Early 2008 Mac Pro won't boot after installing 2nd DVD drive

All,
I purchased a Pioneer DVR-117D from Mac Sales and after installing it in my new refurbished 2008 Mac Pro it won't boot. My MP will boot if I remove the drive. According to the Mac Sales website this drive should work fine in my MP. Any ideas as to why this is happening. I literally just got my MP today and installed the drive. Is it the drive or the Mac Pro. Thank you all.

The drive was set to master, I switched it to CS before I left for work but haven't tried reinstalling it. I will try when I get back and let you know if it worked. Thank you again.

Similar Messages

Power Mac G4 Won't Boot after Installing 2nd Hard Drive and Additional RAM

Hello. I am using a Power Mac G4 (PCI graphics) that I bought a few weeks ago. It was working perfectly fine until I tried to add an additional hard drive and add more RAM to the machine. After I closed the case and plugged it back in, it won't start up at all. No sound, no lights, nothing spinning, nothing. I removed the added hard drive and RAM, but it still refuses to start. I don't know what happened. Hopefully it's not a logic board failure or anything else equally bad.

Welcome to Apple Discussions!
The PowerMac G4 PCI forum is over here:
http://discussions.apple.com/forum.jspa?forumID=586
I'll ask a moderator to move your thread. Try replacing the clock battery, and hitting the CUDAS switch.

Early 2008 Mac Pro Won't Boot

I have an early 2008 mac pro that will not boot. Power turns on, power LED turns solid, but no display ever comes up and it never chimes. I have tried swapping out RAM, hard drives, disconnecting all peripherals... any other suggestions? Dead logic board?
... and yes, I was too dumb to buy the AppleCare. Stupidest move I have ever made...

Hi I think I have a similar problem.
My Mac Pro 8 core doesn't start up. When I turn it on here's what it does: the boot up sound > the grey/white screen with the apple logo and the little turning gear thing > then it freezes.
Sometimes after that the screen either goes blue with nothing but a mouse pointer that's moveable. but no login window. I can access the hardrive by network and weird enough it's booting on safe mode. I tried setting the SMC firmware but it didn't work. I took it to an apple store and when they plugged it into their displays it worked. When I brought it back, I plugged it into my Cinema Display 30" and the same problem started again. I reset the SMC firmware again and tried different displays I have at home but had the same problem. I plugged the 30" display into a Macbook Pro and it worked fine so I know that the display is not the problem. I've heard the the Nvidia 7300GT has caused problems but why would it work in the apple store? Any help out there?

Early 2008 mac pro won't boot from hdd when ssd is installed

I have Mountain Lion 10.8.3 installed on my 1TB HDD in my early 2008 mac pro. That is the only OS install on my mac. I have an OWC SSD formatted but left as an empty drive that I am trying to use but when it's installed my mac hangs on the blank gray screen.
My mac cold boots fine and runs fine when the SSD is *not* installed. When I shut down and put the SSD into a drive bay the mac does seem to boot ok the first time, but when the computer is off for a while it will not boot. It just hangs on the blank gray screen (no apple logo). As soon as I pull out the SSD, the computer boots fine and runs fine again. I am not trying to boot off the SSD, I am booting off the HDD. The correct drive (1tb hdd) is selected in startup disk.
OWC has been helping me and I have tested 3 SSD's. So it does not appear to be a problem with their drive.
The mac will boot into safe mode with the SSD installed. It will boot if I choose the boot drive with the option key at startup.
Mountain Lion was clean installed.
Could it be some sort of library pref or cache issue?
Any recommendations on what to try?

A HT does not find a lot of errors.
It doesn't look for bad sectors or directory or file problems.
Clone your SSD now that you have a clean OS and has the Apple updates on it. Before you make changes.
Install TRIM Enabler 2.2+ on it and any boot volume, to enable TRIM and so that Disk Utility's Repair Disk will trim cells. Mountain Lion Recovery won't which is a shame, so...
Clone and keep bootable backup clone of your system to use for maintenance.
A really bad directory on a system drive will cause interference from booting.
SSDs really need extra care, and even with TRIM, to be repaired from time to time and couple times a year, to do an erase and restore from a current image.
Of course Mac OS system even iwth apps is small and doesn't need to have any data or media and fits on 120GB usually just fine and still have a good enough amount free so TRIM and Garbage Collection can work properly and not get low on free pages. But 20GB free should be the minimum free, and better to have more, at least whatever total amount is written out in a month.

