Earlier iPhoto Edit, changes Lens Type in Aperture 3

I imported photos from my camera (Canon 7D) into iPhoto, then edited some of them using the Enhance tool (just being lazy). But I wanted to do some other work on the shoot, so I imported the photos from iPhoto into Aperture. The pattern I'm seeing with those shots Edited in iPhoto, is the lens type is changed in the metadata. While I don't own a EF 50 mm L f1.0 lens.. it shows as the lens type. Otherwise there seems to be no other changes. Any ideas about what is going wrong. Please note that different photos (those edited in iPhoto), show different lenses... while every shot was taken that set, was done with a EF70-300mm f/4.5-5.6 DO IS USM Lens.

In a word, no.
Aperture and iPhoto are entirely different applications that work in very different ways.
The only communication between the two is as follows:
Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
Aperture can share its Previews with the iLife apps, including iPhoto.
That's it.
So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
Regards
TD

Similar Messages

How to edit/change data type on report that was selected by mistake

Hello there
I created a report in APEX and one column is giving error because the data type of one column supposed to be a varchar2 but somehow the report was created with a Date data type. I want to change the data type without recreating the whote report. Can someone help? I tried to edit the report but couldn't be able to figure out.
HELP....

I found a solution for this, thank you.

Aperture Loses iPhoto Edited Images

Hello,
I need help on importing iPhoto libraries.
I have 22 iPhoto libraries (iPhoto 8.1.2, 140GB total for all libraries) on an iMac 27, OS 10.6.8, and am importing into Aperture 3.2.2. I imported each iPhoto library separately and rebuilt their thumbnails before each import. It was my understanding that Aperture would import the original iPhoto images as well as the edited images along with metadata. Now I have discovered that in my case it does this sometimes but not always. When it does work Aperture shows two images in a stack, the iPhoto edited image (with the keywords "iPhoto Edited" added, and the iPhoto original image (with the keywords "iPhoto Original" added). This is what I would expect. However, there are many images that I edited in iPhoto that show up in Aperture as just a image, the one that was edited in iPhoto. The iPhoto original image is not there. Aperture has added the keywords "iPhoto Converted" (whatever that means) and "iPhoto Original" (which it is not) to this photo. If I go back to these images in iPhoto and do a revert to original, iPhoto reverts the edit back to the (true) original image. So,both the original and edited images are in iPhoto.
I have rebooted the Mac and repaired permissions but that didn't help.
Getting my Aperture library setup has been a struggle and I appreciate all the help I have gotten. It looks like I still need more. Thanks!
Mike

Hello Leonie,
You were right on - many thanks! I thought I was facing having to start over again.
I have found Apple's Aperture User's Guide very useful but nowhere in its 907 pages have I found your instructions described or "iPhoto Converted" defined.
It works as you described and I have some comments: (1) After the resetting all adjustments in Aperture the new version continues to have these same keyword tags as before the reset. The adjustment badge is gone and the version number is appended to the image name. (2) I also used "New Version from Master" on some iPhoto edited photos. This creates a new version; however, all the adjustments, keywords and badges were deleted, but the version number is appended to the name. (3) I tried "Show Master Image". This apparently only works in Split View & Viewer (dimmed out in Browser). When I do this the adjustments are apparently not changed except for crops which are removed (this seems odd). Keywords and badges are not changed. There is no version number, of course, and the image is identified as a master image. (4) I am curious about why using Aperture's iPhoto Browser to import photos results in two photos, the iPhoto original and the iPhoto edited. They have the appropriate iPhoto Edited or iPhoto Original tags; however, except for rotation and cropping the iPhoto adjustments appear to have been reset. The edited ones do not have an adjustment badge, even though it was adjusted in iPhoto. All the images have a keyword badge and Aperture has added a keyword which it the title of the iPhoto album or event the photo came from. They all have a Master Image label at the top. I duplicated one of the iPhoto edited images. The duplicate displayed a Master Image label and Reset All Adjustment was dimmed.
I would appreciate your observations on these comments.
Aperture is an impressive piece of software and thanks to your help I think I am finally ready to start using it!
Mike

On MacBook Pro, in iPhoto, I can't find the "DON In MacBook Pro where do I find the "DONE" button to save my editing changes and revert back to my library.

In MacBook Pro, where is the "DONE" button to save my editing changes and revert back to the iphoto library?

If you're using the Adjust editing pane there is no Done button. When you done with the editing just click on the Photos button at the top or use one of the arrows at the top to advance to the next photo. No done button required.
OT

Aperture 2 no longer supports iPhoto "edit in external editor"

I've ordered Aperture 2.0, but I'm still using the demo.
iPhoto 2008 Help says I can use Aperture as an external editor.
I just tried. Aperture opens, but the image does not appear.
I suspect this functionality broke in either Aperture or iPhoto.
Anyone else test this? I'll probably submit a bug report for iPhoto on this.

