Early 2008 Macbook won't boot after 10.7.5 update?

Updated to 10.7.5, when it rebooted to do the install, there was an error message, and now the machine won't boot.  Stuck on grey screen with spinning wheel.... reset PRAM, Disk utility says drive is OK... still no luck. ??
Looks like this has hit the news.  Any update from Apple?  I would take it to the apple store, but there's a mob becuase of the new iPhone, so..... yea.
Apple, please fix this.  And bring back Google Maps to IOS while you're at it.

Updated to 10.7.5, when it rebooted to do the install, there was an error message, and now the machine won't boot.  Stuck on grey screen with spinning wheel.... reset PRAM, Disk utility says drive is OK... still no luck. ??
Looks like this has hit the news.  Any update from Apple?  I would take it to the apple store, but there's a mob becuase of the new iPhone, so..... yea.
Apple, please fix this.  And bring back Google Maps to IOS while you're at it.

Similar Messages

  • My early 2008 MacBook won't wake up from sleep

    My early 2008 MacBook won't wake up from sleep periodically. I will have to hold the power button down and then restart when it acks up. It did this twice yesterday & once today.

    Try resetting the PMU (power management unit).
    Remove battery and power adapter.
    Hold down power button for 10 seconds.
    Reinstall battery and attach power adapter.
    Hold down Command-Option-P-R, a total of four keys, and press power button. Don't release the keys.
    Continue holding the four keys until you hear the startup sound twice, then release.

  • Computer won't boot after installing latest iTunes update

    Won't boot after the apple screen.  Turns black and disk stops  Help!  Was running Mavericks.

    Hi Neodoc,
    Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    I hope this helps,   
    -Joe

  • My Mac Pro won't boot after installing the latest update

    Im running the latest OSX on my mac and recenty did a small updated that i believe contain a few security thing and bug fixs but when restarting the machine after the update it would not boot again after the apple logo has appeard apple script is displayed on the screen contain what i think is boot script failing to run. I have been able to boot the system in safe mode. does anyone have and solution for this as i realy don't want to reinstall the OS
    Thanks

    The most common cause for "Won't boot after software Update" is Directory Damage that existed before the Update, but was made worse by adding files during the Update.
    The most common cure for that Directory Damage problem is to boot in Safe Mode, which takes five minutes to repair the disk, then comes up demanding your username and password, even if you normally auto-login.
    Rarely, third-party add-ons are made obsolete by an update. In this case, booting in Safe Mode (with few Apple extensions and NO third-party extensions loaded) works fine, even if normal mode does not work.
    Have you tried normal mode again after your Safe Boot?

  • Macbook won't boot after installing Security Update 2008-007 (Intel)

    I installed security update 2008-007 (intel) on my MacBook last night using Software Update, but now my machine won't boot at all. All I get is the gray start-up screen with the dark gray apple, but there's no spinning progress bar or anything. After 5 minutes or so, the machine auto-restarts, but again hangs on the gray start-up screen. It does this over and over again until I shut it off. I tried to boot into safe mode by holding down shift right after the chime, but it still wouldn't boot (again, not even a spinning progress bar). Can anyone please help me? I really don't want to lose my photos/movies, etc. I'll backup everything promptly if I can just get it to boot. Thanks.

    Hi jared-lee, and again, a warm welcome to the forums!
    First for safety, "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    This may or may not fix the problem, but may.
    Do you have another Mac around?

  • MacBook won't boot after updates

    My girlfriend has a black 13" MacBook and we ran updates on it today and after it had installed all the updates and it went to reboot it now won't boot up. It turns on and you see the apple logo but then it comes up with a window saying that it needs to be restarted and in the background there is a few lines of "code." I am a PC user so I am doing my best to help her resolve this problem. I do love my iPhone and iTunes so don't hate me too much haha. I did some research on here and read how to boot up in safe mode and I tried to do this but it didn't work. Any help would be greatly appreciated.

    She bought the computer used so unfortunately she does not have the start up disk. She also has not backed up the information on the computer but we are more concerned about getting the computer to work because she cannot afford to buy a new one and she has barely had this one more than a year. The only thing that is connected to the computer is the power cord and the battery is shot so we cannot disconnect the power cord and use the computer. Well I read the instructions on starting up in safe mode so I hold the power button until I hear the obnoxious beep and then hold the shift key down until u see the little gear thing and apple logo. Well I get the apple logo but no gear and then I get the pop up window that I spoke of before telling
    Me to restart and there is the lines of "code" in the back ground.