My Early 2009 Mac Pro won't restart after installing Mavericks

I have installed Mavericks on my Early 2009 Mac Pro and all seemed to install just fine but when I restart the Mac then it won't get past a grey screen with Apple logo. It seems that it does get reasonabley far into the startup, it gets passed the grey screen with cricling progress thingmy under the Apple logo, then it flashes very quickly and after that it is a grey screen with the Apple logo and no further.
I did try installing Mavericks when it first came out and I had this problem so I just abandoned and reinstalled Mountain Lion from my Time Machine backup. However I thought that with Mavericks now at 9.1, maybe it would work okay this time but no change. However this time I do want to get it working because the lastest Final Cut Pro X requires Mavericks and I do a lot of video editing.
Here are the things I've tried which have made no difference:
Removed all peripherals, so that now nothing is plugged in except the original Apple Keyboard, my Apple trackpad and my Eizo monitor.
I tried starting it in Safe Boot mode but this made no difference.
I started it up in Recovery mode and it will start in Recovery mode. While in Recovery mode I checked the startup hard drive with Disk Utility, the drive is fine, as and I repaired disk permisions which made no difference.
I zapped the PRAM.
I connected it to my MacBook Pro in Target Disk mode and used ProSoft's Drive Genius 3 to check over the startup hard drive again and check disk permissions and all is well.
It still will not startup
I would be most grateful if someone could assist.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Early 2008 MacBook Pro won't boot after Lion 10.7.1 update

My 2.4 GHz 4GB RAM Early 2008 MacBook Pro wont boot after downloaded the Lion 10.7.1 upate. Upon restarting the screen went dead and now the system does not boot, as if the bootloader has been wiped out. Screen appears dead but was known to be working before hand. The hard drive spins up but doesn't sound like it is searching for data.
Can anyone help me?

Okay, I tried everything I can think of last night. I removed every startup process and every tool or programm that goes deeper into the system (GlimmerBlocker, LittleSnitch, Parallels). Cleaned Up every Cache I could find and refreshed every necessary Cache or Database possible. Took me a couple of hours. But still no luck - the machine doesn't boot, just in safe mode. Right now I copy all my personal stuff to a new external harddrive because TimeMachine doesn't work, after this I will do a clean install of Lion.
It's not hardware related, it's the 10.7.1 update that doesn't work properly. By the way, the only errors remaining are:
WindowServer - kCGErrorFailure
ManagedClient - kCGErrorFailure: CGSPackageGetWorkspaceType: couldn't get workspace type
SecurityAgent - kCGErrorFailure: CGSPackageGetWorkspaceType: couldn't get workspace type
and a lot of:
com.Apple.SecurityAgent.00000000-0000-0000-0000-0000000186A7: CoreAnimation: rendering error 506
that's also the last one I get before the system hangs…

My Mac Pro won't boot after installing the latest update

Im running the latest OSX on my mac and recenty did a small updated that i believe contain a few security thing and bug fixs but when restarting the machine after the update it would not boot again after the apple logo has appeard apple script is displayed on the screen contain what i think is boot script failing to run. I have been able to boot the system in safe mode. does anyone have and solution for this as i realy don't want to reinstall the OS
Thanks

The most common cause for "Won't boot after software Update" is Directory Damage that existed before the Update, but was made worse by adding files during the Update.
The most common cure for that Directory Damage problem is to boot in Safe Mode, which takes five minutes to repair the disk, then comes up demanding your username and password, even if you normally auto-login.
Rarely, third-party add-ons are made obsolete by an update. In this case, booting in Safe Mode (with few Apple extensions and NO third-party extensions loaded) works fine, even if normal mode does not work.
Have you tried normal mode again after your Safe Boot?

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Early 2008 Mac Pro won't start.

Early 2008 Mac Pro. Spelt some liquid on top that ran down front of computer. Tilted it back to wipe underneath and it shut down. Now it will not start. Processor fan runs full speed and that's it.

Hello,
My Friend spilt a drink on their laptop and the device started to smoke.
My suggestion is to get a hair tight container fill it with rice and put your computer in it, and leave it for 1-2 days.
The rice should absorb most of the water, and hopefully it should work again.
If it does turn on make sure you check the lights under the keys!
If they still don't work my suggestions are to take it in to an Apple store.
Good Luck!
I wish the best for your fellow Mac!

I just installed a 3TB hard drive on an early 2008 mac pro and the system doesn't recognize the drive. What now?

I just installed a 3TB hard drive on an early 2008 mac pro and it is not recognized/not visible. What now?

