Early 2011 MacBook Pro logic board upgrade question
I have an early 2011 MacBook Pro 17'. Will a late 2011 logic board fit in the unibody of an early 2011? My logic board crashed and I'm looking to install a new one myself. I just need to see if I can upgrade mine at all. I want to purchase a logic board with a faster processor and hopefully not as prone to the GPU failure. Any recommendations?
You have the problem discussed in a number of discussions on this forum, most notably here -> https://discussions.apple.com/thread/4766577?tstart=0.
Basically the GPU in the machine was poorly soldered onto the logic board. If you take the machine into an Apple Store, they will recommend a logic board replacement. This, however, will not permanently fix the problem. The only permanent fix is to have the GPU 'reballed' - this will cost about $160 and some services offer up to a year's warranty on their work.
I had the problem back in January and, as I was under AppleCare, had my logic board replaced gratis. Once I'm left with no warranty, I will have the GPU reballed.
Take a look at some of the discussion and see some of the photos which are just like yours. The only remedy is the reball.
Good luck,
Clinton
Similar Messages
-
Early 2011 Macbook Pro logic board
Hi guys,
Can anyone tells me what's wrong with my macbook? It happens this almost every week. Once the mac is hang, restarted the mac again and it went to a grey screen hang there and my RAM runs very loud. I can't login and try to on and off again for at least 8times.
If its the logic board, any knows how much would the logic board cost in dollar? Would you recommend me to get a Retina display 15'inch ?
My mac spec :
2.3 GHz Intel Core i7
Memory 8GB 1333 MHz DDR3You have the problem discussed in a number of discussions on this forum, most notably here -> https://discussions.apple.com/thread/4766577?tstart=0.
Basically the GPU in the machine was poorly soldered onto the logic board. If you take the machine into an Apple Store, they will recommend a logic board replacement. This, however, will not permanently fix the problem. The only permanent fix is to have the GPU 'reballed' - this will cost about $160 and some services offer up to a year's warranty on their work.
I had the problem back in January and, as I was under AppleCare, had my logic board replaced gratis. Once I'm left with no warranty, I will have the GPU reballed.
Take a look at some of the discussion and see some of the photos which are just like yours. The only remedy is the reball.
Good luck,
Clinton -
So I have an early 2011 MacBook pro, I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on. I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
I should note, I replaced both the RAM and the harddrive in my Macbook pro. I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
Also I should note I replaced my harddrive. I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's. I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items) The harddrive has been working just fine since then.
In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
Now here is my issue. I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
I know this issue has been posted elsewere but it said answered and the answer is no longer available. I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue. I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
Let me know If there is anything I can do. I'm a now broke college student so i'd like to spend as little $$$$ as possible
*PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues withBrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
Has anybody heard if Apple is going to fix the Logic Board on the early 2011 Macbook Pros for Free?
Has anybody heard if Apple is going to fix the Logic Board on the early 2011 Macbook Pros for Free? Of course my Apple Care warranty expired months ago, and this just happened. I've been looking online for solutions. But am wondering if anybody has heard if Apple is going to take care of this, or what others are doing to get Apple to repair this problem without having to pay $1,000!!!!!!!!!!!!!!!
I know this is an old post but just in case it helps. They ARE fixing certain macs for free!
https://www.apple.com/au/support/macbookpro-videoissues/ -
I have a early 2011 MacBook Pro upgraded to mavericks and windows 7 install cd what do I need to install bootcamp properly? I have the bootcamp assistant in my utilities folder but do I need an older version it's the 5. Something from mavericks and which drivers do I need my my computer?
Boot Camp Assistant is already installed.
Boot Camp 5.1- Frequently asked questions
Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp- Frequently asked questions about installing Windows 8
Boot Camp- Installing Windows 7 Frequently Asked Questions -
I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.
-
My 2008 Macbook Pro logic board failed...am I still able to copy that hard drive onto my 2011 Macbook Pro hard drive?
What you can do is to extract the hard drive from your old computer, put it in an enclosure and connect it to your newer computer, so you can restore your data.
