Early 2011 MBP 17 Random Shutdown and Battery Behavior

Hi all, new to the forums here.
I recently purchased a refurbished early 2011 MBP 17' 2.2 Ghz i7 with 8gb and 10.7.5. Out of the box, machine looked great, but I noticed that the power cable was different than the one I had for my early 2011 MBP 15' I have for work. This raised an immediate redflag (buying from a refurb site outside of apple is always a cause for concern IMO) so I abstained from using that charger until I knew a little more. I plugged in the machine and booted it up and everything worked great. The batter was close to 100%, so after charging for approximately 20 min, I unplugged it, and the laptop immediately died. I powered it back on, and the harddrive began to spin for a few seconds, then the same result, total loss of power. Started up again, and I was able to boot into OS X and play around for a bit for a period of time before again, shut down.
For the next few days, same story. I was able to at one point, drain the battery completely and do a full cycle charge. The first time I did this, no change in behavior. Again, a few days later, I was able to drain the battery and perform a full cycle charge, but this time, a major change in behvior. Since the second full cycle charge, I have had absolutely no power problems. I haven't really "pushed" my MBP to see if fully utilizing the CPU/RAM/GPU will produce the similar results I had early, but it appears that everything is working great.
Here a few interesting notes to my situation.
When I was first operating the system (when plugged in, there were no shutdowns, only while on the battery) I pulled up my system report, and noticed that my battery cycle was very low (~5). This seemed odd, because I had opted for a used battery instead of a new one.
Prior to reinstalling Mountain Lion, my volume up key would trigger a few strange events. The screen for briefly get quite bright, then all open applications + the doc and widgets would restart (similar to killing explorer.exe in the windows task manager).
Since performing the fresh install, I have had abslutely no issue with my MBP and I love it, its a beautiful machine. However, as I purchased refurb, I'm hesitant to proceed (I will exceed my return period in ~2 weeks) without knowing my machine is in prime working condition. I have read issues about early 2011 models having issues with batteries and GPUs, but my symptoms were dissimilar to those described by others with those particular issues.
Any thoughts?
I have a genius appointment tomorrow evening for a general diagnostics check, but if others have experienced these issues, I would appreciate some input.

Do a SMC reset:
http://support.apple.com/kb/ht3964
Run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
You may need to use OPTION D to start it.
Install iStat pro and open Activity Monitor.  Set Activity Monitor to show 'All Processes' and '%CPU' to display values from high to low.  Post images of the two such as these:
Ciao.

Similar Messages

  • 13" MacBook Pro early 2011 model Randomly Shutsdown and Battery goes to Zero

    Hi,
    I have an early 2011 13" Macbook Pro that randomly shuts down.  It just happend to me when battery was plugged and fully charged. After it shuts down the battery indicator on the side of the computer shows one blinking green light.
    I have done a clean installation and problem persists. Any help will be greatly appreciated.
    Battery Information:
      Model Information:
      Serial Number:          W0********3BA
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          201
      Hardware Revision:          000a
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          1827
      Fully Charged:          No
      Charging:          Yes
      Full Charge Capacity (mAh):          5120
      Health Information:
      Cycle Count:          321
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          3023
      Voltage (mV):          11957
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Standby Delay:          4200
      Standby Enabled:          0
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      Standby Delay:          4200
      Standby Enabled:          0
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x00b2632f
      Charging:          Yes
    <Edited by Host>

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

  • My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?

    My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card.  I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card.  However, iMacs did.  Any suggestions?  Genius behind the Bar suggested wait for LION OS X release...

    You really don't need to post multiple times, you will get attention eventually.
    Find the reply here:
    MacBook Pro 13 (MBP 8,1 random restarts)

  • Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

    Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • My early 2011 MBP goes to sleep even when Sleep is turned off and the power is plugged in.

    Basically, it just decides to go to sleep after a few minutes of it being idle.  Searched around but I couldn't find a similar problem.  I've already tried resetting the SMC, but that hasn't fixed it. 
    Any ideas?
    It's a early 2011 MBP unibody, running Mavericks.

    Try checking the 2nd half of this link
    OS X: When your Mac doesn't sleep or wake

  • My Early 2011 MBP Has Just Started Running Extremely Hot.

