Early 2008 Macbook Pro hard drive crashed, need to install a backup on a new disk. How?

My early 2008 250gb hard drive recently broke and I took the opportunity to upgrade to a new 500gb drive. I had OSX Lion on my old drive, but I only have my original OSX Leopard install disk.
My question is:
How can I migrate my old (complete) back-up onto this new drive? And should I use disk utility (I never use time-machine).
Any idea on how to fix this issue, or a detailed explanaition would be extremely helpful!

OS X Lion: Back up your Mac

Similar Messages

  • Early 2008 MacBook Pro hard drive was killed; how to sync stuff

    My early 2008 MacBook Pro hard drive was reimaged (not by me) and they lost everything on there, and have now put in a new hard drive, saying nothing was salvageable on the original HD. I have an iPhone, iPod, iPad. When i get the MBP back, how will I be able to get those devices synced so that everything I've bought/have goes back onto the HD?
    The original HD was being reimaged because my work requires use of Windows, and I was using Windows via Boot Camp. Windows got a terrible rogue virus (from my clicking on a link), which shut everything down on that side. Work tech folks said they needed to reimage the Windows part of the drive, but said in the process, the reimaging took everything, Mac stuff included. That's why I'm in this situation. They are going to put in a new hard drive, but it is a blank slate.
    Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes. (For those who say shame on me, for not doing a backup sooner, you're right: But we have gone through 3 moves in 18 months, so it has been kinda nuts.)
    I expect the MBP to get sent back to me in the next day. I have no idea how to put these pieces back together. I'm not even sure about data recovery, but am most concerned about iTunes/iPhone/iPod/iPad.
    Thanks for your help!

    suzannemacuser wrote:
    Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes.
    Two years ago??? Shame on you!!! 
    I found this the other day. It's old but still applies. This should be more than enough to help you get back on track. See the comments by Zevoneer
    https://discussions.apple.com/message/7217190#7217190
    You will have to check on each of these. Some of the links are outdated but there is more than enough to get you started. See this article about transferring purchases. The link is in the other thread as well.
    http://support.apple.com/kb/HT1848?viewlocale=en_US
    Backup! Backup! Backup!
    Message was edited by: Demo

  • My MacBook Pro hard drive crashed a little while ago and has been replaced.  Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?

    My MacBook Pro hard drive crashed a little while ago and has been replaced.  Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?  Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well?  Thanks for any help!

    [Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
    [Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
    [http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
    [Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
    [Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465]

  • Can I Replace my Early 2009 Mac Mini Hard Drive with my Early 2011 Macbook Pro Hard Drive?

    I am replacing my 2011 Macbook Pro Hard Drive with a Solid State Drive.  Instead of keeping the hard drive on an external enclosure I was wondering if I can use it to upgrade my Mac Mini's 160GB hard Drive with the one Im taking out of the MBP.  And if so, is there any special formatting I would need to do?

    It should work fine. No special formatting required. It actuality, I suspect that if you connect the HD, the Mini will boot into the OSX that was on the MacBook.
    When you replace the HD in the Mini just be careful with the antennas and their wires and connections I accidentally disconnected the wifi antenna on mine when I replaced the HD.

