Early 2008 Mac Pro - Can't load Boot Camp drivers for Win 7 64
Trying to install Win 7 64 bit on my early 2008 Mac Pro. I downloaded the Boot Camp drivers 4.0.4033 and installed them on a USB drive but, for some reason, when I try the install them during the process, I get a message that my hardware is not recognized. Skipping the driver loading process, I am able to install Win 7 but when the system trys to restart to continue the install, I get a message "disk error, press any key to restart". Pressing any key does not get me anywhere. I went through the Win 7 repair process and again tried to load the drivers with no luck.
Any thoughts would be appreciated.
Thank you,
That article was also my starting point and I have followed those steps again and again and again. I haven't slept, I haven't done anything other then try to make it work for more hours than I can count. I came here for help because that solution is not working for me.
The region and keyboard type settings simply don't have the Apple keyboard layout listed. As I said, someone on the Fusion forum tried to follow the article's instructions too and he managed to get it working because he COULD run setup.exe (Boot Camp Drivers) on his machine, and I CAN'T. Yes, it is all explained in that article... but the drivers WON'T INSTALL, I get an error message saying "This version of Boot Camp is not intended for this computer model".
First you said it wasn't physically possible for me to install the drivers, then you said I should just follow the article. Well, the article clearly says "Install the Boot Camp Windows device drivers in the virtual machine" which you just said couldn't be done! I want to cry. I should have just bought a second laptop, this is too painful.
Similar Messages
-
Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
RobertWhen you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Can't install Boot Camp Drivers on Win 7 (Fusion)
I'm really sorry - I know this has been asked a thousand times before, but every response I've found so far either didn't work for me or it was too technical for my limited knowledge. I'm on the verge of tears after having tried to solve the problem for over 5 hours. It's past 2am here in Australia and I really should go to sleep but this is driving me insane!
Yesterday I installed Windows 7 on my Macbook Air (13" 2011 model, running Mountain Lion) using Fusion 5. I need to run Windows-only applications for work, which also requires accents (I am a translator).
As I didn't go about it using Boot Camp, I tried following this step-by-step to get my keyboard working properly: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&d ocTypeID=DT_KB_1_1&externalId=1005578
No luck.
I downloaded the drivers using Boot Camp onto a USB stick formated as MS-DOS (FAT). I tried running setup.exe but keep getting the horrible "This version of Boot Camp is not intended for this computer model" no matter what (tried the "Troubleshoot compatibility" trick, tried re-formatting my stick and downloading the drivers again... nothing worked).
I then tried to run AppleKeyboardInstaller64.exe only and got an installation wizard. Windows says installation is complete, although I can't see this driver on the program list (should I?) - I can only it see it when I go to Control Panel\Programs\Programs and Features (from there I get the option to uninstall it but not to open it). HOWEVER, when I attempt to add an Apple keyboard, I can't see any, under any language.
I have tried alternative solutions like building my own keyboard layout but that didn't work either because I can't make the accent functions work in order to set up the layout!
Adding a foreign keyboard layout to Windows just gave me a very random set of strokes that will drive me insane if I have to type them regularly.
I just want to be able to use the standard strokes for accents on both OS:
Alt+e for á
Alt+i for ^
Alt+c for ç
Alt+` for à
Alt+n for ~
Can any good soul help me? I'm not an IT person, just someone who used to be married to her Mac (a very happy marriage) and who is now about to throw the laptop out of a window. Please HELP!!!That article was also my starting point and I have followed those steps again and again and again. I haven't slept, I haven't done anything other then try to make it work for more hours than I can count. I came here for help because that solution is not working for me.
The region and keyboard type settings simply don't have the Apple keyboard layout listed. As I said, someone on the Fusion forum tried to follow the article's instructions too and he managed to get it working because he COULD run setup.exe (Boot Camp Drivers) on his machine, and I CAN'T. Yes, it is all explained in that article... but the drivers WON'T INSTALL, I get an error message saying "This version of Boot Camp is not intended for this computer model".