It's not too difficult to do it yourself, but if you think you will do something wrong, take it to a store where you can get your data restored -
I have an early 2011 macbook pro 13" running 10.6.8, if i upgrade to osx mavericks 10.9.1 will I still be able to run powerpc applications?
Welcome to Apple Support Communities
Mac OS X 10.6.8 is the last Mac OS X version that supports PowerPC applications, so if you upgrade to OS X Mavericks, you will lose the ability to use PowerPC applications.
I recommend you to look for upgrades to those apps, but if you cannot or any of your apps are not available for Intel-based Macs, a different option you have is to create a second partition and install OS X Mavericks there, so you can still use your old apps by starting up into Snow Leopard. To create the partition > http://pondini.org/OSX/DU3.html -
Early 2011 MacBook Pro- The thermal paste discussion.
It is my goal to clear up the questions and concerns Apple customers have been having regarding heat or fan related concerns with Early 2011 MacBook Pros. If your MacBook Pro was produced within the last few months the thermal issue has been resolved and it will likely not be in issue for you. If you are still wondering if your computer is effected or what the real issue is keep reading.
The MacBook Cools itself by 2 main methods: active and passive. The active cooling is via a fan that blows air through a heatsync and into a tube called a heat pipe which leads to the back of the computer where the hot air is discharged through a vent at the bottom of the screen behind the hinge. The fan lowers the air pressure inside the case causing outside air is drawn in the case, displacing the hot air inside and helping to cool the other components.
The computer uses passive cooling to remove the residual heat from the processor which comes mostly in the form of radiant heat. Passive cooling is also used to cool the other components of the computer (memory, disk drives, battery etc). Passive cooling works by conductive heat transfer ie. syncing to the case of the computer. Some of the heat then is radiated. Some of it is transferred from the outside of the case via convective cooling; the foot pads on the bottom cover are designed to raise it up just enough to allow air underneath for convection to occur. (Convection is the process in which hot air to rises and is displaced by cooler air.) The rest of the heat from the bottom cover is absorbed by whatever surface you have the computer on.
The processor will not sync to the case very much if the board is assembled properly however the other components of the computer will, requiring the case to be in open air to allow for passive cooling to take place.
If you have some sort of covering such as a plastic snap on case it will likely interfere with passive cooling in all of it's 3 of it forms, this will cause the computer to be abnormally hot. I recently saw someone in the Apple store with a MacBook Air experiencing abnormal heating due to a plastic snap case so this particular problem is not unique to MacBook Pros and it is not the cause of the issue being discussed here. I do not recommend the use or anything that covers the computer while it is running with the exception of something that covers the back of the display panel only. If you are worried about your computer getting damaged go and buy a laptop insurance policy from Worth Ave group. The insurance does not cover cosmetic damage or misplaced items but will cover accidental damage including spills. This insurance also covers theft, vandalism and natural disasters, is quite inexpensive and the claims process and deductible is similar to most phone insurance plans (which they also offer).
User induced overheating can also occur when the computer is placed on an improper surface such as a couch cushion, car seat, bed, pillow etc. Doing this can interfere with both passive and active cooling.
As I mentioned earlier In all likelihood if your computer was produced after May it is not affected. I personally have been in posession of 3 MacBook Pros, one produced before May which had the problem, one after which had no problems and one produced more recently that has mind blowing thermal performance way beyond all of my expectations.
So the question at this point is exactly what is the problem, how can it be diagnosed and how can it be rectified.
After extensive research and testing I have determined the issue to be related to improper application thermal paste. I involuntarily became involved in this pursuit as a result of the problems I was experiencing and I did not initially come at from an objective viewpoint but rather one of cautious skepticism. I had anticipated before purchasing my computer that there may be a thermal issue. This anticipaion came as a result of reading an article on ifixit.com about the disassembly of the brand new early 2011 MacBook Pro. When the technician performing the disassembly removed the main heat sync he expressed concern about how much much thermal paste was present, expressing that it seemed excessive. This lead the technician to question wether or not it would cause heating problems.