If the drive is correctly installed on to the sled, and the mounting screws are snug, not tight, and the sled is inserted properly so that all the roof-tangs catch as the sled is inserted, failure to show up in Disk Utility means the drive is not useable.
A Bug in 10.8.4 and later precludes Disk Utility ERASE-ing large drives in Internal bays. Use PARTITION only, and create one new partition, GUID partition Map, Mac OS Extended (journaled) Volume.

Radeon 5770 in 2008 Mac Pro, won't boot - hangs at Apple logo screen??

Okay, so I had the Radeon 2600 XT and it kept giving me issues with pink & white checkerboards and freezing, then eventually wouldn't let me boot past the white/grey apple logo loading screen. Now, today I installed Apple Radeon 5770, just installed, got the MiniDisplay to DVI-D adapter and everything, but it STILL won't let me get past the white/grey apple screen! I can't seem to get the DVD drive to open either. Both of my hard drives have been working fine and I've even swapped slots and i still can't get past the white screen! What gives? I just dropped over $300 for this, so you can imagine my dismay and frustration. Can someone please help me with some ideas? Would be GREATLY appreciated.
It's a 2008 Mac Pro dual 2.8Ghz (3,1), running 10.5.8
M

Yeah, ok thanks for the response about the screen! So, I don't have 10.6.5. I'm running 10.5.8, which the Radeon 5770 says it needs 10.6.5, but -finally- I got my computer to boot up with the 5770 in it, on 10.5. Al I did was hold OPTION+ Power button and it took me to a blue screen, then to my 500 GB new HD. I then switched over to my other username on Macintosh HD (drive that came with the MacPro) and OSX loads fine! I can tell that it still needs to be on 10.6.5, so I can download the drivers because the text is ever so slightly fuzzy, and the color isn't tuned well (too much contrast) and images take a little longer to load/ are a bit laggy. I'm just glad it's up and running! No more pink transparent checkerboards, and loud *** fan sounds! I am wondering though, what was causing this hold up? Is it only booting up because I have the 10.5.2 install disc in the SuperDrive? I almost don't want to take it out and try without it, after the trouble i've had, just in case lol. I'd like to have an idea as to why, because I don't want to mask a problem, and have it eventually turn into a catastrophe.

Mac Pro won't boot after adding new hard disk.

I have 2 SATA back up disks which I want to install in my Mac Pro. But when I install them into my mac and hit the ON button, I hear a "click" and nothing happens. When I remove the hard drives the Mac will boot. I also tried it with only one of the two hard drives but no luck.
What could this be ?

There is a lack of just what these are, outside of assuming 3.5" SATA
Did you erase or format them? what make/model and bought from where?
Tried booting OS X DVD?
also, if this is Early 2009 and you are still on 10.5.8, you should strongly consider if you use ANY audio program or deivce, to upgrade to 10.6.5+
PS: unplug? after shutdown? or in order to shutdown?
That can add trouble to your boot drive.
Try safe boot also. And check the directory of all your drives.

