Earllywatchreport - Solution Manager Diagnostics Configuration

Hi gurus,
under "4.3 solutionmanager configuration", i got::
The number of Background Work processes for BI could not be checked from 'ABAP Host=xxx, old invalid hostname - source of systemcopy. Please advise, which setting is to update to avoid this message ?
Thanks a lot in advance
Thomas

Hi Thomas,
Try the following:
1. Check the if password is correct in Visual Admin Tool -> JCO RFC Provider then the Webadmin one.
2. Check the user definition for BI-user and BI-Admin referring to the following documentation.
https://service.sap.com/diagnostics
-> 'User Administration Guide'
-> Chapter 2.3.5 and 2.3.6
After correcting 1 and 2, please run the 'Managed System Configuration' for the managed system.
Regards,
Allam

Similar Messages

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

Solution landscape doesn't appear in Solution Manager Diagnostics

Dear all,
I have configured 6 Solution Landscapes in transaction solution_manager. One for ECC5, one for PI 7.0, one for BI 7.0, one for Solution Manager 7.0, one for SRM 4.0 and finally one for NW 04 Portal.
When I go to my Solution Manager Diagnostics URL
https://solman.domain.com:50001/smd and I do Diagnostics Setup --> Managed Systems --> Setup Wizard, I see there all the Solution Landscapes I have configured except for the NW 04 Portal one. Any ideas why I can not see this landscape? I am trying to think if I have missed any configuration but I can not think of something
Many thanks
Andreas

Sad to say, Vista isn't a supported system for Acrobat XI.

Solution Manager Diagnostics - Installation

I have installed SM EHP1 and have also installed SMD. However during the Basic configuration of SM, I'm getting Diagnostics Configuration errors during the Automatic Configuration phase of the Diagnostics configuration. The errors showing up are:
1. Cannot call Diagnostics Setup web service
2. Web Service URL: http://atl-osm-01.oversightsystems.com:8100/DiagSetupServices/Di...
3. SOAP:1.007 SRT: Unsupported xstream found: ("HTTP Code 404 : Not Found")
4. Error when processing Web service call
5. Error when calling SOAP Runtime functions: SRT: Unsupported xstream found: ("HTTP Code 404 : Not Found")
What am I missing here?
Thanks for the help.

Hello Hans.
Have you solved the problem? We have a similar problem with Solution Manager 7.0 EHP1 SP27.
Errormessage (parts are in German):
Web Service URL: http://solman.company.com:8100/DiagSetupServices/DiagSetupConfig?style=document
Cannot call Diagnostics Setup web service
SOAP:1.007 SRT: Unsupported xstream found: ("HTTP Code 404 : Not found")
Beim Prozessieren eines Web Service-Aufrufs ist ein Fehler aufgetreten.
Fehler beim Aufruf von Funktionen der SOAP Runtime: SRT: Unsupported xstream found: ("HTTP Code 404 : Not found")
Note: We have changed the http and https-Ports of ICM. Solution Manager is working fine, but Solution Manager Diagnostics Setup does not work.
Thank you for a hint.
Best regards,
Tobias

How to stop SAP Solution Manager Diagnostics instance?

Dear community.
I've got a question. We are working on solman 4.0 with installed SMD (Solution Manager Diagnostics). For this tool is runnig an separated java instance on our server. The problem is, that we don't need the SMD, becaucse we have no JAVA systems to monitor. Is it possible to stop the SMD instance? If yes, how can I do it?
Many thanks in advance...
Michael

Solution manager itself has a java stack so are you saying you don't monitor solution manager java side of things?
SMD does both ABAP and Java application monitoring with varying levels of details, interactions, reporting etc so disabling SMD, to me, defeats the whole purpose of having Solution Manager 4
SAP wants customers to use this tool as best practice and guidelines suggest
On the other hand what advantage do you have of stopping this instance? It would still be sitting in your landscape taking up resources and should you come to use things like SLD and other java applications which I believe will be sooner than later you will have to setup/configure SMD again.
SAP best practice is to have a single SLD and this will definitely be monitored using SMD