Proper application of thermal paste is critical to the functionality of the active cooling system and when applied improperly will not properly transfer the heat to the heat-sync which in turn gets cooled by the fan. Proper application of thermal paste insures the heat is removed from the case as efficiently as possible. Doing this both reduces the speed at which the fan needs to run in a lot of situations and prevents too much heat from the processor needing to be cooled by passive means. If is is not applied properly it will eventually lead to overheating of the case as well as the other components of the computer. This can cause damage firstly to the computer's battery and can also significantly shorten the life computer. (Or any other kind of electronic device for that matter.)
The problem can be diagnosed by testing the computer using a program called System Load or any other software that will put your computers proscessor use up to its maximum and keep it there indefinitely. Placing full load on your GPU at the same time during the test is also recommended. Keep in mind, if you are using your computer the fan will spin up if needed for additional cooling. You should expect the fan go up to its maximum speed during the test, it is not in of itself an indication of a negative result. Make sure to have the computer plugged in, fully charged and on a proper surface. A desk or other flat surface should be fine. Exceptions would include the top of a refrigerator since it has insulation just underneath the metal exterior or any surface that is heated by any means such as a dryer or other appliance.
(The temps to follow are in ºF)
Run the test for up to 1 hour. If the case of the computer breaks 93 degrees your unit is likely affected. Expect the unit to even possibly reach temps approaching and exceeding 100º, if this happens immediately abort the test. Also look for the processor temp shooting up to around 180 in the first 30 seconds and the fan spinning up right away. Typically on a properly functioning unit the temperature of the case will end up being somewhere in the neighborhood of 88-91º. If this test is preformed in a room with a normal ambient room temperature of about 68 degrees. Even after an hour the case of the computer should not be significantly hot, just warm to the touch. On a normally operating unit the fan will start to kick in within 90 seconds or so and may not reach full speed even after several minuets.
At one point the case of my computer actually reached 95º during normal web browsing.
This is a problem that I have had successfully corrected twice by reapplication of thermal paste. The first time was on a machine produced prior to may and the second was after a logic board was replaced at the repair depot. (I suspect the inventory turnover is lower for boards than whole computers resulting in a board from the initial production run being installed in my computer.)
If you forget everything I just wrote remember this. #1 if you are using your computer hard enough the fan will end up running at high speed at some point. #2 This problem is not in any way related to the design of the MacBook Pro, or its use/application. #3 This mostly not a problem of the CPU being too hot; these Sandy Bridge CPUs are rated for 212ºf and will routinely be in the neighborhood of 200º, this is hotter than other chips but well within design limits. #4 I have done everything in my power to make sure that this problem has been corrected and I have every logical and evidenced based reason to believe it has been resolved in machines produced after may. #5 This is not an Apple acknolidged issue. Technicians will tell you that there is no problem because these higher temps are normal and within operating limits and if they weren't the machine would shut itself off. (This is a bit extreme; just like a lot of other devices such as electronics, toaster ovens and space heaters with thermal overload protection this automatic shutoff is intended to occur when damage or risk of fire is imminent because the device is WAY outside of normal operating paramaters.) They will also not tell you when asked what these limits are, that they know what they are or in some cases that such figures they even exsist.
I stake my personal and professional reputation on the accuracy of my findings, it is my job as a private consultant to help my clients to resolve complicated and expensive issues just like this one.
Bottom line if you are having a problem and Apple won't fix it on warranty don't ditch your machine, just pay to have it done yourself. In most cases you can pay have it done at the Apple store. It will probably cost you less than 100.00, and it will not void your warranty as long as the work is done by Apple certified technician. It will be well worth it; after all in spite of this MacBook Pro's are hands down the best portable computers on the market, with an industry leading warranty and support to back it up. On it's worst day Apple's service and support is better than any computer/ consumer electronics company, even on its best day.
I hope this helps to clarify this issue! I also hope it will help anyone affected to resolve the problem instead of resorting to a refund and settling for something else.hello all
you can try this:
Go to system preferences > settings > built in display > see bottom of window.
check "show mirroring options in the menu bar when available". then click "airplay display" > and select your device.
That's what happened to my MBP - 15-inch, Late 2011 model. -
Early 2011 MacBook Pro shutting off all by itself
Early 2011 MacBook Pro 11" shutting off all by itself recently.
I had the logic board replaced 11 months ago because it started to shut off more and more until it refused to boot up again.