First you said it wasn't physically possible for me to install the drivers, then you said I should just follow the article. Well, the article clearly says "Install the Boot Camp Windows device drivers in the virtual machine" which you just said couldn't be done! I want to cry. I should have just bought a second laptop, this is too painful. -
I have an early 2008 mac pro that will not boot. Power turns on, power LED turns solid, but no display ever comes up and it never chimes. I have tried swapping out RAM, hard drives, disconnecting all peripherals... any other suggestions? Dead logic board?
... and yes, I was too dumb to buy the AppleCare. Stupidest move I have ever made...Hi I think I have a similar problem.
My Mac Pro 8 core doesn't start up. When I turn it on here's what it does: the boot up sound > the grey/white screen with the apple logo and the little turning gear thing > then it freezes.
Sometimes after that the screen either goes blue with nothing but a mouse pointer that's moveable. but no login window. I can access the hardrive by network and weird enough it's booting on safe mode. I tried setting the SMC firmware but it didn't work. I took it to an apple store and when they plugged it into their displays it worked. When I brought it back, I plugged it into my Cinema Display 30" and the same problem started again. I reset the SMC firmware again and tried different displays I have at home but had the same problem. I plugged the 30" display into a Macbook Pro and it worked fine so I know that the display is not the problem. I've heard the the Nvidia 7300GT has caused problems but why would it work in the apple store? Any help out there? -
External desktop drives for early 2008 Mac Pro: USB 2.0 or 3.0 question
I have an early 2008 Mac Pro 3,1 (OS 10.6.8).
I currently have a 1 TB Fantom Drive with USB 2.0 that I use for the Time Machine. I want to get the second external drive to use as a boot drive so I can install & boot from Mountain Lion to use Maya 2014 3D application software that requires the Mountain Lion OS. For all other applications, I want to stick with Snow Leopard (10.6.8), which works well for me.
Most of the searches I've done for external drives have USB 3.0. Some have USB 3.0/2.0.
Questions:
1. Will one of the USB 3.0-only external drives work with my early 2008 Mac Pro 3,1, which is only equipped for USB 2.0? If so, would I need some sort of adapter? (I realize that the speed would still be USB 2.0 speed.)
2. Or do I need to get the USB 3.0/2.0 external drive (which is more expensive)? I am assuming this would not require any adapter.
3. Will I be able to boot from the external drive with Mountain Lion?
Thanks for any help with this.
SFirst, many thanks to both Grant Bennet-Alder and The hatter for their fast responses to my questions. I really appreciate this information. Based on your suggestions I did some research in order to better understand the proposed solutions.
Grant Bennet-Alder wrote:
You can add a PCIe card to get these interfaces:
eSATA
USB-3
1. Does one need to get a separate PCIe card for each interface, or is there one PCIe card for multiple interfaces?
The hatter wrote:
Installing or cloning OS X should be done on SATA II drive bay or external and then moved to the PCIe - depends what card you buy, and some issues are with arrays (no need for system on one).
2. I went to http://www.everymac.com/systems/apple/mac_pro/faq/, which says, "By default, a single 3 Gb/s Serial ATA -- sometimes referred to as SATA 2.0 or SATA II -- hard drive is installed in the first of four bays for all models." I interpret that to mean that SATA II is a in the first bay located on my internal hard drive. Can I create a partition here and install Mountain Lion as a separate system, and then move it to a PCIe SSD?
3. Or, can I install it on my external Falcon Drive (which has a Partition Map Scheme : GUID Partition Table, and which, I believe means it is not a bootable drive). Following that installation could I then move it to the PCIe SSD and boot Mountain Lion from there?
4. Or, if partitioning is an option, can I just clone it to the Falcon Drive for backup?
My apologies for my ignorance. This is not my forte. Thanks for any help you can give. -
Boot Camp drivers for windows (download)
I am trying to instal windows 7 on my MacBook Pro thru Boot Camp. Does anyone know where I can download the Boot Camp drivers for windows. I can't find them on the apple website and I don't have my Mac OS X instal DVD with me.
Thank youNick Px360 wrote:
Are they essential or can I run windows 7 on my Macbook Pro without the bootcamp drives
Only if you don't mind a Windows system lacking most features and thus beaing nearly unuseable.