  • Renewing a Late 2008 MacBook Pro: hard drive and battery substitution

    Hi all,
    I am an happy user of a late 2008 MacBook pro.
    However, with the passing of time, it became slow and the battery also deteriorate (it still quite OK, but it is not like at the beginning).
    But let's start from the beginning: the hard drive
    By googling for a while, I noticed that several people experienced very slow performance of their late 2008 MacBook Pro. That is also my case. Apparently, this is due to the hard disk which is dying, and then I considering to change it. However, I haven't found answers to these questions:
    - Is it possible to mirror all the containt of the current disk to the new one?
    - I only have the original installation disks of the first Leopard. I made all the updates through the network. Moreover, since it passed lot of time, I am afraid that some sector of the installation disks may be damaged. This means that I may fail in the installation of Mac Os X on the new hard drive. If I have to reinstall everything from scratch with the new hard drive and without installation disks, how should I do?
    - If I go a Mac Reseller shop, will do they perform this operation? And how much does it costs to make it? Or I may also go to some generic computer reparation guy?
    - Is it convenient to save all the data (movies, documents, pictures, emails, etc) somewhere (e.g. external HD) and then perform a completely new installation?
    Next, let's consider the battery.
    Here is a screenshot taken with iStat Pro:
    Do you think it is worth changing it? From System Profile I have those other info:
      Full charge capacity (mAh):          3386
           Current (mA):          846
           Voltage (mV):          12029
      Condition:          Replace soon
    What do you suggest to do then? How much does it cost a new battery? Actually, I think that also the processor performance deteriorate (it often becomes very hot, especially when watching Flash or Silverlight stuff), but, unfortunately I cannot change it.

    Hi!
    Thanks for all the answer. Please let me to resume this old and interesting discussion.
    After having evaluated several solutions (including NAS, different ways of backup, etc) I bought an external firewire HDD, since I believe it nicely fits my necessities. Next, after these holidays, I will finally replace my old HDD with a SSD one. I think 120 GB are ok. I just need the apps and small-sized documents (rather LaTeX, Matlab, word, pages or excel documents, etc. - no movies or mp3 (I have Spotify, for that) ). Large files (e.g. movies, pictures, etc) may end up in external firewire HDD.
    Now, let's consider the OS. I currently have 10.6.8 and I am very satisfied of that. I find it very stable, and all the apps I need are still well supported. On the other hand, given that there are like 5 years that I have the same installation, I may have a lot of obsolete files and setting that I can safely remove. This means that once I will have performed a backup of my documents, my email, my pictures etc. I can safely throw away all the rest. Hence, I may perform a brand-new installation of the OS. Although I am happy with 10.6.8, I was wondering if it is worth to upgrade it (I have a 2.53 Ghz Intel Core 2 Duo - 4 GB 1067 Mhz DDR3 RAM) to Lion, Mountain Lion or Mavricks. In that case, which would be the real benefits? And what about the cons?
    Finally consider that I only have the Leopard installation disks from 2008 (not even Snow Leopard) and I will bring my laptop to a techician to change the HDD (I know, it is simple but I don't have all the screws etc. and I will not buy them only for this purpose). Once he will have replaced the HDD, will he re-install the OS also? Or I have to reinstall the OS through my original DVD (5 years old, I don't even know if they still work) and upgrade to Snow Leopard again by myself? I would exclude the carbon copy solution since I may want to throw away a lot of garbage and perform a brand new instalation of the OS. How to proceed? Thanks again!

  • Macbook Pro hard drive crash

    I have a MacBookPro7,1 Model No: A1278 which has recently had a hard drive crash.
    The hard drive clicks and I cant boot up.
    I bought the machine from a friend who has since moved away and I cant contact him to get the original disc
    that came with the machine.
    I have a 500 gb Hitachi hard drive from a Windows machine that is formatted in NTFS.
    Installing the hard drive is not a problem, but where do I get an operating system and how do I install it.
    Can anyone help...

    Your profile says MBP wit 10.6.8 which is Snow Leopard. So I assumed you knew what that was because it would have come with your computer. I don't know what more to tell you unless I know the exact MBP model you have and if you have the original installer discs that came with it.
    The phrase should be read to mean the same as "a freshly prepped HDD." This entails:
    Drive Partition and Format
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Note that you must be able to boot the computer from an installer disc such as a Snow Leopard DVD. A retail copy is available by:
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    This DVD will only work if your MBP does not require 10.63 or later, and this is determined by whether your MBP is from 2009 or earlier.
    As an alternative you can purchase replacement discs for the computer from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.