Now I am going through the same problem. Is this common?OK, in that case:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.
Upgrading to Lion or Mountain Lion will not solve the problem. -
I know this question has been asked before. My problem is similar to what is mentioned here but I hope someone can explain the error log attached below and hopefully I'm able to find a DIY solution without much cost.
I'm using a early 2011 MBP with Yosemite installed. Not too long ago, I manually upgraded my hard disk to a OWC SSD.
Recently my MBP screen went into white blank screen AGAIN while I was working on a python script which crawls the web with about 10 threads. I used to run this same script without *much* problems before yosemite (ie: i encounter the same problem with Mavericks but not so frequent. I never install mountain Lion before so I can't comment on that. I came from Snow Leopard to Maverick and Yosemite). Other times, my MBP will go into the same white blank screen while doing other misc stuff and this usually doesn't involved me watching any HD video.
A couple of solutions that get my MBP up and running are:
1) I hard shutdown and bootup my MBP. After the apple logo it freezes at the white blank screen. While it stays in the white screen, I will unplug my power adapter and wait for my battery to drain out completely. Once the battery is completely drained out, I will plug in my power adapter and I'm definitely able to boot up my MBP without any problem the first time. I did the same and thus I'm able to post this question.
2) Bootup into safe mode and restart. It works once
3) I have also disabled dynamic switching of graphics card but that didn't work.
Below is my error report. I don't quite understand it. I hope someone explain to me?
Wed Nov 26 23:00:48 2014
*** Panic Report ***
Machine-check capabilities: 0x0000000000000c09
family: 6 model: 42 stepping: 7 microcode: 40
signature: 0x206a7
Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
9 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7fa25f70af
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7fa25f70af
IA32_MC3_MISC(0x40f): 0x000000000003ffff
panic(cpu 0 caller 0xffffff802161f12a): "Machine Check at 0xffffff7fa25f70af, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010bd43000, CR3: 0x0000000018e1e03e, CR4: 0x00000000000626e0\n" "RAX: 0x0000000000000000, RBX: 0x0000000000000040, RCX: 0xffffff814f6e042c, RDX: 0xffffff814f6e0340\n" "RSP: 0xffffff812ae23898, RBP: 0xffffff812ae238d0, RSI: 0x0000000000000004, RDI: 0xffffff812b337fd8\n" "R8: 0x0000000000000040, R9: 0x00000000ffffffff, R10: 0x0000000000000000, R11: 0xffffff812b337eec\n" "R12: 0x0000000000000012, R13: 0xffffff812b2d7fd8, R14: 0x0000000000000040, R15: 0xffffff812b2d7fec\n" "RFL: 0x0000000000010202, RIP: 0xffffff7fa25f70af, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/trap_native.c:168
Backtrace (CPU 0), Frame : Return Address
0xffffff81034d5cf0 : 0xffffff802153a811
0xffffff81034d5d70 : 0xffffff802161f12a
0xffffff81034d5ed0 : 0xffffff802163acef
0xffffff812ae238d0 : 0xffffff7fa25f91ec
0xffffff812ae23920 : 0xffffff7fa25fbd85
0xffffff812ae23940 : 0xffffff7fa25fc241
0xffffff812ae23990 : 0xffffff7fa22bd0bb
0xffffff812ae239d0 : 0xffffff7fa22bfcb4
0xffffff812ae23aa0 : 0xffffff7fa22c5190
0xffffff812ae23ac0 : 0xffffff7fa22c50dd
0xffffff812ae23ad0 : 0xffffff8021ad8008
0xffffff812ae23b30 : 0xffffff8021b01c92
0xffffff812ae23b60 : 0xffffff8021b02859
0xffffff812ae23bc0 : 0xffffff8021b00003
0xffffff812ae23d00 : 0xffffff80215ea517
0xffffff812ae23e10 : 0xffffff802153e91c
0xffffff812ae23e40 : 0xffffff80215235a3
0xffffff812ae23e90 : 0xffffff8021533e8d
0xffffff812ae23f10 : 0xffffff802160a142
0xffffff812ae23fb0 : 0xffffff802163ac66
Kernel Extensions in backtrace:
com.apple.iokit.IOHIDFamily(2.0)[917971EF-5947-3DF5-BB9F-D353D05C0484]@0xffffff7fa229b000->0xffffff7fa2310fff
dependency: com.apple.driver.AppleFDEKeyStore(28.30)[3BAA7FEE-7EF3-3A9A-A0B1-902A4AB7171F]@0xffffff7fa2290000
com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0xffffff7fa25ef000->0xffffff7fa2629fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff7fa1d24000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000021200000
Kernel text base: 0xffffff8021400000
__HIB text base: 0xffffff8021300000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 44905012498
last loaded kext at 7194739946: org.virtualbox.kext.VBoxNetAdp 4.3.12 (addr 0xffffff7fa4795000, size 28672)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.3.12