    Hi there. As in the title I have an early 2011 MBP, 15 inch, £1550 model. I've been playing Football Manager a lot recently, and sure it runs at around 50-60 degrees but that's fine. However now i'm just on FireFox, been on for around 30 minutes, and my battery is being sapped as if I were playing a game and i'm at 60 degrees average with SMC at 5000 RPM as well as a notebook cooler which has a fan built in. Usually I run at around 30 on the internet, 40 is fine though.
    Any reasons why it is doing this? Nothing is running at over 5% in the Activity Monitor. FireFox seems to be spiking though, at like 30%. It's really annoying because I want to play Football Manager but when I put it on, it's at like 70/80 degrees. Super, super hot considering I have lots of cooling stuff. Any clues anybody, please!?

    "Nothing is running at over 5% in the Activity Monitor. FireFox seems to be spiking though, at like 30%."
    Do you have "All Processes" selected in Activity Monitor? If not, select it in the drop-down menu and then see whether there's something using a large percentage of your CPU.

  • 2011 MBP not dimming on battery power

    My new Early 2011 MBP is set to slightly dim the display on battery power and it is not dimming on battery power unless i go in to the energy saver preference and uncheck and recheck it then it dims slightly.

    Yes, the case is a heat-sink; Apple call them "notebooks" not "laptops" and warn against having them against your skin.
    "Do not leave the bottom of your MacBook Pro in contact with your lap or any surface of your body for extended periods. Prolonged contact with your body could cause discomfort and potentially a burn"
    MacBookPro_UsersGuide page 107
    Actually, you don't want heat near the battery itself as that's not good for li-ion, that should feel relatively cool?

  • Can't install windows 8.1 on early 2011 MBP

    Hey all,
    I'm having problems installing Windows 8.1 on my Early 2011 MBP (MacBookPro8,2). When my superdrive died I installed an SSD for the boot drive and kept the original hard drive as a secondary drive. I used BCA (modified to support USB) to create a USB 2 Windows 8.1 install drive from an ISO I previously created. I also had it partition the hard drive. When it reboots I get the "no bootable device found" and blinking cursor issue. I've tried holding down option and choosing EFI, but i've picked up during the last week that installing through EFI on my MacBook Pro isn't possible. Does anyone have any ideas on how to solve this?

    I ended up coming across this last night:
    http://malwaretips.com/threads/installing-windows-on-a-mac-with-a-damaged-superd rive.32474/
    I am in the process of testing this out, but currently I'm stuck with an issue with winclone not expanding the image of the usb install disk to use all the space in the partition. However I did boot into the Windows installer and didn't run into the "couldn't find partition" , "no bootable disk", or "not an MBR" errors I've seen before.
    I Think the key for non supported hardware and Windows 8 or later is to create the bootable usb in windows and not through BCA. I actually used the VMWare Fusion trial and a windows 10 technical demo image to do the monkeying around in windows. Hope this helps someone else. I'll keep updating.

  • Does anyone know if this HD works with a early 2011 MBP?

    Looking to upgrade my internal HD on my early 2011 MBP. Before placing the order, would like to get some professional advice.
    The HD being considered is:
    SAMSUNG Spinpoint M9T ST2000LM003 2TB 5400 RPM 32MB Cache SATA 6.0Gb/s 2.5" Internal Notebook Hard Drive
    Thanks in advance for all advice/inputs

    Oh, sorry, I didn't note that I am planning on using logic 8 to attempt this. I don't have access to a machine with logic and pro tools installed to try it myself, else I would.

  • AMD Radeon HD 6750M, Early 2011 MBP, 10.9.4 Problems

    Hello,
    Ever since 10.9.3 update I have a serious problem with my Early 2011 MBP with AMD Radeon HD 6750M card.
    First my configuration:
    MBP 2.2 GHz Intel Core i7 (Macbook Pro 8,2)
    16 GB RAM
    512 GB Sandisk SSD and 750 Stock HDD
    AMD Radeon HD 6750M and Intel HD Graphics 3000
    OS X 10.9.4
    I'm usually using my MBP with external display with a resolution of 1920x1080. The display is connected via DVI to Mini Display Port adapter. When I connect the external display, my MBP switches to the AMD card. Here's where the problems begin. If I'm using Davinci Resolve, Capture One Pro or any other software (that I use regularly) that uses the GPU extensively, the cpu usage will rise, the computer will start to feel sluggish and my productivity almost becomes none because even the simplest tasks such as opening another tab in firefox or safari takes anywhere between 1-3 sec. When the computer starts doing that, I cannot play a simple HD video at native fps and the whole machine basically becomes too expensive paper weight. The strange thing is that even after I quit all programs, the system cpu usage continues to be high, around 50% with kernel_task being the star using all this cpu and it keeps using all of this cpu forever, at least until i shut it down or disconnect the external display and manage to make it switch to the internal Intel gpu.
    The problem started after istalling the 10.9.3 update and it's still there with the 10.9.4 update. I even formatted the computer and reinstalled everything but the problem still persists.
    I haven't experienced anything like this on 10.9.2 and the machine was actually quite fast before that. Now, I have too expensive paper weight on my desk.
    Since the problem is very specific, I doubt many users will complain and I doubt Apple will ever do anything to fix it, at least until hopefully the new drivers in 10.10 fix the issue hopefully.
    My question is:
    1. Has anyone else experienced this and managed to solve the problem?
    2. How can I downgrade to 10.9.2? I don't have time machine backup but i have bootable usb with 10.9.2. Will it help?
    All best,
    Goran