  • Old Hard drive crashed, need to transfer music from iPod to new computer

    Hello. My old hard drive crashed and I bought a new computer. Unfortunately I did not back up any files from my old computer and lost all files including iTunes music. All I have is the music from my iPod. I would like some help or if anyone knows anything about how to transfer the music from my iPod to my new computer. I guess my new computer is not the original authentic one in the itunes system and will not let me exchange music from my iPod to new computer. I would appreciate help if anyone has ideas. Thank bunches.

    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    SharePod Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

  • My macbook pro hard drive crashed, new one installed, need to reload my cs5 and lightroom on new hard drive

    Help!  Can't figure out how to download cs5 & light room on my new hard drive after macbook pro crashed.  any ideas

    You can get cs5 from here:
    http://www.adobe.com/downloads/other-downloads.html
    lightroom from here
    (it says updates, but they are the full versions. for example if you have lightroom 4, install the version 4.4.1)
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • MacBook Pro Hard Drive Crash? Grey Screen

    My MacBook Pro A1278 started running a bit slow today. It appeared to lock up, so I decided to restart. Upon restart after the chime, I now only get the grey screen - first with the apple symbol and processing circle, and then later the "no admittance" symbol. No cables or external components are connected.
    I started by trying the boot to the disc in safe mode but it wouldn't boot up. I received "cannot mount root, errno = 19".
    I then proceeded to reset the NVRAM / PRAM. Still, no boot up.
    I then attempted to repair the disc with repair utility using command + R. The disc is "verified" per disc utility but I receive the error "Error: Live file system repair is not supported" when trying to repair the full disc. When trying to repair the MacBook partition I receive the error that "Error: Disc Utility can't repair this disk... disk, and restore your backed-up files".
    I have a time machine backup but unfortunately it's from several months back. Any suggestions on how I may be able to recover my more recent data? Is the disc toast? Would a reinstall of Mac OS X Snow Leopard help? I was running Maverick before the crash but don't have a physical copy of the recent OS updates.
    Any help would be greatly appreciated.

    Your disk drive is either badly corrupted or is dying. I suggest you try:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.
    If you are unable to do this, then:
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Late-2008 Macbook Pro Hard Drive Swap Issues

    I recently bought a new WD Scorpio 500 mb internal hard drive and I was in the process of restoring things from my external hard drive. At the very end of the restoration, the prompt to restart my macbook pro came up on the screen so I went ahead with the restart. After restarting, however, the apple logo would show but after a few seconds a prompt appears saying that my computer needs to restart. This has occurred ever time after restarting so now I'm confused as to what I did wrong. Please HELP!!!

    Kernel Panic:
    http://support.apple.com/kb/HT1392

  • New Macbook Pro hard drive crash after 9 months?  How to avoid it again...?

    Hi - I've just had my hard drive replaced after it crashed - only after 9 months!!!!  How can this be?  I thought Macs were supposed to be more resilient and reliable?   I always kept the software up to date.
    Is there anything I should be doing to avoid this happening again?  
    - let the battery run down completely / always keep it charged and power source plugged in?
    - don't run too many programmes at once?
    - shut down completely rather than sleep mode?
    If anyone has any tips / advice...otherwise I'm considering selling it.
    Thanks

    You can't just take that drive from the older system and install it in the new system. Even though both run Lion the Lion install on the older system does not have the correct driver set for the new hardware. In fact Apple came out with a newer version of Lion Just For these Newer System.
    It may now be on the Apple servers bot it wasn't a few days, 5-12, ago..

  • IMac Hard Drive Crashed - Need to get music from iPod to new hard drive

    The 250GB hard drive on my iMac crashed - totally fried. It's been replaced and the operating system and software reinstalled. The problem - I have 22GB of music on my iPod (5G, 60GB) that I'd like to get back onto the computer. All music is legal - ripped from my library of 500+ CD's. The iPod is already set to manual updates and for use as a disc drive.
    Someone please tell me there's a way to do this without having to rip all 500 CD's again...