org.virtualbox.kext.VBoxNetFlt 4.3.12
org.virtualbox.kext.VBoxUSB 4.3.12
org.virtualbox.kext.VBoxDrv 4.3.12
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 267.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 267.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.kext.AMDFramebuffer 1.2.8
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.AMDRadeonX3000 1.2.8
com.apple.iokit.IOBluetoothUSBDFU 4.3.1f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleLPC 1.7.3
com.apple.kext.AMD6000Controller 1.2.8
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.CoreStorageFsck 471
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOSurface 97
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.kext.AMDSupport 1.2.8
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: OWC Mercury Electra 6G SSD, 240.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1Hi all, I had many problems with the GPU of my Early 2011 MacBook Pro and the MLB was replaced three times so far. The first time was about a year ago and I went to an authorised retailer and not to an Apple Store. They first incorrectly diagnosed the problem and told me that they had to replace the hard drive. After that, they still did not really find the problem but said that the MLB had to be replaced, which I did given that my computer was only two years old and running fabulously. About a month later the problem reappeared and the MLB was replaced again, this time by using the 3-months guarantee of the MLB. The first time I had to pay. A few weeks ago I again had problems (the computer was very hot and fans were running at maximum speed most of the time although I was running only Mail and Preview). I'm, I took it directly to the Apple Store and after about five minutes of looking at it they decided to replace in the MLB for free. There is no official replacement program but I think Apple has now recognised the issue and they don't charge you anything if you had the issue before (they call this a repeat repair). So good luck if you haven't solved your problem yet. If the problem reappears there should be no problem.
-
Early 2011 MacBook Pro - Pristine Condition - should I buy?
I'm a PC user -- not a conscious decision, just what I started and stuck with because it was easier. I've always salivated at the thought of having a Mac, but it was always cost-prohibitive.
HOWEVER, I' have the opportunity now to buy an early 2011 MacBook Pro -- standard 4GB RAM, 500 HD, non-retina, you MAC users know the specs without me spelling it out. This machine is in pristine condition -- they barely used it. Literally not a scratch on it. I took it for a diagnostic at a local computer repair store and they verified the battery and hard drive were in supreme condition. The seller was originally asking $750, but because she knows me she's willing to come down to my budget of $600. I've checked eBay selling prices and this seems fair especially considering the condition, but I thought I'd check with you experts first. My other real question is, I'm a photographer and would like to use this machine mainly for programs like Photoshop and the rest of the Adobe suite of products -- what kind of upgrades would I have to make to the machine so that those programs would run smoothly? The first things someone suggested was upgrading to 16GB of RAM -- that's an extra $200 right there. Would it be better to look for a newer machine?
Thanks in advance.Well I ran it here:
http://www.mac2sell.net/
Your Computer is a
MacBook Pro unibody 15 inch Intel Quad Core i7 2.00 GHz 4096 / 250 GB / superdrive
The Mac2Sell Quoted Valueis :
870 $
So if it is indeed a 2012 then that's a great deal. Did you verify that it is a 2012? Because there are issues with the 2011s. You can run the serial number here and verify the year:
http://www.chipmunk.nl/klantenservice/applemodel.html
I would at least bump the RAM to 8 GB and install an SSD from OWC:
http://eshop.macsales.com/owcpages/ssd-bootest-mbp-101112.html -
Early 2011 Macbook Pro - Black screen at random
I have an early 2011 Macbook Pro, running Mac OS X (10.7.5). Seemingly at random, the screen will go black and the only way to get it back is to hold the power button down. When it turns back on, everything is running as normal. It's been happening more and more frequently, so I'm wondering is this a problem I can fix on my own? Can it be fixed or is it just a glitch I should just deal with?