Mac Pro won't boot after forced shutdown

Hi all, hopefully someone will be able to help with this.
This is a Mac Pro (don't have the exact spec right now, but will have later, I think it's a dual), which is used to run ProTools. It has no internet or network connections.
It's running OS X 10.5.8 and has been for quite a while with no problems. Nothing new has been installed recently (hardware or software).
The other night it was playing back a ProTools session and recording a mix of the result when it started behaving strangely. When ProTools is recording, it creates a waveform display of the recording as it goes, and this suddenly started being corrupted by what appeared to be bits of a photograph or video image. The owner tried to hit "Stop", but nothing would work. Mouse still moved, but no button response, keyboard shortcuts ineffective, and Force Quit did nothing, so in the end he had to kill it by holding down the power button.
Since then it won't boot normally, though it will boot into Safe Mode with no problem.
On a "normal" startup, it powers up, goes through the grey screen/Apple logo/spinning thing stage on the left monitor, then that one goes blue, then both monitors go blue for a few seconds and finally both screens go black, with a mouse pointer in the top left of the left screen. You can move the mouse all over both screens (though if you wait a few seconds it leaves a copy of the pointer in the top left), but that's as far as it gets. Disk activity continues for a while (maybe a minute or so) after the screens go to black, and the spinning rainbow thing comes and goes, but it then seems to give up.
Here's what I've tried so far:
Boot into Safe Mode - no problem
Verify disk using Disk Utility - no problem
Repair permissions - loads of screwed up stuff, all with "permission should be ?-----" . Repair didn't work. Finally fixed these by running the 10.5.8 combo updater twice (known issue with this updater), then repairing again. Permissions now come up clean.
Cleared all caches etc. using Cocktail - slight improvement. Before this it was sticking on the one blue screen stage.
Got rid of a few corrupt preference files using Cocktail (all last modified years ago) - no difference.
Reset PRAM and MBC - no difference
Tried booting with everything disconnected except one screen, keyboard and mouse - no difference.
I'm going over later to see if reseating cards/removing memory etc. will make any difference, and to see if it will fire up fom it's original 10.4.? CD.
Beyond that, I'm kind of out of ideas, so I figured I'd see if anyone else had any!
Below is (what I think!) is the relevant bit of the log file, showing a failed boot, forced power off and reboot intoSafe Mode.
Any clues to corrupt files etc. in there?
Brian
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext is already loaded
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext is already loaded
Jan 17 19:19:30 localhost kernel[0]: npvhash=4095
Jan 17 19:19:28 localhost com.apple.launchctl.System[2]: BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
Jan 17 19:19:28 localhost com.apple.launchctl.System[2]: BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
Jan 17 19:19:29 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jan 17 19:19:29 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jan 17 19:19:29 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jan 17 19:19:29 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jan 17 19:19:30 localhost kextd[10]: 439 cached, 0 uncached personalities to catalog
Jan 17 19:19:30 localhost kernel[0]: hi mem tramps at 0xffe00000
Jan 17 19:19:30 localhost kernel[0]: PAE enabled
Jan 17 19:19:30 localhost kernel[0]: 64 bit mode enabled
Jan 17 19:19:30 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jan 17 19:19:30 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 17 19:19:30 localhost kernel[0]: vm_page_bootstrap: 714269 free pages and 72163 wired pages
Jan 17 19:19:30 localhost kernel[0]: mig_table_max_displ = 79
Jan 17 19:19:30 localhost kernel[0]: Error: Couldn't read XML property list for multikext archive entry 115.
Jan 17 19:19:30 localhost kernel[0]: XML parse error: OSUnserializeXML: syntax error near line 1
Jan 17 19:19:30 localhost kernel[0]: .
Jan 17 19:19:30 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:30 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=6 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=7 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jan 17 19:19:30 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jan 17 19:19:30 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jan 17 19:19:30 localhost kernel[0]: calling mpo_policy_init for mb
Jan 17 19:19:30 localhost kernel[0]: Seatbelt MACF policy initialized
Jan 17 19:19:30 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jan 17 19:19:30 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 17 19:19:31 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 17 19:19:31 localhost kernel[0]: MAC Framework successfully initialized
Jan 17 19:19:31 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
Jan 17 19:19:31 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:31 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.AppleIntelCPUPowerManagement: Enabling legacy HPET check
Jan 17 19:19:31 localhost kernel[0]: mbinit: done
Jan 17 19:19:31 localhost kernel[0]: Security auditing service present
Jan 17 19:19:31 localhost kernel[0]: BSM auditing present
Jan 17 19:19:31 localhost kernel[0]: rooting via boot-uuid from /chosen: A3A529FC-62F4-3CBC-91C6-E6C6DC1F954B
Jan 17 19:19:31 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 17 19:19:31 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe92f662; max speed s800.
Jan 17 19:19:31 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3250820AS P Media/IOGUIDPartitionScheme/Customer@2
Jan 17 19:19:31 localhost kernel[0]: BSD root: disk0s2, major 14, minor 5
Jan 17 19:19:31 localhost kernel[0]: Jettisoning kernel linker.
Jan 17 19:19:31 localhost kernel[0]: Resetting IOCatalogue.
Jan 17 19:19:31 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:19:31 localhost kernel[0]: Matching service count = 2
Jan 17 19:19:31 localhost kernel[0]: Matching service count = 3
Jan 17 19:19:31: --- last message repeated 4 times ---
Jan 17 19:19:31 localhost kernel[0]: Matching service count = 4
Jan 17 19:19:31 localhost kernel[0]: MacPro1,1: stalling for module
Jan 17 19:19:31 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jan 17 19:19:32 localhost kernel[0]: Matching service count = 1
Jan 17 19:19:32 localhost kernel[0]: AppleTyMCEDriver::probe(MacPro1,1)