    Check this link for lots of solutions for that:
    http://www.ilounge.com/index.php/ipod-software-mac-osx
    If they are songs you purchased plug your iPod in and in iTunes select "File > Transfer Purchased Music From iPod".

  • I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

    I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

    The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
    http://eshop.macsales.com/item/HGST/0J28001/
    Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
    Ciao.
    Message was edited by: OGELTHORPE

  • I'd like to replace my hard drive.  How do I know what to buy for my 15-inch early 2008 MacBook Pro?

    I am out of room on my hard drive.  I'd like to get a new hard drive and restore my data to the new drive from Time Machine.  How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro?  Also, how hard is this to do? 

    I have changed HDDs several times on the old MBP.  Currently it has a Hitachi 500 GB HDD that came out of my new one.  My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice.  Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD.  I will be very surprised if there are compatibility problems.
    If you bought the HDD from OWC, you should have received Installation instructions.  If not, go to the OWC website and look at the video.  I actually downloaded it so that I could hand write the instructions down step by step.  Also check out iFixit website.  They have step by step instructions that may prove to be useful.
    Tools you need:  00 Phillips and #6 Torx Drivers (get good ones).   The instructions make mention of a plastic pry bar (spudger).  I use a stiff piece of plastic like a credit card.
    Tips to keep in mind:  Get a large open table space and place a large clean towel on it.  That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
    As you take out a set of screws, keep them together (I use wide masking tape.  The little screws will stick to it.)
    Keep the sets in sequence.  That will make reassembly much, much easier.
    The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board.  In case of the former, work from the back (the display) to the front.  You will initially have to pry it up and then do a lot of jiggling to remove it.  Don't be too timid about it.  At the end of the ribbon cable there is a rectangular connector.  Use your credit card to remove it.  Just pry it off.
    The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think).  If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
    Good luck and make sure that you don't have parts left over.
    Ciao.

  • My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2.  USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head.   The fastest speeds you can typically get are about 300 Mbps.   Firewire, on the other hand, has very little overhead.  The fastest speeds you can get are very nearly 800 Mbps.  You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus.  Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it. 
    Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance.  A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
    USB 2 will work perfectly fine... just not as fast.
    Also... it's much safer to move the entire Aperture library than to "relocate masters".  Your images must be managed.  You can Aperture manage them, or you can manage them.  But someone has to manage them.  If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge.  If you do, you'll break the links to your masters and start having problems with missing masters.  If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
    Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.)  There are only two kinds of hard drives in the world:  (1) those that have failed and (2) those that are going to fail.  There are no exceptions to this rule.  Hard drives are cheap.  Backup software is built into Aperture and into your Mac.

Maybe you are looking for

  • Report generation: Using only bottom border cell in Excel

    I'm trying to write a report to Excel. for each 2 rows I want the cells to have a bottom border. With the VI " Excel set Cell Color and Border VI" I have 2 options, using inside border and outside border. Outside border seems to be the top and bottom

  • In BI report each heirarchy node need to be heighlighted with color or bold

    Hi , I have a report called 'Project overview report' which is displaying data based on WBS Element heirarchy . I need each heirarchy node to be heighlighted with color or bold letters. Can any body help me. Regards, Jagadesh N

  • Where did catalog paths go in File Open Recent in Lr3??

    In Lr 1 & 2, File >> Open Recent shows you a list of your recently-opened catalogs, INCLUDING the path for each one.  I just upgraded to Lr 3 and only see the catalog NAMES are listed under Open Recent... and no paths.  I don't see any option to turn

  • WebDynpro and Business Workflow

    Hi there, I am planning on building a Form/Simple UI with WebDynpro to trigger a standard SAP 3-steps Workflow. My questions are: 1) What's the easiest way to trigger to workflow in WebDynpro? 2) Are there any standard WebServices that I could call t

  • Can't open files from the 'net...

    Whenever I try to open a file downloaded from the net, it opens with TextEdit...same thing with radio station add-ons...how can i stop/fix this?