Solution manager diagnostics

Hello.
I have installed SMD agent in a monitored system in order to obtain EWA non-ABAP from this system.
I go to http://<host>:<port>/smd and the agent is running. I go to setup wizard for this managed system and the result is ok, all the semaphores are green.
The problem is that, when i try to do the other task, the solution manager diagnostics don't recognize the setup done.
I receive this message : -No setup or configuration steps performed yet-
I,ve followed the note 1014999 but the result is not ok.
I don't know what step i'm missing, so if someone has got an answer, please, tell me, because i've tried lot of things and i don't know how can i continue.
Thanks a lot.
Best regards

Hello.
Yes, I have run setup wizard for solution diagnostics first and run the upgrader etc...
Now SAP is connected to the system in order to solve the problem as well as we continue our investigations. I you've got more ideas, please, tell us.
Thanks a lot.
Best regards

Solution Manager Diagnostics don't display data

Hi,
I'm setting up Solution Manager Diagnostics at Solution Manager SP 22. I've installed Wily Introscope Enterpise Manager at Solution Manager Server, and Wily Introscope Agents at Solution Manager and Satellite systems as well.
Wily Introscope is working properly, I receive statistics from all agents, and also I can see most of the graphics. BUT, after I install SMD Agent, I can't receive any data in Root Cause Analysis Workcenter -> End-To-End Analysis -> system -> Workload Analysis.
Here I can see a plot with all values at 0. If I try Enterprise Portal tab -> Portal Activity Reporting, I don't have any data.
At Aplication Server Java tab -> J2EE Engine, I only can see forms like:
     E2E CV PPMS ID Variable
     E2E Installation Number Variable
     E2E SID Variable       <SID>         <SID>
     E2E Metric Type Variable(multiple values)
               SERVLETS
               WEB DYNPRO APPLICATI ONS
               JCO CALLS
              SQL STATEMENTS
InfoProvider
              0SMD_PE2H
              0SMD_PERH
But if I execute or check this form, I receive this message:
Value "SERVLETS" for variable "E2E Metric Type Variable(multiple values)" is invalid.
I've also followed SAPNote 1435043 - E2E Workload Analysis - No applicable data found, and checked prerequisites, RFC's, Jobs, Extractors and executed SOLMAN_SETUP transaction.
I've followed all guides I've found for Diagnostics, but I don't know how can I solve this.
Please, could you help me?
Thanks in advance and regards.
Tomas.

Hi Tomas,
I have exactly the same problem, I am on Solman SPS22, LMSERVICE SP06 patch2.
and the satellite system pre-requisites and definition in SMSY are correct, also the MDX PARSER RFC is wrking fine.
any idea on why is the Portal activity reporing is blank, while i get data under all the other tabs.
Also, the agent application .log file shows the below warning
"PadcService@1cbd1cbd: file portalActivity_6057051_1278074505498.txt could not be deleted"
but i could not find the file in the satellite system.
Regards,
kaustubh.
Edited by: Kaustubh Krishna on Jul 12, 2010 11:21 AM

Sap solution manager optimizer configuration error

Dear Receipient
I have installed solution manager 4.0, patch is updated upto the level of optimizer configuration. I have configured sap router on the same solution manager machine.
now i am in solution manager optimizer configuration in that i am doing it with an user of having sap_all rights
in t code sm59 -> sap-oss connection test is good
now through t code solution_manager i have created an new active solution of sandbox land scape and through t code smsy i have created an logical component of sap ecc and i have added the user basis which iam using for soman optimizer configuration thru t code aisuser
but now if i go to t code solution_manager if i click on sandbox landscape -> change management -> support packs -> then click on maintenance optimizer it shows as no system
and also in product version also no available its showing
i dont know where i went wrong in my solman optimizer configuration
pls help me
regards
senthil

Hi,
Please follow the SAP Tutor to setup maintenance optimizer:
http://service.sap.com/solman-mopz
-> "SAP Tutor on Maintenance Optimizer " under the section
"Additional information on Maintenance Optimizer"
Best regards,
Warren

Solution Manager Diagnostics: Agent Architecture

Hi there,
current I write a degree dissertation about Solution Manager Diagnostics. In different books, documentations and manuals I read about Agents which must be installed on the managed system. But I find no exactly description about the agents architecture. In a book about the Solution Manager is written, that the structure includes two tiers. The first tier are the core agents, but there is nothing explained about the second tier ... Is a core agent the same like a host agent?
Can anybody explain me (exactly) the differnt functions of the agents (core, host, diagnostics, wily-agent)?? Or maybe some links will be helpful.
Thanks and best regards,
Andreas