Terence Devlin wrote:
Aperture has never worked as an external editor for iPhoto, and I could not see anywhere in the iPhoto help where it says it does.
Here's the text from the Help file (emphasis mine):
"Choosing what happens when you click the Edit button
When you want to edit a photo, you can have the photo open in one of four ways: in the same window, in a separate window, in full-screen view, or in another application..
Under Edit Photo, select one of the following options:
In main window: Opens the photo in edit view in the main viewing area.
In separate window: Opens the photo in edit view in a separate window.
Using full screen: Opens the photo in full-screen edit view.
In application: Opens the photo in another application you choose, such as Aperture or Photoshop."
Anyway, thanks for confirming that it really doesn't work now. Probably it never did, there was just an error in the documentation.

IPhoto not saving editing changes:

I am attempting to edit changes in my IPHOTO library and notice that it's not saving everything that I want. It is making some changes i.e. brightness/contract, however sharpness and other editing options are NOT being saved. Very odd, I am wondering if IPHOTO 6 has fixed this problem? It appears others are having this problems with issue as well and no there does not appear to be any concrete answers. Any help would be appreciated! Thank you!

Hello, Phez,
It may be that iPhoto's preference file has been damaged. Delete it and see if that corrects the problem. iPhoto will create a new one when it determines that the old one is gone.
Go to YourUserName->Library->Preferences->com.apple.iPhoto.plist and delete that plist.
Also, you should always repair permissions before and after any installations/upgrades. Applications->Utilities->Disk Utility. Select your hard drive's icon by its name, then be sure you are in 'First Aid' and choose 'Repair Disk Permissions."

Any value in exporting iPhoto pictures and importing them into Aperture?

I am moving from iPhoto into Aperture (moving my library again actually) and I know that iPhoto and Aperture can share the iPhoto library once it has been updated but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library? The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original. A couple of weeks ago I moved my iPhoto library onto an external LaCie SSD disk to use with my MacBook Pro but unfortunately corrupted that library and have to make the move again. If there is any value in changing how I'm managing my library I should do it now.
The library corruption was caused by me needing to leave for work and disconnecting the LaCie before Aperture was done sync'ing with my Flickr account. When I tried to use Aperture the next day it was not able to repair/rebuild or use the iPhoto library at all. I was unfortunately not backing up the external disk so I lost everything that I had done to clean up the library after the move. One lesson that I learned was do not automatically sync with Flickr because doing this on an MBP via wireless with an external disk library can add a lot of delay to shutting down Aperture after an MBP wakeup.

Just in case you have not come across these:
Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Aperture 3.3: How to use Aperture to merge iPhoto libraries
but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library?
You can - an it will depend on what you want to achieve, if that will usefull. The way to do this would be by imprting your iPhoto library into an Aperture library using Aperture. But Aperture libraries and iPhoto libraries are now interchangable - both are photo libraries, and you could simply use your iPhoto library in Aperture and be done now.
Some reasons why you would want to turn your iPhoto library into a library recognized as Aperture library by importing it into a new, empty Aperture Library:
As long as the photo library will have the "Kind: iPhoto library", you will have to upgrade both iPhoto and Aperture always to the newest versions, or you will not be able to upgrade to a new library format, when a new release of Aperture comes - say (iPhoto '12 and Aperture 4); you will probably have to buy both new releases to continue working with your iPhoto Library in Aperture.
If the kind of your library is "Kind: iPhoto library", it will appear in the Media Browser in the iPhoto section, not in the Aperture section, even if you are using it as your Aperture library. And before syncing with iTunes you will always have to open the Aperture library in iPhoto to point iTunes to it.
Also, in Aperture you have more control about what will be included in your library - In iPhoto there is no way to specify the size and quality of previews. If you do not want or need previews, or you want smaller previews, or no Faces, it would make sense to recreate your iPhoto library by importing it into a new, empty Aperture Library.
If you have more than one iPhoto Library, you can merge them into one big Aperture library to be able to browse all your images without having to switch between libraries. Aperture works very well with really big libraries. There is no need to split libraries.
The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original.
That is what I meant by having more control on what will be stored. iPhoto will always store a very high quality preview of your edited version; in Aperture you can decide what the preview size and quality will be. But Previews and originals are not duplicates; they are not the same image.
Regards
Léonie

Can I open iPhoto 7.1.5 library with aperture 3.4.3?

Can I open iPhoto 7.1.5 library with aperture 3.4.3?