Jan 17 19:19:32 localhost kernel[0]: AppleTyMCEDriver::probe fails
Jan 17 19:19:32 localhost kernel[0]: Previous Shutdown Cause: 3
Jan 17 19:19:33 localhost kernel[0]: Probing MOTU Driver
Jan 17 19:19:33 localhost kernel[0]: IOKit version is "Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386"
Jan 17 19:19:33 localhost kernel[0]: uhcim Not using bug fix
Jan 17 19:19:33 localhost kernel[0]: GetDevInfoForSubclass interfacesubclass 0 forUHCI 0
Jan 17 19:19:34 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jan 17 19:19:34 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:19:34: --- last message repeated 3 times ---
Jan 17 19:19:34 localhost kernel[0]: Matching service count = 0
Jan 17 19:19:35 localhost bootlog[65]: BOOT_TIME: 1326824366 0
Jan 17 19:19:36 localhost rpc.statd[47]: statd.notify - no notifications needed
Jan 17 19:19:37 localhost fseventsd[56]: bumping event counter to: 0x28c7 (current 0x0) from log file '0000000000000665'
Jan 17 19:19:39 localhost DirectoryService[61]: Launched version 5.7 (v514.25)
Jan 17 19:19:42 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[52]: Login Window Application Started -- Threaded auth
Jan 17 19:19:44 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9c
Jan 17 19:19:44 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9d
Jan 17 19:19:45 localhost com.paceap.pacesupport[68]: kextload: /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns/PACESupportL eopard.kext loaded successfully
Jan 17 19:19:49 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en0 called by enableHardware() --
Jan 17 19:19:49 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:49)[51]: starting
Jan 17 19:19:50 localhost /usr/sbin/ocspd[94]: starting
Jan 17 19:19:52 localhost kextd[10]: writing kernel link data to /var/run/mach.sym
Jan 17 19:19:54 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en1 called by enableHardware() --
Jan 17 19:19:54 *****-****-computer configd[63]: setting hostname to "*****-****-computer.local"
Jan 17 19:19:56 *****-****-computer org.ntp.ntpd[42]: Error : nodename nor servname provided, or not known
Jan 17 19:19:56 *****-****-computer ntpdate[106]: can't find host time.euro.apple.com
Jan 17 19:19:56 *****-****-computer ntpdate[106]: no servers can be used, exiting
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: PACESupport - launchd already started us
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiIO.kext is already loaded
Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiDal.kext is already loaded
Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:09 *****-****-computer loginwindow[52]: Login Window Started Security Agent
Jan 17 19:20:15 *****-****-computer com.apple.launchd[1] ([0x0-0x5005].com.dantz.RetroRunSL[123]): Stray process with PGID equal to this dead job: PID 125 PPID 1 RetroRunSL
Jan 17 19:23:49 *****-****-computer com.apple.firmwaresyncd[57]: kextload: /System/Library/Extensions/msdosfs.kext loaded successfully
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** /dev/rdisk1s2
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Root file system
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Journaled HFS Plus volume.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Extents Overflow file.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Catalog file.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking multi-linked files.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Catalog hierarchy.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Extended Attributes file.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking volume bitmap.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking volume information.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** The volume Macintosh HD appears to be OK.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ***** FILE SYSTEM WAS MODIFIED *****
Jan 17 19:28:20 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jan 17 19:28:20 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jan 17 19:28:20 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jan 17 19:28:20 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jan 17 19:28:21 localhost kernel[0]: npvhash=4095
Jan 17 19:28:20 localhost kextd[9]: safe boot detected
Jan 17 19:28:21 localhost kernel[0]: hi mem tramps at 0xffe00000
Jan 17 19:28:20 localhost kextd[9]: safe boot; invalidating extensions caches
Jan 17 19:28:21 localhost kernel[0]: PAE enabled
Jan 17 19:28:21 localhost kernel[0]: 64 bit mode enabled
Jan 17 19:28:21 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jan 17 19:28:21 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 17 19:28:21 localhost kernel[0]: vm_page_bootstrap: 508650 free pages and 277782 wired pages
Jan 17 19:28:21 localhost kernel[0]: mig_table_max_displ = 79
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=6 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=7 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jan 17 19:28:21 localhost kernel[0]: calling mpo_policy_init for mb
Jan 17 19:28:21 localhost kernel[0]: Seatbelt MACF policy initialized
Jan 17 19:28:21 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jan 17 19:28:21 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jan 17 19:28:21 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jan 17 19:28:21 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 17 19:28:21 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 17 19:28:21 localhost kernel[0]: MAC Framework successfully initialized
Jan 17 19:28:21 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
Jan 17 19:28:21 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21: --- last message repeated 1 time ---
Jan 17 19:28:21 localhost kernel[0]: AppleIntelCPUPowerManagement: Enabling legacy HPET check
Jan 17 19:28:21 localhost kernel[0]: mbinit: done
Jan 17 19:28:21 localhost kernel[0]: Security auditing service present
Jan 17 19:28:21 localhost kernel[0]: BSM auditing present
Jan 17 19:28:21 localhost kernel[0]: rooting via boot-uuid from /chosen: A3A529FC-62F4-3CBC-91C6-E6C6DC1F954B
Jan 17 19:28:21 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 17 19:28:21 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe92f662; max speed s800.
Jan 17 19:28:21 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3250820AS P Media/IOGUIDPartitionScheme/Customer@2
Jan 17 19:28:21 localhost kernel[0]: BSD root: disk1s2, major 14, minor 5
Jan 17 19:28:21 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 23181312 to: 122368 (joffset 0x746000)