> Can anybody explain me (exactly) the differnt functions of the agents (core, host, diagnostics, wily-agent)?? Or maybe some links will be helpful.
I would start with
http://service.sap.com/diagnostics
There are lots of (detailed) documentations available.
Markus

Solution Manager Diagnostics Self Check Error with Enterprise Manager

I'm trying to get the Solution Manager Self Diagnostics Self Check running,
but I'm always getting the follwing Error:
The Enterprise Manager on host 'hdeas81' and port '6443' cannot be reached.
The Log File of the Introscope Manager shows the following line:
6/29/09 01:15:36 PM CEST [INFO] [Manager.PostOfficeHub] Server listening for incoming ssl socket connections on port 6443
Netstat -a is also showing that Port 6443 is open and Listening.
The Port is also reachable via telnet.
any suggestions what might be the problem?
Thanks in advance
Marco

thanks, but i'm trying to get a ssl connection on port 6443.
I have also another error in the diagnostics check (maybe related)
An unexpected error occured
in Detail i get the error:
java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: Connection refused: connect
     at org.w3c.www.protocol.http.HttpURLConnection.error(Unknown Source)
     at org.w3c.www.protocol.http.HttpURLConnection.checkReply(Unknown Source)
     at org.w3c.www.protocol.http.HttpURLConnection.getResponseCode(Unknown Source)
     at com.sap.sup.admin.selfcheck.checks.helper.HttpHelper.getHttpResponseCode(HttpHelper.java:48)
     at com.sap.sup.admin.selfcheck.checks.wily.em.UICheck.process(UICheck.java:78)
     at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:165)
     at sun.reflect.GeneratedMethodAccessor541.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87)
     at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90)
     at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274)
     at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45)
     at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
     at java.lang.Thread.run(Thread.java:534)

Solution Manager Charm configuration

Hi @all,
I´am using SAP Solution Manager 7.0 SP 15. Configurated all Charm Steps successfully.
The SAP Solutoin Manager - Scenario- Specific Settings - Change Management - Extended Configuration -Checks - Execute Check Report is green
I can´t open any hance cycle in solar_project_admin - System Landscape - Change Requests , Create Task List, I get the result "project is not released. hance cycle can not be created".
If i click "check", there are three errors:
Message from function module /TMWFLOW/CALC_SINGLE_TRACK: No source system
(Message no. /TMWFLOW/TRACK_N103)
No track for project DF_WART_01 with log. system A36/200
(Message no. /TMWFLOW/CM_CHECK038)
CTS projects in production systems for project DF_WART_01
(Message no. /TMWFLOW/TASKLIST190)
System change options are empty.
In my authorized Change Requests - related documents (next document). i get "there are no actions in the Worklist"
i´ve no idea where my fault is. I hope you can help me.
Please suggest.
Best Regards
Daniel

Now I have created a new maintenance project, I´ve configured everything, when I check it, I get two errors:
No consolidation system found for A36-200 (project DF_SOLMAN1)
Message no. /TMWFLOW/TRACK_N806
No track for project DF_SOLMAN1 with log. system A36/200
Message no. /TMWFLOW/CM_CHECK038
I noticed that this thread is pretty old already but I bumped into similar error messages and in the end it was caused by a TMS route configuration that didn't match the configuration of the logical component that was in use.
You can pretty easily verify this through SMSY. Navigate to your logical component there, select the line of the system assignment and click on Shipment Routes button. If you get an empty screen back, then your TMS transport route configuration doesn't match your logical component configuration.
For example, you've got DEV 100 - DEV 200 - PRD 100 for a CHARM demo landscape. If your TMS transport route configuration matches this but your logical component has DEV 100 assigned as Quality Assurance, then your configuration check for CHARM will fail because there is a mismatch.
When your configuration is correct, so both your TMS transport route as your Logical Component (system role assignment), then you should get a transport route configuration back (visible) after clicking Shipment Routes.