Is there any other workaround, such as exporting my iPhoto 7.1.5 library to some other format and then importing such format to Aperture 3.4.3? I will be grateful for any help with this odd situation.
How many photos are you talking about? If you have huge iPhoto Libraries, and have invested much work into organizing and adjusting your photos, you really will want to import your iPhoto library as Library. This way you will transfer your work, not only your photos.
If your library is small, and you do not mind to do all the organisation and adjusting again, you can export your photos from iPhoto 7 - create a folder in your "Pictures" folder and export your photos from iPhoto to this folder, one event at a time as separate folders of image files. You can either export the original images or the edited versions. If you have done much editing, export both, to save your originals. Then import these folders of image files into your Aperture library.
But if you have huge libraries to transfer and many years of editing to preserve, the sensible thing to do would be to invest into iPhoto 9.4.3 and to upgrade your iPhoto libraries to the new unified format. You will not only save your edits and library organisation, you will also save plenty of disk space, for you can import the edited versions and originals as master-version pairs and not have to deal with duplicates.
When did you buy Aperture? Do you have a serial key for Aperture, that can be used with the Aperture Trial version? Then you might consider to reinstall Aperture 3.2.4 from your backup (rename your current Aperture version while you are doing that) or to download the Trial and try to import your iPhoto library into a new Aperture library. Earlier Aperture versions could import older iPhoto libraries, but will import two image files (Version and original) for each iPhoto image. So you will end up with plenty of duplicate images that you will have to organize. (A link to the Trial is here: Aperture 3.4: May quit unexpectedly on launch after updating).
As I said - to invest into iPhoto '11 will have a lot of advantages.
Regards
Léonie
11940

In ALV Report ,a field to allow the user EDIT/CHANGE

Hi Guys,
My requirement is
in the ALV Grid display iam having 10 fields.5th field should be allow the user EDIT/CHANGE mode.
what ever he enters the value the same should be updated to an custom table.
EX.
o/p:
0001 0002 0003 0004 0005 0006 0007 0008 0009 0010
Now the user changed the value 0005 to 0011.
0001 0002 0003 0004 0011 0006 0007 0008 0009 0010
now 0011 should be updated in custom table.
to do this process please suggest a best way for coding.
thanks in advance.
Sunil.

hi
*& Report ZTESTDEMO_INTERACTIVE_LIST_2
REPORT ZTESTDEMO_INTERACTIVE_LIST_2.
TABLES: MARA,MARC,MARD.
* internal table itab_mara 3 fields matnr, ernam,mtart
DATA: BEGIN OF ITAB_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, " material number
ERNAM LIKE MARA-ERNAM, " name of person who create
MTART LIKE MARA-MTART, " Material Type
END OF ITAB_MARA.
* internal table itab_marc 3 fields matnr, werks,lvorm
DATA: BEGIN OF ITAB_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS, " Plant
LVORM LIKE MARC-LVORM, " Flag Material for Deletion at Plant Level
END OF ITAB_MARC.
* internal table itab_mard 2 fields
DATA: BEGIN OF ITAB_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT, " Storage Location
END OF ITAB_MARD.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
INITIALIZATION.
S_MTART-LOW = 'HALB'.
S_MTART-HIGH = 'HAWA'.
S_MTART-OPTION = 'BT'.
APPEND S_MTART.
START-OF-SELECTION.
SELECT MATNR ERNAM MTART FROM MARA INTO TABLE ITAB_MARA WHERE MTART IN
S_MTART.
PERFORM DISPLAY.
TOP-OF-PAGE.
WRITE:/2(15) 'MATERIAL NO',20(20) 'CREATED BY',45(15) 'MATERIAL TYPE'.
FORM DISPLAY.
LOOP AT ITAB_MARA.
WRITE:/ ITAB_MARA-MATNR UNDER 'MATERIAL NO' HOTSPOT ON,ITAB_MARA-ERNAM
UNDER 'CREATED BY',ITAB_MARA-MTART UNDER 'MATERIAL TYPE'.
HIDE: ITAB_MARA-MATNR.
ENDLOOP.
ENDFORM.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
SELECT MATNR WERKS LVORM FROM MARC INTO TABLE ITAB_MARC WHERE MATNR =
ITAB_MARA-MATNR.
PERFORM DISPLAY1.
WHEN 2.
SELECT MATNR LGORT FROM MARD INTO TABLE ITAB_MARD WHERE MATNR =
ITAB_MARC-MATNR.
PERFORM DISPLAY2.
when 3.
sy-lsind = 0.
ENDCASE.
FORM DISPLAY1.
LOOP AT ITAB_MARC.
WRITE:/ ITAB_MARC-MATNR HOTSPOT ON, ITAB_MARC-WERKS,ITAB_MARC-LVORM.
HIDE: ITAB_MARC-MATNR.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
FORM DISPLAY2.
LOOP AT ITAB_MARD.
WRITE:/ ITAB_MARD-MATNR, ITAB_MARD-LGORT.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
regards
ravish
<b>plz dont forget to reward points if helpful</b>

IPhoto asks for an upgrade of Aperture and otherwise won't open

After upgrade to Maverick, iPhoto asks for an upgrade of Aperture (which I don't have and never had), and otherwise won't open. If I click "ok", the Applications store opens and asks me to BUY Aperture (69,99 EUR).
There must be a bug in iPhoto 11 after the upgrade to Maverick..?