Applying the appropriate drivers for hardware support is a must for all operating systems.
Stefan -
I have an early 2008 MAC PRO Quad Core 3.0ghz processor. 8 Gig of rams, with a 1 Gig memory Radeon 5770 HD Graphic Card running the latest Version of Snow Leopard OS. Last week lighting struck the house take out all of my hard drives (4) thank god the surge protector mitigated the mother board from damaged, use the Parted Magic to check out the motherboard and it intact with no damage. I can boot with the Parted-magic and be able surf and post this question to this forums. I replaced a newly formatted hard drive and trying to installed OS X Mountain Lions to the new drive, but unable to have it boot in my MAC PRO DVD, I get the usual chimes during the booting processed but the screen remain blackout, but able to boot with Parted-Magic to surf the web and access Apple sites/forums.
I am not well verse in using the Parted_Magic to repair or get my-mac to boot normally so I can reinstall OS X. Any help would appreciated.
Thank you
Disabled Veteran.Go to System Profile and look, does it say "MacPro3,1"?
That is 2008.
FBDIMM would be 800MHz. Did you use older slower 667MHz in yours?
You can but take a hit in performance.
Sounds like MacPro1,1.
Mac Pro (3.0GHz quad core (dual CPUs) 8GB 667 RAM)
In 2007 March an 8-core 3GHz did come out 2,1.
So just to be clear.
===========
It was all working fine a couple of days ago. At the time it randomly shut down I was trying to use Boot Camp to create a Windows 7 area,
Whenever you want to install Windows, remove all the drives other than the one Windows goes to. And if you use a dedicated drive YOU DO NOT NEED Boot Camp Assist, unless you use XP, which really is limited and crippled (one processor, 1.9GB RAM support).
And when it freezes, your only choice is to nuke (reformat) and restore or get out that backup CLONE you made before (ie, Step #1 in the Boot Camp Guide).
Sure that whole NTFS / MBR / GUID could be an issue, but you should just have a blank drive or clone.
No don't bother Apple, they seem to not have a good sense about Windows on Mac Pro anyway.
Other than zap pram from cold boot / tried booting with NO drives inside and just 10.6. DVD - should be fine.
You should be fine iwth Windows 7 DVD and one drive, or even XP.
Make sure you take your time and reconnect cards etc properly and any cables.
Booting from OS X DVDs may not work if there is a drive with a totally shot directory or partition table. Put them in FW case and turn on AFTER OS X is booted.
Why aren't people Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.2
How To clone -
So I've just got myself a early 2008 Mac Pro with a OCZ RevoDrive 80GB PCIe SSD to replace my old iMac which is slowly but surely giving up on me. I want to put my OS (mavericks) and some/all (whichever is possible/easier) apps, both apple and 3rd party, from my old iMac, onto the SSD but keep all my other data on the 2TB HDD, also from my old iMac, in the mac pro. Can anyone tell me how to do this/if its possible? (not massively tech savvy so simpleish language and steps would be handy!) Thanks!
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it. -
Early 2008 mac pro won't boot from hdd when ssd is installed
I have Mountain Lion 10.8.3 installed on my 1TB HDD in my early 2008 mac pro. That is the only OS install on my mac. I have an OWC SSD formatted but left as an empty drive that I am trying to use but when it's installed my mac hangs on the blank gray screen.
My mac cold boots fine and runs fine when the SSD is *not* installed. When I shut down and put the SSD into a drive bay the mac does seem to boot ok the first time, but when the computer is off for a while it will not boot. It just hangs on the blank gray screen (no apple logo). As soon as I pull out the SSD, the computer boots fine and runs fine again. I am not trying to boot off the SSD, I am booting off the HDD. The correct drive (1tb hdd) is selected in startup disk.
OWC has been helping me and I have tested 3 SSD's. So it does not appear to be a problem with their drive.
The mac will boot into safe mode with the SSD installed. It will boot if I choose the boot drive with the option key at startup.
Mountain Lion was clean installed.