    When you have the problem, note the exact time: hour, minute, second.   
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    ☞ Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Installing Windows 7 on Replacement SSD in optical bay Early 2011 MBP

    So i just bought a 120gb SSD and a optical bay enclosure that i installed into my early 2011 MBP. I also bought a optical drive external usb enclosure. I was hoping that I could use bootcamp to install Windows 7 onto the SSD but when i go through the bootcamp menu and my laptop restarts im stuck with a blank black screen. Ive also tried using bootcamp to create a bootable USB (which i had to do a work around to get to work because it supposed to only work for MBA) that didnt work. Can anyone help?

    ANYONE???

  • Early 2011 MBP - Won't install updates?

    Today was the first time I've used my MBP since finishing school for the year and I decided to try and install whatever new updates were recently released. However, whenever I hit the option to restart my mac to install the updates it... it seems to just return me to the log in screen, and when I check my Software Updates they're all still there waiting to be installed.
    Help?
    It's an early 2011 MBP, running OSX Snow Leopard 10.6.8. 2.3 Ghz Intel Core i7 with 8GB RAM - if that helps at all.

    Yeah, that probably would've helped, huh?
    The latest iTunes, iDVD, iMovie, iPhoto + the latest firmware and security updates.

  • MacBook Pro (Early 2011) keeps randomly crashing

    Anonymous UUID:       0688EE0D-6618-2FAF-D8F3-B0867B8E981A
    Tue May 13 20:43:55 2014
    panic(cpu 1 caller 0xffffff8004a526ff): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0xdeadbaefdeadbeef, bits changed 0x40000000000, at offset 224 of 328 in zone: HFS node"@/SourceCache/xnu/xnu-2422.92.1/osfmk/kern/zalloc.c:461
    Backtrace (CPU 1), Frame : Return Address
    0xffffff81d557b610 : 0xffffff8004a22fa9
    0xffffff81d557b690 : 0xffffff8004a526ff
    0xffffff81d557b6f0 : 0xffffff8004a51df9
    0xffffff81d557b7f0 : 0xffffff8004d5f6b9
    0xffffff81d557b870 : 0xffffff8004d61046
    0xffffff81d557b980 : 0xffffff8004d8319c
    0xffffff81d557bad0 : 0xffffff8004bff12b
    0xffffff81d557bb50 : 0xffffff8004bde798
    0xffffff81d557bbc0 : 0xffffff8004bec09d
    0xffffff81d557bdd0 : 0xffffff8004bebee1
    0xffffff81d557bf50 : 0xffffff8004e3e413
    0xffffff81d557bfb0 : 0xffffff8004af3b76
    BSD process name corresponding to current thread: Finder
    Mac OS version:
    13C1021
    Kernel version:
    Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    Kernel UUID: E9CF78E2-1E9F-3B6F-81A4-FEE6C6D0E4D5
    Kernel slide:     0x0000000004800000
    Kernel text base: 0xffffff8004a00000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 11176469302492
    last loaded kext at 9065830953384: com.apple.driver.AppleIntelMCEReporter     104 (addr 0xffffff7f86948000, size 49152)
    last unloaded kext at 9130776804419: com.apple.driver.AppleIntelMCEReporter     104 (addr 0xffffff7f86948000, size 32768)
    loaded kexts:
    com.apple.filesystems.afpfs     11.1
    com.apple.nke.asp-tcp     8.0.1
    com.apple.filesystems.smbfs     2.0.1
    com.apple.driver.AudioAUUC     1.60
    com.apple.filesystems.autofs     3.0
    com.apple.driver.AppleHWSensor     1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager     4.2.3f10
    com.apple.driver.AGPM     100.14.15
    com.apple.driver.AppleMikeyHIDDriver     124
    com.apple.driver.ApplePolicyControl     3.4.35
    com.apple.driver.AppleUpstreamUserClient     3.5.13
    com.apple.driver.AppleHDA     2.6.0f1
    com.apple.iokit.IOUserEthernet     1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AppleIntelHD3000Graphics     8.2.4
    com.apple.driver.AppleMikeyDriver     2.6.0f1
    com.apple.driver.AppleLPC     1.7.0
    com.apple.driver.AppleHWAccess     1
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.2.3f10
    com.apple.driver.AppleSMCLMU     2.0.4d1
    com.apple.driver.AppleSMCPDRC     1.0.0
    com.apple.driver.AppleThunderboltIP     1.1.2
    com.apple.driver.AppleBacklight     170.3.5
    com.apple.driver.AppleMCCSControl     1.1.12
    com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB     8.2.4
    com.apple.driver.SMCMotionSensor     3.0.4d1
    com.apple.driver.AppleUSBTCButtons     240.2