I can only guess at a couple of solutions:
#1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
#2
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.

HT1296 I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. How can I fix this?

I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar data transfer is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. The birthday entries in my Outlook contacts have correct dates.How can I fix this?

The following peocess corrects the calendar entry:
edit the contact & change the birthday, save the change; edit the contact & change the birthday to the correct value, save the change again. The calendar entry then displays on the correct date. Alternatively as a temp solution I can just de-select the "birthdays" calendar which stops the icon being displayed.
Thanks for your advice, I think that it's n going to be a slow process to fix all the entries for not much return.

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Changing data types of fields in structures

Hello,
   Currently we are working for upgrade to ECC 6.0 .
   In some transactions we are using BAPI_MATERIAL_SAVEDATA to create material.
We have some additional fields in MARA and MARC table , which we fill using BAPI_TE_MARA and BAPI_TE_MARC structures.
    In these structures we have different data types for fields earlier in 4.6C
Now this function module is only working if we change data types of fields in these structures only to char type. It is going for dump , if we maintain any other data type.
Could any body tell me why should we change for char data type ?
Regards,
SATYA

Hi,
Check enhancement category (Extras --> Enhancement Category) for structures before enhancement. For example, for BAPI_TE_MARA structure, enhancement category is given as character type or numeric type. That means you can add the fields of data type only C and N. No other data types are allowed. If you select as not classified then you can add any data type. This option plays important role while enhancement.
Regards,
Prasanth

How to change data type of content type column.

Hi all,
I am having one content type. I have 10 columns in it. There are two rich text columns in my content type. I have attached this content type to pages library. I want to change the data type of this rich text column to "Full
HTML content with formatting and constraints for publishing".
Please assist me with this issue.
amol

Hi,
From your description, my understanding is that you want to change the data type for rich text column in content type.
The field type of Full HTML content with formatting and constraints for publishing is "Invalid", you could refer to this article:https://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spfieldtype.aspx.
You also could test it by create a Full HTML content with formatting and constraints for publishing column and get the its type with C# code below:
//change the URL to your SharePoint site
using (SPSite site = new SPSite("http://sp/sites/sharepoint2013"))
using (SPWeb web = site.OpenWeb())
SPFieldType type = web.Fields["Column name"].Type;
I have tested it with the PowerShell, it cannot hange the rich text column to “Full HTML content with formatting and constraints for publishing” column. If you want to edit the rich text column, you could not change the type of the column as the screenshot
below:
As a workaround, you could follow these steps to accomplish your requirement:
Create a “Full HTML content with formatting and constraints for publishing” type column in the content type.
Enter your site columns by clicking gear icon -> Site Settings -> Site columns under Web Designer Galleries under section.
Find and delete the rich text column you want to change.
Find the column you have created in step 1, and change the column’s name to the name of the text column you have deleted in step 3.
But you will lose the data of the rich text column in pages library with this method.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to change stock type of GR in BAPI_REPMANCONF1_CREATE_MTS

Dear All,
We faced a problem at confirmation in repetitive manufacturing. Actually we would like the goods-receipt(GR) to be posted to quality or blocked stock. If we use the transaction MFBF, there is an option where we can set it. The menu path is Edit->Change detailed settings. There is the stock type. The material document has been posted correctly as it is expected. But when we want to post the confirmation through BAPI_REPMANCONF1_CREATE_MTS, I did not find any option to enter the stock type. I also looked for some solution on the internet, but so far I have found nothing. Does any of you have any experience or idea how to solve this issue?
Thank you in advance!
Rgds,
Viktor Bojtos
Hungary
Edited by: viktorbojtos on Sep 10, 2010 5:49 PM

Dear All,
The promlem has been solved by myself. In user-exit XMRM0001 (EXIT_SAPLBARM_001) we have the chance to set the stock type. There is an import strucutre I_RM61B which is created based on strucutre RM61B. If we enhance the structure RM61B with additional field (ex. ZZINSMK) we can pass the relevant value to the user-exit trough this structure, because it is available in the BAPI as import parameter.
Rgds,
Viktor Bojtos
Hungary

Earlier iPhoto Edit, changes Lens Type in Aperture 3

Similar Messages

Maybe you are looking for