Could it be some sort of library pref or cache issue?
Any recommendations on what to try?A HT does not find a lot of errors.
It doesn't look for bad sectors or directory or file problems.
Clone your SSD now that you have a clean OS and has the Apple updates on it. Before you make changes.
Install TRIM Enabler 2.2+ on it and any boot volume, to enable TRIM and so that Disk Utility's Repair Disk will trim cells. Mountain Lion Recovery won't which is a shame, so...
Clone and keep bootable backup clone of your system to use for maintenance.
A really bad directory on a system drive will cause interference from booting.
SSDs really need extra care, and even with TRIM, to be repaired from time to time and couple times a year, to do an erase and restore from a current image.
Of course Mac OS system even iwth apps is small and doesn't need to have any data or media and fits on 120GB usually just fine and still have a good enough amount free so TRIM and Garbage Collection can work properly and not get low on free pages. But 20GB free should be the minimum free, and better to have more, at least whatever total amount is written out in a month. -
With an early 2008 Mac Pro I'm about to add a second internal drive (1 TByte SATA) and initially install OSX Lion onto the new drive. Then to partition this new HDD via Boot camp. But my question is whether I am best advised to purchase the 64 bit version of Windows 7 (Home Premium) or the 32 bit version of Windows 7 (Home Premium) for the Windows sector of the disk What are the differences, and will I notice a difference in performance?
In chart from wiki, (scroll down to "Comparison chart") check the maximum CPUs supported.
You don't see this on MSoft's 1st searched for chart hit. This is one reason you will regret not paying for Professional+ if you get Home Premium 64 as I did for Mac Pro early 2008.
Home Prem Task Mgr sees 4 processors vs. the 8 that are seen by Pro+.
Costs more than a Mac upgrade to Lion if you make that mistake.
http://en.wikipedia.org/wiki/Windows_7_editions -
Can you marry a thunderbolt display to a early 2008 mac pro?
can you marry a thunderbolt display to an early 2008 mac pro?
You will need a DUAL-LINK DVI cable for that display.
<http://www.amazon.com/DVI-D-Male-Dual-Link-Cable/dp/B003QNDEGA>
Your video card is designed to run two 30" displays, but is getting old. Cards that age do fail due to bad capacitors, bad solder, of stuck fans. -
Early 2008 Mac Pro won't boot after installing 2nd DVD drive
All,
I purchased a Pioneer DVR-117D from Mac Sales and after installing it in my new refurbished 2008 Mac Pro it won't boot. My MP will boot if I remove the drive. According to the Mac Sales website this drive should work fine in my MP. Any ideas as to why this is happening. I literally just got my MP today and installed the drive. Is it the drive or the Mac Pro. Thank you all.The drive was set to master, I switched it to CS before I left for work but haven't tried reinstalling it. I will try when I get back and let you know if it worked. Thank you again.
-
Early 2008 Mac Pro + nVidia 8800: Never going to work?
This forum is littered with threads about early 2008 Mac Pros with the nVidia 8800 card - none of them positive.
I was unfortunate enough to wait for Apple to release such a machine and buy it. Graphics performance is dire given the hardware available. The machine routinely crashes with the window manager hang problem (the user interface just locks up, yet network services etc. still work), in the way familiar to anyone blighted by this particular bug; just run the Folding@Home client on your machine if you want to experience the joy. Or screensavers, sometimes, so I've had to turn those off. And I've had to turn off monitor power saving too, because I too suffer from the 'monitors sometimes don't wake up' bug. And of course I can't sleep the machine either, because firmware upgrade or not, it's still not reliable. And after all this, still the machine crashes.
SSH to the machine; try to restart cleanly; even 'sudo reboot' won't restart it. Apple have achieved something I've never seen out of any Unix or Unix-like operating system, ever; the kernel is unable to kill its own processes.
There have been no indications from Apple that I've seen on these forums over several weeks that the problem is even being acknowledged, let alone tackled. Latest reports indicate that even the 1st gen Mac Pro owners are suffering if they install the 8800.
http://discussions.apple.com/thread.jspa?threadID=1460752&tstart=0
My machine rarely makes it through the day without a forced reboot due to the window manager hanging. I can't do any work on it. I can't rely on it. I can't enjoy it. I can't even use it for web browsing without fear of it hanging.