  • Early 2008 iMac won't boot up

    My early 2008 iMac was getting slow. It didn't really seem to have anything wrong with it other than being a 5 yr old middle of the line model with 4 GB of ram. But I decided it was time to upgrade and so bought a new iMac. After transfering files & apps to the new computer, I shut down the old one and moved it. I used it in my piano teaching studio, and so was intending to set it up for students to use. When I went to boot it up, however, it wouldn't. I unplugged it (from the computer and the outlet), then plugged it back in after a couple of minutes with no luck. I was told some time ago you didn't have to do this, but not knowing of anything else to try, I unplugged it again and then tried pressing the power button as I plugged it back in. No luck.
    Any thing else I might try before taking it to the Apple store and seeing if they can start it?

    Thanks for trying. I'd rest SMC before, but did it again just now with no luck. One thing that's weird is that since I moved it, the power cord, keyboard usb cable and wireless mouse usb transmitter have been difficult to remove. I actually had to get a pair of pliers to remove the transmitter (gripping the transmitter firmly but gently through a cloth so as not to damage it). I don't know if that would have anything connection to it not starting (I can't imagine how), but it's a notable change.

  • Macbook won't boot after Airport update, stuck in single user mode

    Wasn't sure what forum to put this in, so I'll start here. After re-imaging student machines from the server, for some reason the new Macbooks no longer recognize they have an airport card. On another machine I download the appropriate Airport software, copy to thumbdrive, and install on student laptop. After required reboot, the Macbook refuses to boot into OS X- I get the grey apple logo, spinning gear, then drops to what appears to be single user mode, with the exception that it seems to be "refreshing" itself constantly with messages appearing for brief moments (too fast to read). It cycles so fast that I can't type anything before it is gone again. If I purposely boot into single user mode, everything behaves as normal, if I mount as fire-wire drive, everything looks good. But I can't get into OS X. Before I brick more student machines, have any ideas?

    Some added info, i CAN boot the bricked machine into Safe mode, but at reboot I get stuck in the same cycle again.
    Oh, and in SafeBoot, the Macbook still tells me that no Airport card is installed, even though I know it does (and it's not knocked loose or anything).....

  • Macbook won't boot after time machine backup

    I installed a program on my Mac that was causing some problems so I decided to do a time machine restore. I booted into recovery mode, selected restore from time machine backup and let it run. It finished completely but it gets stuck at the startup screen. I get halfway on the loading bar and it does not progress past there. I've waited up to an hour.
    I am running Yosemite on a mid 2009 macbook. I am using a SSD and I know with trim enabled it sometimes won't boot up but I disabled it via terminal.
    I've also ran disk utility on my HD and on my external HD. I'm getting no errors on both.
    Anyone have any ideas?

    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Macbook won't boot after ime Machine restore

    I powered my laptop on last night and it would not boot. It just sits at the Apple log and spinning disc. I tried the usual recovery options fsck, disk utility, verify disk, etc. They all failed with different errors.
    I tried restoring my Mac by booting with the Install DVD and pressing C. When it came up I tried restoring from Time Machine backup (not sure the exact name) It allowed me to select my Time Machine backup drive and proceeded to restore. It said the restore was successful and I needed to reboot.
    After reboot it does the same thing. It won't boot.
    Additional information: I have also tried a fresh install and it works fine, but then it won't see my Time Machine data to restore from. I figure this eliminates the hard drive as a suspect, and points to Time Machine being hosed up.
    The laptop had not been restarted for about two weeks and I know there has been at least one Update since that time. Is it possible that the update broke it and as soon as I restarted it loaded the new broken files? And is it possible that my Time Machine restore is just restoring these broken files?

    Yes, thanks this is all helpful information.
    I tried restoring to older restore points and the TM restores work fine and the Mac boots up ok. I had to restore three more times to find the most recent backup that would still boot up ok.
    Lesson learned here is to make a mental note of when updates are applied as well as when the laptop has been rebooted.
    Now I still have two problems.
    1. The backup drive only has 11GB free space so I can't really archive the old backup in case something was missed. Any unless I am missing something I can't search the TM backup for ALL files modified after a certain date and then copy them over. This means that I have to browse folder by folder looking for new files and copy them over BEFORE wiping out the old backup and starting a new backup again.
    2. TM over WiFi is VERY slow and it will take 3-4 days to get the new backup completed. This makes me nervous knowing I have to delete my existing good backup to make room for the new backup to begin. What if TM fails or some other bad luck happens before the backup is complete.
    I guess my big question here is whether there is an easy way of backing up TM connected via USB then move the drive to my APE and continue using WiFi. Last time I looked into this you had to make a copy of the sparse file and modify it. Once again this does not work because there is not enough space for TWO full backups of a 300GB drive with about 200GB of data. I have over 1TB of drives being used for backups of other computers so it's not like I am being cheap and just don't have the space. I have a 500GB for my desktop backup, a 320 for my laptop backup and a 120 for my other laptop backup. guess I could just go throw more money at it and get two 1TB drives so one could be the local backup of all these computers and have the other at an off site location using CrashPlan to also backup all the drives.