Jan 17 19:28:21 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Jan 17 19:28:21 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jan 17 19:28:21 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files or directories
Jan 17 19:28:21 localhost kernel[0]: Jettisoning kernel linker.
Jan 17 19:28:26 localhost bootlog[36]: BOOT_TIME: 1326824767 0
Jan 17 19:28:26 localhost fseventsd[27]: event logs in /.fseventsd out of sync with volume. destroying old logs. (330 139 558)
Jan 17 19:28:27 localhost rpc.statd[18]: statd.notify - no notifications needed
Jan 17 19:28:27 localhost fseventsd[27]: log dir: /.fseventsd getting new uuid: 07B57D5F-5A7E-483F-8FBE-40E8DF7E6E23
Jan 17 19:28:32 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
Jan 17 19:28:32 localhost DirectoryService[32]: Improper shutdown detected
Jan 17 19:28:38 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9c
Jan 17 19:28:38 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9d
Jan 17 19:28:43 localhost kernel[0]: Resetting IOCatalogue.
Jan 17 19:28:43 localhost kextd[9]: 0 cached, 291 uncached personalities to catalog
Jan 17 19:28:44 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:28:44 localhost kernel[0]: Matching service count = 2
Jan 17 19:28:45 localhost kernel[0]: Previous Shutdown Cause: 3
Jan 17 19:28:45 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:49)[22]: starting
Jan 17 19:28:46 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
Jan 17 19:28:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jan 17 19:28:50 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:28:50 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en0 called by enableHardware() --
Jan 17 19:28:52 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:28:52 localhost kernel[0]: Matching service count = 0
Jan 17 19:28:54 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en1 called by enableHardware() --
Jan 17 19:28:54 *****-****-computer configd[34]: setting hostname to "*****-****-computer.local"
Jan 17 19:28:56 *****-****-computer org.ntp.ntpd[13]: Error : nodename nor servname provided, or not known
Jan 17 19:28:56 *****-****-computer ntpdate[68]: can't find host time.euro.apple.com
Jan 17 19:28:56 *****-****-computer ntpdate[68]: no servers can be used, exiting
Jan 17 19:28:56 *****-****-computer com.apple.ATSServer[67]: FODBCheck: New annex file created
Jan 17 19:28:57 *****-****-computer /usr/sbin/ocspd[73]: starting
Jan 17 19:29:01 *****-****-computer kextd[9]: writing kernel link data to /var/run/mach.sym
Jan 17 19:29:04 *****-****-computer loginwindow[23]: Login Window Started Security Agent
Jan 17 19:29:05 *****-****-computer fseventsd[27]: event logs in /Volumes/DATA DRIVE/.fseventsd out of sync with volume. destroying old logs. (63 0 598)
Jan 17 19:29:05 *****-****-computer fseventsd[27]: log dir: /Volumes/DATA DRIVE/.fseventsd getting new uuid: 0E7FBB62-F55F-413D-970B-FB402543BF2D
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: PACESupport - launchd already started us
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: /System/Library/Extensions/DigiIO.kext loaded successfully
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: sending personalities to kernel:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOStorageFamily.kext:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOFDiskPartitionScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOMediaBSDClient
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOGUIDPartitionScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOAppleLabelScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOBlockStorageDriver
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOApplePartitionScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOPCIFamily.kext:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-Name
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-i386
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-PCI
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/DigiIO.kext:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         DigiIO
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: sending 10 personalities to the kernel
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: matching started for /System/Library/Extensions/DigiIO.kext
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: /System/Library/Extensions/DigiDal.kext loaded successfully
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: sending personalities to kernel:
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOPCIFamily.kext:
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-Name
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-i386
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-PCI
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/DigiDal.kext:
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIPLXDevice
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinRev2Farm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinFarm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinEngine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceHiNTHB2
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceDEC21154
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIFarm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDevicePericom8154
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         DigidesignGeneral
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIFarm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinRev2Engine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIEngine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDevicePLXPCIExpress
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         MotorolaPresto
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIPLXDevice
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceDEC21154BE
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceHiNTHB4
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIEngine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: sending 21 personalities to the kernel
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: matching started for /System/Library/Extensions/DigiDal.kext
Jan 17 19:29:11 *****-****-computer com.apple.launchd[1] ([0x0-0x4004].com.dantz.RetroRunSL[83]): Stray process with PGID equal to this dead job: PID 95 PPID 1 RetroRunSL
Jan 17 19:29:37 *****-****-computer com.apple.dyld[10]: update_dyld_shared_cache[10] regenerated cache for arch=i386
Jan 17 19:31:09 *****-****-computer authorizationhost[82]: MechanismInvoke 0x1d2de70 retainCount 2
Jan 17 19:31:09 *****-****-computer SecurityAgent[92]: MechanismInvoke 0x5b31950 retainCount 1