There seem to be no facts about this at all. So all I can ask for is opinions. Does anyone have any offering of hope that early 2008 Mac Pros might ever work properly with 8800 cards? Y'know, little things, like actually being able to handle graphics? Or sleeping the monitors? Or, heaven forbid, sleeping the whole machine? Or should I just send it back as unfit for purpose?
Yours, tired and exasperated... :-/I posted this in some other blog (forum), I should have posted this here also but I hope this gives you and all with these problems hope!! I also ran some fish tank test some else posted to get the folding problem to happen and I can not get it to happen at all now, and since my 8800 went in I get NO LOCKUPS, SCREEN FREEZES, shaky blurry video when I boot, so far NOTHING, IT JUST WORKS!!!!!!!!
Now that I think about it the person who said to use the fish tank program had a bad 8800 and maybe you do also!! here is the link to that:
http://discussions.apple.com/thread.jspa?messageID=6965475�
I purchased my first mac pro early 08 2 months ago (amazon.com).
2 quad core 2.8's, 2 gig apple 4 gig OWC total 6 gig ram,2-WD raptors (1st mac 2nd boot camp winxp 32 bit), apple care.
I had all my problems with the ATI card (I always purchased ATI, never Nvidia, for all the PC's I built) a couple of times I bought the first ones out, these had all kinds of problems until good drivers that actually worked were released (usually 6-12 months after the release of the card).
So I try not to buy routers, graphic cards, etc.. for at least 6-12 months, but back to my 2600 card!!
When I received my mac the graphics would freeze, I did a lot of online reading only to find out the ATI 2600 was the problem, the cure was to hook up 2 monitors to the card (and that worked!!).
Then they came out with the firmware update, now my main monitor would after 2 days on a reboot be scambled (samsung syncmaster 213t, NEVER had ANY problem with it before on any PC I had, so I knew it was not the monitor) to fix the problem I had to either turn power off to the syncmaster or resetting PRAM (worked for a couple more days, then the same problem).
I called apple and they sent a tech out within days to replace the ATI card, the replacement did the same thing after a couple of days, so I called Apple back and they took a bunch of info from my computer (BTW not much at all loaded in the mac side) and said to call back in a week, so I called back a week later and they said they were going to exchange the card for either another ati 2600 or the Nvidia 8800, I said 8800 and a day later on a saturday I received it, swapped the card and NEVER HAD ANY PROBLEMS at all!!
So I don't know if the ATI card has problems with certain monitors or they are just poorly made (maybe AMD is mad with Apple that Apple did not use AMD processors).
I have read others that swapped with the 8800 and their problems went away also!!!!
Maybe some have no problems with the 2600, but I would not recommend it to anyone, if you can avoid the 2600 GO WITH THE 8800, the drivers will get better (and the 8800 will eventually outperform the ATI)and you will not be sorry.
Apple is awesome, they are 2nd to none, their is no other company like this anymore that I have dealt with in a long time (not just because they gave me a 8800), like I said in the beginning of this post I always purchased ATI cards and would have kept it if it would have worked but 2 doing the same, ATI [AMD] has lost my support until they prove otherwise.
I recommend Mac's to everyone now!!
good luck and let me know it any of this has helped!!!!!!!!!! -
Problem on my early 2008 Mac Pro
I had this problem with my early 2008 Mac Pro which started last week.
Some background; I'm using 8GB RAMs, using Snow Leopard and bootcamp Windows 7 and 3 days before the start of the problem, I had replaced the original 320GB HDD for 640GB HDD and reinstalled both OSes.
While I was playing some videos in Windows 7 last week, it displayed the blue screen with memory dump message and restarted on its own. Thereafter, I was unable to load Windows 7 and SL respectively, both hung before they can be loaded. In SL, I noticed that there were some faint red dots in the Apple logo and subsequently, the entire screen started to flicker with some random black and white strips. In Windows 7, it frozen at the Windows logo with a 640x480 resolution. My default resolution was 1920x1200. However, I managed to loaded into the safe mode of Windows and extracted my work.