  • MacBook won't boot after Software Update

    I was installing the updatess for iTunes and QuickTime. The software sucessfully installed and asked to restart. Upon Restarting, my MacBook would not boot.
    Nothing is displayed on the screen, but the CD drive checks for a disk and the backlights come on.
    I tried the basics, those didn't work. Does any one know a solution?
    Thanks

    Thanks guys.
    I had tried resetting the PMU, booting to safemode (I don't know much about EFI, but I don't think it was even posting to let me have the option of how to boot), opening the command line interface (cmd, opt, o, f), and a few other small things.
    I did get it fixed though. Turns out the PMU needed to be reset (I must have been doing it wrong). I think a few OX X files as right-clicking is weird (nothing highlights on the menu as I move my mouse across them) and access vault won't complete the disk saving. I plan on doing a re-install of OS X sometime soon.

  • Windows 8 on 2008 Macbook - Won't Boot

    I'm running Lion 10.7.5 on my late 2008 13" Macbook.  With BootCamp 4.0.4 I installed 64bit Windows 8 Pro.  I had to manually format the partition to NTFS in Disk Utility, as the default is FAT 32.  The install seemed to complete, but on reboot, nothing.  Just a flashing cursor in upper left corner on a blank screen.  Rebooted again:  same thing.
    Will Windows 8 run on a 2008 MacBook?  How do I make it work?
    Thanks.

    Windows 8 is not supported by Boot Camp

  • MacBook won't boot after resetting memory

    Hi
    In preparation to upgrade my MacBook's RAM to 2 or 4Gb I took out the existing RAM to see what I had and then replaced it. Now my Mac won't boot properly. It's a dual partion disk (OS X and Vista) and I can boot and run the Vista partition AOK. I can also boot from the Leopard install disk.
    When I boot into the Mac partition I get the Apple sign and the spinning pinwheel, then the screen goes light blue and it stops - no mouse, no dock, no nothing. I have to press and hold the power button to switch it off.
    In Vista and when booting from the install disk I can run utils that show me clearly there are two 512Mb memory cards installed.
    Anyone have any ideas?
    I do have a time capsule and time machine running in worst case...
    Thanks
    Colin

    Hmm... so all you did was take out your RAM and put the same RAM back in? Something may have become corrupt in your PRAM. You can find instructions on how to reset it here:
    http://support.apple.com/kb/HT1379
    It can sometimes help with problems like this. Also... even though Vista sees both modules, that does not necessarily mean they are fully seated. You may want to try removing them and putting them back in to see if it makes a difference.

  • G4 450 MP won't boot after 10.4.8 update

    My main disk is a 160Go on a PCI IED card (acard)
    After Software update did its thing, the computer won't boot on this disk.
    It displays the apple logo, then nothing (no spinning thing). There are display artifacts (blanck line on top of screen, sometimes the grey background turns blue)
    I tried zapping the PRAM, reinstalling the combo update, removing third partry cards to no available.
    I tried plugging the disk on the integrated IDE channel (but I know my computer does not support disk larger than 120 Go)
    Any one has an idea ?
    G4 450 MP   Mac OS X (10.4.7)  

    I verified and repaired permissions on both disks, updated the new system to 10.4.7 and ran Migration Assitant, which, aside from giving wild estimates of time remaining and not copying the Developer folder, did indeed work magnificently. Not going to bother with cloning back to the original drive.
    Gulliver:
    1)Umm, yes, I didn't bother repairing permissions before updating to 10.4.8, but the only way to know if that caused the problem is to try updating the new system. I'm not that curious. I think scb is not impressed with repairing permissions.
    2)Removing 3 PCI boards and swapping the processor and then putting it all back together everytime there is a system update is not an option. Besides, if it doesn't work with the 3rd party hardware, then I wouldn't want to bother updating anyway. Next time, I'll try updating on another drive first.
    Anyway, everything is running well again. Thank you for your help.

  • Imac won't boot after 10.6.8 update

    Not sure where to start with this...
    Just tried to boot after the latest 10.6.8 update and have the grey screen with the spinning disk.

    I would suggest that you do the following as a start:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the drive is OK then download the Mac OS X 10.6.8 Update Combo installer and reinstall the update. See if that resolves your problem.
    If the above does not fix the problem then you will need to reinstall Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Maybe you are looking for