(Please explain everything to me as if I were a 5-year-old)Early 2011 15" Macbook Pro.
Add me to the long list of customers experiencing display issues. HUGE problems with a blank screen when waking from sleep and difficulty starting up (video glitches & hi fan speed). After about 6 months and 2 genius bar visits I finally did a complete HD wipe/clean install of Mavericks with all of the default settings.
The situation has improved only slightly overall, but at first things were great. I was confident I had it licked.
As I restored apps & profile settings things start to get wonky. The last install I did was Picasa (I thought this app was the culprit before the wipe). I successfully restored my Picasa settings and all was fine. I even closed the lid and when I opened it the next day the screen came right back on. Then I tried to sync my iPhone and BAM! Screen goes out and the system is hung (no response to keystrokes or sound events).
Power button shutdown.
Restarted and the Macbook hung as the previously opened apps reopened.
Power button shutdown again.
Restart this time was normal and everything opened just fine. The console logs show NOTHING indicate any issues or that the machine experienced a kernel panic or anything like that.
It's been 1 whopping 36 hours since my clean install and I've already crashed twice.
But now I use my Macbook with anxiety as I never know when it's going to crap out again. Maybe it's time I switch back to Linux on an inexpensive wintel laptop as I won't buy another Apple laptop if this is the what I should expect from a $2000 machine.
Incidently, I also have a 2010 MB pro which had dispaly issues and Apple replaced the logic board at no cost (out of warranty) as part of a replacement program. I've seen MANY forum posts suggesting that Apple should step up and provide the same level of service for the Early 2011 MB Pros... I tend to agree. -
I took my Early 2011 MacBook Pro into the local apple store and they ran their GPU test, and my Mac actually passed it. The Apple employee then ran a hardware test and the logic board, battery, and optical drive showed problems. The Genius told me about their flat rate $310 repair deal, and I am going to take advantage of it...
Today when I am able to boot up my mac it loads very slow (showing a beachball during start up) and then the window we get when pressing Command R shows up asking me to press enter for English, and then after that it shows options like Disk Utility, Restore from Time Machine backup, Reinstall OS X, and Get online help options...
I erased my drive (Crucial SSD) and restored from Time Machine backup, and I am still having this issue... Please help.Kappy hi, thanks again. I wiped the drive, reinstalled OS X, and transferred from Time Machine backup... Seems to be working better somewhat. I will just have to pay for flat rate repair for Apple to fix everything wrong, and hopefully it will perform like new... Again thank you.
-
I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.
If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.
Maybe you are looking for
-
I have done a windows full server backup on to an external Seagate HDD on a Dell PowerEdge T110 II Server running Windows Server 2008 R2 I want to clone this and do a Bare Metal Restore on an identical server at home which has Windows Server 2008 R2
-
Date preferences problem - Photoshop CS2 and OS X 10.4.6
I am running Photoshop CS2 9.0.1 on two Mac G5s (Mac OS X 10.4.6) and Photoshop CS 8.0 on a Mac G4 (Mac OS X 10.4.6) but now have a problem with the correct display of dates in File Info on the pair of G5s running CS2 9.0.1. However I configure the d
-
Orders on credit block for multiple times
Released documents are unchecked is set up deviation of 5 % and no of days 30 in OVA8 and use static credit check. customer is over the credit limit, when i create an order will go on credit block. After first release, if i change any other fields su
-
HT201274 Stuck in reset (iPod 5th Gen)
I tried to use the reset from the settings to completely reset my iPod to its factory defaults and now its stuck. Its been stuck for the last hour on the loading animation similar to what appears on the status bar when a page in safari is being loade
-
What is the difference between DCS.DynamicCustomCatalog and DCS.CustomCatalog ? Can we assign a catalog to a user using ACC, for example in ATG's CommerceReferenceStore can we assign only "Home Store Catalog" to a user ? ( Presently in CRS 10, which