I tried to re-install SL and it hung again at the Apple logo followed by the flickering.
I sent it to my local service centre and the technician removed my video card, RAMs and memory risers and cleaned the contact, ran the stress test overnight, AHT3A152 and ASD3S123 tests and concluded that he found no issues with the hardwares and the problem did not occur again.
The Mac Pro was sent back to me today and earlier, I started up with no problem and decided to remove the Windows partition and I restarted it again to confirm everything was ok. However, at the next startup, the problem re-surfaced and I could no longer start up my Mac Pro in SL.
I tried to swopped back the original 320GB HDD, but the problem still persists. Before I send back my Mac Pro to the service centre tomorrow, I would like to have some 2nd opinions. Based on my description, what is the likely cause of this problem, is the newly replaced 640GB be the root cause?Do you keep Windows on its own hard drive?
I would have kept the 320GB while using Windows WD Lifeguard to test, zero, run extended tests and slow long format of the new WD 640. Then just cloned system to new drive.
Casper 6.0 seems to be great utility if you want to avoid reinstalling 7, though I've found 7 to be fast and easy to install even with dozens of programs to add.
Are you using the current / latest graphic driver for 7? I don't notice you even list which card.
RAM - there is no perfect test, AHT finds some while Memtest takes time and may find others.
Windows may be more sensitive to weak hard drive sectors and memory than Mac OS or than HFS+.
Do you have any 3rd party devices? PCIe? Cables etc?
And you can't boot off Windows 7 DVD or Safe Mode?
Windows should automatically offer to boot in Safe Mode.
Also, try restore from last good restore point. -
What upgrade graphic card do i need for a early 2008 mac pro
I have a early 2008 Mac Pro. ATI Radeon HD 2600 XT 256 MB is what i have now. What is a good upgrade graphic card to get.
The GTX 780 6GB runs fine on the dual PCIe internal power cables -- as does the GTX 680 and Radeon HD 7950. The same can't be said of the GTX TITAN or GTX 780 Ti or Radeon R9 280X -- all of which require an auxiliary power feed to avoid a nasty power down of your tower at the worst moment when too much wattage is demanded of the Mac Pro's factory power supply.
Did I mention that the GTX 780 with 6GB of GDDR5 matches the 6GB of GDDR5 in the TITAN?
The one fallacy to my 'sweet spot' award has to do with OpenCL. In case you hadn't noticed, the AMD Radeon GPUs smoked the NVIDIA GeForce GPUs running Photoshop's OpenCL accelerated Iris Blur filter and rendering LuxMark's OpenCL accelerated Room scene.
- http://www.barefeats.com
So depends on budget, whether you want a PC card for less but no "early EFI boot screen" prior to drivers loading, and what apps and needs you have.
The one thing for sure is that 2600XT should have been retired ages ago and even more so with 10.8.3 and above, it could be trouble or just... PITA/POS.
Maybe you are looking for
-
DataControl not participating in frame transaction parent child taskflow
JDEV: 11.1.2.4.0 My application has a parent and multiple child taskflows as tabs. one of the child page has appModule method binding which modifies entities in the appModule. call works without any issues first time but subsequent calls displaying
-
Auto download TV shows from itunes to ipad?
Hello, Is there anyway I can set my IPad to auto download / receive the TV shows I have downloading. They auto download from iTunes on my mac in iTunes when they are available.. let me know if anyone can help me
-
Table update by pressing a button
hello, I would like to update all fields from r_wep where wep.gln is empty and field lieferdatum is today-100 days and r_warengru_nummer is 1,2,4 or 6 after pressing a button in the form. It should be filled with the field gln from r_kunde if the fie
-
How can I replace the Google and Yahoo toolbars which I now can't get with new Firefox?
Firefox 5 doesn't support google or yahoo toolbars
-
Can you create a web page/templete inside Illustrator and import/open in Dreamweaver to use as the graphics for the web page you are creating in Dreamweaver?