    com.apple.driver.AppleUSBTCKeyboard     240.2
    com.apple.driver.AppleIRController     325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
    com.apple.BootCache     35
    com.apple.iokit.SCSITaskUserClient     3.6.6
    com.apple.driver.XsanFilter     404
    com.apple.driver.AppleUSBHub     666.4.0
    com.apple.iokit.IOAHCIBlockStorage     2.5.1
    com.apple.driver.AppleFWOHCI     4.9.9
    com.apple.driver.AppleUSBEHCI     660.4.0
    com.apple.iokit.AppleBCM5701Ethernet     3.8.1b2
    com.apple.driver.AirPort.Brcm4331     700.20.22
    com.apple.driver.AppleSDXC     1.5.2
    com.apple.driver.AppleAHCIPort     3.0.0
    com.apple.driver.AppleSmartBatteryManager     161.0.0
    com.apple.driver.AppleACPIButtons     2.0
    com.apple.driver.AppleRTC     2.0
    com.apple.driver.AppleHPET     1.8
    com.apple.driver.AppleSMBIOS     2.1
    com.apple.driver.AppleACPIEC     2.0
    com.apple.driver.AppleAPIC     1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient     216.0.0
    com.apple.nke.applicationfirewall     153
    com.apple.security.quarantine     3
    com.apple.driver.AppleIntelCPUPowerManagement     216.0.0
    com.apple.security.SecureRemotePassword     1.0
    com.apple.kext.triggers     1.0
    com.apple.iokit.IOSerialFamily     10.0.7
    com.apple.AppleGraphicsDeviceControl     3.4.35
    com.apple.driver.DspFuncLib     2.6.0f1
    com.apple.vecLib.kext     1.0.0
    com.apple.iokit.IOAudioFamily     1.9.5fc2
    com.apple.kext.OSvKernDSPLib     1.14
    com.apple.iokit.IOSurface     91
    com.apple.iokit.IOBluetoothFamily     4.2.3f10
    com.apple.iokit.IOFireWireIP     2.2.6
    com.apple.driver.AppleHDAController     2.6.0f1
    com.apple.iokit.IOHDAFamily     2.6.0f1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.2.3f10
    com.apple.driver.AppleGraphicsControl     3.4.35
    com.apple.driver.AppleBacklightExpert     1.0.4
    com.apple.iokit.IONDRVSupport     2.4.1
    com.apple.driver.AppleSMBusController     1.0.11d1
    com.apple.driver.IOPlatformPluginLegacy     1.0.0
    com.apple.driver.IOPlatformPluginFamily     5.7.0d10
    com.apple.driver.AppleSMBusPCI     1.0.12d1
    com.apple.iokit.IOGraphicsFamily     2.4.1
    com.apple.driver.AppleSMC     3.1.8
    com.apple.driver.AppleThunderboltDPInAdapter     3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily     3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter     1.4.5
    com.apple.driver.AppleUSBMultitouch     240.9
    com.apple.iokit.IOUSBHIDDriver     660.4.0
    com.apple.driver.AppleUSBMergeNub     650.4.0
    com.apple.driver.AppleUSBComposite     656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.6.6
    com.apple.iokit.IOBDStorageFamily     1.7
    com.apple.iokit.IODVDStorageFamily     1.7.1
    com.apple.iokit.IOCDStorageFamily     1.7.1
    com.apple.iokit.IOUSBUserClient     660.4.2
    com.apple.iokit.IOAHCISerialATAPI     2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily     3.6.6
    com.apple.iokit.IOFireWireFamily     4.5.5
    com.apple.driver.AppleThunderboltNHI     2.0.1
    com.apple.iokit.IOThunderboltFamily     3.2.7
    com.apple.iokit.IOEthernetAVBController     1.0.3b4
    com.apple.driver.mDNSOffloadUserClient     1.0.1b5
    com.apple.iokit.IO80211Family     630.35
    com.apple.iokit.IONetworkingFamily     3.2
    com.apple.iokit.IOUSBFamily     675.4.0
    com.apple.iokit.IOAHCIFamily     2.6.5
    com.apple.driver.AppleEFINVRAM     2.0
    com.apple.driver.AppleEFIRuntime     2.0
    com.apple.iokit.IOHIDFamily     2.0.0
    com.apple.iokit.IOSMBusFamily     1.1
    com.apple.security.sandbox     278.11
    com.apple.kext.AppleMatch     1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.AppleKeyStore     2
    com.apple.driver.DiskImages     371.1
    com.apple.iokit.IOStorageFamily     1.9
    com.apple.iokit.IOReportFamily     23
    com.apple.driver.AppleFDEKeyStore     28.30
    com.apple.driver.AppleACPIPlatform     2.0
    com.apple.iokit.IOPCIFamily     2.9
    com.apple.iokit.IOACPIFamily     1.4
    com.apple.kec.pthread     1
    com.apple.kec.corecrypto     1.0
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i7, 2.7 GHz, 16 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Samsung SSD 840 EVO 500GB, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: Hub
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