Jan 17 19:31:09 *****-****-computer SecurityAgent[92]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Jan 17 19:31:10 *****-****-computer SecurityAgent[92]: MechanismDestroy 0x5b31950 retainCount 1
Jan 17 19:31:10 *****-****-computer authorizationhost[82]: MechanismDestroy 0x1d2de70 retainCount 2
Jan 17 19:31:10 *****-****-computer loginwindow[23]: Login Window - Returned from Security Agent
Jan 17 19:31:10 *****-****-computer loginwindow[23]: USER_PROCESS: 23 console
Jan 17 19:31:10 *****-****-computer com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[79]): Exited: Terminated
Jan 17 19:31:10 *****-****-computer com.apple.launchctl.Aqua[110]: launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/RemoteUI.plist
Jan 17 19:31:10 *****-****-computer com.apple.launchd[108] (org.x.startx): Unknown key for boolean: EnableTransactions
Jan 17 19:31:10 *****-****-computer /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer[118]: (-3230) Cannot use ATS Persistent Store - switching to old FODB cache code
Jan 17 19:31:13 *****-****-computer /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(***** ***'s Public Folder) returned -14135
Jan 17 19:31:18 *****-****-computer /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 22]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Jan 17 19:31:18 *****-****-computer /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 22]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Jan 17 19:32:21 *****-****-computer Cocktail[129]: Cocktail 4.7 launched.
Jan 17 19:32:24 *****-****-computer com.apple.FolderActions.enabled[141]: launchctl: Error unloading: com.apple.FolderActions.folders
Jan 17 19:32:32 *****-****-computer authexec[146]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer Cocktail[129]: ***** *** authenticated.
Jan 17 19:32:32 *****-****-computer authexec[149]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[151]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[153]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[155]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[157]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[159]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[161]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[163]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[165]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[167]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[169]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[171]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[173]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[175]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[177]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[179]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:38 *****-****-computer defaults[184]: \nThe domain/default pair of (com.apple.spotlight, DictionaryLookupEnabled) does not exist
Jan 17 19:32:38 *****-****-computer defaults[185]: \nThe domain/default pair of (com.apple.spotlight, CalculationEnabled) does not exist
Jan 17 19:32:38 *****-****-computer defaults[186]: \nThe domain/default pair of (com.apple.systempreferences, TMShowUnsupportedNetworkVolumes) does not exist
Jan 17 19:32:38 *****-****-computer authexec[188]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:38 *****-****-computer authexec[190]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:38 *****-****-computer defaults[190]: \nThe domain/default pair of (/System/Library/LaunchDaemons/com.apple.backupd-attach, Disabled) does not exist
Jan 17 19:32:38 *****-****-computer defaults[191]: \nThe domain/default pair of (com.apple.TimeMachine, DoNotOfferNewDisksForBackup) does not exist
Jan 17 19:32:38 *****-****-computer defaults[192]: \nThe domain/default pair of (com.apple.finder, _FXShowBackgroundAnimation) does not exist
Jan 17 19:32:38 *****-****-computer authexec[194]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:39 *****-****-computer authexec[204]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:39 *****-****-computer defaults[204]: \nThe domain/default pair of (com.apple.loginwindow, StartupDelay) does not exist
Jan 17 19:32:39 *****-****-computer authexec[206]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:39 *****-****-computer defaults[206]: \nThe domain/default pair of (com.apple.loginwindow, Kiosk) does not exist
Jan 17 19:32:42 *****-****-computer defaults[207]: \nThe domain/default pair of (com.apple.desktopservices, DSDontWriteNetworkStores) does not exist
Jan 17 19:32:47 *****-****-computer authexec[213]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:48 *****-****-computer authexec[215]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:44:05 *****-****-computer Cocktail[129]: System log (/private/var/log/system.log) has been saved to /Users/********/Library/Logs/System LOg 2.log.
Jan 17 19:44:45 *****-****-computer fseventsd[27]: log dir: /Volumes/NO NAME/.fseventsd getting new uuid: 2DADE658-7648-47A4-A16F-8B77B56B575C
Jan 17 19:46:33 *****-****-computer Cocktail[246]: Cocktail 4.7 launched.
Jan 17 19:46:34 *****-****-computer [0x0-0x1b01b].com.apple.systemevents[254]: com.apple.FolderActions.enabled: Already loaded
Jan 17 19:46:36 *****-****-computer authexec[257]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer Cocktail[246]: ***** *** authenticated.
Jan 17 19:46:36 *****-****-computer authexec[260]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[262]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[264]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[266]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[268]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[270]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[272]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[274]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[276]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[278]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[280]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[282]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[284]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[286]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[288]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[290]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:39 *****-****-computer defaults[292]: \nThe domain/default pair of (com.apple.desktopservices, DSDontWriteNetworkStores) does not exist
Jan 17 19:46:44 *****-****-computer authexec[298]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:44 *****-****-computer authexec[300]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid

