Owner to system.
Change the Permission to Read & Write for Owner.
Click Apply To Enclosed Items and click OK to the warning dialog.
Type in your administrator username and password when prompted and click OK.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
On Mac OS X 10.5
Using Finder, navigate to the folder to be modified.
Control+Click on the folder, and then select Get Info.
Expand the Sharing & Permissions section.
Click on the Details option to show the various owner and group options.
Click the lock icon in the lower right corner. Type in your administrator username and password when prompted and click OK.
Change your username to have Read & Write permissions.
Change admin to have Read & Write permissions.
Change Everyone to have Read & Write permissions.
Click the Gear icon and select Apply To Enclosed Item.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 6: Remove the SQLite journaling file.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
The journaling file exists only under specific circumstances where a client is accessing the database file with certain options enabled. If the file does not exist, continue to the next solution.
Using Finder, navigate to:
/Library/Application Support/Adobe/Adobe PCD/cache
If present, delete cache.db-journal.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 7: (Acrobat 9 only) Reinstall on a non-case-sensitive file system.
Adobe applications are not supported on an OS formatted with a case-sensitive file system. If you attempt to install an Adobe application on a case sensitive volume such as a UFS, HFS+ case sensitive (HFSX) or SMB formatted drive, you get an error that the file system of the setup drive is not supported. Only Acrobat 9 doesn't display such error message and allows you to install the application, but attempting to launch Acrobat 9 results in the error "Licensing for this product has stopped working (error code 130:9)." The drive needs to be reformatted to a non-case-sensitive file system.
To check if MAC OS X is formatted with a case-sensitive file system :
From the Apple menu select About this Mac.
Click More Info and under Hardware select Serial-ATA.
Select the drive Acrobat 9 has been installed on and check the file system in the list. Note if the file system is case sensitive.
Alternatively, use the Disk Utility to check the file system:
From Applications > Utilities, launch the Disk Utility
Select the disk Acrobat is installed on and check its format.
Solution 8: Contact Adobe Technical Support
Adobe Technical Support can obtain logs from your machine to determine additional information about the failure. Contact Adobe Technical Support if the information provided has not helped to resolve your issue.
Additional Information
The Flexnet folders/files required to run Adobe applications can get corrupted, or have permission settings problems, if moved from one machine to another, or through a system restore from Time Machine. Flexnet service licensing failures can't be resolved by re-installating the appliaction, nor will the Adobe CS3 or CS4 Clean Scripts solve this problem. If permissions issues prevented the FLEXnet licensing service from launching, accessing its data, or communicating with Adobe processes, the licensing failure is expected.

I have updated with os X 10.10.2 and my built in microphone has stopped working. need immediate solution for this.

Currently I own 13.5" Macbook Air (mid 2012) with OS X 10.10.2 running on it. Ever since I upgraded to it, the built-in microphone has stopped working.
I made Facetime calls but my voice was not able to transfer/hear on the other side. Moreover i tried checking the "Sound Input levels" in the System Preferences and they all are perfect. When i speak the volume recognition bars does not show any movement or change, indicating no Input Volume.
Kindly look into this matter and take necessary steps to resolve this issue.

To add to David Woods comment, make sure your Audio MIDI app is running the latest 4.3.0 found in Audio MIDI>Preferences> info>Core Audio Framework 4,3.0

Earbud volume has stopped working

Similar Messages

Maybe you are looking for