    Aled24 wrote:
    Hi,
    My MacBook Pro 13 Inch early 2011 keeps randomly crashing, I have changed the RAM in the macbook from 2x2gb to 2x8gb if that helps? I have tried using "Apple Jack" to help identify the problem
    Be careful with AppleJack as it does not repair permissions with Lion and is reportedly completely broken under Mountain Lion.
    I would concur that Avast is involved in this issue and probably needs to be reinstalled or replaced by something less "intrusive".

  • Early 2011 MBP Slowing Down

    Hello, I have an early 2011 MBP (15-inch), system report below:
    MacBook Pro (15-inch, Early 2011)
    Processor: 2 GHz Intel Core i7
    Memory: 16 GB 1333 MHz DDR3
    Startup Disk: Macintosh SSD
    Graphics: HD Graphics 3000 512 MB
    Lately, my MBP has been slowing down a lot.
    I  tested out a bunch of flash sites, but it does not seem to be the problem. Like I said, I have 16gb of RAM (combined with what I have located above, i7, etc), and have had numerous  flash sites up, but no slowdown. The problem is recent, in that I've noticed it in the past 6 months. Nothing changed in that period at all to cause this problem.
    I've run this setup for a couple years without issue (SSD where the DVD player used to be, and the HDD where the old HDD was located), without issue.
    My MBP gets so hot that I have to move it frequently for scare of erythema eb igne (stupid technical term, but I might not be joking, and would rather not joke around about something like that.but seriously it get that hot where your only option is to shut off the MBP.  I know that might sound extreme. But my MBP gets that hot. Especially if you are running a program like Premiere. I understand the power and RAM that it takes to run a program like that, but it was shocking. This is a program (Premiere) I ran without problems previously.. 
    Checking activity monitor (and iStat), RAM does not seem to be the issue. CPU seems fine 88-90% usage,
    Usually have 7-8GB of RAM available, and the CPU usage under 90%.
    I have no idea, but I will be taking a can of compressed air to the MBP.
    I was just wondering if anyone had any other ideas or had similar situations to help me out?
    Thank You,
    T

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

  • Which kind of SSD hard discs do support with earlier 2011 MBP ?

    Which kind of SSD hard discs do support with earlier 2011 MBP ?
    I'm using 15 inch earlier 2011 MBP. I would like to replace hard disc to a new SSD hard disc to improve performance. But I don't know which kind of SSD works fine for it. Does anyone work fine? Could you give me some successful experience? Thanks a lot.
    BTW, Can I use SATA3 SSD? And any problems here?
    Thanks a lot!

    is it a hard questions?

Maybe you are looking for