Solution Manager - initial configuration

Lance,
I apologize before hand, I think I am missing something simple or I am clueless right now, Here is my situation-
I am walking through the IMG steps of setting up solution Manager. I already in have in place the SNC SAProuter connection operational to SAP.
SAPOSS connection is confirmed working.
I have gone to Tx DSWP, maintained the S- user for SAP support, and it connects and logs on, also re-entered the password and saved it to make sure it is working.
I have made sure the user I am using has the sap_suppdesk_admin role
When I go to SPRO and select initial configuration, it creates the admin and communication users, however when I put in the S-ID which I have it comes back with the following error message
error creating communication to SAP Service and Support
If I go to Tx SLG1, I get the error below
"read the documentation about the function module" SR (RFC Utilities)
Now I have done the same steps in client 001 and 100 which I created from 000 and user auth from 001.
I am just not able to get it to connect, the one thing I know is when I go to Tx AISUSER, I can put in a user but no contact person (s-id), I see a no. of posts in the forum about this but I do not believe thats my issue as that step is a 2 or 3 items below where I am right now.
i have the latest patches ST 400 0011
any ideas welcome

E::000 basically means that the system is trying to show an error message "000" from a specific error message set.This problem is caused by a program error. If the authorization check fails, no relevant error message is displayed.
have you created any system by the name SM1 in SMSY?
Regards,
Rajeev

Solution manager optimizer configuration

hi
     I am in solution manager 4.0 optimizer configuration step here i face an error when i type the t code solution_manager it displays the appropriate screen then i click on new button
here i entered the
                                solution name     sandbox landscape
                                       language      english
then when i click on continue button here nothing is happening actually it has to go to the next screen but the screen stands as if, nothing is happening   no reponse at all
support pack updated to stack 09
internet explorer 7 version is installed and all prerequisite is done
please help me
regards
senthil

Hi,
Can you tell what the error is? I may be able to help you.
Amol

Solution manager charm configure

hello everyone
i want to configure the charM scope with our R3 and BW at two domain .
R3 landscape
                    DEV(101sandbox,201-develop,301-customizing ,800unit testing)
                    QAS(800- testing)
                    PRD(800-prduct)
tranport   from DEV TO QAS and delivery to PRD ,also you can export the object from QAS to PRD for special .
domain controller is PRD
BW landscape BWD(client 100)--BWQ(client 880)BWP(client 880)
domain controller is BWP
if we use the charM for manager the change requst ,how we configure in all system for prepare the charM like the stms configure .
we notice our test system and prd system have same client number ,so it is ok for configure ?
expect your help!
thanks a lot!
frank

Hi,
1 QAS client and PRD client can be the same(need not to be different).
2. Make sure that the system landscape you mention under system landscape tab of SOLAR_PROJECT_ADMIN should match with TMS configuration of Solution Manager.(This is very important).
You should create a maintenance project with system landscape DEV-201->QAS-200->PRD-200 using SOLAR_PROJECT_ADMIN. Repeat this step for BW also.
   You need to configure TMS of Solution Manager in Client 000 as follows:
    SLM->DEV-201->(Consolidation Route)QAS-200->(Delivery Route)PRD-200
    SLM->BW-100->(Consolidation Route)BW-880->(Delivery Route)BW-880
No more document is required better than SPRO. Just follow this SPRO path to configure TMS:
SPRO->SAP Solution Manager->Configuration->Scenario-Specific Settings->Change Management
->Change Request Management->Standard Configuration->Transport Management System(Read IMG activity of each step).
Let me know if you have aby issues.
Regards,
Sanjai

Is there any service desk guide for Solution Manager 7 configuration?

Dear Sir:
I would like to configure the service desk of solution manager 7.
but all i found documents are for solution manager 4.
the IMG setting and other steps are quite different...
wondering is there any new guide or step by step documents for specific solution manager 7?
Regards
Jack Lee

hi,
There is no direct document which is that much specific
Have you checked this document
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
U can follow the steps and if u dont find any node u cn search in SPRO
in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
rest check this
Service Desk: Support team determination
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Service Desk Implementation Guide
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Hope it helps,
Regards
Prakhar

Earllywatchreport - Solution Manager Diagnostics Configuration

Similar Messages

Maybe you are looking for