Hi,
Yes, I did resolve it - it was the graphics card. Changed that, updated OS X and it was done.
I can't now remember exactly which card I used, and I'm away at the moment so I can't get to the infomation, but I do remember that it was a full length card with a large heatsink, and was a bit of a pig to squeeze into the chassis!
Had to buy an adaptor for the second monitor connection, but that didn't cause any hassle. I got the card and cable from the local Apple Store.
It also theoretically needed a later version of OS X than was already there, but since it allowed me to boot off the CD, that didn't matter (and it worked with the old one anyway, as it turned out).
Oh, and also of course, although it's a bog standard PC card, you have to pay way over the odds for it because it has to have different PROMS for a Mac. (Thank you Apple.) Just part of the price we all have to pay for using Macs.
I seem to remember that there was a certain amount of dancing involved in upgrading the OS afterwards (might have had to do one step twice), but nothing that unusual.
Hope this helps,
All the best,
Brian

Mac Pro won't boot after Restart

I have a Mac Pro 2,1 (late 2007) running OS 10.6.8. I recently did two attempted upgrades:
1. I Installed another 16GB of RAM on top of the 16 I already have. It was fully compatible, installed as advised by Apple). But I was getting Kernel panics so the RAM sellers said it was probably just a bad chip, and so are replacing it.
2. I tried installing a second nVidia Quadro 4500 x2 video card (so i could have 4 displays). It wasn't detected, and I soon realized that it was the PC Firware version! (I didn't plug in a power supply like one is supposed to for the Mac version!). After taking the nVidia out I've been having the following problem and I'm afraid this card could have affected my motherboard:
When I select "Restart" from the Apple menu, the computer fails to re-boot. It makes a small whirring noise, but will not restart. I have to hold down the power button, then Start Up manually. If I go Apple menu -- "Shut Down" - then it shuts down ok. But I can only re-boot the computer using the button.
Beyond a mere annoyance, I'm afraid this issue is symptomatic of a deeper problem with my computer.
I already (I believe) reset my PRAM and also did a complete power-down reboot.
I also have a MOTU PCI 424e card installed, and has been working fine for years. When I tried putting in the new video card I briefly took out the 424 to make the installation easier, then replaced it. Not certain if replaced it in the same slot (or if this matters, since the sound card is a x2 card), although both my original nVidia Video card and the Soundcard are working fine. Just thought I'd mention these also.
Please help!!
thanks

Try this next:
Intel-based Macs: Resetting the System Management Controller (SMC)

My Early 2008 MacBook Pro won't boot correctly

alright so I have always wanted a macbook and I finally bought an early 2008 model from my friend due to he lack of cash to buy a newer one, so after a while it started booting slowly, like it would work but it would boot slowly, I tried to format it but I'd always get and error that said "could not validate source - error 254" any help on how I can fix this ? Ive run fsck multiple times and it tells me everything is ok, is there any other way to format my drive ? Oh and booting from the cd just gives me a folder with a question mark soooo yea any help would be appreciated, it runs mavericks and has been fine up until now

The startup drive is failing, or there is some other internal hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Early 2008 Mac Pro won't boot after installing 2nd DVD drive

Similar Messages

Maybe you are looking for